Flower Fertilizerself mademethod

1. Homemade nitrogen fertilizer

nitrogen fertilizer is the main Fertilizer to promote the growth of flowers, stems, and leaves.Molding the moldy Beans, peanuts, melon seeds, rackets, or picking the remaining vegetable leaves, bean shells, fruits or pigeon dung, and expired Milk powder, etc.The big cola can can be filled with water, and then seal the fermentation and rot (can sprinkle some pesticides).

In order to make it rotten as soon as possible, it can be placed at the sun to increase the temperature.When all these substances in the tank sink, the water is dark and no odor (about 3-6 months), indicating that it has been fermented and rotten.If it is summer, you can remove the upper layer of Fertilizer water and water after 10 days, which can be used for topdressing or directly used as base Fertilizer, and then add water to continue to be used.The residue can be mixed in the flower soil.

2. Homemade phosphorus Fertilizer

Pour the remaining pork Bone heads, waste fish intestines, poultry feces, fish bones, fish scales, crab shrimp shells, miscellaneous bones, etc., pour into the tank and add an appropriate amount of fermented agent (anaerobic type) to add a small amount of water, keep the humidity at 60 at 60%-70%, sealed, can be used in water after a month of fermentation.This is a very good basin flower base Fertilizer. If it is made and fermented, it becomes a rich flower Fertilizer.

In addition, you can also use the eggshell to wash the eggs, dry it under the sun, mashed it, and then put it into a mulch into a powder.Mix and mix with eggshell powder and pot soil at a ratio of 1: 3 to cultivate flowers on the pot.It is also a long -acting phosphate Fertilizer. Generally, the active ingredients will be precipitated during the watering process after planting, and it is absorbed and utilized by flowers.After planting flowers, the flowers blooming from the flowers are large and bright, and the fruit is full of fruit. It is a completely organic phosphate Fertilizer.

3. Homemade Potassium fertilizer

Drink the remaining tea residue, rice water and water (after fermentation) and plant -gray water, wash milk bottle water, etc.They are all good potassium Fertilizers, which can be used directly to pour flowers.These substances contain a certain amount of nutrients such as nitrogen, phosphorus, potassium, etc. It is used to water the flowers and trees, that is, it can maintain soil water and add nitrogen fertilizer to the plant, which can promote the root system and lush branches.And it has a significant effect on improving the ability of flowers to resist and resist disease and insect pests.

4. Homemade Compound fertilizer

After eating pork ribs, sheep ribs, and beef pork, put the remaining bones in a high -pressure cooker. After steaming on the heat for 30 minutes, it is broken.Bone dandruff: Mix well at a ratio of 1: 3 in river sand. You can be used as a flower base Fertilizer. The ground is 3 cm at the bottom of the Flower pot.This Bone flower Fertilizer is a complete Compound fertilizer with sufficient nitrogen, phosphorus, and potassium, which is beneficial to the growth and flowering of flowers.

5. Traditional Chinese medicine residue flower Fertilizer

The remaining residue after the decoction of traditional Chinese medicine is a good Fertilizer Fertilizer.Because most of the traditional Chinese medicines are the roots, stems, leaves, flowers, flowers, real, Skin, and the limbs, organs, shells, and some minerals, which are rich in organic matter and inorganic substances. The nitrogen and phosphorus required for plant growth required, Potassium fertilizer can be said to be an all -around flower Fertilizer.

Put the drug residue into the container such as the tank, bowl or can, mix it in the pot soil, and mix some water. For a week or two, the drug residue is rotten and fermented. It can be used after becoming humus.Generally, the medicinal residue is placed in the basin as the bottom Fertilizer, and it can also be mixed directly into the cultivation soil.This kind of traditional Chinese medicine residue Fertilizer has a lot of benefits to the planting of flowers and trees, and it can improve the permeability of the soil.

Note: It is not advisable to put the medicine residue too much. Generally, the income ratio should not exceed one -tenth, but it will affect the growth of flowers and trees.

Second, the tips of nutrition to raise flowers

1. Be beer wonderful use

Beer raising flowers so it will have a good effect because beer contains a large amount of carbon dioxide, and carbon dioxide is an indispensable substance for various plants and flowers for metabolism, and beer contain nutrients such as sugar, protein, amino acids, and phosphate.Growth.

(1) Pour flowers.Watering flowers with an appropriate amount of beer can grow the flowers and the green flowers, which can not only make the flowers sufficient nutrients, but also absorb particularly fast.The specific method is to use water and beer to be mixed evenly at a ratio of 1:50.

(2) Spray blades.After mixing with water and beer according to the ratio of 1:10, spray the blades, and can also receive the effect of fertilizing outside the root.

(3) Wipe the blades with beer.Observation flowers and trees can be dipped in beer with abandoned cotton or clean soft cloth, and gently wipe the leaves.Because the blades can directly absorb nutrients, the leaves of the flowers are more green and shiny, and the texture of the blades also looks thick.

(4) For flower arrangement.Pour 1/10 beer in the vase, which can make the flower arrangement more glorious, and can extend the viewing time for several days.

