Sys_Tawanna's Articles

1. What is the size of Maza

Maza is a traditional seat, which is mainly used for outdoor activities, picnics, Camping or courtyard leisure. It is small and light and easy to carry. So what is the size of Maza?

Maza size is generally designed according to ergonomics and convenience of use. The specific size may be different, but generally within the following range:

1. Height (the length of the legs of Maza): 30-45 cm, Maza with a back will be higher.

2. Width (the length of the Maza seat): 40-50 cm.

3. Deep (depth of the Maza seat): 30 ~ 40 cm.

Please note that these sizes are only used as general references. The size of the specific products may be different due to the brand, design and use. When purchasing, please select the appropriate size according to your actual needs and use occasions.

Second, Mazado is sitting comfortably

Maza's height has a great impact on the comfort of sitting. Maza, who is too tall, is not comfortable. Generally speaking, the comfortable Maza height should be able to allow you to sit down.Or raise a little bit, and ensure that your feet can be placed on the ground flat, and the specific height will vary depending on the height, body shape and habit of personal.

For most people, Maza's height is more comfortable between 35 cm and 45 cm.This high range can adapt to the height and body shape of most people, while ensuring that the waist, back, and thighs can get good support and avoid discomfort when sitting for a long time.

In addition to the height, Maza's material, stability, and the comfort of cushions will also affect the feeling of sitting. Therefore, when choosing Maza, in addition to considering the height, you also need to pay attention to these factors.

1. The breeding method of Xitanghua

1. Soil

The soil requirements are not strict. As long as the texture is loose, nutritious, drainage, breathable, pH value is even better.Be careful not to use alkaline soil.

2. Breeding

The large -scale cultivation method of the nursery can be sowed, and the heavy -petal varieties can be divided into or cuttings.Cuttings should be cut with hard branches in early April, and cuttings can also be cut in the rainy season in July-August. Cut the green branches and insert it into bed.Pot.

3. Light

is a environment with sufficient light. If the growth environment is too shade, it is easy to lead to poor growth in the growth of Xi Tanghua, and the branches and flowers will become thinner and small.

4, temperature

Xi Tanghua prefers a warm environment, but in the summer, the light is very strong and the temperature is very high, so you must find a way to cover it, otherwise it can easily lead to burning the leaves of Xitanghua, generally 18-25 degrees Celsius.In the middle is the most suitable for the growth of Xi Tang.

5. Water

There is no too much demand for water, and there is no need to water.Guarantee the soil in the potDon't dry.However, the temperature in summer is high and the amount of evaporation is large, which can increase the amount of watering appropriately to prevent too dry.

Second, the main points of maintenance of

1. Watering does not require too much water, and there is no need to water.Make sure that the pot is not dry.However, the temperature in summer is high and the amount of evaporation is large, which can increase the amount of watering appropriately to prevent too dry.

2. Fertilize the seasons and growth status, and apply thin liquid Fertilizer in the afternoon.Once the Fertilizer is too much, it is necessary to pour some water to dilute, so that the Fertilizer is discharged with flowing water.

3. Pruning the Tattoo branches is dense. Every 2-3 years of dormancy, 3-4 years of old branches should be removed and new branches are promoted.The residual flower branches after the flower should be cut off in time. After the winter, the disability, the diseased and insect branches, and the weak branches should be cut in time to ensure that the position of the plant is well -proportioned and beautiful.

4. The time for changing the pot to the pot is generally changed to the basin, it is best to be in spring or autumn.If you grow faster, you can change it once a year. If it is relatively cold, you can change it every three years.

Third, the problem that Ji Tanghua may have

1. Disease

The main occurrence of "yellow leaf disease".It will cause tender leaves to become yellow, and the entire leaves will eventually fall.Sulfuric acid iron sulfur solution can be poured, three to four consecutive times.In addition, you can also supplement some other Fertilizers.There are also "brown spot disease", from July to September, it can be cleaned with bacteria.

2. insect pest

There are fewer pests. Occasionally, the harm of "red spiders" and "scripts" can be sprayed.

1. What is the embarrassing line of yoga pants

When wearing yoga pants, many friends are more concerned about the problem of "embarrassing line". The so -called embarrassing line refers to the line in front of the crotch in front of the yoga pants (that is, the "T -line line").This line may attract attention.

