The front light of the mirror is the lamp on the dressing mirror, and the light on the bathroom mirror. Generally, it refers to the lighting fixed on the mirror. The role is to clear the mirror, making it easier for people to look at themselves to see themselves.

Because the mirrors of the bathroom cabinet are installed on the wall, the Lights in our room are installed in the middle of the roof.So when we look in the mirror, our back is facing the light, and our face will look very dim, the color is unknown, which has a great impact on our facial cleanser.With the front light of the mirror, our face will be very clear, so when installing the bathroom mirror, you should install the front light of the mirror.

1. How to install the front Lights of the bathroom cabinet mirror?

The installation height of the front lamp

When decorating a house, you should first consider the approximate location of the bathroom cabinet and mirror, so that we can be sure of the approximate position we reserved, so what is the height?Under normal circumstances, if you install the bathroom cabinet, then the mirrors are on the bathroom cabinet, so the highest position of the mirror is between 1.7 meters and 1.8 meters.Do not exceed 1.8 meters when the front light line.People often put the reserved line at 2 meters. The mirror cannot be closed, which will affect the overall beauty of our room.

precautions for installation of bathroom cabinet mirror

1. Observe that the aluminum part of the front light Tube of the bathroom cabinet mirror has a label one end and defaults to the positive extreme. If the lamp Tube is installed, the power is not bright. Please change the ends of the T5 lamp Tube.If you still do not lighten up, please return.

2. Be sure to distinguish the input and output end of the front light of the bathroom cabinet mirror.

3. bathroom cabinet mirror front lights should pay attention to the waterproof and riot effects when installation. Under the conditions of high temperature and humidity, it should still maintain a high usage rate. At the same timeThe noodle wash basin or toilet should be carefully checked at the same time.

4. When the output line of the welded power supply, you must clear the input cable and the input cable of the switch on both ends of the front lamp rack at the front lamp rack of the bathroom cabinet.

5. Do not use the power to install the front Lights of the bathroom cabinet mirror.

Second, which is the best front light

Depending on the installation location, it can be divided into; the front light of the handwashing, the front light of the bathroom mirror, the front light of the bathroom mirror, etc.

Pay attention to the consistent style in the selection of the front Lights of the mirror.The color, shape, and style of the front lamp must be commensurate with the style of indoor decoration and furniture and echo each other.Selecting the front light of the mirror mainly depends on its light effect, that is, the effect of light reflection after lighting.The front Lights of the mirror should be integrated with the overall style of the bathroom, either quaint, or new rhyme, nostalgic, or avant -garde, or romantic romance, which can be reflected through light and shadow to enjoy the beauty of the Lights.

The color matching of the front lamp

For the lighting of the front of the dressing mirror, the color can be matched according to the style of the bedroom, which is more likely.The front lamp used in the bathroom is generally used with anti -fog mirror front lights.Then the light of the front light of the anti -fog mirror is mostly white or yellow.White belongs to the versatile color. It is most classic with black. It can also be paired with other colors to create different fashion color space.Yellow and elegant, with other bathroom products with the same color system, such as brown bathroom cabinets, pale yellow marble table pots, etc., create an elegant bathroom space.

The space of the front light of the mirror

In addition to its basic local lighting functions and safe use functions, it can also give the entire room's furniture color, matching, and structure matching to play a finishing touch.Either quaint, or new rhyme, nostalgia, avant -garde, rural style, or urban romance.Then each Mirror front light, whether the light is turned off or bright, is a artwork.

Third, the cleaning of the front lamp

1. It is best not to clean it with water. Just wipe it with a dry cloth. If you accidentally touch the water, dry it as much as possible. Do not wipe it with a wet wipe with a wet cloth immediately after the light is turned on.

2. In terms of cleaning, the lampshade of the cloth cannot be flushed. It can be used in a dry cleaner. If it is made of glass, it can be washed with water. Just wipe the skeleton of the lamp.

3. cleaning the front light of the mirror with vinegar is a good way.Pour the amount of the beer bottle cap in the half pot of water. After mixing it, soak the rag in the vinegar water, and the rag that is twisted to wipe the dust on the lamp.Because vinegar has the effect of cleaning and preventing static electricity, the lamps wiped with vinegar are not only bright but not easy to dip the dust.

