How to plant potted grapes?

1 , Choose the right container

Potted grapes are best to choose a large and sturdy container (too light plastic pots will not be kept well, and pottery pots are the most suitable), which can allow grapes to grow freely to grow. At least35 ~ 45 Cm deep, diameter 50 ~ 60 Cm width is the most suitable, generally 50 ~ 70 The container that is raised is the most suitable.

Of course, the seedlings that were raised at the beginning still chose small and medium -sized Flower pots. It took more than half a year to slowly move into the large pot.

2 , Choose a variety

It is best to go to a large Gardening flower market to buy. Of course, you need to adapt to your climate and choose the most suitable Flower pot according to the variety.

Some varieties have good disease resistance, some are cold tolerance, and some are very low.

3 The timing of planting

The best time to grow grapes is spring and early summer. It is so early to make the grapes strong and better cope with the frosty season.

But if you live in tropical and subtropical areas where frost -free periods, the best time to grow grapes is in late autumn and winter.

4 The position of the placement

It is best to keep in a sunny, warm and dry place. If it is too hot in summer, this should be properly shaded in the afternoon, but you need it every day6 Light above an hour.

Avoid being wet, dark and windy places, if the ventilation is not good, it is impossible to raise potted grapes, which will easily breed fungal diseases.

5 The shape of grapes

Potted grapes also need to make a scaffold or some brackets for it. You can make one with wood or buy one directly.Grape plants have a long chairman, and it needs support.

In addition, you have to shape it so that its Teng Man grows to the shape you want.

What kind of shape to develop is determined when you choose what type of bracket you choose.

6 Soil selection

Do not choose too much sticky garden soil (vegetable garden soil), because it is potted grapes, so be sure to choose loose, organic and drainage humus soil.The compost soil is a good choice.

7 , Proper watering

It is very necessary when watering regularly. Potted grapes hate the humid environment very much, so avoid excessive watering, but keep the pot soil slightly moist (soil can be pinched into a group, but the water cannot be squeezed, but it is slightly moisturized)

Wetness is easy to rotten roots and rotten stems, and it is easy to breed pathogenic bacteria.

8 , Fertilize

It is best to choose rotten manure or compost of Fertilizer. Other Fertilizers should be used as little as possible. In the first year of planting, you can apply Fertilizer in spring and summer, and ordinary Compound fertilizer can be used.In the second year, after the bud in spring, high -phosphorus and Potassium fertilizer with low nitrogen content must be used.

9 How to plant grapes in tropical and subtropical

How to make potted grapes results?

1. Powder

flowers should all knowMost of the potted grape varieties can be pollinated by fancy, but in order to increase the success rate of fruit Hanging, you can gently shake the grape flowers to make the pollen blended with pollination.

2 , Ground Flux

The ground film is covered on the root stem of the grapes, or some pine bark, compost earth or pebbles are covered in the Flower pot.This can keep the water profit.

3 , Overwinter maintenance

In the cold winter seasons, you must protect potted grapes.This belongs to the dormant period of grapes, because it is potted, so move it to a warm place indoors.

On this basis, reduce watering and avoid any Fertilizer during this period.

4 The relationship between pruning and results

In the first few months after the grown season (winter), it could not be trimmed during the period, allowing it to grow freely and making the plants more lush in the Flower pot, so that it will grow a stronger root system.

If your potted grapes have been raised for two years, and it is not fruitful, then you must cut off all old branches, and you must not be afraid to grow.

5 , Pruning time

The trimming time is the best at the end of winter to early spring. This is a time period for grape growth. Pruning is beneficial to better explosion.

After trimming, each small bud will become a new branch, so it is very necessary to cut it back in a year or two.

Pruning is also to make the shape of the plant, because the potted container space is limited, so the trimming in the first winter should only be left as much as possible1 ~ 2 A branch, the others are removed.

When the leaves of the grapes fall into light at the end of winter, it is very necessary when trimming. If you trim it, you will only grow worse and worse, let alone the result.

Attention of pests and pests

In terms of disease pest pests, dark spots and powder disease, especially when they are dry or hot.

In terms of pests, pay attention to aphids, moth -like leaf -eating larvae, see killing.If a small amount of aphid is found, you can use cotton swab to stick to alcohol.

Potted grape harvest time

General potted grapes long2 ~ 3 It can be harvested in the year. As mentioned above, choosing a variety is the first key, and the trimming of winter and spring is the second key.

The maturity of grapes depends not only on the climate, but also how you raise it, and identify whether the grape mature flower buddies must have experience!

