99%of people will be wrong, scientific first aid to break rumors

Nosebleed: Be bowed, don't look up at your head

In order to stop the nosebleeds, some people may choose to look up at the sky, but in fact, doing so can not promote hemostasis, and they may pinch the blood into the trachea.The scientific approach should be to lean your head slightly and pinch your nose to compress the hemostasis. If you have the conditions, you can also help it.Cotton or toilet paper in the nasal cavity may interfere with the local coagulation process, so it is not recommended.If the bleeding is still non -stop after ten or twenty minutes, please ask the doctor for help.

Scald: To cool down, do not oil, salt, vinegar Flour toothpaste

From applying toothpaste and applying Flour to wiping large sauce, folk recipes for treating burns can be described as a variety of.However, these things are not helpful for treatment of burns, and they may cause wound stimulation or even infection.When scalding, what should be done is to reduce the local temperature with cold water as soon as possible. Do not apply toothpaste or oil and salt sauce vinegar, and seek medical treatment in a timely manner.

Dripping eye drops: To drip the conjunctiva, do not dripping eyeballs

Eye drops can't always drop?It may be that your eye drops are wrong.It is a better way to drop the eye drops into the center of the eyeball and drip the eye drop into the conjunctiva (where the lower eyelids and the eyeballs).In addition, the capacity of the conjunctival sac is very small. Each drop of potion is enough to fill it up, and it will be wasted if you get too much.

Take medicine: the pills raised their heads, the capsule bowed her head

In order to go smoothly, people generally "raise their necks", which is useful, but it is not suitable for capsules.In the capsule, the filling of the drug is relatively loose, so the density of the capsule is relatively low. It is easy to float up and stick up and down when it looks up.Therefore, when eating capsules, bowing your head will be smoother.Don't look at this trick very simple, it has research support to improve drug swallowing.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. The breeding method of shrimp and flowers

1. Water fat maintenance

When breeding shrimp clothes, it must provide sufficient water and Fertilizer. Generally, watering once every 1 to 2 days to provide it with sufficient moist soil. In order to make it grow more vigorously, it must also grow 10 ~ 10 ~For 15 days, the thin liquid Fertilizer was applied for it, and leaf Fertilizer was applied once a week.

2. Suitable for light temperature

The warm shrimp and flowers that like warm and keep the environmental temperature it grows at 18-28 C, which can make it grow more vigorously. Do not put it for too long because of its shade resistance for too long, it will grow it will grow, and it will grow. It will grow. It will grow. It will grow.Bad, you need to accept sufficient light for about 5 to 6 hours.

3. Ventilation and frost

When breeding, we should also pay attention to maintaining the good ventilation of the growing environment of the shrimp coat, and avoid the stuffy environment to make it poorly grow.Do a good job of cold protection during frost, so as to avoid frostbite the shrimp and flowers at low temperature, stabilize the temperature above 10 C.

4. Pruning insect prevention

In the breeding methods and precautions of shrimp and flowers, it is necessary to top up and trim the branches for them in time, prompting it to germinate more branches that look more lush.It is also necessary to spray the pesticides of the diseased insects such as the killing red spiders and the garaphs on a regular basis so that it can grow healthily.

2. precautions for shrimp and flower breeding

1. Change the pot in early spring

Every year, the breeding shrimp and flowers are needed to change the pots for potting, and more choices in early spring.Take it out of the basin, trim the roots, and cut off its branches and leaves. Only 2/3 can be kept, and then re -planting and maintenance to make it better grow.

2. Cooling treatment

Pay attention to watering in summer to create a good environmental climate. When watering, you can pay attention to spraying water on the ground surface, plants, and pots of pots. Special spraying of water fog on the plant can make the plant branches and leaves more fresh and brilliant, and increase ornamental.Effect.Water spraying can increase the humidity of small -range air, and also reduce the temperature, which is conducive to the growth and blooming of potted shrimp and flowers.

