Profile

One red, shrubs, cylindrical roots, many branches.Stems stand upright, 1-3 meters high, 1-4 cm in diameter, hairless.The leaves are alternate, ovate-oval, oblong or lanceolate, green, full or shallow or wave-like shallow cracks, leaf surfaces are blocked or hairless, leaf back is pillar;Big, narrow oval shape, 3-7 cm long, 1-2 cm wide, usually full, very few shallow wave-shaped split edges, vermilion.Several umbrellas in the inflorescence are arranged on the top of the branches; the total buds are altar, pale green, the edge tooth shape is 5 cracks, the cracks are triangular, and hairless. , three -edged circular, Smooth and hairless.seeds ovate, gray or pale gray, nearly Smooth; no planting Fu.From October to April of the flowering period.

Native to China and America, widely cultivated in tropical and subtropical.Most of the provinces and regions in China are cultivated, commonly in parks, botanical gardens and greenhouses for viewing.Stems and leaves can be used as medicine, which has the effect of swelling and can cure damage.

Nickname

Ivory red, Laolai Jiao, Christmas flower, Christmas red, orangutu

Morphology

Yipinhong is a shrub.The roots are cylindrical, and there are many branches.The stem is upright, 1-3 (4) meters high, 1-4 (5) centimeters in diameter, hairless.Leaves are alternate, ovate-oval, oblong or lanceolate, 6-25 cm long, 4-10 cm wide, apex gradually or urgent, base wedge-shaped or narrow, green, full or shallow or shallow or shallow or shallow or shallower or shallow or shallower or shallow or shallower or shallow or shallower or shallow or shallower or shallower or shallow or crack.The wave-shaped shallow cracks, the leaf surface is short-grim or hairless, and the back of the leaves is piloted; the petiole is 2-5 cm long, hairless; no leaf; 5-7 leaf leaves, narrow oval, 3-7 cm long, 3-7 cm long, 3-7 cm long, 1-2 cm in width, usually full, very small edges are shallowly split, chocate; petiole is 2-6 cm long.

Several umbrellas in the inflorescence are arranged on the top of the branches; the inflorescence handle is 3-4 mm long; the total buds are altar-like, light green, 7-9 mm high, 6-8 mm in diameter, 5 cracked edges, cracks triangle, hairless;One of the gonads is often 2, very few, yellow, flat-faced flat, two lips, 4-5 mm long, and about 3 mm wide.Most male flowers often extends outside the buds; bracts are silk -shaped, with pour hair; 1 female flower, the subcontrape of the subway is obviously extended from the total bud, hairless; the sub -room is Smooth; the flower pillar 3, the middle of the middle, the stigma;2 Deep cracks.

fruit, three-edged circular shape, 1.5-2.0 cm long, about 1.5 cm in diameter, Smooth and hairless.seed ovate, about 1 cm long, 8-9 mm diameter, gray or gray, nearly Smooth; no planting Fu.From October to April of the flowering period.

variety

Common varieties are:

Gold Award: The oval dark green leaves, bright and bright red bracts, compact plant type, can grow into a very beautiful crown surface without using a growth agent, adapt to a wide range of regions, and the inductive period is 6.5-7 weeks.

Banner: The leaves are dark green, red bracts, compact plant types, and good branches; no strong growth inhibitors are required; neat crowns; and 7-7.5 weeks.

Sunshine: The leaves are dark green, bright and bright red bracts, compact plant types, well-developed root systems, strong branches, good branches, large number of buds and neatness.week.

Cuzmo: The leaves are dark green, bright red bracts, compact plant types, strong growth potential, 8 weeks of induction period.

Yipin white: bracts milky white.

Yipin powder: bracts pink.

Yipin Yellow: Baging is pale yellow.

Crimson red: the bracts are dark red.

Three -fold and red: bracts of leaf -shaped, bright red.

Dental petals are red: gray leaves, bracts red, staple petals.

Hertita Ek: The bracts are bright red, with severe petals, and the outer bracts are flat. The inner bracts are upright, which is very beautiful.

Ballo -shaped red: bracts are blood -red, heavy petals, rolled up and down bracts into spherical shape, and grow slowly.

The spots are red: the leaves are light gray green, white spots, and the bracts are bright red.

Miss Paul Ek: leaves wide, leaf -shaped, bracts are blood red.

The new varieties are festive red: dwarf, large bracts, bright red.Pitto is red, the bracts are wide, dark red.

Victory Red: The leaves are wound, and the bracts are red.

Orange -red Liluo: Bags are large, orange -red.

Pearl: Baging yellow and white.

Pipchi Aiqiao: Dwarf species, dark green leaf, dark red bracts, no hormone treatment.

Suitable place

There are many red flowers in one product. They are ornamental plants. They are generally planted in public places such as parks, botanical gardens, and Square flowers, which can add a festive atmosphere.Yipinhong can also be cultivated indoors as pots.Common Yipinhong is placed in the study, living room, etc.However, it is not recommended to put it in the bedroom.The bedroom space is small, and the light is not suitable for its growth. What's more important is that the red itself is toxic, which is not conducive to the safety of children and pets.

Effectiveness and role

Viewing value

Yipin red -branched and leaves are beautiful and bright, and the flowering period is long. It is at Christmas, New Year's Day, and the spring Festival. The red color adds a festive atmosphere. On holidays, the red is to watch in the form of patterns. The effect is very good.

Family decoration

With the development of high -rise urban buildings, most of the time is active indoors.In addition to the beautiful furniture and furnishings in the family room, if you can use Potted flowers, bonsai and flower arrangement as an indoor decoration, it will have a unique flavor., Feel comfortable.Yipin's unique and gorgeous red bracts are eye -catching. When the window sills, balconies or study are embellished, they are red and charming.

Feng Shui effect

Yipin red flower color is gorgeous. Because it is on the New Year's Day and the spring Festival, it has a good meaning of celebrating the same celebration and wishing the new life. At this time, it is used to set up places such as home living rooms. It is easy to bring good luck to family members in Feng Shui.

Medicinal value

Yipin is red and cool, tastes bitter, and has the function of regulating menstruation and hemostasis, blood circulation and phlegm, and Bone and swelling.After the treatment of more menstruation, cold cold cough, bruises, trauma bleeding, fractures, swelling and pain.The use of an appropriate amount of red can treat functional uterine bleeding, and it also has a certain effect on the swelling and pain. You can take an appropriate amount of red fresh leaves and smash the external application.

