2024-12

1. Can the fabrics sunscreen and sunscreen?

Tobules are a Waterproof material that can often see tunnels on trucks and trucks, and tents and tents also use tarpaulin.Generally, the tarpaulin is mainly used for waterproof, so can the tarpaulin be covered?

Generally speaking, most of the tarpaulin products on the market are both waterproof and Sun protection. They have the function of anti -ultraviolet rays and can shade and sunscreen. Therefore, you can see that many trucks will cover the campaign on the tarpaulin, which can prevent it from being able to prevent the tarpaulin, which can prevent it from preventing rain and rain.The exposure of the goods in the sun provides better protection for the goods.

2. How about the Shading performance of the sunbathing cloth

Tobules are both waterproof and sunscreen. The waterproof performance is generally very good. So what is the sun sunscreen effect of the tarpaulin?

There are many materials for tarpaulin, and the Sun protection performance of different materials will be different, but in general, the difference is not large. The new fabric Shading effect is very good;If you, the sun sunscreen performance will gradually decline. The fabric Shading function used all year round will decrease faster, and there may be no Shading effect in about five years.

3. What is the material of the rain -proof and Shading cloth

Rain -proof cannon cloth is a tunnel with a good waterproof and Sun protection effect. Generally, it is necessary to achieve a good rain -proof and Shading effect. The requirements for the material are relatively high. Generally, there are three main materials:

1. Sword scraper

The knife scraper is also anti -aging, waterproof and sunscreen, which is definitely very practical for the transportation industry. The transportation process will inevitably be stubborn, and high -speed high -speed wind is also very large.

2. PVC oil cloth

This kind of cloth is woven with polyester silk. A layer of Waterproof material is sprayed outside to form a waterproof layer, so that the fabric can have the effect of waterproof, Sun protection, and mold.Durable, tearing resistance is better than traditional.

3. Organic silicon cloth

Organic silicon cloth is an artificial synthetic material. In addition to the characteristics of waterproof and Sun protection, it is also resistant to acid and alkali. Organic silicon cloth is breathable light and dustproof.It will not be easily damaged and strong, and it is very suitable for the transportation industry.

What should I do if the flowers are pale?

1. Improve the soil

1,reason

The soil in the Flower pot may be the reason why the soil is alkaline.When planting plants, if alkaline soil is used, it is more and more alkaline in the long run, especially in the northern region.If the breeding is southern flowers, it will also cause damage to the plants, resulting in the weaker growth, and the leaves will become yellow.

2, Solve

The soil in the Flower pot is alkaline, and it can replace the richest acidic soil of humus. When changing the soil, be careful not to hurt the roots.It can also be gradually improved using acidic Organic fertilizer, and it can also adjust the pH of the soil to improve the problem of soil Whitening.

2. Adjust water quality

1,reason

Not only the soil is alkaline, but also the degree of water quality is also very high. In the case of long -term watering, the environment in the Flower pot will generally appear alkaline, which will cause soil blank.

2, Solve

Dry the water before pouring flowers to control the water and alkali to a certain extent. Drip a small amount of white vinegar in the water when watering, and you can also pour a bit of fermented rice water solution.Nutrition.

Third, reduce Chemical Fertilizer

1,reason

During the flowering process, using too much Chemical Fertilizer will cause alkaline salt, and the content of inorganic salts in the soil will be presented on the surface of the soil.

2, Solve

You can use chemical Fertilizers as appropriate. If possible, you can apply some Organic fertilizer.

How can the flower soil knot be loose

1In the daily maintenance process of green plants, you should often give green plants loose soil. You can add some coarse sand and perlite to the soil, so that the soil of the plate is loose.

2Most of the soil boards are lacking Fertilizer. In daily maintenance, you can use rice water, fish farming water, etc. to pour green plants to improve the fertility of the soil and avoid soil plate knots.

3In addition, the soil with a powerful plate can be changed directly, and some river sand, cornography, corrupt leaves, etc. are added to promote the growth of plants with sufficient base Fertilizer.

4When pouring flowers, pay attention to use sand to pour the flowers, use a thick straw, insert it into the soil, add sand to the straw, and then water it. Pay attention to avoid the root system of the green plant.

