Sys_Grace's Articles

1. A few shots of Shading nets are best

For the greenhouses that plant vegetables, not only should it be clever in summer, but also shade and cover the shade net.The shade net is divided into two, three stitches, four stitches, six needles and other species according to the fine degree of density or light transmission.The Shading net is too sparse, the Shading rate is not high, and the cooling effect is poor.The Shading net is too dense, the light is too small, and the vegetables are easy to grow.

After a summer practice, the greenhouse Shading net generally uses a three -needle Shading net, and two -needle Shading nets can also be used.Essence

At the same time, when the temperature is high in summer, the cooling effect can be enhanced by covering two layers of sunshade nets. The first layer is fixed, relatively sparse, and can be used with two stitches.The other layer is activity. You can use three stitches to open it when you need it, and put it away when you do not need it.Generally, the temperature of the temperature will be on the event at 10 am to 11 am, and the Shading net on the activity will be opened. When the temperature starts from 3 to 4 pm, it will be put away when the temperature starts to steadily decrease. This can control the temperature to a certain extent.Not long.

Second, the more the number of ungathetic net needles, the better, the better

How many pins of the Shading net represent the number of pins in each inch. The more the number of stitches represents the densely the eyes, the better the Shading effect, but the too large number of needles will also cause the shade net to be too heavy, which is not conducive to ventilation and breathable.Therefore, the number of needles for the choice of Shading nets needs to be determined according to the actual usage and needs.To achieve a good Shading effect, it will not affect the circulation of indoor air.

The main function of the Shading net is to block the sun and prevent plants from being sunburned or sunburned.If you want plants to better photosynthesis, you can choose a low -number of pins (such as 3 stitches or 4 stitches) may be more suitable.If you want to sunscreen better, you can choose a high -number of pins (such as 6 or 8 stitches).

1. What hat is a big hat

The big -edge hat, also known as the large brim hat, is a very large sunshade hat with a large brim. Using a wide brim can play a better sunshade and sunscreen effect, and with the development of fashion, the large brim hat has gradually added more.Fashion elements, such as lace, streaming, rivets, etc., are favored by love women in the summer. Many young ladies who pursue fashion and advocate trendy will prepare a few large -edge hats with different styles.

2. How to match the clothes with big brima hats

As a relatively large hat, large brim hat should pay attention to clothing matching. It is usually equipped with skirts or loose clothes. This can better reflect the sense of layering. In additionStyle clothes, the following introduces the classic matching of several large brimmed hats:

1. Sky blue big sun hat white top

The faint blue sun hat makes people feel fresh and pleasant, full of sweetness, with a pure white top, it looks light and playful, which is very suitable for fresh summer.

2. denim big brimmy jumpsuit

The large edge of the sun hat made of denim is full of personality. The unique material shows a different fashion taste. With black jumpsuits, it is full of fashion.

3. flowers along the hat, dress

The pink big brim hat girl is full of breath, and the flower side of the hat side makes the sweetness go further. With a fancy dress, it is full of fairy.

4. Camel big brim hat suspender dress

The large -edged hat of the camel is popular and versatile, with a stitching style suspender dress, the plain color and the classic wave dot element stitching, creating a high -waist visual effect, extending the lines of the legs, which is very high and thin.It is elegant and soft with a pink coat.

3. What hairstyle is suitable

Big brim hat can not only shade, but also full of fashion atmosphere. It can be matched with a variety of styles. In order to make the large brim hat look better, you need to pay attention to the matching of the distribution. The hairstyle suitable for the large brim hat is mainly:

1. Simple long hair is very suitable for large brim hats. It can show the advantages of soft hair and smoothness, and highlights the innocent and lovely temperament.

2. The hats with a slightly wider eaves can also modify the face shape. With fluffy hair or curly hair, it can create sexy and look younger.

3. Subtract the hair and use a wide plate comb to scrape the hair from bottom to top to create a fluffy sense of weight. The tied braids will not be too rigid.