2. Sour vinegar

In flower planting, vinegar has an inexplicable effect, and it has a wonderful use of poor growth flowers.Spraying it in flowers and leaf surfaces after mixing water can promote the growing strong of plants, reducing the disease, and blooming and full of flowers.

(1) Northern flowers in the north and southern flowers. When watering in the pot soil, mixing an appropriate amount of vinegar can promote the absorption of trace elements such as phosphorus iron and prevent branches and leaves from yellowing.

(2) Spraying leaves and flower buds with a vinegar solution of about 40%can accumulate photosynthetic products, increase the flowers, leaves more green, and the flowers are more bright.

(3) Pot flowers with Organic fertilizer will have a smell of smell in the room. If the appropriate amount of vinegar can eliminate the odor, it can also make the soil sterilize and disinfect it.

(4) Dip cotton balls dipped in vinegar and leaves, which can make the rated insects, red spiders, aphids and other turmoil, and then sweep it down to eliminate it.

(5) Spray alkaline drugs (stone sulfur agents, antibacterials, Fumei doubles, etc.) If you have medicine, spray an appropriate amount of vinegar solution on the branches and leaves to reduce drug damage.

(6) Preparation or applied alkaline drugs, wash hands and rinse utensils with vinegar water to remove the residual medicine and play a disinfection effect.

The method of baby kicking

Practice one:

Materials: There are loose bands, two buttons, scissors, needles, lines.

step:

1. First of all, prepare the above raw materials.

2. Cut the loosening band with scissors with the same 4 sections of the same length. When the loosening tightness, you should not be too tight to prevent the baby's arm or leg, and then sew the loose band into a circle.

3. Then take two points on the position of the quilt to cover the feet, and sew the buttons to be sewn a bit to prevent the baby from biting the buttons.

4. Finally, put the sewn tightly on the baby's legs and arms. After covering the quilt, you can buckle the buttons.

Practice 2:

1. Find a quilt, find two points from the middle of the quilt to suture a little on the quilt.

2. Then sew a band on each corner of the quilt.

3. Then tie the band to the horizontal columns on both sides of the small bed or on a hollow vertical bar.

4. If you make great achievements, no matter how you kick your baby, you won't be cold.

Practice three:

1. Prepare the idle small blankets at home, and then fold them on both sides. At this time, pay attention that the position of the child's arm should not be sewn, because the role of the sleeping bag is to avoid children's kicking quilt when it is cool.

2. In addition, after the blanket is folded, two buckles can be sewed on the shoulders to prevent the child from going up. Of course, you can also sew one on one side and sew a zipper on the other side, so that the child can be worn.

3. In addition, it is recommended not to be too fat, because it is too fat to keep warm, of course, don't be too thin. If you are too thin, you will be tied too tired.

Practice 4:

In addition, there is also a traditional way to buckle method: Mom can choose a small quilt, take a loose band, wrap the baby from the chest to both feet with a quilt, just show his hands and tie the tight tightness on the chest and waist.This approach is very economical. The small quilt can be ready. The cost is about 1 to 2 yuan, and the cost is very small.

1. Do you need to clean your new Baby sleeping bag?

Any material Baby sleeping bag will have bacteria or pollutants such as fungi or granular dust during the production process, because the baby's new sleeping bag is like a babys new clothes.It is best to clean it before using the sleeping bag. Washing it or rest assured. It is best to wash it under the sun.

2. How to wash your Baby sleeping bag

infantSonsleeping bag cleaning methods should be analyzed in detail. If the sleeping bag is not too dirty, it is recommended to be simple and cleaned locally.Types such as necklines and feet.

If the sleeping bag is dirty and needs to be cleaned comprehensive, then the method of cleaning different materials should be distinguished, as follows:

1. Plel sleeping bag

1) The sleeping bag is soaked in warm water. Pay attention to the water temperature cannot exceed 30 degrees Celsius.

2) Select special feather cleaner to clean your sleeping bag.

3) Gently pat and rub, do not twist.

4) Rinse with water after washing until there is no foam.

5) Press the water out of the water after rinse. As for the ventilation, slowly dry it with low temperature, and constantly interrupt the drying program. Take out the sleeping bag to find a piece of wet velvet gently and rub it.Fluffy.

2. Cotton sleeping bag

Chemical fiber cotton Sleeping bags and fleece Sleeping bags can be washed directly in water with 30 degrees Celsius. You can also choose a drum washing machine to clean it, but do not flip to dry, avoid chlorine drift, and hang it with multiple places when drying to avoid sagging.Be careful not to iron the cotton and sleeping bag.

The storage of Sleeping bags is not recommended for long -term compression and storage, so you need to choose a storage bag with a large and breathable and good breathability in custody, so that it is in a fluffy state. It is important to use the taboos of down products. It is important to put it in a dry and ventilated place.After using the sleeping bag, expose the sun as much as possible, and blow the quality of the sleeping bag.