Just look at the color, the grape municipal party committee becomes translucent, the epidermis slowly becomes a little yellow, then it is mature, the touch is soft, and the taste is the sweet.

How to overwin the potted grapes

1 , Potted grape winter, dont cut off the leaves, cutting off the leaves will waste nutrition ,, Let it fall off naturally.After the leaves 10 It is advisable to start trimming around the sky.

2 , Potted grapes naturally enter the dormant period after falling leaves.During the dormant period, there are long and short climate in various places.According to the physiological characteristics of grapes, it only takes a month to sleep.However, in the cold region in the north, it is generally too late because the climate is forced to enter the sleep prematurely.Therefore, the northern region has a longer dormant dormant in winter.

3 The temperature of the potted grapes in winter should be kept O ~ 5 Left and right, the maximum should not exceed 4 ~ 6 , The lowest cannot be lower than 3 ~ 4 EssenceThe temperature is too low -rooted and died due to frozen, and the temperature of the temperature too high will continue to grow.

4 In the long winter, the pots of potted plants are performed every half month for inspection. If the pot soil is found, it needs to be hydrated.But pay attention to prevent premature germination.

5 To prevent mice and pests, protect potted grapes.

6 Hang a temperature gauge on the potted grape rack to observe the temperature.And according to changes in temperature, to increase the potted grapes and the place where the cold coverage and the movement place of the movement, and take corresponding management measures.

7 In addition, watering in winter should be poured after several hours of storage of well water or tap water, so that the water prevention temperature is too low, and there is a root injury system.

What are the breeding tools for family balconies?

1. Tieshai

Used for moving vegetable seedlings and shovel.There is no need to be iron, and plastic is also available, but try to prepare one as much as possible, otherwise, do you have to use your hands when shovel?

2. scissors

The scissors mentioned here are preferably horticultural cuts, which can cut pruning, scissors, and thick stems.Can be used for seedlings and harvest fruits.

3. kettle

A kettle specially poured with a kettle shower, try to choose the kettle according to the size of the plant planting plants, then the large pot is large, and the planting area is small.

4, hemp rope

There is a little bit of the house to bind and guide the growth of the stems.

5.

If you plant some rattan plants at home, you need this support pole to support it.

6. Potting bottom net

The closed and poor ventilation balcony must be prepared.Putting the net at the bottom of the container can prevent the soil flow from flowing out and the invasion of the pests.

7, small can

Generally made of plastic, just a little bit.If not, you can use a paper cup instead.

8. grid frame

Although this looks a bit weird, it is very practical!It is a tunnel bracket on the vegetable basin to support gauze.Cover the gauze on it and fix it with a clothes clip.The gauze can be removed at any time, which is very convenient.This Tool can prevent insects, birds, and excessive light. It is best to choose white transparent.

9, table, bamboo board

You can put the vegetable basin in a higher place to make it more fully accepting the sun, and it will also make the balcony more three -dimensional.In order to prevent moisture, it can also cover the excessive sunshine in summer.If the quality of life is not so high, you can use a small bench instead.

10. Sowing spoon

Sowing a spoon has become simpler to sow the difficulty.He can simply plant small spoons with small seeds, with small concave pits of 1.2 mm, 2 mm, 4 mm, and 1.5 mm (ellipse), which can be placed on a grain of seeds for sowing.Size: 1 cm wide (spoon), 16.5 cm long.

11. Plastic mesh cover

Plastic mesh covers are generally given to Flower pots or protective plants to prevent diseases and insect disasters of some plants.

How to make sunscreen spray

Materials: 120g of clear water, 18g of food emulsifier, 15g of cold -rolled sesame oil, 10 drops of plant glycerin, 5g of lotus oil, vitamin E10 drops, titanium oxide and zinc oxide 15g, Xueya fat 15g, avocado oil 15g, food preservatives 20 food preservatives 20Drop, pomegranate seed oil 10.

Production method: First melt the prepared Xueya fat, and then add cold -rolled sesame oil, avocado oil, butto oil to the inside, and then put the emulsion in the melted oil tank and stir it.Fortunately to melt.Then mix the mixed powder of titanium oxide and zinc oxide in the oil and stir it all the time. Wait until the powder forms an egg yolk sauce -like paste to stop stirring, and then pour food preservatives, pomegranate seed oil into the paste,Vitamin E and plant glycerin, then continue to stir, wait until the paste drops to normal temperature.