4. When cleaning the light body, wipe it gently with a soft dry cotton cloth. The movement should be kept from top to bottom. Do not rub it back and forth.When cleaning the lampshade, it is advisable to use clean chicken feathers to prevent the lamp cover or deformation.

[Umbrella Bone] What can I repair the umbrella Bone?

What material is good for the umbrella Bone

With the development of technology.The umbrella has also changed. From the previous oil paper umbrellas to the umbrellas that are now many.With the changes in the umbrella surface, the umbrella Bone has also changed. Most of the previous umbrella bones were wood and bamboo umbrella bones. Later, iron bones, steel bones, aluminum alloy bones (also known as fiber Bone), electric Bone and resinbone.

1 Advantages of aluminum Bone:Light weight and cheap price.

2 The advantages of chemical fiber Bone:Light weight and strong wind resistance.

3 Advantages of carbon fiber Bone:Light weight.Disadvantages: Wind resistance is average, and the price is the most expensive among all materials.

4 Advantage of wood Bone:Traditional Chinese umbrellas are often used.

5 The advantage of iron Bone:Strong and durable, the price is slightly more expensive than aluminum Bone.

How to repair the umbrella Bone

The place where the dark umbrella is easy to break is a small hat on the side. Those small hats are facing the steel skeleton on the inside, because the wind blows the skeleton folding and the hat eyes are loose.In this case, the solution is to find a little thin fabric or plastic, and tighten the hat eye and steel strip together tightly.In this way, umbrellas can be continued.

The skeleton steel bar of the Yulu umbrella is broken. This is also a common situation. When this happens, there will be one or multiple faces when the umbrella is opened.In this case, the solution is to find a pliers. It is best to use a pointed clamping and it will be more convenient, as well as iron wire.Observe carefully and find the iron hat that connects the disadvantages of the connection and replace it with a wire.Tighten it with pliers, and note that the head of the iron wire is screwed with an umbrella to scrape the umbrella surface.

There is also a situation that the position of the contraction card of the Umbrella is broken.After the umbrella is opened, I can't hold it automatically.You can't always push an umbrella with your hands!In this case, it is generally necessary to use a knife such as a fruit knife.The card position when it is opened is flattened, because the total use, as well as the damage of the wind, make the card position uneven and round, and the card can't hold the umbrella.Use a knife to flatten the plastic card position to solve it.The general problems with these methods can be solved.

In addition to the above situations that need to be repaired, the Yellow Umbrella needs to be maintained: the winding wire bending of the umbrella Bone is easy to cause the wire Bone, which can directly pull the iron wire with the hand to avoid the rivet falling off or the umbrella cloth pierced; in the umbrella in the umbrella;The handle is rusty, which is easy to cause the opening and closing. Use a small screw or the toothpick to dip the lubricant to drop the middle handle joint, and then open it several times.The structure is so simple.No matter how big the problem is, there is no need to repair it again.

I believe that after watching the common faults and maintenance of the Yulu umbrella, you can get some maintenance tips.Umbrellas can not only shade the rain, but also shrink and easy to carry.For students, it is the most reliable to prepare an umbrella in a schoolbag.However, after using the umbrella on a rainy day, be sure to remember to dry it before receiving it. In this way, the umbrella handle of the umbrella will not be so easy to rust.Essence

1. The breeding method and precautions of the yew

1. Soil

Equipment breeding should be loose, rich in humus, water preservation, Fertilizer, and breathable soil.You can choose a mixed matrix with grasses, perlite, etc. with loam soil.Due to the obtnerality of the clay, the sand preservation and the poor water preservation are not suitable for use.In addition, yew cultivation should be fertilized in time. It is better to apply Organic fertilizer and 0.02 catties of Compound fertilizer per plant at a time. It can also add farmhouse Fertilizer and cake Fertilizer (such as cottonseed cakes, Peanut cakes, hemp cakes).

2. Fertilization

Fertilization should be sprinkled along the wall of the pot, and it cannot be close to the root of the red Beans.Generally, there are nutrient soil in the bonsai of the newly bought red Beans. There is no need to fertilize in the beginning of 3 months. It can be applied for 2 to 3 months.

