1. How to wear the curtains

1. Small pleated wear method

Put on 1, 2, 3, and 4, that is, the four-to-teeth hook's 4 inserted pins are inserted on the serial number 1234 hole on the cloth band, respectively.4 holes.

2. Mid -fold traditional wear method

Put on 1, 2, 4, and 5, that is, the four -to -teeth hooks are inserted into the target number 1245 hole on the cloth zone, and 1 hole is separated by the interval, and the third fork is worn; the two hooks are separated by 4.-6 holes, generally 7-8 miracles per meter.

3. South Korean wear method

You can also wear two more than one, and you can also wear two more, so the effect is more prominent, but the more the amount of the cloth is used. After the hook is put on to the bottom of the cloth Belt, the hook is tied.Fold the folds so that it is facing the front. In actual use, you can adjust the number of inserted places inserted into the slot.

4. Big pleated wear method

It is recommended to wear 1, 3, 8, and 9, that is, the four -to -teeth hooks are inserted into the serial number 1389 hole on the cloth Belt, and 4 holes are separated by the middle of the middle.-8 holes.The folds of the curtains look a bit like a butterfly shape.

two,How to hang the curtain hook

1. First of all, find the position above the curtains, and observe it carefully. You can see the gap. It is a double -layer and there are special hooks.

2. Hang the hook in and pay attention to the position of the folds.

3. Leave the folds, then hung the hook completely and lift it up.

4. The hooks on the curtain rod are put on, and then the hook is prescribed later.

5. Gather the hooking place in one place to facilitate the hook.

6. Follow the sequence of the hook and hang the hook.

7. After Hanging up, the curtains are hung up.

[Chrome -plated rack] What are the characteristics of chrome -plated racks?

What is the material of chrome -plated racks

1. Chromium is a slightly blue silver -white metal. The metal chromium is easily passivated in the air. The surface forms a thin layer of passivation film, which shows the nature of the precious metal.

2. The chrome-plated shelf has high hardness. Depending on the composition and process conditions of the plating solution, the hardness can change within a large range of 400-1200HV.The chrome layer has a good heat resistance. It is heated below 500 degrees Celsius, and its gloss and hardness have no significant changes. The temperature is greater than 500 degrees Celsius.

3. The friction system of chrome layer, especially the dry friction coefficient, is the lowest among all metals, so the chrome layer has good wear resistance.

4. Chrome -plated layer has good chemical stability and does not have effects in alkali, sulfides, nitric acid and most organic acids, but can honor hydrochloride (such as hydrochloric acid) and hot sulfuric acid.

5. Within visible light range, the reflection capacity of chromium is about 65%, between silver (88%) and nickel (55%), and because chromium does not change color, it can maintain its reflection capacity for a long time and better than better than long -term better and better than better than the use of color.Silver and nickel.

What are the characteristics of chrome -plated racks

1. Chrome -plated racks are harder, stronger, and have good support than stainless steel. Even if they are divided into many layers, many things are placed, and there are generally no problems.It can be used as a dining car. It is very convenient to transport plates and dishes. This shelf is widely used in restaurants, hotels and other places.

2. The surface of chrome -plated racks is chromium. The chromium color is bright, wear -resistant and durable. Even if it is used for a long time, it will still be easy to clean like a new one.The coldness of the soft metal is more beautiful in home.

Application of chrome -plated racks

1. Chrome -plated Kitchen rack

The upper layer of the chrome -plated rack is interval, which can be inserted obliquely into it. The following is used to put the bowl stable and safe. There are also designs of placing cups, chopsticks, and spoons on the left and right sides.It will be very convenient to use tableware.

2. Chrome -plated bathroom shelf

Chrome -plated racks are often used in bathrooms. They are generally fixed on the wall. A slightly taller place is often installed with a shelf.A place where you reach out to place a shelf, consisting of the bottom plate and the pillar, used to put bathing supplies.

Through the above content, it is not difficult to see that chrome -plated racks have a lot of advantages. Whether in the appearance and functional purposes, they have excellent performance. It is a very good shelf type.Chrome -plated racks are widely used in home space, and they are purchased according to everyone's needs.

1. Which of the aluminum alloy and steel pipe of the Outdoor trolley is strong

Small Outdoor carts are a practical, convenient and multifunctional Tool, which provides great convenience for your Camping life.If you want to enjoy a comfortable and pleasant Camping life, then you must choose a high -quality Outdoor cart!So the question comes. Which of the aluminum alloy and steel pipes of the Outdoor trolley is strong?

The sturdy of the steel pipe of the Outdoor trolley is strong.

1. Steel is a collective name for the iron carbon alloy from 0.02%and 2.11%of the percentage of carbon content.The chemical composition of steel can change greatly, which contains a small amount of elements such as manganese, phosphorus, silicon, sulfur and other elements, and carbon -containing steels with less than 1.7%of the carbon steel.

2. Aluminum alloy is alloy with aluminum as a base, which is one of the light metal materials.The product characteristics add a certain amount of alloys with aluminum as the base, which is one of the light metal materials.

Second, which is the best Outdoor trailer aluminum alloy and steel pipe

Steel pipes and aluminum alloys have their own advantages. Which material choose depends on personal needs and scenes.

1. strength:The steel pipe has a strong structure and higher strength. It is suitable for heavy Outdoor trains, and aluminum alloy is more suitable for making light Outdoor trains.

2. maintenance cost:Aluminum alloy Outdoor trolleys need less maintenance because aluminum is not easy to rust or suffers from other damage.

