lighting lamp installation method of various lamps for various lamps installation precautions

lighting brand

The installation of lamps in home decoration should be detailed, because it must be used for a long time and cannot be easily damaged, otherwise it will affect family life.Let's take a look at how the lamps should be installed in home decoration.

1. Before installation, the lamps and its accessories should be complete, and there are no defects such as mechanical damage, deformation, paint peeling, and lampshade rupture.

2. According to the installation venue and use of the lamp, the minimum cross section of the wire core of each lamp should meet the requirements of the relevant regulations.

3. When installing electrical lighting devices in the masonry structure, embedded hooks, bolts, screws, expansion bolts, nylon plugs or plastic plugs should be used; wood wedges are strictly prohibited.When the design is irregular, the bearing capacity of the above fixed parts should be matched with the weight of the electrical lighting device.

4. In large risk and special dangerous places, when the height of the lamp is less than 2.4 meters from the ground, a lighting lamps with a rated voltage of 36 volts and below should be used or protective measures are taken.The lamps must not be installed directly on the flammable items; when the surface of the lamp is high -temperature parts*nearly flames, the heat insulation and heat dissipation measures should be taken.In the substation, the high -voltage, low -voltage power distribution equipment and the parent line should not be installed with lamps.The height of the Outdoor installation is not less than 3 meters away from the ground; when it is installed on the wall, the height from the ground should not be less than 2.5 meters.

The wiring requirements of the lamp snail mouth lamp head

1. The wiring should be connected to the terminal of the center contact, and the neutral line should be connected to the terminal of the thread.

2. The insulation shell of the lamp head should not be damaged and leaked.

3. For the light head of the switch, the switching handle should not have a naked metal part.

For ceiling lamps equipped with incandescent bulbs, the light bulbs should not be close to the lampshade; when the distance between the bulb and the insulation platform is less than 5 mm, the heat insulation measures should be taken between the Light bulb and the insulation platform.

The installation requirements of the lamp

1. When the steel pipe is used as a lamp, the inside of the steel pipe should not be less than 10 mm; the thickness of the wall of the steel pipe should not be less than 1.5 mm.

2. The lamp lines of the chain lamp should not be tensile, and the light line should be compiled with the crane.

3. The ends of the soft lines of the soft line chandelier should be used as a protection buckle, and the core wires at both ends should be tin.

4. Lights installed in the same room or place, the heart line deviation should not be greater than 5 mm.

5. The fluorescent lamp and high -pressure mercury lamps and its accessories should be used for use, and the installation location should be convenient for inspection and maintenance.

6. The fixation of the lamp should be firmly available.The screws or bolts for each lamp should not be less than 2; when the diameter of the insulation platform is 75 mm and below, 1 bolt or screw can be used.

Special lighting requirements

Emergency lighting and evacuation instructions used in public places should have obvious signs.Public places without special personnel should be equipped with an automatic energy -saving switch.

Each lamp should be installed on the phase line.The wire of the street light is introduced from the airline, and a waterproof bend should be used at the entrance of the lamp.

36 installation requirements of lighting transformers below

1. There should be short -circuit protection on the side of the power supply. The rated current of the fuse should not be greater than the rated current of the transformer.

2. Any end or CITIC point on the shell, iron heart, and low -voltage side shall be grounded or zero.

lighting requirements fixed on the mobile structure

Its wire should be laid on the inside of the mobile architecture.During the mobile architecture activity, the wire should not be tensile and worn.

When the weight of the chandelier is greater than 3 kg, the embedded hook or bolt should be used; when the soft line chandeliers weigh more than 1 kg, a Hanging chain should be added.

installation requirements of metal halide lamps

1. The installation height of the lamp should be greater than 5 meters. The wire should be connected by the wiring column to the lamp, and the surface of the lamp shall not be available.