3. Light

Equita likes a cool growth environment, so in the process of breeding, it should be appropriately shaped, and it should not be placed in a place with direct sunlight. This will quickly evaporate the moisture of the red Beans, leading to dehydration of branches and leaves, and dry leaves.In the summer season, the red soy sauce can be placed in the living room, balcony, corner and other places during the day; until the evening, it will be placed in the window sill.At the same time, without light, it will affect the growth of yew, so under the climate of not strong sunlight, it should be appropriately accepted by sunlight.

4. Watering

Normal yew leaves are tall and bright. When the leaf surface is found, it should be watered. If the leaves are drooping, it indicates that the water dehydration is serious.Generally, the yew placed outdoors is watered once every 15-20 days, and water is poured once every 20-25 days in the room. It is best to keep the water content of the soil about 40%.During different periods, the moisture required by plants is also different. In the growth period (March to November), there are more moisture, and the water ratio required for dormancy (December to February) is less.That is, spring and autumn are usually poured once every 5 to 7 days, poured once every 3-5 days in summer, and poured water permeable once every 7 to 10 days in winter.

5. Prevention and treatment of pests and insect pests

Under normal circumstances, there are very few insect pests breeding.If you are found to be yellow or diseased and insect pests, you can use methyltotobetin and potassium dihydrogen phosphate for pouring or spraying.

6. precautions for growth environment

The Flower pots that cultivate red soy sauce should be slightly larger, and a few holes can be used in the lower part of the pot to enhance the water seepage and breathability of the Flower pot.

Relatively speaking, yew will cause root rot, stem rot, and rotten roots during the rainy season, especially young trees.In the high temperature and arid season, yew is prone to leaves and redness, which can be controlled by spraying Schpo Dye Dye.

2. Method of Red Bean bonsai Pruning

1.

After the reddock bonsai is planted, many new buds will grow.Therefore, at this time, some buds should be appropriately erased to effectively prevent nutrient consumption too much. In this way, the bud can make the red bean bonsai grow better.

2. Topping

Red bean bonsai has unbalanced growth, strong and weak.Due to various reasons, double -heads and bulls can be used to suppress its growth points to suppress its growth in order to achieve the purpose of balanced branches.

3. Short interception

The short -cut is to intercept the one -year -old branches. The short -cutting is light, short, medium, heavy short, and extremely short.You can choose according to different situations when trimming.

4, sparse branches

Sparse branches are cut from the base of the branches or branches. The role is to increase the growth of the left branches, the nutritional area expands, and achieve the purpose of growth and development.There are fewer branches behind the sparse branches, which is conducive to flowering and fruiting.

5. Pulling branches

Pulling branches is to use the method of pulling the led to change the original direction and location of the branches or branches, and continue to grow.Pulling the red bean bonsai branches around the surroundings, the main branch angle is better at 70 degrees.This is conducive to the space occupied by the dry sturgeon, slowing the growth rate of the tree.

6. Carving injury

The carving is to remove some bark or wooden parts with a knife on the branches or branches, affecting the growth of branches or branches.The engraving is mainly on the lack of branches, so that nutrition accumulates on the buds and promote the growth of new branches.

Third, the principle of trimming of red Beans and sanctuary bonsai

1. Pruning red Beans and suctions can be divided into trimming and dormant trimming; it can also be judged according to its waiting, injury, cold, frozen damage, etc.

2. Keep the plants keep a well -proportioned and beautiful tree; improve the ventilation environment and reduce diseases and insect pests.

1. The method of breeding in North America

1. North American winter green has a strong ability to adapt to the soil. If it is planted outdoors, it can be planted directly on the ground.If it is planted in a Flower pot, you need to pay more attention to it.We can mix with humus, peat soil, and loess, so that North American winter greens can grow better.

2. The more sufficient sunshine, the better the winter youth in North America.When we plant it, we must also pay attention not to plant North American winter youths where we can't see the sun.

3. North American winter green is not afraid of cold. Even in the Outdoor environment of the northern winter, you can survive, so you don't have to worry about frozing it to death at all.

4. North America's winter green is very afraid of drought. Speaking of this, it should be the only thing to pay attention to in North American winter green.We want to ensure that the soil in the Flower pot is always wet.

