Sys_Perla's Articles

1. Is it safe to play the Paddle board?

One person, one board, one paddle, swimming on the water, and feeling the vastness of nature. This is the picture desired by many Paddle board enthusiasts and learners. However, as a water sports, many friends are worried about the safety of Paddle boards.Is it dangerous to play Paddle boards?

Generally speaking, in the appropriate area, wear protective supplies such as life jackets, foot ropes, and play Paddle boards will not be dangerous, especially if there are paddle coaches to lead the team, the safety is very high.Don't worry about swimming.

However, if you draw Paddle boards in the channel, do not wear life jackets, play Paddle boards, play Paddle boards in dangerous waters, etc., there will still be a certain danger. Therefore, you must pay attention to safety.

2. What should I pay attention to when playing the Paddle board safely

1. Play Paddle boards must wear life jackets, tie feet ropes, and swimming is the best.

2. During the row, you must accompany you to accompany you. This can ensure that after the water falls, when you cannot climb the board, some teammates will help, or help call for help when dangerous.

3. Do not play Paddle boards when encountering severe weather, such as lightning weather, high winds above the third level, heavy rain, etc., it is not advisable to play Paddle boards.Especially during wind, it is difficult to resist the wind standing on the board; in addition, once the wind may blow people and the board to an unsafe area, and even collide with the Ship, it is very dangerous.

4. Chice the Paddle board should try to choose calm water. For example, in the lake, because the lake water is low, especially for novices, once a safety problem is encountered in the lake, it will better solve it than the Yangtze River, Hanjiang and other places.

5. For experienced enthusiasts, it is not impossible to challenge the Yangtze River and Hanjiang River, but it must not be traded in the channel and cannot affect the Ship's sailing.

Third, the Paddle board is the extreme exercise?

Not.

Extreme exercise refers to sports with high difficulty and large challenges, such as: Steaming, skateboarding, long boards, extreme bicycles, climbing, snowboards, air surfing, street disease drop, trillking, extreme off -road, extreme water skiing, water skiing, water skiing, water skiing, water skating, water skiing, water skiing, water skating, water skiing, water skiing, water skiing, water skiing, water skiing, water skiing, water skiing, water skating, water skiing, water skiing, water skiing, water skiing, water skiing, water skiing, water skiing, extreme skating,Extreme roller skating, drift boards, etc.; The opening of the Paddle board is less difficult and does not belong to the category of extreme exercise.

The role of indoor rockery Fountain

(1) Misty treatment: It is easy to add aromatherapy essential oil or traditional Chinese pharmaceutical agents in water, such as (vinegar, flower dew water and other traditional Chinese medicine agents), which can be the effect of atomizing therapy in the guidance of a doctor.

(2) Purifying air: The indoor rockery Fountain can continue to produce a large amount of negative oxygen ions to effectively remove odor second -hand smoke, formaldehyde, bacteria and harmful dust.And adsorb the electromagnetic radiation released by carbon dioxide and home appliances to further eliminate the floating positive ions in the air.

(3) Interior decoration: The combination of rockery and potted plants, decorative crafts, and lamps can change the layout of the indoor landscape, make the indoor full of anger, and have a wonderful feeling of entering the wonderland.

(4) Covering noise: The natural flowing sound of the indoor rockery Fountain can cover the surrounding noise and bring a sense of peace and leisure.

(5) Fortune Feng Shui: The flowing flowing water can increase the dynamic and aura of work, living space, and bring a steady stream of wealth.The natural flowing landscape has the feeling of returning to nature, and it has a beautiful meaning that makes people have a good family.

Indoor rockery Fountain production

(1) building a pool: The sprinkler is generally greater than the height of the shot, that is, a 45 angle to prevent water splash.The pool must be a secondary waterproof to prevent leakage.

(2) Construction of rockery: The construction of indoor rockery Fountains does not have to pursue the shape of the rocks too much. It is too particular about thinness, leakage, and transparent. In this way, the choice of stones is more difficult, and it is more natural to decorate some green plants or pavilions.