4. All hair is gathered to the side, and a three -stranded braid with a loose and pine. People with higher hair Levels can get the hair wax and let the pierced hair be put into the braid.

5. After the U -shaped pinching the end of the hair, twist the two ends of the U -shaped clip to fix it, and create an unintentional ending. It will fix the hair tightly into a small bundle of the hair than the rubber band.

6. Pull the braids from top to bottom to create a sense of easy and relaxed. The overall braid is uniformly consistent to look good; in order to match the loose braids, the arc should be pulled out on both sides of the hair.Rubbing the hair feeling, fix it with a setal solution.

7. Put the big brim hat on the head directly, adjust the brim to the rolling wave -like, and the waves on both sides should not be symmetrical, so it will not be too rigid.

1. Electric Barbecue oven indicator is not on

maintenance method:

1As well asPower plugs are not in contact with sockets, and plugs and sockets should be replaced or repaired.

2As well asThe power cord core is broken and the power cord can be replaced.

3As well asThe thermostat contact is burned, repaired or replaced with the thermostat.

4As well asPoor contact head in the timer, repair or replace the contact.

Second, the electric Barbecue oven is not hot

maintenance method:

1As well asConfirm whether the indoor power supply is out of power.

2As well asCheck whether the power cord of the electric barbecue stove is disconnected, and whether the power plug and the podium are poor.Find out the disconnect and pick it up again, and wrap it in the insulating gel cloth.If the plug and socket are damaged, it will be replaced.

3As well asCheck whether the heating device is loose, and whether the heat of the heating device and the socket is good.Poor contact, recreate.If damage is severely replaced.

4As well asThe electric wire is burned.Replace new products with the same specifications.

5As well asThe switch touch of the switch, the temperature regulator, and the timer loses elasticity;;The contacts are severely abstructed or poorly exposed.Find damaged parts to repair or replace new products with the same specifications.

Third, the temperature controller of the electric Barbecue oven fails

maintenance method:

1As well asThe thermostat tactile loses elastic or contact bonding.Replace the losing elastic tactile or use a fine sand cloth to repair the contact.

2As well asThe rotating thread Sleeve is rotated with the rotor, and the position of the fixed touch cannot be adjusted.Fixed thread cover.

3As well asThe porcelain beads on the dual metal tablets are damaged or falling off, causing the dual metal sheet to reach the tactile tactile.Replace porcelain beads or tight porcelain beads.

4As well asDouble metal pieces are damaged.Replace new products with the same specifications.

Fourth, electric barbecue furnace time switchdamagebad

maintenance method:

1As well asDelivery or bonding.Use fine sandpaper to be carefully polished and Smooth.

2As well asThe springs are weak and replaced.

3As well aswatch spring or gear damage and replace the damaged parts.

5. The electric barbecue stove door is stuck or closed

maintenance method:

The stuff of stuck in the furnace door is that the door bead protruding too many spring boxes, the stuck cannot be shrunk, and the door bead is adjusted again.

The main point is that the spring is weak, loses elasticity, and replaces new springs.

6. Electric barbecue furnace door glass damage

maintenance method:

The main reason for this kind of failure is that the pressure screw is pressed too tightly, or the glass door is drenched by cold water during high temperature baking.

Use heat -resistant glass to replace according to the original specifications, and avoid the above conditions when used.

7. Electric Barbecue oven leakage electricity

maintenance method:

1As well asThe sealing and insulation material of the heater to withstand the high temperature and reduce the insulation performance and cause the leakage, re -sealing.

2As well asThe heater socket has electrical dirt to reduce its insulation performance, and wipe the electrical dirt with a dry cloth.

3As well asConvert switches, insulation switches or timing switches to reduce the insulation performance, and perform dry treatment.

4As well asElectric deep lines or plug insulation layers are damaged and replace new products.

5As well asThe wiring head was loosened and touched with the shell, and the loosening head was picked up.