1. What are the types of fishing gifs?

The types of fishing nets are diverse, but they can be roughly divided into inflatable raising nets, thorns network Hanging nets, ground cages, dragons, pull nets, lift nets, and floating fishing nets.

1. Eliminate the net:The inflatable network can give full play to the three -dimensional breeding efficiency of the reservoir. It has the advantages of strong water body adaptability, convenient use, excellent fishing effect, and not easy to hurt fish.

2, thorns, Hanging nets:The length of the thorns and Hanging nets will be determined according to factors such as waters and fishing boat size. It is tens of meters short and the longest can be thousands of meters.

3, ground cage net:The ground cage net is suitable for catching shrimp, crab, small fish, etc. in ponds, gutters, lakes and other waters, and has the advantages of high fishing rate, low cost, and convenient use.

4. Drag to the net, pull the net:Dragoning and pulling nets belong to large nets, which are mainly suitable for places with flat seabeds and most of the coasts.

5. Lift the net:Lift the net is a Fishing Net Tool caught in the water. It has the advantages of time -saving, effort, effort, low cost, not easy to hurt fish, and fast speed of the net.

6. Floating Fishing Net:Floating Fishing Net is an efficient Fishing Net designed with unevenness of fishing environment such as fish ponds or reservoirs and difficulty fishing.The advantages of fish.

2. How much is a fishing gifs?

I have learned about the types of fishing furniture, so before buying, do you know the price of fishing nets?How much is a fishing grid?

In the current Fishing gear market, the price of fishing grids is between 10-500 yuan, and the price range is so large because the types, uses, materials, scale, etc. of Fishing gear are large.You can choose your own needs.

1. The working principle of GPS code watch

The GPS code table is a satellite positioning system, such as one or more of GPS/GLONASS/Beidou/Galileo. After receiving the sky satellite signal, the speed, distance, time, and height data are calculated., Power data.Finally, the intuitive and rich cycling data is obtained.

Almost all GPS code tables use the US GPS positioning system, but some code -watch manufacturers combine the advantages of GPS and other positioning systems to send a double -star positioning function.

2. The purpose of the GPS code table

The GPS code can display riding data such as distance, speed, altitude, temperature, heart rate, step frequency, and some very practical small functions, such as automatic backlight, automatic registered circle, line navigation, etc.

1. Heart rate monitoring: Heart rate monitoring Belt a sensor of the biological electrical signal (ECG signal) generated by myocardial excitement during the heart activity of the heart.

2. Step frequency records: Piece sensors are used to calculate the sensors that people step on the number of people per minute during cycling.The unit is: turn/minute.Installed on a bicycle or a crank after the bicycle.

3. Power records: The power meter is installed in the rear wheels, plates, cracks, pedals, or middle shafts. It can calculate how much sensors do people do in real time during cycling.

4. Automatic backlight: After GPS positioning, get position coordinates to obtain local sunrise and sunset time.Turn off the backlight an hour after the sunrise; turn on the backlight an hour before sunset.

5. Automatic regulation: It is divided into two types: distance measurement circle and location. When the distance is meter, a fixed distance is set. After the ride completes a fixed distance, it can be calculated.After the position is planned to move to the position where the circle point is located, it is suitable for ride around the circle.

6. Line navigation: Analyze history or plan riding data generation road books, providing precise navigation and returning flights.

Because each brand has different ideas and layouts of product design, the above points do not represent the functional attributes of all brand products.

Third, the GPS code table is better or ordinary code table

1. record principle

The GPS code watch uses a single and multiple satellite positioning systems for positioning, and then analyzes and shows through the GPS module in the code watch, and records various cycling data.

The traditional code table is to complete the record through the magnetic head induction.

2. Data function

The cycling data recorded by the GPS code can be as many as dozens of items, and it can be uploaded to the back -end websites of each GPS code watch brand or connected to the mobile phone APP for data analysis and data sharing.

The data that can be displayed by traditional code tables is limited, and data cannot be analyzed and shared.Many times you often need to take pictures manually to share sexual data sharing.

3. External device connection

The GPS code can be obtained with more comprehensive and rich cycling information through ANT link external devices, such as heart rate bands, stepping device, power meter, etc.

Traditional code tables can only be restricted. Except for a small number of high -end traditional code tables that can connect to the tramotor and heart rate band, other external equipment cannot be connected.

4. Convenience

The GPS code watch is simple to operate, and there is no need to set the step diameter and other steps. You can install it by installing the bottom of the gauge or extending the bracket.If there are multiple bases and brackets, a GPS code can be used for multiple vehicles.

The operation of traditional code tables is cumbersome, especially the wired code watch is called a technician killer. The aesthetics and convenience are deducted.

5. Power consumption and price

Rider who insists on using traditional bicycle giameters will use power consumption and price as an important factor in choice.A button battery of a traditional code watch can usually endure tens of thousands of kilometers, while the purchase price is only hundreds of yuan.The GPS code is limited by power consumption. In the case of low power consumption, it can only be battery life for 20-30 hours, and the price is often from several hundred yuan to thousands of yuan.However, in fact, this is a question of wise wisdom, and demand and purse determine everything.