1. What is the carbon machine equipment

The charcoal machine is the raw materials such as bamboo and wooden sawdust, Peanut shell, corn stick and other raw materialsCrushed into a granular shape within 10mm through the wood chips crusher. After drying the dryer, put it in a carbonized furnace for charcoal machine. The full set of equipment of the charcoal machine includes a pieces, a dryer, a stick maker, a charcoal furnace, conveying, and conveying.Planet and other.charcoal mechanismcharcoalIt is a kind of waste renewable energy fuel, smoke -free and non -toxic, clean and hygienic, which can be widely used in the field of home heating and barbecue food; industrial aspects can also replace coal or heavy oil -boiled steam boilers.crystal silicon and other materials; agriculture can also be used to improve ground temperature and improve the soil.

2. What is the working principle of charcoal charcoal machine

The charcoal mechanism uses some waste, such as branches, straw, straw, Peanut shell, tree trunk, cotton straw, tea seed shells, fruit shells, weeds, leaves, etc. These substances contain biomass fiber that can produce charcoal.It was crushed to a powder below 10mm by the pieces, and then dried 88 % of the water through the dryer. After the entry rod machine was put in a carbonization furnace for carbonization through high temperature and high -pressure molding, and finally transported the finished mechanism of charcoal by the conveyor.

3. How much is a charcoal machine equipment?

The price of charcoal machines should be calculated to calculate the price of a full set of equipment, including crushing machines, dryers, roders, carbonized furnaces, conveyor:

1. The price of the pieces is relatively low. Generally, the crushing machines equipped with the charcoal machine are small pieces. Generally, it is about 56,000 yuan.Select the size of the raw material.

2. The rod machine is an indispensable core component of the charcoal machine, so it cannot be saved in this regard. The price of the rod machine ranges from more than two to 20,000.

3. The dryers equipped with small charcoal machines are generally air -flow dryers. The price is similar to the stick maker. When selecting, the machine should be selected according to the quality and price of the machine.

4. High efficiency of carbonization furnaces. The use of distilled carbonization method can collect wooden gas and wood scorched oil generated during the carbonization process and return to the furnace to reduce carbonization flue gas. Due to the high production cost of carbonized furnaces, the market quotation is compared to compare the market quotation.Chaos, from 20,000 to 100,000, the specific price should be determined according to performance and product quality.

5. The conveyor is a device that connects the machine to transport raw materials and finished charcoal. The rubber transportation or spiral transportation can be used. The price of the conveyor is generally not expensive. It is about 700 yuan per meter.

In summary, the price of the full set of charcoal equipment is about 50,000 to 80,000 yuan. If you buy a full set of equipment, you generally make a discount on the basic equipment quotation, which is cheaper than buying alone.

1. What types of garden cuts

1. Pruning

The use of branches, cutting and cutting flowers and trees is the main method of coordinating the reasonable growth of various parts of the flower and trees, maintaining tree shapes, promoting flowering results, and preventing and controlling diseases and insect pests. More importantly, the incision is neat and not easily damaged.

It can be trimmed throughout the year. If the trees in the spring and summer are long -term, you can cut the diseased branches, withered branches and weak branches at any time, and cut or cut short branches.Before trimming, divide the growth direction of the branches and buds, and to choose correctly.A branch bar is usually bud eyes on the left and right sides. If you want to make the branches develop to the right, the branches are cut short in front of the right side of the ideal length of the branch.Because the buds of the trees have the advantages of the top growth, the buds at the top of the branches are the fastest. After the growth of the new branches on the right side, it has achieved the purpose of developing to the right, and vice versa.

Scope of application: various small plants pruning, shrub fruit trimming, etc.

2. Gardening big scissors

The edge of the garden scissors (branches) is round, which is used to trim bushes.When cutting the pruning, the force used makes the upper blade gradually enter the branches, and the lower mouth plays the role of supporting the branches, and the branches do not break.In addition, branches are very effortless to use.General scissors have scalable designs, which can adjust the force arm suitable for different users!

It is, but before you start, make sure that the scissors and plants have a 90 vertical relationship (to prevent the cutting of the shear from constantly being awkward), and try to get the end of the blade near the plantYou will find that the blade and knife handle of ordinary scissors are not in the same plane. It is also a effortless design for the consideration of leverage.The three words are summarized: fast, accurate, and ruthless!

Scope of application: shrubs trimming, grass pruning, etc.