2. The lamp Tube must be used with a trigger and a current restricator.

3. A reflective lighting lamps installed on the ground should take protection measures.

installation requirements of decorative lamps embedded in the ceiling

1. The lamp should be fixed on the special framework. The wire should not be close to the lamp case, and there should be a balance in the light box. The frame of the lamp should be close to the ceiling surface.

2. The frame of the rectangular lamp should be parallel to the decoration of the ceiling surface, and its deviation should not be greater than 5 mm.

3. The open lamp lamps of the fluorescent lamp Tube should be arranged neatly, and the interval tablets of the metal or plastic should not be distorted.

The installation requirements of lanterns

The diameter of the diameter of the fixed lanterns shall not be less than the diameter of the lamps and the hook, and shall not be less than 6 mm.For large lanterns, the fixed and suspension device of the crane lamp should be performed by 1.25 times the weight of the lamp.

The glass hood of large lamps installed in large places should take measures to prevent splashing downwards according to design requirements.

installation requirements of neon Lights

1. The lamp Tube should be intact and no damage.

2. The lamp Tube should be fixed for the dedicated insulation bracket, and it must be firmly available.Specialized bracket can be controlled by glass.The minimum distance between the fixed lamp and the surface of the building and the structure should not be less than 20 mm.

3. The length of the lamp for the dedicated transformer for neon Lights shall not exceed the allowable load toxic.

4. The installation location of the neon lamp specialized transformer should be hidden and easy to repair, but it should not be installed in the ceiling, and it should not be touched by non -inspectors.When it is installed, the height should not be less than 3 meters; when it is less than 3 meters, protective measures should be taken; waterproof measures should be taken during Outdoor installation.

5. The secondary wires of neon lamp -specific transformers and the connection between the lamp between the pipes should be used.

6. The distance between the two wires of neon Lights and the surface of the building and structure should not be less than 20 mm.

The installation requirements of chandeliers

For ordinary Hanging wires, if the lighting weight is below 1 kg, it can be lifted directly with a soft guide line and more than 1 kg. If the Hanging chain is lifted, the soft wire should be in the iron chain to prevent the wire from being tensile.

When the soft wire chandelier is buckled in the suspension box and the lamp head.When a sip of the steel pipe as a lamp, the inner diameter of the steel pipe is generally not less than 10 mm.For those who weigh more than 3 kg of lamps, the connection with the ceiling must be hook or bolts that are embedded.Fixed hooks such as fixed steel cannot be less than 6 mm in diameter.

When a fixed large chandelier is hung with a dedicated twist, it should be done: the spiny wheel of the twisted car must have a available locking device; the tensile strength of the twisted steel wire rope should not be less than 10 times the weight of the lanterns.The installation of the lamp must be anti -shock.When the metal shell of the lamp must be grounded, the ground bolt should be connected to the ground network.

When the lamp uses the screw -mouth lamp head, the phase line should be connected to the top of the lamp head, and the screw mouth is connected to the screw.The garden light should be installed with a fuse.Install lamps must be burned.When a variety of lamps are in the flammable structure or installed in a wooden ceiling, fire prevention or heat insulation should be performed around the lamp.Boured tungsten lamps cannot be installed on wooden or other flammable materials.Install lamps to make itself line with the indoor building lines.The side of the rectangular lamp should be parallel to the decoration of the ceiling.When the lamp is installed symmetrically, its vertical and horizontal central axis should be on the same straight line.Multi -mounted opening lamp lamps.The arrangement of the lamp should be neatly arranged.

precautions for installation of lamps

First of all, the most basic requirement of lamp installation is to be firm.

When the bedside lamp, table lamp, mirror front lamp, floor lamp, Wall lamp, etc. are installed in the room, the height is less than 24m and below. The metal shell of the lamp should be reliable to ensure the safety of use.A ground wire should be added at the lamp box during the wiring.

When installing various types of lamps, the installation instructions should be installed according to the requirements of the lamp.In addition, the dark line in the ceiling or wall plate must be protected by flame retardant sleeves.When the lighting weight is greater than 3kg, it should be installed with embedded hooks or directly fixing the sling frame from the roof (the lamps cannot be installed with a Hanging top keel bracket).The wire application hose led to the light head box box is protected to the lamp to prevent the wire from being exposed to the flat top.