3. Performance:The aluminum alloy body is lighter and has better acceleration performance and lower fuel consumption.

4. price:Under the same size and intensity, aluminum alloy body is usually more expensive than the steel pipe body.

Therefore, according to your needs and budgets, you can choose appropriate materials to choose Outdoor carts.

1. The correct way to wear pants

Whether it is a mountain climbing, a self -service travel or a Camping leisure, it is best to choose a three -layer three -layer gel pants with more abrasion -resistant fabrics to suitable for a variety of harsh environments.In addition to choosing the right charge pants, the correct method of dressing is also important.The pants Belt of its Assault pants is an important step to wear correctly. The specifics are as follows:

1. Fold the Belt between the waist into the length of the pace and place it in front of the waist.

2. Fold the left Belt inward inward, and place the corner of the waist band below.

3. Fold the right Belt on the right side and bypasses the folding Belt on the left side, and as for the below of the folding Belt.

4. Fold the right Belt around the winding and fix it with your hands.

5. Put on the folding right Belt through the vertical knot formed by the left Belt just now, and fold it into a suitable shape.

2. What to wear in the Assault pants to keep warm

The general selected fabrics of submachine pants are windproof and waterproof, with functionality.In winter, the submachine pants are generally designed with composite or lining.Under pants are generally used in Outdoor mountain climbing, Hiking and other scenarios, it is very important to keep warm in the cold environment.

You can wear warm pants in the Assault pants. We can choose cotton pants or hairy pants with double layers of fleece. We can also choose wool -knitted pants, which can be very warm.

3. What is the constituent of the Assault pants

The tailoring design of the Assault pants must conform to the characteristics of the ergonomic engineering. The submachine pants generally have a three -dimensional design and thickening treatment for the knees and hips. The main parts are mainly:

1. Belt and Assault pants are generally equipped with a disassembly strap. This greatly improves the applicability of the Assault pants, and is convenient for disassembly, so that some big or small people can better adjust to the appropriate length.

2. The waist guard, the back of the back is tight, the waist guard design will not be exposed when the waist is bent, and the loose design of the back waist can make it more stretched during the dressing activity. After removing the strap, there is also a Belt ring.The design of the design can not be dangerous without using the strap.

3. Gao Li's crotch design, waterproof zipper, thickened hips, wide crotch design, high -ritual design Assault pants, wide crotch design, and the crotch is widened.With large constraints, the hips are generally made of semi -circular type, and thick wear -resistant materials are used to increase its strength.

What's wrong with knee pain

1. Knee joint pain caused by strain and bad posture

People with knee pain can use some physical therapy such as heat therapy, spa, ultrasonic, acupuncture to relieve pain on the knee and reduce the pain during acute attacks.It can also be used to relieve pain with the main effect of promoting blood circulation and removing blood stasis.

2. Knee pain caused by exercise damage

If the knee pain caused by improper exercise, exercise should be stopped to avoid aggravating damage.Within 24 hours after injury, a cold compress is performed in the pain, and the cold compress time is maintained for 30 minutes.Avoid hot compresses, massage, massage or medication.After 24 hours, it cooperates with analgesic and anti -inflammatory for external painkillers to help him forest latex.

3. knee pain caused by osteoarthritis

The pain and rigidity of the knee joint can be used to slowly and effectively slowly and effectively.Conventional physical therapy methods include ultra -short waves, microwaves, ions transparent, red light, and talid neuromatoplectrical stimulation.

4. Knee joint pain caused by rheumatoid arthritis

Caused by rheumatoid arthritisKnee painIt can slow the pain with hot ironing and hot compresses, massage and massage.At the same time, in addition to traditional Chinese medicine and western medicine, patients with rheumatoid arthritis can also be supplemented by diet therapy to accelerate the rehabilitation process.

What should I do if I do knee pain

First, pay attention to keep warm

In fact, there are many causes of knee pain, but among middle -aged and elderly groups, the most important cause of knee pain is actually rheumatic diseases, so it should be kept warm in daily life.Because when the weather becomes cold, the pain in the knee will increase significantly. In winter, you can wear a thicker part of the knee joint, or stick it with a warm baby to ensure continuous fever.

Second, exercise appropriately

When we were before, some biologists put forward the principle of using waste and retreat. In fact, although it is not a special scientific theory, it also has a certain reason.In our human body, if some parts are often exercised, it will become more developed.For example, if our knees do not exercise for a long time, then suddenly exercise will feel more painful.Proper exercise can make our knees more flexible, and it will be good for the knee joint.

Third, Chinese medicine wet compresses

In the severe period of our knee pain, the help of drugs may be needed. If we do not want oral drugs to harm our health, then we can use the method of moisture in Chinese medicine.Choose some traditional Chinese medicine with the function of eliminating wind and cold and blood circulation and then apply to the part of our knee joint, which can significantly reduce the pain of our legs, and long -term adherence to the bones of the bones.

Fourth, physiotherapy massage

In fact, when many people have knee pain, the first reaction is not to go to the Hospital for treatment, but they will choose to try some methods to relieve pain.Physiotherapy and massage will be the first method of everyone's choice. By physical therapy, it can stimulate the growth of our knee joints, and massage can relieve pain. However, there are some incorrect physical therapy and massage methods, which may even make the condition worsen.Therefore, even if we all choose the method of massage, we must find a formal professional masseur to press it in the correct acupuncture points.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;