1. What are the benefits of electric scissors to pruning fruit trees

Electric branches and scissors are a kind of efficient, ecological, safe electric branches and scissors. They can cut fruit branches such as apple branches, grape branches, mulberry branches.Good helper for production.The advantages of electric scissors are mainly:

1. More efficiency

Electric scissors are powered by electricity. Its pruning efficiency is 2 to 3 times that of traditional hand -cutting efficiency, and electric scissors can also be trimmed in both directions. It is more suitable for trimming or shape than ordinary scissors.And in the past, it was unbearable to use manual scissors to trim fruit branches for a long time and arms, while electric scissors would not have this situation.

2. Good durability

The supporting structure of the electric scissors is simple, the operation is stable, the failure rate is low, the blade cutting capacity and life are high, and it can be used for a long time under normal use and regular adjustment.

3. High pruning quality

The performance of electric scissors is stable, and the quality can meet the requirements of Gardening. Under the correct operation, the flatness of the fluff surface is better than manual trimming, and there is basically no leakage.Compared with manual scissors, the fruit branches that are trimmed by electric scissors are closer to the natural growth state. The canned crown surface is larger. The trimmed surface is neat and beautiful, and the buds and leaves are sprouting and sprouting.

4. Good safety protection

Electric scissors have a good safety protection function. The blade follows the wrench. When the stuck is stuck, the circuit self -inspection process will start motor monitoring, and protect the motor without burning.The protection function of both sides of the motor (DC -free motor) is controlled by Hall chip switch.Rewarding the trigger position will open the cuttings and then close.The stress of the battery over loading is overheated and over -discharged and the discharge will be maintained by the protection of the circuit board.

2. What should be paid attention to when the use of electric pruning is trimming

With the development of technology, electric pruning has become an indispensable Tool for garden operations. Electric branches and scissors are not only more laborious when the method is wrong, but also may affect the service life of electric pruning.Pay attention to some matters:

1. When using electric pruning trimming and accessories, we must comply with the instructions and use methods of use. At the same time, the working environment and the work they want to complete should be considered. The use of electric pruning and trimming as a operation that does not meet the requirements may cause danger.

2. Electric pruning pruning requires professional training to use, so that the unfamiliar electric pruning trim or those who do not understand the use instructions are very dangerous to use without training.

3. Do not cut the branches of the working range of the scissors. Do not cut too hard things such as metal, stone and other non -plant materials. Do not clamp the Tool with tiger clamps. If scissors are worn or damaged, please replace the scissors.

4. Electric branches should be kept clean before and after use. After use, use clean cloth to clean electric branches, batteries and chargers, and use soft brushes or dry cloths to clean the dust on the scissors head. Do not use it. Do not use it.Any corrosive or solvents cleaner.

5. Use the equipment correctly according to the instructions of the use. Do not use electric branches, batteries, and chargers. Do not use electric branches, batteries, and chargers in any liquid.

6. Make sure that the switch is closed when adjusting, replacing attachments or storing electric branches, and avoids the risk of electric branches and cutting unexpectedly.

7. The idle electric pruning is trimmed in the blade closure and stored outside the child.

8. After use, the dirt should be removed first, and then the dirt should be removed first, and then the lubricating oil or oil is lubricated on the contact part, so that the blade is in a normal maintenance state. This can reduce the resistance and extend the life of the blade.

1. ski glovesWhat are the materials

The whole process of double -board skiing depends on the Ski rod to exercise in the ski resort. Due to the specific use of ski gloves, it is necessary to require corresponding functions. Therefore, the requirements of the gloves are very high., Anti -cutting.Let me briefly introduce the common materials of ski gloves:

Main fabric materials: high -density spring Asian spinning, Oxford cloth, nylon grid cloth, horizontal toweron.

Main materials: high -grade PU, elastic towel cloth non -slip, anti -sliding Skin.

Main materials: soft, velvet.

2. How to buy Ski sports gloves

1. Fabric quality

The quality of the fabric is the most important. It is necessary to have a certain ability to resist, cutting, and tear -resistant scratching. Ski wrestling and bumps are inevitable. If the fabric is not harmonious, it is easy to be damaged, and your hands are easily injured.At present, the more professional ski gloves even use the Cafera material made of bullet -proof jackets on the main protection parts, which are very strong and safe.