[What are the effects of far -infrared knees] The working principle of far -infrared knee pads is used

What is the effect of far -infrared knees

Far infrared knees are one of the far -infrared protectives series. After nearly a hundred materials improved, the bamboo charcoal fiber and protective gear embroidered needle were successfully woven, and it was first upgraded from sports protection function to dual effects of health and sports protection.It has a fixed and protective effect on joints and muscles. At the same time, it can effectively reduce pain and achieve the purpose of anti -inflammatory and swelling.

Far infrared knees introduce German technology, micro -powdery treatment, and add BCP ingredients to produce a thermal effect ring of about 2cm, which is comparable to 2cm thick wool;, long -lasting effect, has the dual effects of external treatment, which not only protects the knee joint movement without friction and collision, but also against the invasion of cold air. At the same timeStrengthen metabolism; promote and improve blood circulation, can increase body temperature by 3-4 C; play a role in alleviating analgesic, anti -inflammatory, and swelling.At the same time, its meticulous weaving also offset the invasion of the thief wind and reduce the loss of loss of body temperature.This will improve the microcirculation of knees and legs, relieve pain, swelling inflammation, promote fracture healing, and improve knee joint power.

The working principle of far infrared knees

Far infrared knees are first through the human body's own energy to stimulate the bamboo charcoal inside the protective gear far -infrared ions, thereby generating a two -centimeter thick thermal effect ring. Through the Skin, the surface cells and deep acupuncture nerves close to the Skin are fully stimulated.Deeply stimulate the guardian of the guards in the area, accelerate blood flow, promote blood circulation, improve tissue nutrition, thereby achieve the effect of acting qi and promoting blood and strong physique.

What are the benefits of far infrared on the body

1. Make moisture activity and improve the oxygen content of the body

About 70%of the human body is moisture, and the blood ratio of blood is as high as 80%.If the blood gas is insufficient, the water molecules in the blood gathered into inert water (that is, the combination of four hydrogen molecules and a oxygen molecule), and cannot pass the cell membrane.Far -infrared rays can resonate water molecules, become independent aquatic molecules, improve the body's oxygen content, cells can restore vitality, more vigorous spirit, and more flexible mind, which can improve disease resistance and delay aging.

2. Improve the microcirculation system

Independent aquatic molecules can freely enter and exit cells, and then transform into heat energy through resonance and resonance, which increases the deep temperature of the subcutaneous deeper, accelerates blood flow, and the microfiler vascular expansion.Decreasing, the function of microfilar blood vessels is to supply oxygen and nutrition to the human body 60 mega cells, and at the same time excrete the waste produced by metabolism.If the microcirculation system occurs, it will lead to a variety of problems, including hypertension, cardiovascular disease, tumor, arthritis, and cold limbs.The total length of adult microcosis can surround the earth for three weeks and is called the second heart of the human body. It can be seen that it is important.

3. Promote metabolism

If the microcirculation system is improved, the waste produced by metabolism can quickly discharge the in vitro and reduce the negative boldness of the liver and kidneys.These wastes include heavy metals that cause cancer; fatigue and aging lactic acid, free fatty acids and subcutaneous fat; uranium ions that cause hypertension, and uric acid that cause pain.

4. Balance the body of the body

Far infrared rays can purify blood, improve Skin quality, and prevent Bone joint pain caused by high uric acid.

What is polarizing mirror

The word "polarizing light" comes from physics. The reflection on the non -metal surface of glass and water surface is polarized light, and the clear blue sky is also polarized in the scattered light in the direction of 90 with the sun.These Lights need to be avoided, eliminating polarizing light, which can make the color of the sky deeper and effectively reduce the impact of glare on photos.The polarizing mirror uses the grating principle to eliminate polarized light at a certain angle.Here you need to pay attention to the angle of shooting. When the backlight or Smooth light shooting, the role of polarizing mirror is limited, and it must be a certain angle with the light source and reflector.

What is the role of polarizing mirror

The photos can look more transparent and the color is brighter.It can also be darkened in the sky, eliminate reflection, and it is very useful when shooting water flow and glass.Polarized mirror can also play a role in blocking light, which can reduce the shutter speed.To understand the use of polarizers, you need to master certain theoretical knowledge.

