1. How to tie the lead and hooks with Luya pole

1. Tie hook

The fish line passes through the fish hook and then goes back.The fish hook passed through the circle and tightened both sides.Cut off the scissors.

When the fish line passes through the hook ring, a circle is around, the side of the line head is around 4-5 circles on the main line, and the circle of formation formed. Put back the circle formed by the side of the line.Can.

2. Lead pendant

Luya generally does not use lead pendants. The first one is to increase the distance of the throw. The second is to deal with the fish of the deep water.On the main line, 50 cm away from Luya, and it is usually used on the rolling layer of floating water, so that Luya can always keep it in water with 40-50 cm above the lead pendant.

Second, Luya fishing bass tie lines

1. First of all, prepare the material: a Liaoyan, a tied special Lutah hook 10, the 8-character connection buckle of fishing, a smaller needle, 20-25 grams of lead pendant, a pack of space Beans.

2. First put on the first space Beans online.

3. Put on the 8 -character connection buckle and choose the headline on the side of the small head. Space Beans must be able to stand up to the connection buckle, otherwise it is not equipped.

4. Put on the second space Beans.And tied the line 10 of the Fish hooks on the connector, there are fishing gear shops.

5. Turn on a needle at the bottom of the Laayan line.

6. Hang the lead on a needle.

7. Put it up, the lead pendant is about half of the hook, which is almost the same.

8. Then hook the silk silkworm on the hook (living river shrimp and small loach are also very easy to use).

9. Then turn fishing, throw it out, let the lead fall to the end, and then keep stretching the line. Slowly slipping on your own side, the fish bite hook will have obvious vibration.

10. In the place where there are many stones, it is easy to hook the bottom. If allowed, under the premise of safety, you can catch in the middle of the river. The water in the middle of the water is not very hooked, and the fish is more.

Flower and wood bonsai It is based on the color of the color, the flowers, the colorful, the splendid and gorgeous, and the aroma is refreshing.Its shape should be used in ancient branches, strange species, and sparse branches and leaves.If the material is obtained, the inflorescence is endless, and it is even better to enter the painting.Commonly used materials include spring flowers, plum blossoms, blue peaches, golden bird flowers, plums, begonia, tea, rhododendron, June snow, Lagerstroemia, osmanthus, and tongue gardenia.The flower bonsai has its unique effect in the garden view. Every festival, there are bonsai embellishments with flowers, seductive, aroma, pleasing to the eye, and feel full of spring.

The production process of flower and wood bonsai

1. Choosing pile: To make a pot of exquisite pile landscape, the key is to choose a stump.The most ideal tree stump is full shape, Plants that are green and have not yet dehydrated.

As far as its form is concerned, there are straight -dry, cliff -type, vertical branches, co -planting, , orange tip, free type, etc.Regardless of length, thickness, straightness, old tenderness, bright darkness, denseness, Thick, it should be naturally free and easy.Before leading the stump, the Flower pot is required. The principle is that it can complement each other with the stump.

2. Selecting pots: The shallow mouth pot can display the tall of the forest and wood; the deep -mouth pots can set off the old piles of the cliff; The pine and cypress painted by the ancient people; the graceful and elegant glaze basin can reflect the gorgeous flower fruit stumps.In short, pile landscape The basin is also part of appreciation. No matter the shape, lines, color, and sizes, it should be just right. It has artistic characteristics.

3. Pile scene: The old piles required for the pile landscape can generally be purchased from the flower and wood market.Digging the old piles should be in the rainy season of winter, spring and plums. At this time, the old piles excavated are easy to live.dig When digging, pay attention to protect the roots, bring the root of the beard, and cut off the main roots.Then repair the branches and leaves to make it skeleton"Light installation", there are only few thin branches and leaves (in this step, pay attention to the piles and basin forms to adapt to each other).

4. Standing pile: When the stump stands in the pot, it must be sprayed on the leaves of the branches, and the shade should be appropriately shaded.At this time, If the buds of the tree stump germinated, some positions are improper, and they must be peeled without distress.summer should be seen more sunlight, Pruning and pruning shapes in autumn.The shape of the stump is different due to the different styles of pursuit.There are roughly branches, brown silk tied method, lead silk entanglement method, and so on.