(3) Install the Fountain: The natural posture of the indoor rockery to maintain the flowing water is mainly completed by a small pump.Generally, families use a 0.55 water pump, three nozzles (determined by space), and three tables.The Running process of the pump is: Start, run, stop, start.

(4) Indoor rockery light: The color installation color of the rockery light is generally combined with three colors of red, green, and blue. If the rockery Fountain is not large, you can just install a colorful lamp with a cold mist effect.

The importance of the position of the flowing water Feng Shui wheel

(1) Feng Shui Wheel is water in terms of attributes, and the stove of the kitchen in the home is fire, so the Feng Shui wheel cannot form a straight line with the kitchen stove.Otherwise, there will be a taboo for the opportunity to meet the water and fire.If the Feng Shui wheels in the home are rushing relative to the stove, the health of the family will be damaged.There is also the place where the Shentai in the home is also heavy, so when the Feng Shui wheel is placed, try to avoid becoming a straight line with Shentai.

(2) Do not place the Feng Shui wheel in your home under the God of Wealth.There is a saying that the "wealth returns to wealth", the wealth of the family is placed on the wealth god like Fulushou Samsung, so that this can be icing on the cake.If the god of wealth is placed on the Feng Shui wheel and believes that it can increase wealth, this is really a big mistake, because the Feng Shui wheel was originally placed in the fierce position of the house.The principles of "wealth return to wealth" are contradictory, and the god of wealth is placed on the Feng Shui wheel, and it is also a "positive god to enter the water" in Feng Shui.

(3) The Feng Shui wheel in the home can be appropriately placed in the bias in the home. This will not only achieve dispeling evil spirits, but also because the flow direction of the Feng Shui wheel is towards the house, so it can gather money.Remember that when placing, the position of the Feng Shui wheel cannot be placed out of the house. This is to prevent the Feng Shui wheel from gathered wealth, and there is the consequence of the loss of property.

Feng Shui wheels are generally desktop. Large -scale on -ceiling type. Many Feng Shui wheels are equipped with Feng Shui balls. The water storage of the chassis with a water pump is pumped up. After the water pipe to the top, the impact of the water flow can drive the upper Feng Shui ball.The long -term rotation of Feng Shui balls is a good symbol of "wealth."In addition to the position of Wangcaixing (Ming Finance and Like Finance), Feng Shui Wheel can also be placed on the Wenchang position, which can make children read smart.In the position of Wang Dingxing, people are prosperous.

What are the equipment for the Fountain

It mainly includes pipeline system, underwater power system, water pumping head system, power distribution, underwater lighting system, control system, audio system, laser, water curtain movie system, etc.

1. Is the Sunscreen mask a IQ tax?

In the arrival of summer, the sun began to bake people. Sun protection has become an indispensable job for people. It does not hurt people's sunscreen, sunscreen, and sunshade.Some people say that the Sunscreen mask is an IQ tax, so is the Sunscreen mask the IQ tax?

Sunscreen masks are not IQ taxes.Because Sunscreen masks are a product with certain scientific interpretation and functions.Because ultraviolet rays are important factors that cause Skin sunburn, Skin cancer, and other health problems, using sunscreen products can reduce damage to the Skin.At the same time, masks can also effectively prevent the spread of viruses and other microorganisms and protect our health.Therefore, if it is a reliable Sunscreen mask, it is not an IQ tax.

2. What is the principle of Sunscreen mask

The principle of long Sunscreen mask: The outer layer uses special ultraviolet fabrics, which improves the ability of the fabric's own UV reflection and absorption, which can reflect and absorb high -energy ultraviolet rays.It becomes an electromagnetic wave with low energy or short wavelengths, thereby reducing the strength of the sun and eliminating the harm of ultraviolet rays to the human body.

