1. Is the folding knife a control Tool?

Whether the folding knife is a control Tool, it is necessary to judge the shape of the folding knife.The control Tool refers to the dagger, triangular knife, spring knife (jumping knife) and other similar single blades, double -edged, and triangular knife.Specific standards need to be determined according to the "Deciphering knife Certification Standard".

The first article of the "Development Sword Identification Standard", who meets one of the following standards, can be identified as a control knife:

1. Dagger: with a single blade, double -edged or multi -blade tip knife with a knife handle, blade, and blood grooves.

2. Three -edge scraper: The Tool processing with three blades with three blades.

3. spring knife (jumping knife) with a self -locking device: After the knife is expanded or popped, the folding Tool that is fixed by the spring or card lock in the handle can be fixed.

4. Other similar single -edged, double -edged, and triangular tip knives: The pointed angle of the knife is less than 60 degrees, and the knife body length of more than 150 mm, double -edge, and multi -blade knife.

5. Other knife tip angles are greater than 60 degrees, and the knife body is more than 220 mm.

2. Can I bring the subway?

The folding knife belongs to items that can hurt others, which are prohibited from carrying.In addition, tearr, tear guns, tear guns, electric shocks, electric shock guns, defense, bow, crossbow, etc. with certain lethality; products such as nail bombs and bullets; kitchen knives, machete, beautiful workers, etc.tools, hammer, ax, cone, shovel, , picks and other tools, spears, swords, halberds, etc., as well as other sharp wares and blunt wares that can be stabbed, cut, scratched, cut injuries;Handcuffs and other military weapons and police tools are also prohibited from carrying the subway.

The characteristics of the common material of the Skin trench coat

The fabrics of common Skin trench coats mainly include nylon, polyester, and brocade polyester. Among them, the cost of nylon fabric is the highest, good elasticity, alkaline resistance, very wear -resistant, and Smooth and comfortable hand.Polyester fabrics are stiff, acid -resistant, high -temperature resistant, and anti -ultraviolet rays.Based on the proportion and characteristics of the component, the higher the proportion of the nylon composition, the softer the fabric.Based on the characteristics of several fabrics, the Skin trench coat made of nylon fabrics is softer, light, and comfortable. The Skin trench coat made of polyester is more Sun protection.

Different people choose Skin trench coat skills

1. Look at the body shape

The fatter is suitable for wearing vertical line segmentation, Smooth lines of Skin trench coat.Thin -thin people should choose the horizontal lines, and have a live -like complex Skin trench coat to supplement the deficiencies of the body shape and give people a strong feeling.

2. Look at the face shape

People with long faces should avoid choosing long -torn collar Skin trench coats, and it is more suitable for choosing large lapel -type Skin trench coats. People with round faces to choose sharp -collar Skin trench coats are more appropriate.

3. Look at the Skin color

People with white Skin and darker hair, can choose beige, light gray green, silver -gray, rose red and other colors to receive good results.For people with a little Skin and lighter hair, it is not advisable to wear purple, black, gray -green, red, etc.

4. Look at the color of clothes

Dark heat sucking heat, so all Skin trench coats are light.For example, orange can make people look cute, gentle and bright.White looks spiritual, and it shows good looks and good temperament.Pink, such as pink blue, pink yellow, pink, etc., all look soft and comfortable.Blue blue not only looks fair, but also very eye -catching.

5. Look at weight

The most basic concept of Skin trench coat is called a "Skin" windbreaker. It is thin and thin, and it is like a layer of Skin.Therefore, under the premise of functional indicators, the lighter the Skin trench coat is, not that some consumers think that "the weight is appropriate".

6. Look at workman

Skin trench coats should be windproof and waterproof, and workmanship is also important.The fabric is very good, but the suture is not tightly meticulous. The zipper is bad, or there are thread heads everywhere, which will cause wind leakage.Therefore, after determining the quality of the fabric, we must take a closer look at the workmanship, carefully check how the gap binds and the zipper are good, and strive to seek the clothes sutures and the zipper part of the workmanship.

7. Look at the brand

The quality of the product of large brands is often guaranteed, after -sales service is good, the production process technology is mature, the price is also reasonable, and the national supervision is also strict. Consumers can buy appropriate Skin trench coats according to their actual needs.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. Does the fishing rod and the stream rod are the same?

no the same.