5. Lead silk entanglement:Lead silk entanglement method is easy to learn, easy to master for beginners.When plastic surgery, Bend the branches into the required form, pad the hemp tablets at the entanglement, and use the coarse and thin lead wire to fix the shape. Lead wire should be tied to the hemp and bark, and the bark should not be damaged.To make the pile branches dense.have Some pile branches are hard and can be slotted at the lower end of the bend to make them bent natural.Tied like this, one, two After the year, the stump can be formed.In the future, fine cuts, branches, leaves, and buds can be used, and they can also be used The technique of cutting roots and rooting roots to suppress its growth and maintain a beautiful attitude.

6. Scenery: Finally, under the stump, you can also embellish some mountains and stones to make up for the lack of the stump shape.Optional ax Stone of stones, Taihu Stone, stalactites, Yingde Stone, or beautiful shapes of the common shape.It is best to use a mountain stone Strange numbers, avoid clutter, must be matched with tree stumps, pots, or far away, prevailing for your favorite.stone The seam can also be filled with fine soil and planting moss to make the whole tree stump bonsai be angry and add wild. Although it is out It is artificially like Tian Cheng.

Daily maintenance of flower and wood bonsai

1. Water

For plants, water is a very important growth factor. No matter what water is used, it is best to use river water, natural water, pond water or rain.It is necessary to put it there for a day or two, so that the chlorine gas inside is wrapped and then used, which can reduce the damage caused by chemical substances to plants, because chlorine gas is a toxic substance, and it cannot be washed by bathing water because it is convenient for saving water to save water.Water and dirty water containing fuel dirt are used to pour it. This is absolutely not desirable, otherwise the bonsai will grow into deformed and even die.

2. Fertilization

Fertilization is a technical work. If the branches and leaves of the bonsai are long, once the lack of Fertilizer, the branches will become weak, and the color of the leaves will become yellowed.The invasion of diseased and insect pests is regular and methods when fertilizing. For example, if some new planting and pelvis and the root system are damaged, they cannot fertilize within a short time.In autumn and winter, Fertilizer should be appropriately reduced, and fertilization should be stopped in winter. It cannot be fertilized at rain or at noon. It is best to control the fertilization time at night or evening.

Third, potting soil

For flower and wood bonsai pot soil, it is best to choose a well -drained flower mud. The good bonsai should be very careful during maintenance. The potting soil should be thicker. Remember to change the soil.Make the soil more fertile, you can put some base Fertilizers in the soil, so that the bonsai can be better and ensure that it has sufficient nutrition.

Four, pruning

The pruning is mainly to choose the time. Pay attention to the number and interval of trimming. The timing of the trimming is mainly in the two time periods of the late spring and early autumn. In these two times, its spakes are the strongest.Well, we must cut off some unfavorable branches when trimming, such as long branches, overlapping branches, cross -branches and dead branches. These are the objects we want to cut. Pay attention to trimmingIf the sun is too strong, move to the room first, because the cut wound will be burned by strong light, so put it in the cool place and then move to the previous position.

Five, insect prevention prevention

We can targeted insect extinguishing in accordance with different common plants when preventing insect pests.

1. A few shots of Shading nets are best

For the greenhouses that plant vegetables, not only should it be clever in summer, but also shade and cover the shade net.The shade net is divided into two, three stitches, four stitches, six needles and other species according to the fine degree of density or light transmission.The Shading net is too sparse, the Shading rate is not high, and the cooling effect is poor.The Shading net is too dense, the light is too small, and the vegetables are easy to grow.

After a summer practice, the greenhouse Shading net generally uses a three -needle Shading net, and two -needle Shading nets can also be used.Essence

At the same time, when the temperature is high in summer, the cooling effect can be enhanced by covering two layers of sunshade nets. The first layer is fixed, relatively sparse, and can be used with two stitches.The other layer is activity. You can use three stitches to open it when you need it, and put it away when you do not need it.Generally, the temperature of the temperature will be on the event at 10 am to 11 am, and the Shading net on the activity will be opened. When the temperature starts from 3 to 4 pm, it will be put away when the temperature starts to steadily decrease. This can control the temperature to a certain extent.Not long.

Second, the more the number of ungathetic net needles, the better, the better

Seeping a few stitches represent the number of pins in each inch. The more the number of pins represents the dense the eye, the better the Shading effect, but the too large number of needles will also cause the shade net to be too heavy, which is not conducive to ventilation and ventilation.Therefore, the number of needles for the choice of Shading nets needs to be determined according to the actual usage and needs.To achieve a good Shading effect, it will not affect the circulation of indoor air.

The main function of the Shading net is to block the sun and prevent plants from being sunburned or sunburned.If you want plants to better photosynthesis, you can choose a low -number of pins (such as 3 stitches or 4 stitches) may be more suitable.If you want to sunscreen better, you can choose a high -number of pins (such as 6 or 8 stitches).