Breeding method

illumination

Yipinhonghuan is full of light, and has a strong light, which is a short -day plant.Both the four seasons should be obtained throughout the year, the bracts are discolored and the flower bud differentiation, and it is more important during flowering.If the light is insufficient, the branches are easy to grow long, susceptible to disease, the color is dim, and the dark places are placed in the dark place for a long time, and it will not bloom and leave leaves in winter.In order to bloom in advance or delay, the light can be controlled. Generally, 8 to 9 hours of light is given every day, and it can be blooming in 40 days.

Humidity/watering

Yipin is not resistant to drought and water and humidity. Watering should be flexibly grasped according to the weather, potting soil and plant growth. Generally, watering is to keep the pot soil moist and not accumulate, but the watering should be reduced after flowering.Pay attention to mixing evenly to prevent too much dryness, otherwise the leaves of the lower part of the plant will yellow and fall off, commonly known as "getting off the feet", or the growth of the branches is uneven.

temperature

Yipin Hongxi is warm and afraid of cold.Entering indoor in mid -to -late September of each year, ventilation should be strengthened so that the plants will gradually adapt to the indoor environment. In winter, room temperature should be kept 15 C to 20 C.At this time, the chromatography and flower bud differentiation are at this time. If the room temperature is below 15 C, the flowers and leaves are poor.Entering the flowering stage after mid -December, it is necessary to gradually ventilate.

soil

One of the soil with a loose and well -drained soil. Generally, 3 parts of vegetable garden soil, 3 humus soil, 3 parts of elastic leaf soil, and 1 rotten cake Fertilizer are mixed with a small amount of slag.

Fertilize

Yipinhong likes fertile sandy soil.In addition to the upper pots and pots, add Organic fertilizer and horseshoe slices as base Fertilizers. In the growth and flowering season, diluted 5 times from 10 to 15 days to dilute 5 times the rotten sauce residue Fertilizer.After the autumn, 0.3%Compound fertilizer can also be used, and it can be applied once a week for 3 to 4 consecutive times to promote the discoloration of bracts and flower bud differentiation.

Tingle

After 3 weeks of planting, the root system has grown. At this time, you can get topped. Leave 4-6 leaf sections during topping. The temperature is increased to 28-30 C at night, and the night temperature is 23 C.When you see the buds grow, then slowly reduce the temperature. It is 25-28 C during the day and the humidity should be reduced.Essence

prune

During the Qingming Festival, the sleeping old plant is changed to the basin, cutting old roots and weak branches, and promoting new techniques. During the growth process, you need to topped twice.During the cultivation, large hypertrophy should be controlled, especially before the autumn plants are set.When the branches are 20 to 30 cm long, the plastic surgery is began to bend. The purpose is to make the plant shape short, the flower head is neat, and evenly distributed to improve the ornamental.

Control strain

During the cultivation process, plant growth regulators are required to be dwarfed to the height of the plant to meet the consistent requirements of the commodity flower.In addition, it is very important to maintain the consistency of day and night temperature during the cultivation period. It should be tracked and monitored at any time. When the temperature difference between day and night exceeds 3 C, you can spray 750 to 1000 ppm with a short sturgeon of 1 to 4 times to suppress the stems to suppress the stemsStalk is long.

Frequently problem handling

Breeding method

1. Cuttings

There are two ways: half -hard cuttings and tender cuttings, as well as old -rooted cuttings.No matter what kind of cutting propagation method is adopted, a red cuttings should be cut in the early morning.Because the moisture content of cuttings at this time is sufficient.When cutting the cuttings, the incision is required to be Smooth, and the split epidermis and wooden parts should be cut to avoid stagnant water rot and affect healing.

The cuttings incision is cut into a flat portal or slope, and the incision is required to be 0.5 cm at the base of the bud, which is more easy to take root.The white glue emulsion flowing out of the incision should be cleaned with water, and the incision is applied to fresh clay or grass -grained ash before cutting, or dipped root powder to promote its root.The solution is immersed in the cut -off of the cut red screebon in the solution for about 10 minutes to increase the survival rate.The base is cut immediately after processing the above methods. The depth of the cuttings insertion of the cuttings generally does not exceed 2.5 cm. If the cuttings are too deep, the lower incision is easy to rot; the row distance of the cuttings should be 4 cm 4 cm.

Semi-hard branches: Most of the red and semi-hard branches are mostly carried out from March-May in spring, and the general temperature can be above 15 C.During cutting, cut the one -year -old woody or semi -wood branch, about 10 cm long, cut off the leaves and branches on the cuttings, and the base incision is cut into a slope and close to the section, dipped in the gray ash, wait for the cutting mouth to dry before drying it before drying the mouth before drying the mouth before drying the mouth before drying the mouth before drying the mouth before drying the mouth before drying the mouth before drying the mouth before drying the mouth before drying the mouth before driedInsert the fine sand, pour water after inserting, keep the temperature at 22-24 C, and take root after 20 days.During the cuttings, we should pay attention to shade to prevent water loss and branches.

Cuttings of tender branches: When the red branches growing to 6-8 leaves of the year, take 6-8 cm long, a section of tender shoots in 3-4 sections, cut it under the section, remove the large leaves at the base, immediately immediately, immediately immediately, immediately after removing the large leaves at the base.Put into water to prevent the milk from flowing out, and then cuttings. After cutting, the tender stems and blades should be ensured after cutting, and measures are taken.Most varieties of tender branches can take root in 14-18 days.Yipinhong has a fast roots with tender branches and high survival rate.If cutting in the self -made greenhouse, as long as the indoor temperature is kept at about 22 C, cuttings can be cut in late March.And it can last until September.

Lao Gen cuttings: After years of red cultivation, it can also breed into new plants with its roots.Because in the spring in March and April in spring, when Yipin is out of the house, it is necessary to turn over the pot and change the soil to supplement the material of the pot soil and the roots of the stem repair.In the process of operation, people often abandon the old red roots cut, but if you collect older root stems of more than 0.5 cm, it will be a large number of reproductive materials available.

The specific method is to cut the old root of Yipin into a root section of about 10 cm, and then dip the dried charcoal powder or plant ash, and dry soil powder at the cut.If there are a few roots, it is more likely to germinate new buds).As for the cuttings container, generally, if the amount is small, a deeper pot can be used, and if the number is large, you can cut in the seedbed.