How to DIY homemade sunscreen

MakeMethod 1:

ingredients: 120ml of coconut oil, 5ml of lotus oil, zinc oxide 10ml

Production method: Intide with the method of heating with water (if the weather is melted than hot coconut oil, it does not need to be heated again) and Heheba oil, and stir well.Pour in zinc oxide and stir up.Put it in the refrigerator for 30 minutes to 1 hour until it becomes solid.Stir with a mixer for 3-5 minutes until the solid becomes a creamy cream.

Note: Since there is no preservatives, or the technology is very rough, after all, it is self -made, so the shelf life is very short. Generally, it is only a few hours. After that, bacteria will be breeded and will lose effect. Therefore, it is not recommended to do too much.Because it will lose effect after a few hours, and homemade sunscreen is not waterproof, it should be re -applied after swimming.

Production method 2:

Material: 15ml olive oil, 1ml of simple emulsifier, 80ml of hot water, 1 teaspoon of green tea powder, 6g of titanium dioxide powder, cosmetics -grade antibacterial agent 0.2 1ml

Production method: Add green tea powder to the hot water first, dissolve evenly, and then filter the clear green tea juice with filter paper.After the green tea juice is cold, place a clean cream jar with olive oil and simple emulsifier and stir well. Finally, add antibacterial agent and titanium dioxide, and then stir well.

Note: Natural green tea is easier to mold. It is recommended to control it as much as possible within 3 months. If the product is moldy, it should be discarded immediately.

How to DIY homemade sunscreen cap

Materials: cotton, scissors, needle wires, sewing machines, water dispersion pen, ruler.

1 , The length of the hat of the hat is the head circumference, using a circle to plan, this hat is the head circumference 51 For the left and right babies, the hat method is also suitable for adults, but the size needs to be changed according to the head circumference.

2 , The side of the hat, 9.5 It is the width of the side, that is, the height of the hat, how high you want to make the size yourself.

3 The inner circle of the brim should be consistent with the length of the lower end of the cap, and then adjust the width of the brim by yourself. If you want to be larger, you can wider.

4 Cut the outer cloth and library cuts according to the design drawings.

5 , Libu's hat circumference and the top of the hat together.

6 , Switch on the brim and hat of the outer cloth.

7 Switch the brim separately.

8 Fix the lubble on the inside.

9 , Tie around along the brim.

10 , Wrap the edge of the hats.

12 Finally do a bow.

13 ,Finish.

How to make homemade Sunscreen masks

Materials: large cotton handkerchief, plastic hidden buckle, elastic band, needle wire

Production method: Fold the side of the handkerchief inward, and then cut the elastic band into the same length as the handkerchief.Pour the band to the folding of the handkerchief, and then the two banks can be hidden on the banks.

What are the Outdoor clothing fabrics

1. GORE-TEX

GORE-TEX is a fabric that has a high performance in waterproof and breathable, and is often used to make top jackets.It is actually a very thin pose polytetrafluoroethylene film. It is placed on the fabric in a mezzanine to form a high -quality waterproof fabric.

2. DRY-TEC waterproof cloth

The advantage of DRY-TEC waterproof cloth compared to other waterproof fabrics is extremely light and cool.Its bottom layer is a layer of extremely tough film, which is used to resist water pressure. The center is a highly breathable layer and has a large micropore.Its compromise is very small and the weight is even lightweight, so it is often used to make sports waterproof jackets.

3. Micro fiber insulation cotton

Micro -fiber insulation cotton is a new generation of insulation cotton developed using modern microfiber technology. Compared with other waterproof fabrics, it has the advantages of high -strength moisture tolerance. In addition, the warmth of micro fibers is also very good, so it is widely used in waterproof In the production of clothing.

4. GOREDRYLOFT fabric

GOREDRYLOFT fabrics have excellent breathability and windproofness, which are usually used to make down jackets.It has a stronger humidity than the average fabric, but it can resist the strong wind of 32km speed, and it has a certain waterproofness to be used to block snow.

5. Goosedown goose down

It is undeniable that the down is the most superior in various heating materials, because its soft structure maintains temperature.Goosedown is selected from 590 and 650 goose velvet produced in North America, and finished production after strict cleaning, disinfection, and selection. sex.

6. Ultra -thin thermal insulation cotton

The principle of insulation of ultra -thin warming cotton is to use the surface tension of the microfiber surface layer to fully stabilize the air molecules, making it much higher than that of ordinary down or calm heart, mainly used to request a thin and thin field insulation jacket. Essence

7. Climapro

CLIMAPRO is a type of windproof hair. It uses a tightly woven base cloth as a windproof layer, which can resist the strong wind, and at the same time make the cloth body often soft, and the breathability is not damaged.Climapro uses the short -haired structure of the internal and external ministers. The long hair of the inner layer can quickly suck the sweat, and the short hair of the outer layer helps to spread the sweat quickly, so that the sweat can be dry faster, so there is a good one. Fast performance.