3. Coarse branches

Rough branches are also known as branches cut, vigorous cuts, and high -cut.Garden cutting tools can cut 0-4 cm coarse branches, similar to tiger pliers, which are a must-have for wooden tree.The shape of the knife head is straight, the berth shape or the mouth shape of the knife, and the hand is cut.Although the quality of rough branches is generally reliable, it should not be cut dry and soft wood.

The rough branches cut two blades are different. One is to use the use to cut one is blunt thick used to squeeze so the use method is similar to pruning (pay attention to the cut part of the cut part and remove the section), but when operating, it must be based on the branch.The length of dryness and your strength to adjust the length of the force arm (most of the rough branches are scabbing design now).

Scope of application: trimming and shrub trimming.

4. High -altitude cutting

High -altitude cuts are composed of fixed cuts, cutting slices, cuts, and sawing, and are installed on the same centered axis in turn.Among them, the fixed scissors are consisting of integrated shovel, hook knife composition (outer shovel hook).The cutting piece is parallel to a spine wheel, and the scissors are matched with a scissors to form a scissors.

The cutting handle is a suite, and the built -in activity adjustment mechanism can tease and shrink in the air (extended or shortened the shear), and use the principle of leverage to determine the power arm length.There are spiny paws with a handle, which can mobilize the spiny rotation and pruning operation.There is a positioning buckle on the saw handle, which is matched with the buckle door set on the fixed scissors.

Scope of application: high -altitude garden trimming, fruit tree trimming, etc.

2. What are the use of Gardening?

1. Reasonable distribution of branches and leaves.That is, on the basis of plastic surgery, the branches and leaves of each part of the crown are adjusted dense, distributed direction, and leaf area coefficients to maximize the effective photosynthetic area of the canopy.

2. Adjust growth and results.Make the nutrition growth normally but long; the appropriate amount is flowers, strong but not weakening the trees; at the same time, it can prevent the fruit tree from aging in advance and update the reunion in time.

3. The proportion of branches composition.Different tree species and age requirements have corresponding and appropriate proportion of branches in order to enable the operation, distribution and consumption, accumulation of nutrients in the age of the year growth cycle, and coordinate according to the normal growth and reproductive rhythm.

4. Pruning can also balance the growth potential between group plants and the main branches on a plant, so as to achieve a balanced output and facilitate management.In addition, trimming is also a means to coordinate the growth of the ground with the root system.

1. How to make up the hook and stick off the wall Skin

1. Putty powder

Usually, the walls of the house are scratched, which is putty powder.In this case, there are different wall defects caused by damage to the wall. Just find a place to buy some putty powder to make up.If you ca nt find any shop around, you can also buy it through the form of online shopping, and the operation is very simple. Apply it with an appropriate amount of putty powder in the defect and then Smooth the putty powder.

2. latex paint

In addition to putty powder, there are sprayed latex paint on the walls. We can also use putty powder to make up the defect.After the adding putty powder is dry, use the latex paint of the same color to spray it to make up the defect.

3. Chalk, glue

If the defect is not large, and the rented house just wants to deal with it, then you can get a white chalk; after grinding the chalk, mix the glue with a brush or a toothbrush on the defect of the wall.

4, canned paint

There are canned spray paint for cars on the Internet. You can buy a can in the defect.However, this method is mainly to change color changes when the wall Skin is dropped. If there is defects on the wall, it is recommended to make up the defect before spraying the paint.

Second, hooks on the wallHow to take it down

1. Wind oil essence

The hooks on the wall can be taken down with wind oil essence. Just a few drops of wind oil must be dripped on the hook suction cup and the wall surface is fitted. Wait for about 20 minutes to drop the wind oil essence.At this time, you can easily remove the hook.

2, boiling water

Put the boiling water droplets at the gap between the hook suction cup and the wall, and then use a rag to wet on the boiling water and cover it on the suction cup. After a few minutes, the glue in the suction cup will be softened due to high temperature, and the hook will change.It won't be firm, you can easily remove it.

3,hair dryer

If the stickiness is too large, you can't take it with your hands. You can use the high temperature file of the hair dryer to blow the sticky hook to take it for 2-3 minutes (the specific time is softened by the sticky glue).hook down.

4. Small knife

If it is adsorbed on the wall, if it is an adsorption hook, you can insert other slender and hard items into the gap between the suction cups and the wall after using the small knife. After the air enters the suction cup, the pressure in the suction cup will keep everything with the outside world, and it will lose it will lose, and it will lose it.Suffering naturally falls off.