When cutting, the soil surface is 1 centimeter, and the northward tilt and the ground are about 80 angle, which can promote the new buds to germinate the root section as soon as possible.There is no need to shade after cutting. For about a month, new plants can be breed.When the new plant is as high as about 10 cm, it can be transplanted to the basin. After about 5 days to 1 week, it can be carried out normally.

2. Pressure

Pressing breeding is to press the plant near the ground under the ground, and the higher branches are wrapped (or wounded) with wet materials such as moss.Breeding method.High -pressure reproduction is generally adopted.

First, choose the wooden branches. Generally, choose a healthy and fulfilling branch of the first year, and the circular peeling in the Smooth part.At the branch of the branches, the upper incision should be Smooth, and then lightly scrape the knife to form a layer.Wrap wet water moss or other loose and breathable materials on the incision.Generally, a polyethylene film with a 20-25 cm Square has good carbon dioxide and oxygen permeability, and has low water vapor conduction, which can resist climate change for a long period of time).The upper and lower ends are tightly tied (especially the lower end). If the tie is not tight, the matrix is easy to dry, which will affect the root of the incision.

After a red pressure bars, the root system can be long after about two months. At this time, it can be cut and planted in the pot to form a new plant.The time of Yipin Red Pressure is preferably in April to July.

Prevention and treatment of pests and insect pests

Gray mold

Gray mold is mainly in winter. It is the season of red flowing flowers. Once it encounters cloudy and rainy, humid and no sunlight, it can harm a red inflorescence, bracts, leaves, and branches.Generally, water -soaking lesions start from the tidbits.Later, the lesion was covered with a layer of pathogenic gangs, and the pathogen bacteria continued to the bract.Initially produced water immersion and fading spots in the early stage, gradually expanded to irregular shapes, pathogenic bacteria were expanded to branches, and yellow -brown to brown lesions were produced on the branches.The place is dry and dry.The pathogenic bacteria is Botrytis, which can survive in its own dead plant tissue or other organic substances, and has a wide range of parasites.It can survive at a temperature of 0-38 C. As long as there is moisture, it exists.If the greenhouse is too humid, cold, and insufficient light, after 1-2D, pathogenic bacteria will produce a large number of robes and be infected with plant tissues in the air.

Prevention and control method: Use the characteristics of closure of facilities to create a high -temperature, low -humidity ecological environment, and control the occurrence and development of gray mold.The indoor humidity of the facility is higher than 90%. After pulling it in the early morning, the ventilation is turned on, ventilation and humidity, reducing the indoor humidity, and controlling the development of the disease at a lower temperature.When the indoor temperature is accelerated at 9 o'clock, the ventilation port is closed to quickly increase the indoor temperature to about 32 C.

Root rot

Root rot and stem rot can be infected into plants, and can also be infected in the seedbed stage, causing serious losses.Generally, it is more serious in high temperature season, and it is also easy to occur when the water content of cultivation soil is high.In the early stage of the plant, withering and withering. At this time, if the base of its stem is viewed, it can be seen that the phenomenon of light brown -colored crickets, but the phenomenon of infected diseases has not seen corruption and hydrolysis.The lesions are slightly depressed with yellow -brown, and the tissue of the maternal spots in the later period is disintegrated, causing the plants to wither due to the severe water dehydration. Sometimes the entire plant is immersed in yellowing, which will eventually rot and die.In severe cases, it can be extended to cultivation soil.When the root is sick, the root rot often affects the normal growth of the plants in the early stage, which causes death in severe cases.The pathogenic bacteria are mainly epidemic bacteria, diaphragm nucleus, and fungic bacteria.When the salt accumulates on the surface of the medium; when the fungic bacteria appear when a grade is red, it may be invaded when cutting. When the environment is suitable for reproduction, it will deteriorate, causing rotten and death; excessive high temperature and irrigation (adversity conditions) can beCauses the epidemic germs to harm.

Control method:

1. Perform rotation.Light-ill field rotation the next year, and the severe illness field is 3-5 years.

2. Deeply cultivate the soil, increase the application of Organic fertilizer, reasonably discharge irrigation, and enhance the anti -disease power.

3. Strict selection and eliminate unqualified seeds.0.5%of the seed weight are planted with 50%polymorrhea wettable powder.

4. When the onset of the onset, use a 50%bacterial wettable powder 1000 times to spray the stem base of the Peanut, 25-30 kg per acre.

Chloropathy

Leaf spot disease is mainly serious in spring and summer, and most of the lesions start from old leaves.In the initial leaves, purple -red to small brown spots were generated. The lesions were nearly round to irregular. In the future, the lesions gradually expanded. Most lesions can heal each other to form a large lesion.EssenceIn severe cases, the lesion tissue is a bad gangrene, causing the leaves to twist and dry.

Control method:

Remove the disease tissue in time and concentrate.

Rotation (replacement of soil in the greenhouse).

It should not be sprayed with plants.

Spray drugs from the beginning of the onset to prevent the expansion of the disease.

Men

The pests of a red red mainly include medium, leaf mites, thrips, etc.The adults and larvae of the reflux of the refreshing reflux of the refueling of the refueling of the upper part of the Yipin red with a stabbing portable mouth to suck the juice, the leaves fade or have a green spots, which will affect the photosynthesis, resulting in poor plant growth.Mulu often causes mold.Adults are yellow.The feather time starts from 6 am, and the amount of feather is the most at 7-8 am, and the lowest in the evening.Palaceies are the most vulnerable to mobilize larvae, followed by rigidity, which is sensitive to pharmaceuticals and is suitable for spray prevention and control.Panels generally occur largely when high temperature and low humidity, and the peak period is from late September-late November.Its most suitable prevention period is late September, and the spray time is 6-10 in the morning.

Potting

Maintaining Yipinhong should do a good job of Fertilizer and water management, control the fixed head, and keep warm and cold.

Pay attention to mixing evenly to prevent too much dryness, otherwise the leaves of the lower part of the plant will yellow and fall off, commonly known as "getting off the feet", or the growth of the branches is uneven.In the yellow plum seasons and summer showers, water should be prevented from accumulating water in the basin. After the rain, pour water on the side in time, or move it indoors before the rain.In summer, the weather is hot, and the amount of water requires a lot of water. Pour water every morning. Observe in the evening. If the pot soil is found, the water should be supplemented once. This time, the amount of water can be less.spring and autumn is usually watered once 1-2 days, depending on the wet and wetness of the weather and the pot soil.