8. Climalight

This is a lightweight windproof and insulation material. It is a two -layer structure. The surface layer is a thin and thin 45D nylon silk. It has the function of windproofing and water. At the same time, sweat can be sucked away at the same time, so that the body is often dry, mainly used for lightweight and gloves.

9. Super sweat fiber

Super sweat fiber combines the characteristics of various materials. The area of the surface layer is nearly twice as large as the other fibers of the same diameter, and the pits have both the water effect of the micro -Tube. The shape fiber makes it softer and resistant to it. The overall sweat effect is several times larger than the general artificial fiber, and it can still maintain the advantages of fast dry fibers.

10. Wickronab2

Wickronab2 is a wear -resistant fabric. It is a group of triangular fibers surrounding circular fibers and then spin -to -gauze, which has greatly improved the performance of wear -resistant and refreshing. The finished products are softer and comfortable, and can meet the strict requirements of wild socks.

Performance requirements for Outdoor clothing fabrics

1. Keep warm and breathable

The inner layers used in Outdoor sportswear are mostly velvet. Due to the large heat of outdoor sports and the evaporation of sweat, it is required that clothing heat dissipation and breathability are good.And such fabrics have the advantages of easy drying and good breathability and warmth, so they are often used as warm materials for winter Outdoor sportswear.The design of the outer material should also pay attention to breathability.This function can keep the wearer's dryness and comfort, so that the clothing should be warm and light.

2. waterproof and windproof

Most of the common Outdoor sportswear materials are required to have a certain waterproof performance.At the same time, in order to maintain the dryness of the human body, some clothing adds mesh cloth as a lining in the rain -proof outer material.In this way, the body is separated from the outer layer of the waterproof, away from the moisture.Secondly, the design of the fabric must be windproof.The wild wind is high and the mountains are cold.exercise such as mountain climbing, skiing, or gliding is performed in an environment with high wind speeds.

3. wear resistance

The wear resistance of clothing fabrics must not be ignored, and even has high requirements for antibacterial deodorization and anti -stains. After all, Outdoor washing conditions are limited.In addition, for the outdoor sports of the wild climbing and forests, clothing fabrics must require good tensile stretching and tear resistance.These performance requirements are very harsh from the perspective of textile technology.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. How much is the size of the sky curtain Tent

"Size" is the first part to pay attention to when buying the sky -to -Tent. We recommend that you choose the size of the number of actual users.Because of the sky -to -tents on the outside of the Tent, most of them are used as dining places or leisure halls, and their internal tables and chairs must be placed, and the space it occupies is not small.In order to accommodate all personnel and move more comfortably in it or cool, it is necessary to choose a larger size.For example, if two people use, it is recommended that you choose the four -person account.

If the product is not marked with the number of applications, you can also refer to the following data for the choice:

1. When the two are used, it is 250x200cm

2, 3 or 4 are 300x400cm

3, 350x450cm suitable for 5-6 people

Whenever one person is added, please add 50cm by the short side, and the long side plus about 100cm, so that you can find the size that is most suitable for you.And when the number of users is as many as 7 or more, select a large account of 450x550cm or more.

2. What is the shape of the sky curtain Tent?

According to the shape of the sky, Square, pentagonal, hexagonal, butterfly, alien, and rear accounts.These different shapes of the sky have different functions, and they also have their own advantages and disadvantages:

1. Square

(1) Advantages: shape rules, lightweight, can be used as projection curtain.

(2) Disadvantages: The open space is large, when it rains, the waterproof ability is average, and the mosquito is weak.

2. Hexagon

(1) Advantages: beautiful appearance, unique wings, increase the use area.

(2) Disadvantages: Little free space, inconvenient in and out.

3. Butterfly/octagonal corner

(1) Advantages: affordable price, strong wind resistance.

(2) Disadvantages: Shading and mosquitoes are not good.

4. Alien Tent

(1) Advantages: cool shape and personality.

(2) Disadvantages: The effective projection area is low, which is not conducive to Shading and rain.

5. The rear shape

(1) Advantages: beautiful appearance and effectively expand the space outside the car.

(2) Disadvantages: Place it on the side of the car, behind, and not be used alone.