When shooting the scenery, the polarizing mirror is very useful, especially when the sky is dark, it can make the color of the blue sky more saturated, while highlighting the clouds in the sky.However, the material must be reversed. Do not use polarizing mirrors too much, such as the reflection of the leaves and grass is also polarizing light. These reflectives are conducive to expressing details and layers. If these Lights are eliminated, the screen will be overwhelmed and there is no level.

The greater use of polarizing mirrors is to eliminate reflection, such as the reflection of the water surface and glass window.In this way, you can shoot more details, such as things in the window, or rocks and water plants in the water.And polarizing mirrors can reduce the amount of light in the lens, slow down the shutter speed, and play the effect of similar to the medium -density mirror.

Polaries are divided into two types: linear polarizing mirror (LPL) and circular polarizing mirror (CPL). The former is mainly used for old -fashioned manual cameras because it interferes with automatic exposure and camera light metering system.Most of the polarizing mirrors on the market are CPL. When buying, choose a ultra -thin Polarized mirror when using a wide -angle lens to shoot according to your own lens caliber, so as not to occur to avoid dark corners.

When shooting the scenery, learning and using a circular polarizing mirror will have an immediate effect, making your photos refreshing.

How to use Polarized mirror

1. The brightness of the dark sky

By rotating the lens, the many partial vibrations in the roof reflection can weaken the intensity of light in the sky, darke the sky, and increase the contrast between the blue sky and the white clouds, making the sky blue and the clouds whiter.It should be noted that the CPL mirror does not affect the color of the light.

2. Eliminate the reflection on the surface of water, glass and metal

When the light is projected to the plane objects, such as water, glass, paint furniture, etc., it usually produces a strong SLR reflex light, which will become a high light point in the photography screen.This highlight point will affect the shooting effect. At this time, if you use the CPL mirror for shooting, you can improve the picture quality of the photo and improve the clarity of the picture.With the CPL, the previous reflective water surface does not affect your shooting. You can take more clearly to the fish in the water; add CPL, the previous reflective glass window will not affect your shooting. You can shoot more clearly.The exhibits furnished in the glass window; add CPL, the previous reflective window will not affect your shooting. You can shoot the charming scenery outside the car window from the car.

3. Replacement neutral gray filter

CPL mirrors can reduce exposure 1-2 gears, which can replace the role of medium gray mirror.Under certain needs, 1 or 2nd exposure can be reduced.

Many photography enthusiasts know that using polarizers can make the blue sky blue and eliminate reflection on the surface of glass, water and metal, but in fact, the polarizing mirror has more effects.When shooting in cloudy weather, polarizers also have obvious effects.Although it does not turn the gray sky at this time, it can make the color stronger by removing the reflection on the surface.For example, shooting the leaves of plants, the surface of the glass and the slippery stones of the plant in cloudy weather will reflect some light from the gray sky.These reflection obviously fade the color.Add a Polarized mirror in front of the camera. Slowly turning the front lens, you will find that the leaves of the plant have thickened the leaf surface.installation and non -mirroring are shot the same scene, you will find a very obvious difference in the photos you shoot.In cloudy weather, the effect of increased color saturation through polarizing mirrors is as obvious as eliminating reflection.

When using a polarizer, just set it in front of your lens, watch the front lens of the Polarized mirror at the same time through the viewfinder, until the result of satisfactory, then you can press the shutter to focus and adjust the layout of the screen.Press the shutter.

However, some photographers who use polarized mirrors for the first time said that they could not observe any changes when rotating polarizers. This is because the polarization mirror has the best effect when the light is in the direction of the light and the axis of the lens is 90 degrees.If you shoot against the sun, or face the light source (sunset), the Polarized mirror will not have any effect.But if the light comes from your left or right, or directly from the top of the head (the sunlight at noon, cloudy weather), the Polarized mirror will magically eliminate the reflex, the dark blue sky and improve the color saturation.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;