5In the usual maintenance process, if you see that the green plants are not strong and the leaves are yellow, you can apply a little Organic fertilizer to the green plant to supplement the soil nutrition and make the soil fertile.

How to clear the small flying worm in the flower soil

oneHigh temperature treatment

If the small flying worm in the flower soil is produced during the preparation of the flower soil, then it can be removed by high temperature disinfection. First of allAfter half an hour of cooking, the flyworm eggs in the flower soil can be eliminated.

two, Exposure

The small flying worm produced by the flower soil can also be removed by exposure.First of all, you need to observe the weather. Choosing a consecutive week is a sunny period. The flower soil is evenly paved on an open space without a shield.

three, Spray pose

If the small flying worm in the flower soil is attracted by the planting flowers, it can be treated by spraying a potion.First of all, you need to purchase a dedicated pillow -dewrangine from the market, mix it in the water according to the proportion, and then spray the diluted solution on the flower to remove the flyworm.

Four, Mixed medicine powder

Flying insects attracted by flowers can also be removed by mixed medicine powder.First of all, you need to remove the flowers from the soil, then renovate the soil, and mix the pink powder to the soil after mixing the pink pour of the mixed pyrarodinol. This can prevent the flowers attracted by the flowers and breed the eggs in the soil.

1. What should I do if the suction cup cannot be sucking

1. Water

The most commonly used method is to dip a little water on the back of the hook before the suction cup is linked to the wall, and then quickly stick to the wall.Although this method will be a little better than not dipping water, the effect is still not ideal.

2, soapy water

If you need better effect, you can use soapy water. It also applies soapy water to the back of the suction cup, and then quickly sticks to the wall. After drying, you can hang things. The effect is very good.

3, egg white

It will be more troublesome to use egg white. You need to separate the egg white in the egg first, and then use a cotton swab to apply the egg white on the back of the hook.Pay attention to the hook just sticking to the hook immediately. Do not hang things immediately. When the egg whites are completely dry, it usually takes about 12 hours. At this time, under the influence of the egg white, the suction cup will become very strong.Worried about falling often.

4. Toothpaste

If you feel that the egg white is more troublesome and wasted, you can use the simpler and often used things in life to replace. The best is toothpaste.Squeeze an appropriate amount of toothpaste on the back of the suction cup, and then stick to the corresponding position. When the toothpaste is almost combined with the hook, you can hang things.The effect of this method is also very good, which is better than applying water or soapy water.

2. How to stick to the suction cup

1. Cold water method

Drop a little cold water in the hook suction cup, use the middle point of the suction cup, quickly press the hook to the wall surface, so that the air in the suction cup can be squeezed out, so that the hook is firmly sticking to the wall surface.The method is not long -lasting, the air can easily penetrate into the suction cup, and the hook may fall.

2. Hot water method

Put the suction cup into the hot water of about 70 degrees, soak it for fifteen seconds, and quickly paste it on the wall surface. This method is more effective than the cold water method, but the suction cup is not durable enough.

3. Hand cream method

Apply an appropriate amount of hand cream on the inner wall of the suction cup, then turn on the hair dryer, use the hot air to blow the inner wall of the suction cup to semi -dry, then wipe off the excess oil on the suction cup, and then stick the hook on the wall surface.Immediately became tight and durable.

4. Toothpaste method

Take an appropriate amount of toothpaste on the inner wall of the suction cup and press the suction cup to press on the wall. After almost twelve hours, the firmness of the hook will be greatly enhanced. At this time, you can hang things with peace of mind.

It should be noted that the cleanliness of the wall can also affect the linked gravity before the sticky lane hook.clean the wall surface before sticking, and force it from the middle to the surroundings when sticking, press out the air in the suction cup, the less the air, the better.

It is reported that this event will be launched at the Red Bean Industrial City at the end of February 2018. Through the theme of the five constant ways of benevolence, righteousness, ritual, wisdom, and faith, cooperate with professional design teams to use green to use greenOrganic and environmentally friendly materials, replaced the old appearance of the manhole cover of the Red Bean Industrial City, also tailored a set of new clothes full of red Beans for the red Beans.It is believed that different color collisions can make the original cold manhole cover instantly active, adding a unique landscape to the public welfare publicity of beautiful red Beans, and also conveys the environmental concept and green character of red Beans.