The fertilization work of Zhongbuki cannot be ignored. After 2-3 weeks of the pot, you can use small bamboo slices to loose pot soil to make the soil air circulation. Then you can apply some liquid Fertilizer and use 20%of rotten manure urine and soybean water.From mid -8th to October, the number of Fertilizers needs to be added, applied for about 10 days, and appropriately Qingchuan.The concentration of the Fertilizers of a few gods can also be slightly thicker, with 30%rotten chicken, duck, pigeon dung water.It can promote the full growth when the flower buds are formed.

After the red on the pot, it grows fast. It is necessary to control the fixed head. Otherwise, the branches will grow too high, the wind is easy to fall, and it will affect the beauty of the posture.Fixed heads can be divided into two types: straight head or tie scenery as needed.The form of straight head is that after the last head of June, let the branches grow, and can grow to 60-70 cm high.And when the tiecerine needs to grow up to L0-15 cm, cut it into 15-20 cm at a section with lead wire, bend the upper end into a hook shape, insert the lower end into the pot soil.After about 10 days, the branches continue to grow about centimeters, and then seduce the branches along the horizontal direction of the pot. After another 10 days, the branches that have reached the pot are guided up.From mid-September to late October, each flower head is tied with a 30-40 cm long bamboo pole, and the branches can be organized if there is a height of the branches, tie the high, and pull it up.This method fee = L is more, but it can make the pots neat.Many red dwarf species are introduced abroad. As long as the head control is controlled, the target of short, large flowers, and flowers can be achieved.

Yipinhong October, in October, is frost to move forward indoors. It is too late to be frozen. Too high indoor temperature is too high, which will cause the plant to grow long.When it was just moved to the room, it was placed in the ventilation place; by mid -October, it should be placed in a warm place to the south to the sun, and no longer was hit by the cold wind, so as not to fall off.Generally, in the middle and middle of December, the leaves of the red top of the red turn red, and the green leaves are set off, which looks particularly red.

precautions

1. Yipinhong's response to water is more sensitive. As long as the water is sufficient, the stems and leaves grow rapidly.Instead, water is lacking or dry and wet, which will cause the leaves to fall off.Therefore, the control of Yipin red water directly affects its growth and development.

2. Yipin red is a happy flower flower. In the strong light, it grows strong. Except for the shade and cooling in summer, the light should be sufficient in other seasons.Even in summer, Shading can cause thin stems and increase leaves.

3. Yipinhong enters the shed in mid -to -late October. When entering the shed at the beginning, it is necessary to unveil the ends of the shed to reduce the temperature difference between the inside and outside of the shed and avoid the yellow or fallen leaves of the leaves, which affects the quality of the flower.Keep it above 20 C during the day, and the temperature at night must not be lower than 15 C. Otherwise, it will grow slowly, which is not conducive to the formation of bracts, and the temperature is too low, which will also cause yellow leaves and fallen leaves.The red indoors should turn the basin every day to keep it lightly to prevent the branches from being bent and growing.After the shed, the amount of red watering must be strictly controlled. The humidity is too large, and the flowers and leaves are easy to mildew;Watering less after flowering.

4,Some people think that the full red plant is toxic, and the white juice in the stems and leaves can stimulate the Skin, which may cause redness and swelling of the Skin, causing allergic reactions. If you eat stems and leaves by mistake, it will vomit, abdominal pain, and even poisoning.However, watching and placement will not cause harm to the human body and the environment, but it must be placed in places where children are not easy to get enough.

Beihai fishing period and fisheries periodTime and its regulations

Beihai City fishing period

According to the "Notice of the Ministry of agriculture and Rural Affairs on Adjusting the Marine Valua Season Restiviation System", the information of the North Sea fishing period is as follows:

1. fishing waters

The South China Sea (including Beibu Gulf) waters north of the north latitude.

2. Types of fishing rest work

All types of operations other than fishing tools, as well as fishing auxiliary vessels for fishing vessels.

3. fishing time

From 12:00 on May 1 to 12:00 on August 16.

Beihai inland fishing time

The Beihai agricultural and Rural Bureau released the implementation plan of the fishing period of the inland waters in Beihai City.

1. fishing time

From 0:00 on March 1 to 24:00 on June 30.

2. Scope of ban fishing

Beihai jurisdiction over all natural waters inland, and Tongjiang Lakes and Reservoir areas.

Third, the target of fishing

All types of fishing operations except for leisure fisheries, entertainment fishing (shipless, boat, etc.).Those who need to capture natural fishery resources due to breeding production or scientific research investigations shall be approved by the competent fishery administrative department of the autonomous region or above in accordance with the provisions of the Fisheries Law of the People's Republic of China.

1. Can bikini be everywhere underwear?

bikini cannot be worn as underwear.

The underwear and bikini are different and the design is different.bikini should be suitable for dressed in underwater exercise. This requires elasticity and waterproof. The resistance to water during underwater exercise is relatively small. Therefore, bikini will be designed as tight styles.

The main role of underwear is to protect women's breasts, which can play a role in shaping and support, and the production process is relatively complicated.At the same time, it is not too tight to wear, so it is breathable, Skin -friendly, and hygroscopic. It can keep the Skin dry at any time.

bikini is generally worn during swimming in summer, and underwear is worn all year round. bikini cannot replace underwear because bikini does not have the breathability and hygroscopicness of underwear.Similarly, underwear cannot replace bikinis because the underwear does not have waterproof properties, and cotton underwear will become translucent after absorbing water, which will easily cause embarrassing scenes.

2. Can bikini be worn as pajamas?

bikini's material, function, etc. are completely different from pajamas. If you must wear it like this, it is easy to sleep when you sleep.bikini's material is generally dry and waterproof. It is very hydrophilic, that is, the hygroscopicity is not strong. When people sweat, they will produce a sense of sweltering because it cannot absorb.In addition, the function of bikini is also special. It is usually a little tighter. It needs to prevent light and cannot provide a better relaxation, so it cannot be worn as pajamas.

Classification of insoles

Classification

1. Healthcare insoles are insoles that have health benefits to people.Such as: antibacterial insoles, deodorant insoles, traditional Chinese medicine insoles, etc.

2. Functional insoles: shoes with special functions.Such as: anti -static insoles, height insoles, waterproof insoles, air circulating insoles, etc.