When the bathroom and the kitchen are equipped with short -feet lamp heads, the porcelain snail mouth is short.The wiring and phase line (switch line) of the threaded lamp head shall be connected to the central contact terminal, and the zero wire is connected to the threaded terminal.

The most important and basic and most basic in the installation process: the lamp head with switching and other switches. For safety, the opening handle should not have a naked metal part.

maintenance of lamps

lighting must be used at the scheduled voltage and frequency.

All ground lamps must be checked frequently.

Special restrictions and specified lamps are generally used when the ambient temperature is 5-35 C.

The lamps used indoors cannot be moved outdoors.

Electrical, gas, kerosene stoves and other heater or their components or places directly encounter steam should not be used.The lamp cannot exceed the specified lamp.When changing the Lights and disassembling the cover and the fuse, the power must be cut off.

Safety lighting lamps should be checked to ensure that no abnormalities occur.

The accident lamps cannot be used after the Lights are urgently turned on at high temperature gas (140 degrees Celsius), and new lamps should be replaced.

Do not place paper and cloth such as near the Lights or cover the lighting.

There must be no places to repair lamps with dangerous objects such as gas and steam, but should be carried out in general places; when not in progress, safe operation must be guaranteed.

Wipe the lamps with warm water scrubbing or worting soapy water. Do not scrub with gasoline and volatile oil.

The metal part of the lamp cannot be used at will.

The dust behind the lamp should be cleaned with a dry cloth or dumplings.

When abnormal conditions occur during the use of lamps, use it to stop using, cut off the power, and check.

Which plants are suitable for the ward/ /flower

1Make a gentleman

Making gentlemen is definitely a symbol of healthy flowers. Its flower language is good health. It is the most suitable for people who are not suitable for physical discomfort.This plant is also a traditional Chinese medicine, which has a good medical effect that allows people to restore health as soon as possible.Although its flowers are small, the color is very pure red, which can also symbolize the vitality of the fire.

2,marigold

Listen to Wan Shouju's name, you know that this is a flower symbolizing health and longevity.Wan Shouju's significance is friendship and health. This small flower is a very tenacious plant. Its vitality is very powerful and the color is very bright. It is as vibrant as its name.But it should be noted that we need to know that some people do not like chrysanthemums, and we must understand before sending.

3, Four -leaf grass

The flower language of the four leaf grass is lucky. Its first leaf symbolizes true love. The second leaf represents our most valued health. The third one actually represents our reputation.Fortune, only four leaves are all in Qi, is a truly lucky person.It will have health when having four -leaf grass, so it is also a healthy flower.

4, Peony

Peony flowers are a graceful and luxurious flowers. We often use national color and fragrance to describe peony. However, at the same time, peony flowers also symbolize wealth and peace. Health is also an indispensable element.Sending a bouquet of peony flowers not only health, but also the meaning of wealth and peace. It is a good flower that wishes early recovery in the body.

5, Snow Lotus

Snow lotus is a rare flower. Although it is not common, it often sees its name on TV.Legend has it that this is a flower that can treat 100 poisons, which will restore our body to healthy.Therefore, snow lotus flowers are a kind of flower symbolizing peace and auspiciousness. The snow lotus in the vast snow really has a feeling of healing people's hearts.

6, Carnishment

In addition to carnations, it is actually a flower representing motherly love, but also a flower that symbolizes healthy.Carnation is a perennial plant.There are many carnations, and most of them are stroke.The color is also very diverse, not only bright and scent.Carnations are also the most popular cut flowers now. It is a kind of healthy and beautiful wishes. It is better to give patients.

Which potted plants should not be placed in the ward

Although some flowers and plants are very beautiful and full of floral fragrance, they may also cause some human diseases or deepen their original diseases, so we need to pay special attention when choosing.