2, non -stick snow

What is the method of ski gloves?The waterproofness of ski gloves is similar, and the waterproof performance of single -board gloves is higher.The waterproofing of gloves with leather, chemical fiber or rubber materials in appearance is already very good. Materials such as cotton, wool, velvet and other materials are easy to stick to snow, which will make the gloves quickly humid and cold, and will cause finger frostbite.Black glove skiing, even not as good as bare hands.

3. Keep heating and breathable

Keeping warmth is the basic requirement, and gloves are also very important. Let the sweat from the heat volatilized in time to avoid the cold feeling when the humidity and the amount of exercise decreased, and the impermeable gloves are often easy to taste in sweat gloves.

4, to divide the finger

The size of the size should be appropriate, thin and suitable.It is necessary to ensure flexibility of the fingers, so that in the ski resort, it is easy to pull the zipper in the ski resort, take things, adjust the snow boots, snowboards, and upper and lower cable cars.Some double -board gloves are also naturally bent in fingers, wearing more natural and comfortable.Single -board gloves have longer wrists, and often the snow surface is not easy to get into the snow.

5. Anti -slip

In order to ensure that wearing gloves can be gripped firmly and reliable, and it is convenient to grab snow sticks, snowboards, drags, cable cars, etc. The palms of the fingers must be non -slip.The primary gloves can be bought in dozens of yuan in the wholesale market, which is cheap.More professional high -end products with snowproof, high sweat -proof and breathable, and gloves with snow mirror brushes and mirror fleece are recommended. It is recommended to choose a specialty store. It is more professional and complete.Yuan is not waiting.

Is basketball goggles useful?

Facing some basketball enthusiasts, it is often caused by Dai Optical glasses to play basketball.basketball goggles can prevent the eyes from being impacted or pierced during exercise, and can also be equipped with a degree of basketball glasses for myopia.basketball frames are generally different from ordinary glasses.For example, materials must have a super -strong impact function, and it is best to use PC and polypropropylite, etc. with good toughness; the color should not be too bright, otherwise it will affect the vision, especially in the exercise with higher reaction requirements.It is easy to cause mischief; the other most important is safety. The frame must have functions such as corrosion resistance, anti -falls, difficulty aging, and parts of parts.

How to match basketball goggles

1. Number of decreases: decreased by 25 degrees below 500 degrees, and decreased by 50 degrees greater than 500 degrees.However, there are some high degrees that need to be reduced by more than 100 degrees to adapt, but some people do not need to reduce it. This varies from person to person.

2. The pupil distance is suitable: the frame and the eyes should be controlled within 10mm. For example, your pupil distance is 65mm, so it is best to choose a mirror-frame pupil distance of 62-72mm.

3. Frame selection: Be sure to pay attention to the degree of curve.

4. Anti -fog problem: It is almost impossible to buy an anti -fog agent, because myopia lenses are almost impossible.If there is no anti -fog agent, when you run in winter, there is a white, very sad.

5. After -sales problems: Although the glasses are not expensive, but there are problems, there is still a special after -sales after -sales.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

How to choose Sunglasses

1. Whether there is a polarized effect

The effect of polarizing can help us well distinguish between reflex light and objects under strong light, whether it is fishing, skiing, or driving people.Under normal circumstances, Sunglasses clamps will have this function, but the formal brand will have a polarizer test card, and it will be presented to consumers with the pattern of fish and water. Therefore, you can try it.To fish, it shows that its polarizing effect is good.

2. Whether there is ultraviolet function

When buying Sunglasses clamping, consumers must confirm whether this product has the function of anti -ultraviolet rays; if only the filtering function, it does not have ultraviolet function, it cannot be 100 % blocking ultraviolet rays.Essence

3. Check the structure of Sunglasses clamps

If it is not a formal brand, iron device is generally used, which will make the lens easily scratch and even cause damage to the eyes.On the contrary, if we choose a big brand, its quality will also be guaranteed. When the lens is in contact with it, it will avoid the separation of silicone.

How to use Sunglasses clamps

Poor Sunglasses designed for myopia people are effectively anti -glare and ultraviolet rays.It is especially suitable for outdoor sports such as driving, Outdoor, fishing, etc.Adopting polarized lens technology, the visual resolution is greatly improved.Eliminate 99%of reflection light and scattered light, making your vision more clear and Smooth.The lens is specially added to enhanced treatment, which is effective, scratch resistance, and impact.