At the same time, Red Bean Men's care will pay attention to environmental protection. The whole year will be replaced in key stores across the country with the theme of "spring bloom", "summer vitality", "autumn Jingmei", and "winter wild".Graffiti window.Use different themes to interpret the natural beauty of the four seasons, express their love and longing for a better life, and call for green transmission.At the same time, the colorful four seasons will also give customers a different colorful experience. It will also renew the window of red Beans and men's clothing, put on the "green" four seasons costumes, and also make the green concept of "beautiful Chinese beautiful red Beans" echo in different cities.New retail of men's clothing adds color.

In fact, it is not difficult to find that there is such a kind of existence around us.When you see it or not, it is there, there is no gorgeous coat, no color of the soul; every day coming and going with the bustling, but there is no stay that belongs to them.The whole air, the manhole cover here, there is no temperature, the window here, there is no color, but when they are in colorful coats, you will find that they can also be beautiful!

one,How to clean running shoes

tools: Old toothbrushes or soft brush, hard cardboard, rags, decontamination cleaner

1Don't wash shoes too frequently.After the shoes are made, there will be a general loading volume, that is, the foot body body feels when you try it on.After you pass through for a while, you will find that the shoes will feel a little loose because of the heat and moisture of the feet itself.

Every time I wash my shoes, I find that the shoes seem to have tightened again.That's right, it will be tighter after the shoe washing and the sun exposure.This may cause the body feel of your original running shoes.Therefore, do not wash shoes too much.

2After the surface of the Running shoe appears dirt or colored marks, apply an appropriate amount of water or detergent on the old toothbrush or soft hair brush (the ordinary decontamination cleaner can be used). Gently wash it, and then rinse it with water.

It must be noted that because many running shoes use some reflective materials to print or eager technology, they cannot use strong brushes during the cleaning process, let alone nails or weapons.At the same time, the time of washing should not exceed more20In minutes, and ensure that the temperature of the water does not exceed45.

3After the rinse is cleaned, place the ventilation and cool place to avoid direct sunlight and exposure, and avoid using heating or light fire to dry, so as not to cause aging, gum, fade, and severe deformation.

It is not recommended to flatten the wet shoes when it is air -dry.

4The insoles and laces can be rinsed directly with water after drawing. The color of some shoelaces is too bright and dirty. You can buy a few more spare shoelaces.

5In order to help run the shoes to maintain the original shape, you can put some hard cardboard or other filling in the shoe when drying, and support it.

2. How to keep running shoes correctly

1. Wear running shoes only when Running.

Among all sneakers, running shoes may be the most suitable for walking shoes, but the slight friction with the ground with the ground for many years will still wear the sole.And if wearing running shoes and other sports such as basketball, while affecting the life of running shoes, it will also increase the risk of injury.

2. Put it in the right way/ /Take off your shoes.

When we are in a hurry, we often plug our feet directly into the shoes.After a long time, it will cause irreversible deformation to the shoe part.

3. If you do nt wear the running shoes for a long time, it is stored in a cool place after cleaning and drying it inside, so as not to mildew.

4. Different roads have a huge degree of wear on running shoes. Running on the road is far more than expenses on the forest road.In the case of conditions permit, try to run on a professional runway such as plastic.

5. Friends who run every day, it is best to prepare more than two pairs of running shoes in order to replace it every day.

6. Before you put on running shoes and run, it is best to place it in the ventilated place for a day so that running shoes can be dry enough.

7. Athletes or friends who love Running should often wear the shipping shoes purchased.

8. Although the little rabbit has told everyone how to clean the shoes correctly, in order to extend the service life of the shoes, wash as little as possible.

9. The nylon mesh cloth and artificial tanning leather on the running shoes are relatively easy to maintain, and can be washed with a sailor.

10. Try not to wear on rainy days, snowy days, and sun exposure, a pair of running shoes should be "rest" for two days. Wearing the same pair of shoes for a long time will accelerate the aging and gel of shoes. Proper "rest rest."It can restore the shoes and keep dry, which is also conducive to relieving foot odor.

running shoes are important to us during Running. It can be said that it is the only equipment requirements for runners. Maintain well and clean it correctly to make your beloved running shoes accompany you longer.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;