Light aging caused by ultraviolet rays is the main cause of Skin aging.Doing Sun protection in the strong summer of ultraviolet rays is an important means to keep the Skin healthy.Ultraviolet rays of sunscreen are UVA and UVB.UVA has a strong penetration and can penetrate deeper dermis, stimulating increased melanin, resulting in dark Skin, and color spots and wrinkles -anti -UVA is sunscreen black.High UVB energy can cause Skin redness and sunburn, and problems such as erythema, blisters, pain and other problems -anti -UVB is sunscreen.

1. Wired or wireless on the riding code watch

Wired code table

The wired code watch is mainly used to transmit the sensor signal through the data cable. It is the most commonly used code watch type.

Advantages: The performance is relatively stable, the speed of the speed is more accurate, and it is not easy to be disturbed. As long as a small battery can work, the electricity consumption is very low, and the price is usually cheaper.With luminous effect.

Disadvantages: The installation of a wired code watch is relatively troublesome, and it affects the beauty of the overall car.

Wireless

The wireless code table is actually an external sensor and magnetic head, but it does not need to use the data cable to transmit the model and directly receive the wireless reception.

Advantages: The installation of the wireless code table is relatively simple and convenient, and it does not affect the overall beauty of the car. The sensitivity of the sensor is stronger, and the functional design is more diverse and intelligent.

Disadvantages: Although the high -quality wireless code watch is accurate, the price is relatively high. The general price of the wireless code watch with a general price of less than 100 yuan is inaccurate and the performance is unstable. It will often be disturbed during use.

Through the introduction of the advantages and disadvantages of the bicycle wired code watch and wireless code watch above, you can buy according to your favorite and purchasing focus.

Second, the main point of buying the bicycle gauge

What parts need for cycling code

1. Together: It looks like an electronic timer, with LCD display, keys, metal contacts, etc., is the most important part of the code watch

2. table seats, connecting and sensors: The table seats are usually placed in the car's handle or stand to the head to fix the header.There is a connection on the wired table seat, connecting the seat seat with the sensor installed on the front fork.The wireless code watch has no connection, and the sensor transmits data to the header by transmitting wireless signals.

3. Sensing magnet: The spokes installed on the front wheel, the position is maintained with the sensor installed on the front fork.Essence

4. Poor frequency (non -standard accessory): The mid -to -high -end watch has the function of calculating the frequency, that is, the frequency of the driver's pedal.Common stepping device includes connecting, sensors, and induction magnets. The connection is used to connect to the sensor that connects the table and the triangle installed in the back triangle of the frame (the rear triangle here isPipe), induction magnets are often installed at the crank, the position corresponds to the sensor, and the working principle is the same.

5. Synthetic lighting (non -standard accessories): Installed on the table to illuminate the watch at night.

What are the quality of the Bicycle code table?

1. Accuracy of calculation: Ride information as much as possible.

2. Qualification of workmanship: It will not produce poor contact contact, easy connection to break, and no display on the head.

3. A certain degree of Earthquake resistance: Don't make a strike at a bumps.Of course, the bumps with too strong strength will also overwhelmed many code watches that usually perform well.If you are often engaged in high -intensity off -road, it is recommended to choose a code watch designed for this, and this code table will be mentioned later.

4. A certain degree of waterproof: riding outside, it is inevitable to encounter the situation of rain ride.If the precision electronic products encounter internal water, it will cause the product to fail, and the product will be scrapped.For example, waterproof fabrics have a certain waterproof index, and the code watch should also have a certain waterproof function.However, in the case of heavy rain, no matter how good the code watch you use, it is recommended to take it down and put it in a waterproof bag.

How to buy the Bicycle code watch

1. Select the required display parameters

A Bicycle code watch should at least be able to accurately display three sets of parameters: speed, mileage and time.Single -block surfaces can be obtained through GPS and presented on the screen, and the wireless code table with Bluetooth connection can be installed, which can be more accurate through peripheral peripheral peripheral peripheral peripheral peripheral peripheral peripheral peripheral peripheral peripherals to measureValue.Select the functions required according to your own needs.