1. What pants are paired with Baseball uniforms

There are many ways to match Baseball uniforms. Baseball uniforms with pants can refer to the following:

1. Khaki pants:As a kind of warm color, khaki color is used to have no trace of burden and abruptness. This type of pants can be used for spring. The combination of Baseball uniforms will not appear positiveThe vitality of unruly juvenile.

2. jeans:Getting rid of the classic bondage jeans, it seems that people always feel its capable and gas field. The jeans that can be available in all seasons are not the leftovers in the eyes of everyone.Casual and generous.For example, the combination of black and white or contrast, so that the style of the upper and lower styles is more fashionable, and it can present the free and easy -going of the Baseball jacket and the randomness of jeans.Personality and college atmosphere.

3. Workpiries:The workpieces have become a must -have for the wardrobe of a person. At first, the trousers were not worn, but later the unique style made it a fashionable first choice for many tide people.Personality.

4. Casual trousers:Not only limited to the trousers of the workplace, it is also very practical for daily life. The trousers imagined may be officially serious, but in fact, the popularity of casual trousers has far exceeded your imagination. With the leisure of Baseball uniformsIt is very appropriate to match the suit pants.

2. Can Baseball uniforms be paired with skirts?

The Baseball uniform can be paired with a skirt, and the effect is also good. You can refer to the following skirt style:

1. With long skirt

Baseball with a long skirt and a long boot, the gas field is full.Micro -type girls, I suggest you choose a H -shaped long skirt, with the function of covering the meat.

2. With leather skirt

The cool leather skirt and Baseball uniforms are combined to make you handsome and more sexy.You can put it on a corner of the waist and use careful machine to show your long legs.

3. Match a mini skirt

The skirt is slightly longer than the Baseball uniform. A slightly exposed skirt is exposed, using the designs of exposed Skin to reduce the sense of Baseball uniforms, and it is lighter to wear.In addition, the mini -skirt must choose leisure models. Cotton and linen materials, knitted materials, and woolen materials are all possible, with some grids and striped patterns more beautiful.

1. What is the paddle of kayak

The paddle of the kayak is called a kayak, which is an important equipment for the kayak.The karlet is made of wood or carbon fiber. It is mainly composed of paddle rods and ends at both ends. The two paddle leaves are 82 ~ 90 .The kayak paddle has three types: flat head shape, feather -shaped and curled wing shape. There are two types of disassembly paddle and non -demolition paddle on the structure.Disassembly paddle has a metal Sleeve in the middle of the paddle, which can adjust the length; the length, weight, and size of the non -demolished paddle are selected according to the athlete's gender, body, physical strength, and technical style.

Second, is the paddle of kayak saving leverage?

The paddle of kayak can be regarded as a lever. The distance from the resistance point to the fulcrum is greater than the distance from the force point to the fulcrum.

The characteristic of labor leverage is that it can save distance but require greater force.In the kayak competition, athletes need to produce pussy for paddle. Although the paddle is a laborious leverage, it can help athletes use their strength more effectively to promote the forward of kayak.

Third, the name and type of kayara pulp

1. Name

(1) Plastic slurry: Plastic pulp is the most common type of kayak. It is made of plastic. It is cheap and suitable for beginners.

(2) carbon fiber slurry: carbon fiber paste is a kind of light and high -intensity pulp, which is made of carbon fiber with a higher price.It is suitable for professional players or high -level enthusiasts.

(3) glass steel slurry: glass steel pulp is also a common pulp, made of glass fiber and resin.It is more expensive than plastic pulp, but it is cheaper than carbon fiber paste.Suitable for medium -level enthusiasts.

(4) Wooden paste: Wooden pulp is one of the traditional kayaku materials, which is made of wood.It is rarely used now.

2. Types

(1) Direct paddle: straight paddle is the most basic kind of pulp, which consists of a straight pole and a paddle.Niged paddle is suitable for beginners and is easy to master.

(2) Jacking: Bending is a twisted slurry. It can better adapt to the natural posture of the human body and reduce the fatigue of the arms and shoulders.Bend paddle is suitable for long -term paddling enthusiasts.

(3) Feather slurry: Feather pulp is a professional level of pulp. It consists of multiple paddle leaves and can adjust the angle and depth.Feather pulp is suitable for competitive players.

(4) Paddy: Paddy is a pulp composed of two paddles, which can improve the promotion and stability.Pagoda is suitable for medium -level enthusiasts.

(5) folding slurry: folding pulp is a convenient hand that is convenient to carry, which can be split into several sections for storage and transportation.folding pulp is suitable for travel kayak enthusiasts.