Third, the cultivation method of shrimp and flowers

1. Potted method

Potted soil is used in 4 parts of corruption, 3 parts of the garden, and 1 rotten Organic fertilizer. The sand soil and fresh sawdown each account for 1 copy.

Then put some animal hoofs and crushed Bone blocks on the bottom of the basin as the bottom Fertilizer.

Potted shrimps should be fully accepted in spring and autumn. If the plant is too shaded and the light is insufficient, it is easy to make the stems and leaves long, which not only affects the beautiful plant shape, but also affects the quality and quantity of flowering.

2. Cutting method

As long as the temperature is appropriate, it can be inserted in all seasons, but it is mainly in spring and summer.If you cut in summer, you should pay attention to the shade and moisturizing.

Cut the ears of the two to 3 sections of the year as spikes.The old branches or tender branches can be cut. Under the same temperature conditions, the tender branches are rooted quickly.

Put the base 1 section into the plain sand soil, the room temperature is 20 C, take root for about 10 days, and bloom the following year.

Yellow sand, vermiculite, or perlite can be used as cuttings matrix. Cuttings should be strictly disinfected with matrix.

After the cuttings are rooted, the pot is transplanted in time and shaded properly. After the new leaves grow, move it to the sunny place.

1. What are the role of yoga bricks?

yoga bricks are auxiliary appliances for yoga action.It is mainly to prevent strain from making high -difficult movements.Some movements in the yoga body need to fully stretch the arms or the lower waist to touch the ground.The auxiliary brick can help you stretch the pelvis, and then slowly adjust the distance between the yoga brick and the ground, and gradually complete the perfect movements such as self -softness and extension.When doing some genre yoga movements, in order to take the absolute standard of action, use yoga bricks to help.

In the yoga position method, some movements need to completely stretch the arms or touch the ground in the lower waist. yoga bricks can help stretch the bones; when the hand -touched position is like a triangle stretch, the hand can be supported on the yoga brick; after the spine is made, the spine canWhen the curved action, use yoga bricks to support the body, which can reduce the probability of injury. On the basis of safety, do every action in place to strengthen the body shaping effect;When the instep is not soft enough, the help of yoga bricks can be borrowed when it is not completed.

2. How to use yoga bricks

There are four categories of yoga bricks on the auxiliary role of asanas: increasing length, auxiliary balance, deepening the asana, and auxiliary relaxation.With the help of yoga bricks, it is easier to positive, and beginners can achieve the effect of master.

1. increase length

(1) Dog -style

In the practice of the lower Dog, due to stiffness of the body

yoga beginners often can't step on their feet, and the spine cannot be extended

With yoga bricks, help increase length

And it can also play a role of non -slip

(2) Upper Dog style

In the upper Dog style, due to the stiffness of the body, the back is weak

So after straightening his arm, your legs are still on the pad surface steadily

Borrowing yoga bricks to increase the length of the arm, the legs can be lifted away from the pad surface

And it helps to open the chest cavity and the development of both shoulders

In addition to the above, in terms of triangular and side -angle forms, you can also use yoga bricks to increase the length, the completion of the auxiliary body form, and establish the awareness of the body.

2. Auxiliary balance

(1) Triangular torsional style

In the triangular torsional style, when the torso is reversed

The body is particularly easy to shake, unstable

At this time, with the help of yoga bricks, the arm is supported on the yoga brick

Not only can help to stabilize the body, but also deeper when reversing

(2) inverted arrow style

yoga beginners use yoga bricks to stabilize their bodies

Try to lift your legs upwards

In addition to the above, in the form of warrior 3, semi -monthly, and crows, you can also use yoga bricks to help stability and auxiliary asanas.