2. Choose the right brand price

The price of a bicycle gauge ranges from tens of yuan to thousands of yuan. The huge price difference makes many novices who have just entered the pit.Don't be too tangled with brand and complicated functions, the cost -effectiveness is the first place.If it is a road idiot, it is recommended to buy a code watch with navigation and map functions.

3. Choose your favorite operation method

bicycle code tables generally have two types: touch screen and keys. You can choose according to your own operating habits. Before buying, you can see if it is a full touch screen, double -key, three -key or four keys?The fewer keys, the simpler, but the response speed and the screen touch are not comparable to smartphones. On the contrary, although the button is effective, it is often too hard to press.The head drops it from the shelf.And once the codes go out at a high speed, I am afraid it will be worth it.

Miscellaneous wood bonsai type

Miscellaneous wood is all -encompassing, and it can be divided into five categories according to the ornamental nature.

1 , Observation: Strange shape, good -looking elegant and elegant pairs of sections of aslene (Hubei Jingshan Specialty), Jiulixiang, Rongshu, Chinan

2 , Observation: The leaf color is beautiful.

3 Watching flowers: flowers are overflowing, flowers and trees are peculiar, the most common and most favorite bonsai types such as plum blossoms, Ziwei, azalea, camellia, June snow, safflower beef, gardenia, and gardenia.

4 fruit: There are flowers and fruits, the fruit is good -looking or even diet.

5 , Guanjo: Graceline, entangled like gold and silver flowers, ivy, wisteria.

Making of mixed wood attached stone bonsai

1. Selection of stones

In fact, there is no special requirement for the choice of stone.If you don't have any materials on hand, you can just make a cobblestone and pave the road.It is recommended to jade rough, that is, the waste of the gambling stone; you can choose the traditional strange stone; commonly used British stones, stalactites, sandstones, turtle stones, yellow wax stones, pine stones, pine stones, Shoushan stone, etc.Stones can be legally processed by cutting, carving and cement adhesion.

Second, the choice of tree species

There is nothing to use in the tree species of miscellaneous wood bonsai, there are not many requirements.

Three or three styles

1. Tree roots holding stone: Take the old pile with a long root system and a beautiful posture. According to the characteristics and creative intentions of the selected stone, follow the texture of the stone in the stone gap, and then wrap it with a fine iron wire, fill in the stone cracks, fill in the stone seamEnter the mud, and the stone is planted together to maintain it in the deep basin.In the future, according to the growth situation, the mud is gradually cut off, the wire is removed, the iron wire is removed, the roots are revealed, and the fine roots that affect the aesthetics are trimmed, and then the excess soil is removed with water to plant it in a shallow basin.Of course, the seams on the stone can not be natural, allowing fraud to cheat.

2. The trunk embedded stones: open the surface of the stone according to the shape of the trunk, and then stuff the trunk in. After a period of time, the trunk is perfectly filled with the stone groove, and then slowly rolled on the surface. It is also very good.EssenceThe most ideal state is to make tree stones.

3. Stone planting bonsai: The stone planting bonsai should be said to be the ultimate of the stone bonsai. There is no Flower pot or soil.It is said that its production method has been lost, but it is not difficult to think about it. It is worthwhile to wear a text. When I do it next time, I will pass the process.

The stone with the stone bonsai is one side, and it is the other side of the stone. The stone is shaped according to the normal bonsai, but the shape of the stone must be considered to make the overall coordination and perfectly blend.

The biggest taboo of the attached stone bonsai is the detachment of the tree and stone. Whether it is root or a trunk, the place to be attached should be tight and cannot be suspended.

How to maintain the mixed wood bonsai

1. Daily maintenance

In simple terms, it is nothing more than frozen, winding, watering, fertilizing, insect -proof, combing branches, and adjusting light.