5. The growth of flowers is inseparable from fertilization, and the same is true of winter green in North America. North American winter greens have to apply Fertilizer once every quarter, so that they will grow better.

6. The branches of North American winter green need to be repaired regularly.Trim the excess branches so that more flowers will be bloomed and more fruits will be made.Too many branches will affect the absorption of nutrients for flowers.

Second, North American winter green maintenance method

1. Treatment of branches: The cutting branches of North American winter greens need to be inserted in water. The bottom of the branches need to be cut obliquely to increase the water absorption area, and then insert it into a vase of about 20 cm deep in water.

2. Regular water change: Generally, change the water once a week to keep the water clean and extend the viewing period. Usually, fruit can be hung for 1-2 months.

3. Avoid strong light: North American winter green cannot be placed in a strong position, try to keep in the soft living room, bedroom, etc. as much as possible.

3. How to maintain North America winter in winter

In winter, the North American winter Youth will enter a dormant state, and the demand for water will not be too large; no strong light is required, regardless of the light and weakness, it will not affect its growth; you can also do not fertilize.

[Ivory bracelet] How to identify ivory bracelets and how to maintain

How to identify ivory bracelets

1 As well asLook at the weight

The same size jewelry, the weight of the ivory is obviously heavier than the Bone -made of the Bone, and the artificial ivory bracelet jewelry.

2 As well asBone

The texture of the ivory is delicate, and there are small ripples on the top. In contrast, the production texture of Bone products is relatively rough, and the texture on the top is also thick. The artificial ivory pattern is not easy to see.

3 As well asGloss

The ivory bracelet is oily and bright, and the Bone jewelry is dry. Although the luster of the artificial ivory bracelet is better than the Bone products, it is still not as moist than ivory products.

4 As well ascolor

Ivory bracelets are often white, while Bone carvings are mostly bleached. Some ivory bracelets are bleached, giving people an oily and white feeling, and Bone carvings are dry after bleaching.

5 As well asDepend on workmanship

Ivory bracelets are well -made, while the workmanship of Bone carvings is relatively rough, while artificial ivory bracelets often leave mold marks.

The difference between ivory and fake ivory for ivory and chemical materials: ivory has tooth patterns and shapes are vertical and horizontal The human shape, and the teeth are thick and thin; chemical fakes have no tooth patterns, and some have patterns. And the thickness is consistent.Ivish products are heavy, white, and full of heart; chemicals are light, yellowish, and no heart.

How to maintain ivory bracelets

1. Do not let the ivory stick to the kind of irritating liquid like washing spirit. The surface of the surface will become dark and dark. It is normal to slowly yellow the color and slowly yellow.

2. If there is no way to stop the decoration, because human sweat will make it yellow. If it is a decoration, you can find a way to block it from the air, such as covering it with a glass cover, and put some water to increase the humidity to increase the humidity.Prevent cracking.Ivory is a coquettish thing, please take good care of it.

3. Ivory is not recommended to maintain oil. If you are dirty, you can use a toothbrush to clean the toothpaste, but the time cannot be too long, otherwise it is easy to crack.

4, Ivory bracelets are sensitive to temperature and humidity, please pay attention to moisturizing.50% The above humidity is enough. If the bracelet is often played, it doesn't matter because it is often worn on the hand!If you need to use a lubrication when you wear a bracelet, do not use soap or hand -washing fluid, just use a thin plastic bag to help it, so as to avoid damage to the dental quality.

5. Ivory bracelets are usually removed with dust, which can be removed directly with a toothbrush. However, if it is stained with oil stains or refractory dirt, it is necessary to wipe it with a towel dipped in the soap water.If you really can't go away, you can find a professional!I suggest you buy it directly to find the seller.

6. Ivory bracelets are particularly sensitive to changes in humidity. Because they not only contain a certain amount of water, they also have a very water absorption.It will crack or deform due to excessive shrinkage.Therefore, if you do nt wear it for a long time, the simplest method is to wrap it with plastic wrap and seal it with a closed bag.

7. As long as you pay more attention to the details of life, the maintenance of ivory bracelets is not difficult. There is a good habit, that is, the best gift for you to give you, like a tooth, start with good habits!