3. Deepen asian form

(1) Ride -up style

If your hips are tight, in the horse -riding practice

Can add a yoga brick to help you deepen the form

At the same time, assist hip opening, stretch the front side of the thigh

(2) lying on your knees

In the practice of supine knee

Many yoga beginners feel too simple and no effect

If a yoga brick is added on the sacrum

See how the effect, don't feel too strong in your thigh stretching

(3) Small bridge style

In the small bridge -style exercises, many Jia people can easily open their legs outward

At this time, borrow yoga bricks, legs pinch yoga bricks

Not only can prevent the legs from opening, but also activate the legs and hips

The effect of practice jumps up

In addition to the above asana, in the camel -type, bow, etc., it can also be used to help deepen with the help of yoga bricks.

4, Auxiliary relaxation

(1) Heroes of the lying on your back

Among the heroic heroes, add a brick on the back of the sternum

It can not only reduce the difficulty of the constitution, but also more comfortable practice

And it can also help open the chest and shoulders

(2) The spine of the supine lying twists

The spine of the supine lying on the spine is twisted, the legs are pinching yoga bricks

Can effectively relax the knees and lower waist back

The practice is more comfortable and the effect is better

In addition to the above form, in the beam horn, infant style, hero forward flexion, etc., you can also use yoga bricks to help relax and complete the completion of the asana.

1. Where is the bedside Wall lamp installed better?

The Wall lamp on the bedside is generally installed in the upper left position of the bedside. The lamp head can be rotated and easy to read. So what is the installation position of the bedside lamp?

1. The installation position of the bedside Wall lamp is generally above the bedside. Generally, there is a double -headed lamp or one on both sides in the middle.But to remind, if the wire head is not reserved on the wall before the decoration, it is best not to choose the Wall lamp as the bedside lighting.Because the Wall lamp is often installed in the middle of the wall, there is no dark line, you need to pull a wire on the wall according to the position of the Wall lamp, so that the Smooth wall surface looks not beautiful.

2. The bedside Wall lamp switch should be reached out. No matter what bedside lamp you choose, you must consider whether the lamp is easy to switch and adjust.If the switch on the bedside wall is not allowed to reach out when lying down, then when you are drowsy and want to turn off the Lights, you have to work hard to find the switch or adjust the brightness again.It's right.

2. How to buy the bedside lamps

1. lighting quality

When buying the bedside lamp, first look at the quality of the lamp itself.Lancouns are usually made of glass, sheepskin paper and other materials, and brackets are generally made of metal.The lampshade mainly depends on whether its light transmission is appropriate. It is advisable to use the low surface brightness of the beaming material lampshade, and the surface pattern should echo the overall style of the bedroom. The color should not be too bright.It is also necessary to check whether the metal's corrosion resistance is good, and whether the color and luster are bright and full are important indicators to check the quality.

2. Light brightness

Generally speaking, the bedside Wall light is good for softness, and the degree is less than 60 watts.In addition, you should choose different types of bedside Wall lights according to the installation needs. For example, if the bedroom room is small, use a single Wall lamp, and the double -headed Wall light is used in large rooms;of.

3. lighting size

Generally, for the size of the bedside Wall lamp, we mainly choose according to the actual area of the bedroom. This not only allows the bedroom space to have a warm feeling, but also beautiful.

4. Practical performance

The bedside Wall lamp is suitable for light bulbs that can be tuned, so that the adjustment that can be adjusted during reading is relatively bright, and the softness and hazy adjustment when you sleep quickly.Light's bedside Wall lamp.Of course, if you are a double bed, you should choose the bedside lamp of the lighting switch, so that one of them can not be disturbed by light when reading a book.Finally, it should be noted that it is best to choose the bedside lamp with a protective cover, which can prevent danger.

Third, the installation method of the bedside Wall lamp

1.

Use a brush to paint the adhesive on the adhesive surface. This is the easiest and most commonly used method.

2. Spraying method

For low viscosity adhesives, ordinary paint spray guns can be used for spraying.For those high -viscosity adhesives with short active periods and difficulties in cleaning, you can use Berte spray guns in the enhancement of the plastic industry.The advantage of the spraying method is that the glue is uniform and the efficiency is high; the disadvantage is that the glue is large (about 20-40%), and the solvent is lost in the air to contaminate the environment.