In the potted plants, the soil may also carry some fungal spores or bacteria that will diffuse to the environment.These spores and bacteria may also cause certain infections to the patient's respiratory tract, Skin, brain, or wounds. Undoubtedly, this is no doubt for those who are already embarrassed.

Although some blooming plants are placed in the ward, they are not necessarily beneficial to the patient's health. It is also possible to release some substances that are not good for the human body. For example, some plants will emit alkaline substances and cause chest tightness and dizziness.

The plants that are not suitable for placing in the ward are: lily flowers, night incense, narcissus.

Avadas is a variety of fragrant flowers. It mainly affects the human nervous system. If it is allowed to be in the scent of daffodils for a long time, it will easily cause damage to the human nervous system.

Ye Laixiang is a sensitive plant with pollen. It can cause some symptoms of breathing of some asthma patients, and it is also easy to cause some patients with heart disease and hypertension.Don't place it in the ward.

Lily flowers are a fragrant flower. Its fragrance may have a great impact on some patients with neurasthenia, which will cause these patients to be overwhelmed by God, so it is not suitable to be placed in the ward.

Not all flowers are harmful to patients.Many flowers have auxiliary treatment effects on human diseases, such as: chrysanthemums, plum blossoms, gardenia flowers and other plants can play a role in sparse air dissipation auxiliary treatment of headaches; rhododendron, winter, and thousands of red have a phlegm and cough treatment of the respiratory tract.The role of the disease.Although some flowers are beneficial to the human body from the perspective of pharmacology, some drugs also have interaction, so we must pay attention to related health knowledge in the ward.Essence

1. color lanterns

color lamp art is the comprehensive decorative art of the lamp.In ancient times, its main role was lighting. Paper or silk was used as the lantern Skin. The skeleton was usually made of bamboo or wooden bars. Put candles or light bulbs in the middle to become a lighting Tool.

There are many small bulbs on each color lamp, but each color lamp has only one external connector. Generally, it is required to connect220VOn the lighting circuit, the color lamp is connected in parallel in the circuit.That is, a line is a fire line, a line is a zero line, and then colorful Lights are on the street.Like a Light bulb at home, each one is accessing220VIn the circuit.

Second, candle

In literary and artistic works, candles have the symbolic meaning of sacrifice and dedication, which can add romantic atmosphere to the room.

Three, aromatherapy

1Most of the aromatherapy essential oils are refined from the fruit, flowers, leaves, leaves, roots or seeds of the plant. It has antibacterial, sterilization, detoxification and other effects. It can reduce the amount of bacteria in the air for about half an hour.

2It can purify air, improve air quality, and shape no pollution human survival space.

3It can promote metabolism, reduce fatigue, and help maintain respiratory skills.

4, Adjustable physiological functions, beauty and beauty, soothing mental stress, promoting spiritual spirit, and improving work efficiency.

5The aromatherapy can create a Romantic atmosphere, romantic aphrodisiac, and promote lust.

Fourth, process ornament

Putting a incense burner ornament in the living room or study room is also very Zen's artistic conception. The cute and cute Rulai Buddha not only beautifies the home environment, and has a high -level enjoyment with visual and smell.ceramics are retro, strong and environmentally friendly materials, which look retro and noble, round and Smooth, and the symbol of high aspirations. The details are very realistic and the craftsmanship is particularly good.

5. Creative table

1""mateo"Rural desk is an excellent supplement to any space, and it has a more simple, industrial or rural flavor. It is also a style suitable for any size space.

2, glass bed

3, The amethyst table, the expressive geographical design

Six, table lamps

The desk lamp is mainly decorative, which is convenient for reading, studying and working.The table lamp has far surpassed the value of the table lamp itself, and the table lamp has become a artwork.Under the concept of light decoration and heavy decoration, the decoration function of the table lamp is even more obvious.In addition to reading and decoration.The latest technology is also like robots. It can move, dance, automatically adjusts, play music, clocks, videos, touch and other functions, especially the ceramic technology table lamp also has the value of collection.What role does lighting play in home life?In the night, the light is an elf, and it is the creative expert of a warm atmosphere.Through the level of light and shadow, the space is more vital; during the day, the lamps are turned into the decoration art of the living room. It is dotted with furniture, fabric, and decorations.