3. Conventional insoles: It does not have the above 2 points of insoles. This is very common.

Material classification

1. EVA insole

2. Sponge insole

3. Silicone insole

4. TPR insole

5. latex insole

6. Cloth insole

7. Leather insole

8. CPU insole

Use classification

1. sports insole

2. Air circulating insole

3. Correct insole

4. Shock -absorbing insole

5. Keep warm insole

6. Grow up insole

7. Anti -slip insole

8. Electronic heating insole

9. Massage insole

10. Magnetic insole

11. Anti -static insole

12. Drug insole

13. waterproof insole

14. Conventional insoles

Appearance size classification

1. The whole insole

2. Semi -code pad (semi -insert)

3. Seven -point pad

4: front palm pad

5. Follow pads

6. Post -followed post

7, waist sticker

Production process classification

1. Cold pressure molding insole

2. Hot pressure molding insole

3. Watering molding insole

4. injection molding insole

5. Textile molding insole

6. Handmade embroidered insoles.

Pay attention when buying insoles

Don't be too superstitious about health insoles.Take the massage insole, there are dozens of reflex areas on one foot of a person. The main organs of the human body, such as heart, liver, kidney, etc., there are corresponding reflex areas on the feet, but the massage point on the insole is ""The net" lacks targeted, and its therapeutic effect can be imagined.If you wear improperly, the Skin of the feet will be thickened, and sometimes it will even cause side effects.

Diabetes patients are prone to and vascular neuropathy caused diabetes. The Skin of the feet is very vulnerable to damage, and it is not easy to heal after being damaged.Therefore, diabetic patients should avoid using a massage insole, but a comfortable cotton insole should be used.

The orthopedic insole has a certain correction effect on the mild deformity of some feet. It can slow down the local excessive pressure caused by the foot deformity of the feet, thereby relieving foot fatigue.But orthopedic insoles must be used under the guidance of orthopedics.

For different shoes, the ideal insole should have different hardness. For example, the hardness of the insoles of leather shoes should be smaller, and the hardness of the sports shoes insoles should be slightly higher.

Pay attention when using insole

Sanitary: The insole is best replaced every day.Wash the insole with soapy water once a week to keep the insoles dry and clean to prevent ringworm feet from the breeding of mold.

Regular replacement: Because the insole has a certain shock absorption performance, after a long period of use, the performance of the insole will be destroyed.Generally speaking, when the sports insoles are equipped in the sneakers, half of the shoe's life is consumed, the insoles have been "ended in the end."For sports insoles, there is a basic replacement principle: after 150 hours of aerobic exercise, the insoles will lose elasticity, and they should be replaced at this time.

window flower design

1. Simplicity: Only use one design idea each time. If you are anxious to show all kinds of works, it will only look messy.

2. Planning work and layout: Use baffles, brackets, platforms, etc. to put the works in place. Note that there should be a clear focus among all works.

3. Use lighting equipment to create an atmosphere: With artificial lighting, the light in the window will not appear in the fish tank effect with natural light, and it will always be eye -catching.The amount of lighting needs for dark flowers is relatively large.If the store is close to the traffic avenue, it should also light up the lighting in the window at night.

4. Use the color to answer the message you want to reveal: the dark color makes the window look close; light color makes the window look more space.The color of the window should not exceed 4 types, and the main color should be based on three of them. The prominent color theme is more attractive to consumers.Use the same color and different varieties of flowers to achieve unexpected results.

5. LOGO should be easily seen by passers -by: logo is the symbol of the brand. The conspicuous LOGO can increase the store entry rate and increase brand exposure and recognition.

6. Dynamic display methods: Put some small Fountains, waterfalls, and windmills. These items can play a role in displaying the theme, or it can only be used to activate the atmosphere.

7. Keep the window clean: Every day, you should wipe the inside and outer glass of the window to clean up the losses and flyworms in time to help your floral works always maintain a good state.

8. Regular replacement of the exhibition content: In addition to the major festivals such as Valentine's Day, you should also replace the theme every few weeks according to your actual ability.Major festivals can even be displayed 4 to 6 weeks in advance.It is best to choose the time to replace the window. It is best to choose from the business hours, and it is necessary to replace it with a window and one window to avoid the feeling of "the flower shop seems to be empty".

9. Use decorative materials: The store should always be reserved with commonly used decorative materials, and should be placed in different categories in order to take it.When choosing decorative materials, you may wish to learn the window display of large shopping malls.

10. The window display must have the theme: all festivals are the topics that cannot be ignored.In addition, you can also depict a certain scene in daily life: birthday party, anniversary celebration, wedding, graduation ceremony, etc. as the theme. It can also be displayed in certain types of flowers: such as silk flowers and bonsai.

Banquet floral design

Features of banquet flower art design characteristics

Banquet flower art design is a form of floral design that specializes in high -end banquets. It combines banquet design with flower art design, and uses floral design to control the style of the entire banquet and the essence of conveying the entire banquet.The most notable thing is that the design of flower art design has become an indispensable content in the banquet design.

The purpose of the banquet flower art design is to create a spatial environment with visual impact and aesthetics with floral design, and take the mood of joy as the main purpose.

Generally speaking, the banquet floral design has four major characteristics: first, the combination of flower art and venue, catering, lighting, utensils and candlers is closer; second, the banquet flower art design has higher requirements for color; thirdBanquet flower art design positioning is more high -end, and the designer's aesthetic and design control capabilities have higher requirements; fourth, the revenue of banquet flower art designers is more considerable, and the crowd is more high -end.

precautions for banquet flower art design

1. Do not choose too much fragrant flowers. The indoor banquet has not good ventilation.In addition, the too strong floral fragrance will cover the taste of the food and affect the guests' meals.

2. Do not use flowers with too dark colors, because indoor light will be much lower than outdoors. When the color of the flower on the flower material itself is darker than before, it will not reach the expected feeling.

table floral design

1. Both containers can be inserted.Sometimes, the more you use the "flower" that is not a flower, the more likely it is, the easier it is to give people a deep impression.From milk cups, Bailan Di Cup, color glass, various bottles and even test tubes, to small baskets of ceramic bowl, small iron barrel or rattan, there is nothing taboo.

2. It looks like I haven't taken care of it.The flowers on the desktop can make the desktop quickly have an atmosphere, and the requirements for these flowers are -it looks like it has not been taken care of.A simple but exquisite and casual flower may spend more time you spend, but it is much more fashionable than stereotypes, even if it is high -end and fashionable dinner, it is no exception.Like the flowers that were taken off in the garden, inserted in the bottle carelessly.There is no technical difficulty, but it makes the atmosphere particularly easy.