3. Self -flowing method

Use rainy automatic device.This method is very suitable for flat plate -shaped parts, with high efficiency and suitable for large -scale production.In order to prevent the glue from blocking the nozzle, the glue used must have appropriate viscosity and liquidity.

Four,Bedside Wall lampHow much height is appropriate

The installation height of the bedside wall has no special requirements. It mainly depends on the height of the bedside. Generally, it is more appropriate to be about one meter five to one meter eight.If the Wall lamp is out of the wall, the distance from the wall should be kept from about ten centimeters to 40 cm.If the height of the bed is forty -five centimeters, and the total height of the Mattress is 90 centimeters, the height of the Wall light should be higher than 90 centimeters, and it needs to be installed on the bedside table.

1. Heating pipe decoration

1. Hide

Hidden is to hide the water, heating, hood and other pipes such as some furniture or shape design.The upper and lower water pipes and gas pipes of the restaurant and kitchen can be designed as wall furniture, such as wine cabinets, wallcathers, corner cabinets, etc.;, Can design a set of Hanging cabinets, hiding the range hood and hoods in the Hanging cabinet.The top or first -layer housing often has a heating pipe through the indoor window, which can be hidden into the curtain box, so that the baffle of the curtain box covers all the pipes.Make full use of wall furniture or wall decoration to hide pipelines, which can not only hide the pipeline in the furniture, but also increase the storage space.

2. Smooth decoration

The decorative radiator pipeline does not have to be hidden, and it can also be beautified by using it to make some decorations.If the pipeline design can be painted with different colors to make it a creative shape; or the pipeline is wrapped around with plastic flowers and plants, and the pipeline is decorated as a trunk, which will produce a unique decorative effect.

3. Buried Tube

The buried Tube is to bury the buried pipelines under the surface layer through the decoration of the wall, the ground, and the top.Various bright lines such as wires and telephone cables can be used in the wall of the wall -buried lines on the wall. When the wiring, it is necessary to lay a dark Tube. Be careful not to bury the wire directly into the gray layer, because this is not only not conducive to the future replacement of the line replacement in the future.And it is also very unsafe.If it is slotted on the wall of the reinforced concrete, the machine should be cut with a machine, and an electric hammer should not be used. The electric hammer can easily loosen the wall around the buried groove and destroy the wall structure.All kinds of bright lines can also be buried offline through the gypsum line or skirting line around the top surface.

two,radiatorHow to decorate

In order to ensure that the home can have good heat dissipation and perfect decoration effects in the home, friends must consider the future use effect of the heating tablet in the designs of the heating tablet, but also consider the decoration effect.Avoid leaving any regrets in the decoration.

1. Hidden processing of Heating tablets -heating louver/heating cover

The display cabinet and the heating cover are combined with one.The general heating hood is determined according to the height and length of the heating itself. Although it is economical and practical, it is inevitable that they are the same.You may wish to create a simple and practical small display cabinet in the location of the heating, and keep the heating bag in the display cabinet, leave the maintenance door in front, and make it from the top of the display cabinet with glass and board.In this way, the heating cover not only beautified, but also made full use of the space.

The display cabinet and the heating hood are used to make heating shuttle with more wood in the past, which is beautiful, but it affects the heating heat dissipation. Many designers are distressed by this.However, if you use punching iron plates to make heating shutters/heating masks, you can make full use of the characteristics of good metal thermal conductivity, which can make the decoration and heating.

2. color treatment of radiators

The simpler and effective way is to brush the radiator with monochrome paint (such as white, light blue, etc.), and make a wooden shelves slightly wider than the radiator on the radiator. The thickness is about 40mm, the surfaceBrush the paint or mixed oil, put a bottle of flowers or a group of family photos on it, making people feel simple, warm, elegant, and romantic after watching.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;