1. How much is the capacity of Camping carts

When our camping equipment is more and more, we will definitely choose a Camping folding bike because it is very convenient and practical.Therefore, Camping carts are also one of our necessary equipment. When choosing Camping folding carts, how much many people are struggling with Camping carts?

Camping carts to choose 100L capacity and 100kg bearing bearing are the foundation. Of course, the bigger and better.Three -family travel, what needs to be installed is: a Tent or a sky, three chairs, a table, Picnic cushion, tableware and pots, drinks and drinks, various foods, etc.These things can be filled with your car and often come out a lot.Therefore, when conditions permit, the Camping cart can choose a large one, because the more things you will buy in the later period will be bought.

2. Whether the Camping cart has to brake

The previous article has briefly understood how much the Camping carts are suitable, so do the Camping carts brake in the choice of tires?

The Camping cart can brake the universal wheels. It is also a big selling point. It is convenient to fix the brakes, and it will not be controlled because the speed is too fast.The brakes are divided into wheel side models and wheel positives. When buying, the brakes and tire configurations can be selected in the product details page.

1. The difference between table tennis shoes and badminton shoes

In the two popular campaigns of table tennis and Badminton, suitable equipment is undoubtedly one of the important factors to improve the performance of the movement.As a direct contact point between athletes and the ground, the choice is even more important.Today, let's explore the difference between table tennis shoes and badminton shoes:

1. Shoe soles material and performance

The soles of table tennis shoes are usually used with a hard beef tendon bottom. This material is known for its excellent anti -slip and supportiveness, but the shock absorption effect is relatively limited.The side movement in the table tennis is frequent, and the athletes are required to have the ability to start quickly. Therefore, the soles of table tennis shoes are relatively thin to reduce the buffer time and ensure that the athletes can respond quickly.badminton shoes pay more attention to the comprehensive performance of non -slip, cushioning and abrasion resistance.The raw glue bottom is an ideal choice for Badminton sneakers. It can not only provide good anti -slip effects, but also maintain sufficient toughness.The soles of badminton shoes are usually thicker to deal with high impact movements such as jumping and buckle in the movement to ensure that the athlete's feet are effectively protected.

2. shoes and design

table tennis shoes are mainly simple and fashionable, focusing on breathability and comfort.The mesh breathable material not only makes the shoes look more refreshing, but also maintains sufficient ventilation during exercise to avoid excessive feet.In addition, table tennis shoes usually use a low -top design to reduce the restrictions on the ankle and facilitate the fast start and turn of the athletes.In contrast, the design of badminton shoes is more compact and functional.They usually have strong wrap, can closely fit their ankles, and provide athletes with stable support.This design helps reduce the foot sliding in the movement and improve the accuracy of the movement.

3. Use experience

table tennis shoes are loved by athletes with their light and breathable characteristics.They are not only suitable for various weather and venue conditions, but also provide good support for the feet to ensure that the athletes maintain a balance and stability in the process of fast movement and startup.badminton shoes are known for their excellent grip and wear resistance.They can meet the needs of competitions in different venues and ensure that athletes always maintain stable pace and movements in changeable environments.At the same time, badminton shoes also focus on non -slip and shock absorption performance to reduce the risk of foot injury during exercise.

4. price and cost -effective

While ensuring performance, table tennis shoes are relatively affordable and suitable for table tennis lovers.They not only have basic exercise functions, but also meet the needs of daily training and competitions at reasonable prices.badminton shoes attract professional athletes and high -end enthusiasts with their excellent performance and higher prices.Although the price is relatively high, the comprehensive protection and comfort experience provided by badminton shoes is undoubtedly worthwhile.

2. Can table tennis shoes play Badminton?

Although table tennis shoes and badminton shoes are different, table tennis shoes can still be used to play Badminton.The lightweight and peaceful bottom design of table tennis shoes is suitable for relatively stable Badminton competitions, especially at the level of beginners or amateur Badminton players.However, for those Badminton players with higher requirements, specially designed badminton shoes may be more suitable.

3. Whether badminton shoes can be used for table tennis games

If you use badminton shoes to play table tennis, you may reduce your sports performance and pose a potential threat to your security.Because the soles of badminton shoes lack sufficient friction for Carpet materials on table tennis venues.When fast movement and emergency stop, the soles of badminton shoes may slide, causing your ability to control the ball insufficient and increasing the risk of injury. Therefore, it is not recommended to wear badminton shoes to play professional table tennis games.