3. On the round table, the flower is the center of the table.If it is a round table, you can set a flower arrangement at the center of the round, or put a set of different glassware that are high and low, and insert flowers in it. The main point is to look at it from all angles.

Putting a 360 viewing flower design at the center of the round table is the most common method.The round table is arranged with different candlesticks or flowers to make the desktop look more relaxed, but it does not lose the core.

4. The flowers on the long table can repeat a theme.If it is a long table, you need to place a group of flowers, you can repeat a theme: Maybe it is a simple vase, which is covered with daisies, or a group of two or three glass bottles. Each there are one or two flowers insideIt is the most important thing to keep the long desktop rhythm.

There are many elements, but the most important elements are repeatedly interspersed and do not seek neat, but the rhythm remains stable.

5. vegetables and fruits are the choice of "flowers" on the desktop.The flowers that arrange the desktop do not need to be famous for their own preciousness. The attractive place is that they are fresh enough.Except for flowers, plants, grass, vegetables, and fruits can be the theme of desktop decoration. Mixing them and putting them in the bottle are all unexpected desktop layouts.Or dig a hole in the vegetables, fill the mud inside, and the cabbage of the cabbage becomes an interesting flower.

6. It is also beautiful to put the small potting directly on the table.The small green plant or flowering plant is also beautiful on the table together. It is very natural and fresh, especially suitable for meals in the yard.

7. Or put the leaves directly on the table. When the cost is expensive, try to create a relaxed and literary tone that can be created.The two leaves are mixed together, and the Levels are rich.It should be noted that this is to be placed, and you need to choose a leaf material that is not easy to wither.

8. flowers can also fall from the air and echo the flower art on the desktop.If technology can be achieved, this approach is very visual impact.If there is a chandelier on the table, it is not difficult to try simple decoration.

9. The color of the flowers has some echo and the dining table, or it is to make the entire table integrate with the tablecloth or tableware and utensils.It is not easy to play casual, but the rectification can be easily achieved.Both flowers and table flags and napkins echoed, which impressed people.

10. Too fragrant flowers are not suitable for placing on the table, as well as candles, because its breath will affect the taste of food and human appetite.In the same way, the aromatherapy candles should never be placed on the table.

11. The height of the flower is higher than the sight, or it should be lower than the sight.No matter how beautiful the flowers can not hinder the communication between guests, don't let everyone catch and seek in the flowers. If the huge flower design is too large, you can move aside at the beginning of the meal.The flowers on the top are very visually effective, but it must be high enough. After the guests enter, the height of the sight is the standard.The flowers below the sight are the most ideal companion on the table.

12. How to place flowers depends on the number of dishes and the way of dining.It is still simple to embellish in the middle of the long table. This depends on the food -shaped western food, or it is necessary to share the Chinese food that needs to be shared.

Wedding floral design

Bouquet

The bride's bouquet carries the happy and happy future of newcomers, and the bride's bouquets also originated from the Western religious wedding ceremony.When choosing a bouquet, the prospective bride should choose the figure, dress and hairstyle of the bride. The most important thing is the bouquet that is consistent with the theme of the wedding.If you choose a bride with a white wedding dress, then red roses, yellow chrysanthemums and African chrysanthemums are the best choices for your bouquets.If you use Phalaenopsis or Dendrobium, it will be more pretty.For red wedding dresses, you can use the more elegant carnations, horseshoe lotus, lily flower, etc. The round and water drops and triangle bouquets are more classic styles, and these styles are very versatile.

If you are a tall bride, you can choose a three -stage type, bending moon, drooping and waterfall -shaped bouquets. This can more set off the bride's temperament. The curve and gorgeous wedding dress are the fastest.For Outdoor weddings, spherical and grip (bouquet) bouquets are the best, because these bouquets can give a cute and sweet or natural feeling.The S -type bouquet is a change in the evolution. The elegant lines give people a warm and unique visual effect, suitable for some brides with graceful personality and moving character.

Bust

The wearing of the chest flower must be coordinated with the overall color of the clothing, otherwise there will be the meaning of painting snake.The principle of flower flower flowers is not more refined, and the flower material of the chest flowers can be divided into each component.The general chest flower is composed of three parts: main flower, auxiliary flower and distribution leaves. The main flowers are mainly blocking flowers.It is a small flower -like flower -based flower, which sets off the brightness of the main flower.

Welcoming area

New people in the welcoming area should pay special attention, because the welcome district is the first impression of this wedding to guests, so it seems particularly important.Therefore, in terms of style, we must be unified and ingenious.The flower artifacts of the flower art district, whether it is glass, rattan, potted, spherical or columnar, should be from solemn and elegant.Achieving an unexpected visual effect.

Welcoming card

The welcome card also occupies an important position during the wedding. The welcome card is generally placed at the door of the wedding venue.In addition to the exquisite brackets and designed outstanding posters in advance, they also have to decorate flowers around the brand or a corner, so as to highlight the gorgeous feeling.

Sign in

Wedding sign -in table can also be said to be the first impression of guests on the wedding.Wedding sign -in tables can generally be based on bright roses, as the main decoration. Then they can put two sweet and warm wedding photos and some lace jewelry to create a romantic atmosphere of the entire wedding.

Ritual area

If it is an extramarital wedding, the ritual area of the newcomer can be the main stage of the lawn, courtyard, or the main stage of the wedding banquet scene that can enjoy the sun.The color of the floral art can be as tender, lively, and jumping as much as possible.If it is an indoor wedding, the ritual area is mainly as cold as possible, or decorated with the flower art with clear tones. This can blend the indoor environment Lights well.force.

If the newcomer chooses a rose -based wedding scene, then prepare more rose petals, so that American petals are scattered on roads, ritual stations, etc. The romantic index will rise immediately.If a flower -shaped but colorful flower material is used for matching, or it will be matched with a unified color without flower shape, it will bring you an unexpected effect.

Pillar flower

In modern weddings, pillar flowers are generally selected according to the theme of the wedding and season. Pure western style is generally elegant flower material, such as lily, self -hand, pink rose, etc.At the combination of Chinese and Western or Chinese -style weddings, roses, oranges, etc. are relatively common flowers.Specific matching can be ever -changing, and there are many elements that can be added in high and low, such as fruits, feathers, beads, ribbons, etc.

arch

The arch is special at the wedding. It is not only a beautiful device, but also a exaggerated meaning, which leads to a happy day.Every new couple hopes that their lives in the future can be sweet and exaggerated when they get married. In the arch design of the arch, they generally use light yarn, ribbon and balloon to match flowers.It has achieved a very romantic effect.Of course, you can also provide your own ideas and let the wedding company cooperate with you.