1. The anti -freezing problem is not prominent in the south. Most of the tree species are outdoors outdoors.It should be noted that many people like to move the bonsai back to the room to watch in winter. During the reactoring, the sun is not in the sun. For most of the plants that like the sun, the tree gas will be damaged.It is reminded that when the spring flowers are swollen outdoors, especially be careful not to move it.Adaptive exercise should be performed step by step. First, ventilate in the room first, then choose the temperature suitable for sunny days, exercise in a short time, and then move back to the room at night.In addition, the room temperature is too high and harmful. If the plant cannot be dormant or wakes up early, it also affects the tree gas.

In summer, pay attention not to store in the air -conditioned room for a long time, otherwise it is easy to cause the tree to weaken, because it is a life body.In the middle and lower reaches of the Yangtze River, it is often found that the trimmed branches have no teeth without teeth within 3-5 cm, and the covering damage is available.

2. The problem of avoidance of wind is simple, that is, when it is stored outdoors, try to store it at the sun -shelter as much as possible.Pay special attention to the changing pots in early spring. The wind is easy to cause water, and the water spraying measures for plants can be taken to slow down. However, it should be noted that the water is only sprayed on the plant, and the soil should not be too wet.

3. Watering problems, water is required during the life cycle of the plant.It is best to soak; when the Outdoor wintering cold current comes, water should be poured in advance, which is of great benefit to improving the cold ability of the plant.

4. Fertilize the problem of fertilization, grasp the principle of "thin Fertilizer, eat less meals", and those who are weak in tree qi must not be "fierce medicine". The key is to pay attention to the dilution rate of Fertilizer.It is best to use fermented organic Fertilizers to effectively reduce the potting of the pot soil.Many people have poor maintenance, Gain is too "hard work", and fertilization is too frequent.

5. Preventing diseases and insect pests, occupy an important position in maintenance.Pay special attention to oily secretions and other plants such as elm tree and other plants, which affects the photosynthetic effects and find that late consequences are unimaginable.Add the leaves when killing the leaf surface in daily pesticides, and the effect is very good.The key to medication is to prevent early. After the spring, you can spray pest.The weaker the growing plant, the weak the resistance.Fortunately, there are often less insect pests. Even if there are insect pests, they are often worms who eat leaves, which are controllable.Only the pests of the pests of the tree juice are even more terrible. If you find how much it is not timely, you need to pay more attention.

6, combing branches, the denseness of the branches affects the ventilation and light, and it is easy to die with weak branches.Plants are either leafy or healthy. The top of the crown should be taken appropriately to increase light to benefit growth.

Second, turn the pot and change the soilPlants shrinking branches is mostly caused by malnutrition. Changing the soil is an important way to improve the growth conditions of plant growth.It is also difficult to work to change the pot to work, but it is necessary.There are not many middle skills, the key is the trimming of the roots and the use of soil.There are still something else in the bonsai and cultivation in the cultivation.Miscellaneous water control is not feasible, and the Fertilizer is controlled.Some people in the formation bonsai are practicing less soil, and the custody of the pot is slowed down.I think that the soil still needs to be replaced, but the root beard can be trimmed appropriately. The life of the plant will not affect it. Of course, you cannot "just care about the whole camel, regardless of the camel's alive."In practice, fine soil can be used for molding bonsai. It should be used to use coarse granules for raising bonsai, which is more beneficial to the growth of the root system.The soil of the pot must be dry. It is best to go through the sun, otherwise the soil transmission is worse after changing the pot.Flower pots should also be washed and disinfected (dried) to reduce eggs.The trimming of the tree roots is an important part of the pot.

Third, styling

The shape of the shape is the place of bonsai art, which has always been valued.The key is to control the pruning frequency.Usually miscellaneous wood bonsai is trimmed at least twice a year.It can be cut in early summer and germinated like spring; the second time in the early autumn, it will germinate again, and the leaves born will generally not fall in winter.