Seven, small speakers

The functions of small speakers are very complete. It does not need to consume mobile phone electricity. It is a professional portable music device for carriers.Built -in rechargeable lithium battery can work2to5An hour, the charging time is only needed2to3Hour.bringFMRadio, insertUDisk orSDAfter the card, you can display the first song when playing, which can be played directlySD/MMCCard,Uplate,,ofMP3Format audio file.No need to switch, remember to read automatically.

How to deal with sunburn

1. Care with cold compress: Cold compress helps to neutralize sunburn. When cold compresses, you can put the towels or clothes in cold water orrefrigeratorIn the middle, take it out and twist (without dripping), and then apply it to the Skin.When moisture gradually evaporates, it will have a cooling effect, which helps control sunburn and pain.Apply 3-4 times a day, about half an hour each.You can also use gauze to dip the saturated physiological saline or water. After the refrigerated room is placed in the cold, it is applied to the tingling site. After about 20 minutes, remove the burning sensation and help reduce the symptoms of Skin redness.

2. Use lotion care: It can be applied to 1 % hydrogenated lotion on the sunburn site, which is also helpful.Apply pain in the pain area 3-4 times a day, do not wash it off immediately, stay on the Skin for 5--6 hours.It is better to cooperate with cold compresses when it is applied for the first time.

3. Apply Cucumber juice: Apply Cucumber juice to the painful Skin for 10 minutes, cool into the Skin, and the pain will naturally reduce.Cucumber juice is rich in moisture. The vitamin C contains vitamin C can enhance the Skin's regeneration ability. It can not only supplement the moisture lost in the Skin, but also treat the peeling phenomenon.After applying, rinse it with water.

4. Use tea to apply hot compress: Use cotton balls to dip tea and light the sunburn place, which can nourish the Skin and reduce the burning sensation.Because tea contains tannic acid, it has a good effect of promoting convergence, which can reduce tissue swelling and reduce cell exudation. It is very useful for slight sunburn without stormy Skin.If the area of sunburn is too large, you can also add strong tea to the face of your home to soak the sunburn Skin in the water for a few minutes, the effect will be more significant.

5. Apply aloe vera juice: Apply the gel -like juice in the aloe vera on the sunburned Skin, so that the juice is dry naturally.In addition to helping the injured Skin rehabilitation faster, when the Skin appears burning pain due to sunburn, applying aloe leaf liquid also has the effect of immediately reducing and cooling.

precautions for repair after sun exposure:

When you go home, do not wash your face immediately.Instead, it is necessary to wash your face with wet water after the Skin is reduced to normal temperature. It is best to use milk and honey to moisturize thermal insulation effect.After cleaning, you can apply some Skin care products with a lot of moisture on your face. When applying it, don't forget to apply some on the neck.If it is an instant firing mask, you can temporarily do not apply Skin care products.

Of course, sunscreen is very important, but sometimes it is inevitable that the sun has more sun. The Skin feels hot and hot, indicating that the melanin has begun to start stupidly. Get the emergency maintenance within 12 hours after the sun. Everything comes!

After the sun, rescue guide

1. Supplement to water: After the sun, the muscle dehydration, the first step to prevent dry wasteland

The Skin is sunny, and the keraton water evaporates, and it will be thick and dry when it feels. The first thing to do is to "solve the thirst of the Skin". Drink a large glass of water and apply it with spray or wet.water.

Step1. Spray on the face: about 20 cm from the face, spray water for about 3 seconds, and then pat it with your hands to allow the moisture to penetrate the Skin.

