Classification of baby swimming rings
Classified by material
1. Plastic baby Swimming ring
Such products are made of plastic, most of which are single airbags, and the design is almost the same as adult products.It is a bit simple, easy to make, and the price is relatively affordable.
2. PVC Baby Swimming ring
PVC materials are relatively new. This material is better, whether it is gloss, feel, comfort, or firmness, and the leak -proof effect is also good.Most of the products of PVC are installed with double airbags or four airbags, and the safety performance is better.
Classified by airbags
1. Single -gas sac baby Swimming ring
This Swimming ring is the overall design and production, which is not used for inflatable air.The full -fledged swimming circle is poor, and the baby's body is very soft and tender. Therefore, this swimming circle may not be particularly comfortable for babies.
2. Double airbag Baby Swimming ring
Two airbags were installed on the double airbag baby Swimming ring, and double buckles were also set up, providing dual insurance for infants to learn swimming.Most of them are designed with dual airbags. Each airbag has its own gas mouth. When inflating, pay attention to adjust the comfort, not too much or too little.After putting on the baby's Swimming ring, you have to buckle it, so that you can rely on the buoyancy of the other airbag to hold the baby in the critical situation of one of the airbags, and strive for more time for the mothers to save the baby.Make sure your baby's life is safe.
3. Tethel cystore baby Swimming ring
The original intention of ensuring the safety of the baby's safety was divided into two design and production.When using this Swimming ring, if there are 3 airbags in 4 airbags, users will also hold the baby out of the water within the safe time range, and the possibility of 3 airbags at the same time is extremely small, soThis Swimming ring is completely for the safety of the baby.
However, there are also shortcomings in this four -gas sac swimming circle.One, inflatable problem.When inflating each airbag, the gas in the pro -sac on both sides must be considered to ensure the balance of the baby, which increases the difficulty of inflatable.Second, it is easy to scrap.As long as the four airbags are damaged, the remaining three are useless. The entire Swimming ring is directly scrapped, which increases the damage rate of the Swimming ring.
Classified by parts
1. Neck ring
When a baby was born, he couldn't look up. At this time, you could use this product.The height of the water surface of the baby swimming pool is similar to the height of the neck ring worn by the baby.
2, armpit circle
In the process of growing up, babies are becoming more and more interested in swimming and need to further learn swimming. However, as the ability of activity enhances, they will hate the feeling of neck being restrained and yearn for a wider field of vision, and the water depth of the baby's swimming pool is not enough to achieve the water depth of the swimming pool to achieve the water depth of the baby swimming pool to achieve the water depth of the swimming pool to achieve it to reachLet the baby continue to swim.If the original swimming pool is also needed, it can only change the baby's swimming height or the depth of the pool, move the Swimming ring down, and put it under the armpit of the baby to increase the height of the baby's swimming, thereby generating the underarm circle.
Classified by shape
1. Round baby Swimming ring
The circular Swimming ring is the most primitive style, and it is also the model of most swimming rings.The circular shape is not only for the appearance of the appearance, but also to improve the balance of the Swimming ring, so that the baby is safe and comfortable to swim freely.
2. Star -shaped baby Swimming ring
The star Swimming ring is designed with a circular Swimming ring. The difference is that the periphery of this Swimming ring has arc, which is more advanced than the circular Swimming ring, and the shape is more cute.However, there are also disadvantages. The original circular Swimming ring was dug into a star shape. In the meantime, the inflatable space decreased, and the buoyancy was weakened, which caused most of the swimming rings to sink, which increased the surface resistance. This made the baby's swimming difficulty.increase.
Features of professional baby swimming rings
1. The Skin of infants and young children must be softened. To ensure safety of product materials, it must meet the standards of medical equipment.Select the materials to meet scientific standards, pay attention to protect the baby's Skin.
2, Smooth appearance to prevent stabbing babies.
3. Choose a soft -colored product, which will not cause visual stimulation to the baby and avoid affecting its visual development.
4. Install multiple airbags. Four is better. Each airbag is equipped with an inflatable mouth to ensure that the buoyancy of other intact airbags when a certain airbag is damaged can be called the baby to get out of the water to prevent hidden safety hazards.
5. In order to protect the baby's jaw, the Swimming ring must have a unique mandibular groove design.
6. Magic buckle: The buckle band at the upper and lower ends is used to hold the baby swimming circle to ensure the safety of the baby during swimming.The size is adjusted according to the baby's neck circumference, so that he can swim comfortably and safely.
7. Leakage gas valve: The baby Swimming ring uses a special leak -proof design. Even if the gas mouth is not closed, the leakage will be slow, so as to strive for enough time to rescue the baby.
How to use baby swimming rings
1. Inflatable
Perform in order in front of it first. First, pull out the air mouth inside the airbag, open the lid, and then insert the mouth mouth to insert the gas mouth to press it tightly.Then use two fingers to pinch it tightly, about 40 % of the gas, and then use the same method to charge the front airbags and fill about 50 % to ensure that the two sides are full of 90 % of the gas.During this period, pay attention to charging the gas slowly, and only need about 60 % of the gas when used.(Pressing with your fingers, the thumb is sinking around a finger)
2. Adjust
First adjust the airbags on both sides to balance, that is, the gas volume in the airbags on both sides is consistent, so that the inner ring is round, and then install the buckle band and install the buckle.Perform safety inspections before use, pull the insertion in different positions, depending on whether there is a gap between the airbags on both sides. If there is a gap, you can shorten the buckle band.
3. Powder
(1) In the order of the previous and back, the two sides of the swimming circle are relieved.
(2) Open the gas mouth cover and pull out the air mouth from the airbag. Pay attention to the force when pulling the air.
(3) At this time, there are two methods. One controls the root of the gas mouth to prevent the gas from leaking too quickly; secondly insert the gas needle utensils into the position of the ventilated openings of the air, and finally gently press the airbag to slow down the gas slowly to slowly slowly press the gas to slowly slow down the gas to slow down the gas slowly.Remove.
precautions for using the baby swimming circle
1. Insert bands cannot be pulled too much, prevent damage, cannot remove the socket at will, and install it correctly to prevent falling off.
2. When using gas needles, you cannot be too hard or inserted too deeply to prevent the Swimming ring leak -proof air valve or even piercing swimming rings.
3. If it feels that the inflation is too laborious or unable to fill the gas, it may be that the leak -proof film is too close to the closure of the leak -proof piece. You can pinch the root of the filled mouth with your hand to open the leak -proof film and then inflatable.
4. It is strictly forbidden to place the Swimming ring near high temperature to prevent problems with the material.After use, dry it and place it in a dry and cool place.
5. If the Swimming ring is equipped with a thermometer, do not place the thermometer in the hot water of 50 degrees and 50 degrees above 50 degrees to avoid the problem of errors or the thermometer damage caused by the visual value or the thermometer in the measurement Tube.
Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;
Special Mic 