Road lead

The wedding road is a decoration on the aisle where the bride leads to the stage. It represents the newcomer to start to the road of happiness in life, which means that the newcomer's future life will be beautiful and sweet.Generally, there are arc -shaped iron roads, light -pillar roads, crystal road leads, Jinchang road lead, Roman pillar road, etc., placed on both sides of the newcomer's entry route, with slender brackets with flowersoverflow.

dining table

The flower art on the dining table can be appropriately settled at the atmosphere of the scene. New people must understand the color of the hotel tablecloth and chair cover in advance, which is important to the color of the flower material.The amount of flowers at the wedding is not necessarily proportional to the effect. Good floral style and taste are the most important.Too many floral arts are willing to bring a lot of waste, and skillfully match some vines, stars or leaf -viewing plants, but has a more visual sense of visual hierarchy.In addition to the main flower, a small flower or blade with the same flower on each guest's napkin can make the wedding more delicate.

Splitter

In the holding of modern weddings, there are very few newcomers who will use them, but whether the wedding is exquisite or not, it often gives guests a warm feeling on some small details.In fact, the decoration of the mouth of the mouth is not cumbersome. Generally, only one carnation or a rose is needed, and it does not matter if it is not equipped.

chair

Many newcomers often ignore the decoration of the back of the chair, because the back of the chair is small and inconspicuous.Then if you have such an idea, it is very wrong. In fact, the back of the chair is an important detail part of the wedding whole and perfect.Generally, only two or three main flowers are required for the layout of two or three weddings, and simple decorations such as ribbon can be added.

Wedding car

1. The front decoration

The front of the vehicle is the most important part of the vehicle decoration, and it is also the key ornamental part of the wedding car flower art. Today, the wedding car decoration is increasingly observed by the flower shop.In order to attract newcomers, flower shops have continuously launched various wedding car decorations.The main forms of wedding float decoration are: setting decoration, forming decoration, float dot, and float ribbon decoration.It is common to decorate the style of Western flower arrangement. It is combined with more flower and leaves to form a relatively regular pattern, giving people a sense of atmosphere, enthusiasm, and festive. It is important to choose flower materials.It also uses an east or modern free -style flower arrangement style to decorate. It is combined with less flower and leaves into an irregular pattern, giving people a new, chic and romantic feeling.A more popular approach is to place a pair of cloth dolls in wedding clothing on the front of the car to symbolize the sweetness and happiness of the newcomer.

2. Wedding car decoration

The color is bright, fresh, flower is big, and the meaning is good.The gorgeous and strong flowers can reflect the lively and festive atmosphere. The flowers must be fresh, that is, it is a short time to leave the mother's time, intact, and no loss.flowers refer to the number of flowers and a large amount of flowers.The meaning of flowers is good, which refers to the flower language, such as lily imply a hundred years of good combination, and the meaning of paradise birds is more than the wing.

3. Wedding car flower material

The flowers commonly used on wedding cars include lily, red palm, heaven bird, dancing orchid, Phalaenopsis, rose, sword orchids, African chrysanthemum, carnations, bellflower, full of celestial, lover's grass, don't forget me;It is Brazilian wood leaf, needle sunflower, loose tail sunflower, sword leaf, turtle leaf, water taro leaf, Wenzhu, Penglaisong, Tianmen Dong and so on.

Business floral design

Lobby

It is often used in lobbys of various hotels and buildings.The lobbyal layout of the lobby with a significant decoration and beautification has become an indispensable part of the hotel and many commercial venues. It is even part of the finishing touch. It is the place where people have the first impression of this and the hub of the entire place.

In the lobby, in the lobby, the essence of flower art works should be displayed according to the decoration style and color matching to make it the focus of the lobby.Generally, the number of replacements should be considered according to seasonal flower materials, seasons alternate changes, or a ceremony, and the difficulty of subsequent maintenance work must also be considered.

You can use multiple vases. Various vases that are caused by high and low errors are suitable for seasonal flower materials, echoing the season, and perfectly combining flower wares and flower materials.

front desk

Commonly used in the company's front desk, cashier table, etc.A good front desk flower art can highlight strength and taste.This often has higher requirements for the design ability of the flower artist. It depends on whether it can be perfectly integrated with the company's overall style. It can be designed according to the topic of festivals and seasons.

The front desk flower of a company shows the image of a company. The atmosphere of the indoor is set up. Cultural companies should adopt the simple and stable table flowers. Food companies should adopt a natural color system of youthful vitality, while technology companies use some use some use some of them.Modern, simple and atmospheric table flowers.The front desk with flowers on the selection of flower wares can be more exquisite and unique and design, and it is better to use symmetrical flower art works.

Podium

The flower arrangement of the podium is mainly used on the ritual decoration of the ceremonial platform, meeting lectures and other occasions on the stage of the hotel conference stage.The width is almost the same as that of the podium. The height generally does not exceed the speaker's shoulder and neck position to ensure that the image during the speech is not blocked.

The podium flowers are mostly drooping, so linear materials need to be used, such as: Yellow Sword, Brazilian leaf, Wenzhu, broad -leaved martial arts, Tianmen Dong, Yanglan, Phalaenopsis, Wenxinlan, violet, etc.

Business meeting

Commonly used for important occasions such as various business meetings.Good table flowers can express any atmosphere we want to ask for demands. It can be warm, elegant, solemn, and festive.Elegant curve design, the biggest feature of its shape is that it can be appreciated from any angle, and is mostly used for dining tables, coffee tables, and conference tables.

Commonly used flowers include red palm, horseshoe lotus, daffodils, tulips, white palms, sword orchids, loose tail sunflowers, Brazilian leaves, side -by -side leaves, etc.

Funeral flower design

Funeral

In order to express the memory of the deceased and create a sad atmosphere, people often cut the flowers on their chests at the funeral. In the past, they used the small white flowers made of paper. Now they can use flowers to replace paper flowers.The chest flower is generally wearing the left chest, located above the heart.In our country, we are used to wore a male left and female right.The chest flower requires a certain degree of resistance to dehydration, the petals are not easy to fall off, and the shape is neat and simple. Do not adopt plant flower materials such as odor or poisonous juice and pollute the environment.