Step2. Wet the cheeks: tear the lotion into thin slices, soak it with a moisturizing spray or lotion into transparent shape, put it on the cheeks for 10 minutes.

2. Cooling down: Wrap the cold mask, instantly lower Skin temperature

The increase in Skin temperature will stimulate inflammation and melanin hyperplasia. Therefore, the Skin temperature should be reduced after hydration. It is recommended to use a cold mask designed for post -sun -exposure to apply heat to the muscle surface to absorb heat and effectively reduce Skin temperature.

3. mask repair therapy is fatigue after the sun, and reappear vitality

Unless the Skin has been sunburned (with redness or peeling), it is possible to use a moisturizing or Whitening mask after the sun! People who deliberately spots can choose a Whitening mask to prevent it, and the dullness and pigmentation of metabolism have formed.

4. Soothing the Skin to apply the mask, moisturizing and bottoming sensitivity

After the sun, the Skin is more sensitive and fragile. Doctors do not recommend applying the mask directly, which may cause sensitivity (because the Skin is sealed, which increases the Skin temperature). It is recommended to use a moisturizing gel first, and then apply the mask. The absorption power is not affected.

What kind of furnace is good for boiling tea in the stove?

1. charcoal stove

There are many choices for stoves. The most well -known of which are the small red mud stoves in Chaoshan. Japan is more famous for white mud stoves and wind furnaces.The mud furnace may be heated slowly, which requires patience. At this time, a person is in a daze, or a while with friends and relatives, eating fruits or snacks.It is best to use a pottery stove to boil tea in the furnace. Although the carbon does not have a bright fire when the barbecue is to cook tea, the temperature is still very high. The pottery itself is refractory material. It will not break at high temperature. It can also protect the desktop and other furniture.The shape of rough pottery material is simple and antique, which can also increase the sense of tea cooking.

2. electric ceramic furnace

If the charcoal stove is troublesome, or if the charcoal burns is not safe, you can consider using a pottery furnace. Although the atmosphere brought by the carbon fire is less, it is better than heating efficiency. It can be used indoors. Some models can adjust the temperature.The temperature of the electric ceramic furnace can be adjusted, automatic power off, and overheating protection.And relatively small size.

3. Alcohol

Is it good to cook tea in alcohol?Portable alcohol stoves use medical alcohol as fuel, so when burning, not only smoke, odorless, bright fire burning, safe and healthy, but also very environmentally friendly.Safe, smoke -free, and tasteless bright fire steaming tea and tea cooking are completely different from traditional methods such as induction cookers and electric pots.

Boil tea for the stove is better to use carbon or electricity

Cooking tea in winter, carbon furnace tea and electric ceramic furnace heat, there is no difference in height.I see this view from the Internet: Baked tea with a charcoal stove is more quaint and more high -level than ordinary electric ceramic furnaces.In fact, from an objective perspective, in modern life, electricity heating is more efficient and practical.Conversely, there are many limitations to heating with charcoal stoves.

1. Boil tea with a charcoal stove, the advantage is obvious.On the one hand, it is suitable for friends to meet friends, similar to Camping popular in summer, as long as the desktop is placed in place to take beautiful dinner pictures.On the other hand, it can also warm up the furnace, which is quite antique.However, although tea is good, there are many problems that need to be faced.For example, boiled tea to boil tea is slow, and if you want to successfully cook a pot of tea, it is very patient.For example, to endure the smell of charcoal burning, even if it is specially purchased to buy smoke -free charcoal, it will produce smoke smell more or less when burning.If it is indoors, it is necessary to ensure ventilation; if it is outdoors, considering the uncertainty of the heating of the light fire, you must avoid combustibles.

2. If it is said that the use of a charcoal stove to boil tea is better than the sense of atmosphere.Then, in modern life, it is more practical to cook tea with electric ceramic furnaces.

electric ceramic furnace, just heat up with electricity.Saves additional charcoal costs.Do not worry about the burning of charcoal, causing a series of troubles, such as the smell of smoke, the bottom of the black tea set, and even the color on the wall.At the same time, the efficiency will be heated with electric ceramic furnaces, which will greatly shorten the time of cooking a pot of tea.