The Table fishing rods and stream rods belong to the hand rods, but they are not the same fishing rod. From the perspective of the fishing rod itself, the Taiwanese Fishing rods and stream rods are different in length and number.In addition, the Table fishing rods and stream rods are also different.Because the two are different in many aspects, they are suitable for different situations, and they are different in their application. They cannot confuse these two Fishing rods.

2. What are the differences between the fishing rod and the stream rod

1. Differential length

The main difference between the table fishing rod and the stream rod is the length.Generally speaking, the stream rod is generally short, while the Taiwanese fishing rod is relatively long. This kind of fishing rod is mainly used when using the way of Taiwan fishing.

2. Differential sections

The number of two sections is also different.Specifically, the number of poles of the Taiwan fishing rod is relatively small, but each pole section is relatively long; while the stream rods are just the opposite, they have a large number of poles, but they are relatively short.

3. Differential difference

The weight of the two is different. The former is a relatively light pole, and the weight of the latter is relatively heavier.

4. Different degrees of portability

The portability of the table fishing rod and the stream rod is related to their rods.The number of rods of the table fishing rod is relatively small, it cannot be fully contracted, and it is not easy to bring.However, the number of poles of streams is large, and it is easy to shrink, and it is easy to carry.

Third, which is easy to use for Fishing rods and streams

The use of the stream pole and the table fishing rod is not necessarily better:

1. The stream rod is suitable for fishing in small individual fish such as catfish in small waters. Making fishing in small waters such as streams is definitely easier to carry.

2. Catfish with less than 1 or two, as large as tens of pounds or even hundreds of pounds of giant can be ease. It is better to fish in large waters or breeding ponds.The feel is better than the stream pole.

Therefore, in general, it is not sure which one is better to use the Table fishing rods and streams. It mainly depends on where fishing and what fish fishing.

1. Observation plant

The root system of leaf -viewing plants is relatively developed and grows rapidly, so the demand for Fertilizers is large. It can be applied twice a month during the growth period, and some organic Fertilizers that have been rotted in the soil can be added to the soil when the pot is changed.Just as base Fertilizer.

2. Flower plants

The most important thing for flowering plants is to open branches and leaves, so we must give it sufficient nutrients, otherwise it will cause malnutrition, and plants cannot bloom well.We can apply some nitrogen, phosphorus and potassium compound Fertilizers to the usual flowers, and apply some phosphorus and potassium Fertilizers before flowering, so as to promote plant flowering.

3. Faber -class plants

Subtatenium plants like to grow in a loose and ventilated soil, and its root system is thinner, so it must be applied thinly during the maintenance process. The fertilization amount is 1/4 of ordinary plants.If you fertilize too much fertilization, the plant may be harmful.

4. Ball root plant

The rhizomes of the ball root plants are relatively strong, but there are fewer roots, so there is no need to apply too much Fertilizer for it, because the absorption ability of the root system is weak, and too much fertilization will also be prone to Fertilizer.Some nitrogen Fertilizers can be applied before the growth period of the root plant, and some potassium phosphorus Fertilizers can be applied before the flowering period, which can promote the flowing flowers quickly.

5. bonsai plants

bonsai plants have less nutritional requirements. They can apply some fermented oil residue cake Fertilizer or Bone meal. They can slowly release nutrition and increase the nutrients of bonsai plants.The type and production of flowers and fats & gt; & gt;

Single electric car raincoatHow to stack

The folding method of a single electric vehicle raincoat is similar to that of ordinary hats. Turn the raincoat and fold the buttons. Fold the two sleeves to the belly.The width of the intention.At this point, the raincoat has grown, and the long strip is 30 % off, which is completed, beautiful and portable.(Note that you must dry and put it before putting it)

pairpeopleElectric carraincoatHow to stack

Double Raincoats are recommended to first have two hats, then fold or put the front hat into the hat behind, and then store like wearing a hat.

Electric car hat raincoat specific superposition method

1. Fold the raincoat hat to the right.

2. Fold the long side of the raincoat to the left.(Key points 1: make the upper and lower sides of the raincoat.)

3. Fold the upper and lower sides of the raincoat to the center, fold twice in total, and turn into a rectangular shape.(Point 2: Keep the raincoat flat when folding, so that the raincoat is convenient to save.)

4. Fold the left and right sides at one third of the three -thirds, and then complete the folding.(Point 3: Finally, fold into a small block or a small rectangle, so that put it in the bag, neither worry about occupying the place, nor is it conducive to the preservation of Raincoats.)

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;