The chest flower is composed of the main flower, the linseed flower, the lining blades and the decoration.The main flowers are mainly blocking flowers and alien flowers. Choosing buds to be placed are the most suitable. The lining flowers are mainly filled with flowers. The lining leaves are mainly filled with leaves and small leaves.Belt flowers, decorative lace, mesh and other heterogeneous materials.Most of the funeral chest flowers are used in elegant flowers and leaf materials such as white, yellow, and green to set off a solemn and solemn atmosphere.

Wreath

The presence of the wreath was originally a western etiquette. In the end of the Qing Dynasty, China was generally adopted.In the past, the wreath was used in paper flowers, but as people's living standards increased, they began to appear in the form of flowers.flowers and rings are made of flowers and lining. Lily, rose, carnations, pine cypress branches, loose tail sunflowers, Brazilian leaves, etc. are commonly used. They are mostly yellow, white, blue and other tones.People are red (to be consent of the family members).The wreath was originally round, and other shapes were later evolved. The common wreath forms include circular wreaths, heart -shaped wreaths, rectangular wreaths, and cross wreaths.

The funeral basket originated from the celebration flower basket. Later, it was transferred to the funerals presented to relatives and friends, and the role of the wreath is just different.The difference between it and the celebration flower basket is different. Therefore, the flower material is different. It is often used for cold color flower materials, such as elegant pale chrysanthemum, white or yellow rose, white lily, white or yellow carnationLeaves such as Sanjie and Brazilian leaves. In the case of funeral, red flowers can also be used if they are consent.Most of the funeral flower baskets are dominated by single -sided viewing, and the shapes of triangle, fan shapes are mainly changed.There are two common categories: one is the flower basket with a larger body shape in the inauguration; the other is the small flower basket placed in front of Lingtai.

remains

Body flower bundles are generally used.First, when he farewell to the remains, he presented to the deceased to express his admiration and deep memory of the deceased.Second, when the grave was swept up, a bunch of flowers were brought to the grave to show mourning.

Most of the body flower bouquets are dominated by single -sided viewing flowers. The flower materials with Jiaya tone are used with green leaf materials to show the mourning feelings.Such as white lily, white roses, yellow roses, white, yellow chrysanthemums, yellow, white Kang Naixin, horseshoe lotus, forgotten self, loose tail sunflower, lover grass, Brazilian leaves, turtle back bamboo, etc.

The complete bouquet consists of three parts: flower body, decoration, and handle.The flower bodies of conventional packaging are the main body.Show it with obvious flowers group.The handle is the part of the hand holding on the bouquet, and it is also the continuation of the flower body, which is generally longer than 10 cm.In order to coordinate with the flower body or reflect creativity, some bouquets of the bouquet will be appropriately lengthened.The decorative part is supplemented and embellished in the bouquet. It is a bond between the transition between the flower and the handle. The position is generally the binding position of the bouquet.Non -plant materials such as ribbon, mesh, art paper, etc. are commonly used, and it is processed into shapes such as flower node and flower balls to decorate the bouquet.

Gifted car

In the modern funeral, the german car plays the role of honor guards.Those who cannot commemorate the Lingtang will wait for the news on the road sacrifice on the road where the hearse passes.The design of the german car flower art refers to the floral decoration of the appearance of the hearse to express the mourning of the relatives and friends for the deceased.

The decoration of medium -sized vehicle gifted cars is divided into the front of the car, the car shed, the body and the rear of the car. The front of the car, the car shed and the body are generally designed with the method of paving the pavement. You can also remember the texture of the front of the car and the body.EssenceThe flower art technique of the car glory is basically similar to the wedding car. The difference is that the flowers and colors and patterns are different.flowers and leaves are often used in gifted cars include yellow, white chrysanthemum, white lily, yellow, white roses, paradise birds, African chrysanthemums, carnations, stone pine, fishtail sunflowers, and weeds.In addition to inserting flower art works, the hearse also sewn black or white gauze to pin the grief.

Hallway

The hall is the last place of the friends of the deceased and the family who sees the deceased, so it should be used as a focus in design.The design of the flower hall flower art design is divided into the gate of the hall, the lobby of the inner hall of the hall, the relic lining flower, the fascinating flower bed, the coffin pendant flower, the body paving flower, and the ash box flower art.

At the door of the hall, the banner should be hung up high, and the two sides of the gate should be couplet.Under the pillars of the couplet or the pillar, insert a hemispherical pillar with white flowers.There are several flower roads on the stairs on both sides. It extends from the gate of the hall to the sign -in table, and is connected with black or white gauze in the middle.The black banner is hung on the inside of the hall, and the two sides are hung.Both sides should be selected in the design of flower art design.

The internal aisle of the hall can be guided by flower baskets, wreaths, etc.The overall atmosphere of the hall is different from the age, reasons, customs, and beliefs of the deceased.For example, in order to express their youth in order to express their youth in the hearts of another world, they will choose a bright and warm color flower material layout in the hearts of their youth in another world.In the form of a wedding, the couple watched the wedding dresses, holding the flower bouquet, lying in the flowers; such as Western funerals, the church can be held in the church, and the wreath can be made into a cross -shaped shape.

The legacy is decorated with flowers, and the statue is used as a border of flowers, or the L -shaped image can be set.The shape of the flower wall can be Square, circular and other geometric shapes, and can also be shaped by heart shape and pagoda.You can also use flowers around the portrait frame, and choose symmetrically curved moon -shaped flowers on the left and right sides of the photo to decorate.

Inside the hall, the position of the gate is the coffin of the deceased. Generally, the coffin is selected from the surrounding flowers of the flower bed floral design. The coffin can be surrounded by the most flower materials and can look dignified.Gives a feeling of "sleeping" in the flowers.Below the coffin, the side of the door can also be set up, and there are many words in the shape of a heart shape or "laying".

design floral works on the top of the coffin. Common ones are semi -oval and horizontal -shaped works. You can also use cross or flower rings, and use white candles in the middle to highlight the remains of the farewell ceremony.

The cremation of the deceased is often covered with flowers on it, allowing the deceased to lie in the flowers, and the flowers are accompanied by the flowers.Specific methods include laying flowers, a bouquet of flowers, a few bouquets of flowers, sprinkling petals, and blooming flowers.Communist Party members and countries often use the method of covering the party flag, and the party flags do not spread flowers.

In recent years, the floral decoration of the ashes has become more and more important, and the changes in floral art are also rich in color. For example, it is decorated with weaving floral works, or architecture around the ashes altar for flower arrangement decoration. The effect is very good.Essence