What pot is used for boiling tea in the stove?

The choice of tea cooking appliances is mainly the difference between the tea kettle material. Different materials will not only affect the thermal insulation and thermal conductivity of the pot, but also affect the taste of tea.Tea cooking equipment can be used with glass or pots. It is best to use silver pots conditions. Do not use iron pots.

1. glass pot

Because the glass pot is transparent, we can see the condition in the Teapot at any time, know when you can invest in tea. After entering the tea, you can know if the tea is cooked by watching the color of the tea soup.

Therefore, for novices who have no experience in cooking tea, cooking tea with glass pot is the best choice.It should be noted that the glass pot heat dissipation is fast, so it is suitable for cooked and drinking.

2. Tao pot

If you are very sure about the amount of tea and the time of tea cooking, you can choose a pot pot.

The pot pot itself has adsorption effects, which can play a certain purification effect on water, making the tea mouth more Smooth, delicate at the entrance, and the taste of tea and tea.However, the speed of boiling water will be slightly slower.

3. Silver pot

Of course, if the conditions are better, it is also possible to cook tea with a silver pot.Cooking tea is the first choice of silver pots. The material of the silver pot is pure, and there are very few impurities. Boil water with a foot silver kettle, and the Teapot tea pot is pure, strong and long -lasting.

4, iron pot should not cook tea

It is just not to pay attention to cooking tea with iron pots, because tea polyphenols will have a chemical reaction with iron, affecting the taste of tea soup. When cooking tea, continuous high temperature will cause chemical reactions in the material in the tea and tea leaves.Soup color and taste.

What carbon do you use to cook tea in the furnace

During tea, charcoal is the most important role. Try to use less smoke or smoke without smoke, such as longan charcoal, Wulan charcoal or walnut charcoal.The charcoal made of litchi wood and longan wood has a faint fruit fragrance; the Chaoshan people love olive charcoal. Its heat is relatively stable and the most suitable for stewing with slow heat.Charm.

1. olive charcoal

It is one of the four treasures of Chaoshan Gongfu's tea.It is mainly used for small furnaces of red mud. Because the olive charcoal has a small size, it is not suitable for the furnaces with large holes, it is easy to fall, and it is easy to block the furnace. It is very charcoal, but the taste of tea is good.

2. walnut carbon

The advantages are flammable and no odor, and the firepower is also very good.It is very good for the small stoves on the table, and the cooked tea is also sweet.It's a little expensive.

3. fruit charcoal

fruit charcoal is also very easy to use, it is easy to ignite, and it has aroma.Because its production process is not as long as it is burned out of the kiln, the sound is not as crisp than the burning of the earth kiln, and it is also very easy to ignite.It is best to ignite outdoors.

4. Chrysanthemum charcoal

The high -quality hard birch wood is refined, and the water without smoke, roasted, and tea is also very sweet.Because there are chrysanthemums on the section, it is called chrysanthemum charcoal.And the quality is very stable. Generally speaking, such chrysanthemum charcoal is exported to Korea.But it is not cooked tea but for barbecue.

5. Wu Gang prepare long charcoal

The king of charcoal must first choose the old tree's birch wood to burn it. It is made of special crafts. It can become charcoal in 30-40 days, and its section is very beautiful, like silk, and the hardness is very high.The sound of knocking is like a steel.This kind of charcoal disadvantage is that it is not easy to get charcoal, and the ventilation around the stove is very good.The price is also very high.

6. Mechanical charcoal

The selection of mechanism charcoal is very miscellaneous, but they are all materials containing wood fibers.It is very environmentally friendly without smoke, easy to make, no odor, and the gray is also white, because the price is also very suitable, so people in the south are basically used it.It is also possible to burn indoors, but be sure to remember ventilation.