Sunglasses clamps should be made from seven layers of special materials, each with its own functions.The polarization angle and the radian of the lens are designed according to the principles of precision optical.The wearers will never have the distortion and dizziness of the imitation products.Each lens is strengthened by the original factory, scratch resistance and difficulty in deformation, and broken.It can be used for a long time and the performance is unchanged.The production and materials of the Sunglasses clipped glasses have professional design and producers, which are comfortable and durable.

Sunglasses clamps are clamps or mirrors that are extended to design on the basis of mirror racks.It is often seen on the road that many people's glasses are also a pair of Sunglasses that can be turned down.When walking under the sun, just turn down the Sunglasses and cover the myopia lenses to play a role in Shading.When walking under the sun, the Sunglasses were fixed on the Myopia glasses rack. Others looked like wearing a pair of sun glasses; when I walked into the room, as long as the Sunglasses were taken off, it was a pair of close vision glasses.There are also three types of fixed Sunglasses, which are called "mirrors". One is to use magnets to suck directly on both sides of the mirror frame, and the other is to directly design the magnetic connection point in the bridge of the mirror frame.Another is stuck on the frame.In addition to ordinary Sunglasses, the lens also has a polarized lens.

For women who do not like Sunglasses, it is recommended that you buy Sunglasses directly, and Sunglasses also have the kind of optometry.

Let's talk about the steps of using clamps

1. First pinch the spring button of the clip to open the clip.

2. Squeeze the spring clip and clip from top to bottom in the bridge of the glasses.

3. Covered the clip to the glasses and adjust the position.

The above is the simple use step of the clamp. The clip can be selected according to the glasses style wearing.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. How much is the size of the office negotiating table?

1. negotiating tables for discussing matters in the office, conference rooms or guest rooms. Its shape is similar to the dining table; the champion of the general table is metal, with solid wood, glass, fireproof board, marble, etc.Can be divided into round tables, Square tables, triangle tables, etc.If you want to choose the right negotiation table, you must first see how large the space is placed on the negotiation table. Determine the size of the table according to the space. There are many customization now, and the size can be customized at will.

2. The diameter of the circular shape is 90cm and the height is 76cm; the specifications of the Square are 120*65cm; the material has glass and wood, and the style specifications can be customized.

3. The office negotiation table needs to be customized according to the office size and decoration. The size of the Square table is generally 90 90cm, and the rectangular table is generally 90 120cm.

4. This mainly depends on the area of your negotiation room. You must set the appropriate size according to the area you give. Generally, you can customize the size of the table.

2. What plants are placed on the table?

First of all, some too large plants are not suitable for placing on the desktop of the negotiating table.Then exclude some plants with a strong aroma or stimulating smell. The remaining plants are basically fine. Of course, the plants are definitely purposeful except for decoration. Below two columns.

1. Green Luo, Solk Orchids

Green plants like this can adapt to almost any occasion. Green plants can also ease the tension of people. If you don't know what to put, then green plants are almost wrong.

2. Rose, Violet

Plants of bright flowers like this can increase the mood when talking with each other more targeted, such as roses, violets, etc., which is more helpful. If you want to create a warm scene, you can consider putting lily, etc. Of course, we are in, of course, we are inWhen you place it, you must consider the preferences of the two parties. For example, if someone is allergic to flowers, or just does not like flowers, then it is not suitable for putting flowers. At this time, you should consider greenery.

Note that the plants should not be higher than the height of the eye, so that the entire meeting room is neat and refreshing.

3. How to buy the table

1. The size, angle and dimension of the table and chairs must be carefully checked. The size of the table and chairs mainly depends on the size of the meeting, that is, it has a certain relationship with the number of participants.It can generally be divided into small negotiation tables, neutral negotiation tables and large -scale negotiation tables.The desktop angle of the negotiation table should not be too sharp, and generally the appropriate arc transition is prevailing.

2. Pay attention to negotiating the smoothness of the desktop: The table is also a decoration, the desktop is Smooth, the carvings are fine, making the negotiating staff feel comfortable.

3. Discuss the choice of tables and chair materials. The common materials of the tables are solid wood, artificial boards, density boards, steel, marble, and glass. solid wood is generally more expensive for high -end negotiations.

4. Pay attention to the tables of the table: the negotiation table must be firm, so as to ensure the long -term use of the table.

5. Finally, pay attention to the qualifications of the supplier, such as discussing whether the inspection of the tables and chair materials is qualified, and negotiating whether the welding rivet of the tables and chairs is qualified.