2. What is the difference between the embarrassing line and the embarrassing line of yoga pants

Will we wear yoga pants will reveal the shame of the triangle area is a question that everyone is more concerned about. Some yoga pants on the market have an embarrassing line design, and some are not. The difference is mainly in two aspects:

1. Different design concepts

The design concept of yoga pants without embarrassing line is comfortable and natural.Because there is no suture line in the front, even if some movements are doing relatively large movements, there will be no uncomfortable feeling such as pulling.The embarrassing yoga pants are designed because of the design problems, which makes the stretching of the pants cause uncomfortable feeling when doing some more movements.

2. Different from wearing experience

Some yoga pants use the cross or tailoring designs, and the indecent shape of the crotch behind the upper body is the so -called embarrassing line.The yoga pants with T -line lines will further emphasize the lines of our embarrassing zone due to good material elasticity and strong wrapping. When it is matched with some tops (such as vests)It will produce discomfort when doing some movements.In order to avoid such embarrassment, you can choose parallel crotch yoga pants without the T -line line.

Third, yoga pants are embarrassing line, good or embarrassing line

yoga pants have their own characteristics of the embarrassing line and the design of the embarrassing line. Generally speaking, yoga pants with embarrassing lines have creases on the waist, which can show the beauty of women's curves.Round, no curve, lighter and comfortable, can reduce embarrassment, how to choose mainly depends on demand.

How to renovate the old rattan chair

It depends on the depreciation of the rattan chair. If it is only old in appearance and the structure is not hindrance, it is recommended to brush a new layer of new paint. The step is to clean and dry it, then use sandpaper to polish its outer rattan frame to stain the Skin and restore the epidermis and recoverSmooth, and then protect the optical oil. After using it for a period of time, wipe the vine ware with light saline, which can not only stain and make it flexible and lasting.It plays a very important effect.If the rattan itself is broken and broken, you must go to the rattan shop and find someone to repair it.

What are the main points of the rattan chair to clean and maintain

The shape of the vine chair is beautiful and novel, and the handmade skills are exquisite.However, it will still appear dirty after using it for a long time, so in the usual vine chair maintenance, pay attention to cleaning problems.First of all, we can use some light saline to wipe the vine chair to achieve the effect of pollution.For us, the ash on the rattan chair is a difficult problem in cleaning. It doesn't matter. Xiaobian is here for you.For the dust treatment during the maintenance of the rattan chair, we can wipe it with a soft wet cloth. If the dust between the seams of the rattan chair, we can use a paint brush or a vacuum cleaner to clean it. Do not wipe the rattan chair with a cleaner or solvent.Come to clean, so as not to lose elasticity and gloss in the vine chair.Finally, the cleaning of the rattan chair should be remembered. After wiping it with a wet cloth, dry it with a dry cloth, because the rattan chair is equivalent to woody easy moisture. Pay attention to the maintenance of the rattan chair.

Keep ventilation.The cross section of the rattan chair is covered with fine catheter, so the vine chair can absorb a certain amount of water. If these moisture reaches a certain degree, it will appear soft, loose structure, and drooping planes, and it will be prone to mildew.Therefore, in the cleaning of the rattan chair, remember to dry it with a dry cloth.Secondly, the maintenance ventilation of rattan chairs is also critical, especially in the south of the rainy season, the maintenance ventilation in the maintenance of rattan chairs is particularly important.After cleaning the rattan chair, if we feel that it is very troublesome to dry it with a dry cloth, we can also move the rattan chair to a place with a church to blow off the air.The opposite effect leads to deformation and even break.

Five types of decontamination method cleaning rattan furniture

1, Soap Discovering Method

You can cut the hard hair of the paint brush into a small brush, and you can remove the dirt in the furniture with them.Vine furniture should be used for drying the furniture for one day, one or two nights after cleaning.

The tea is dirty, and the painted furniture is contaminated with dust. It can be wiped with wet tea residue wrapped in gauze, or scrubbing with cold tea, which will make the furniture particularly Smooth and bright.

2, Milk Discovering Method

Use a clean rag to soak in the milk that cannot be drunk in the expiration, and then wipe the tables such as the table with a rag to remove the effect of dirt, and finally wipe it with water.

3, Lemon Discovering Method

If the wooden furniture is scalded by the match, you can wipe it with half lemon first, and then wipe it with a soft cloth immersed in the hot water.Finally, use the dry soft cloth to quickly dry and brighten it to recover as early as the beginning.

4Plane pollution method

Wipe the surface of the furniture with the equal amount of white wax and hot water phase, and then rub it with a soft cloth.

5, Salt water pollution method

The accumulation of rattan furniture has a long period of time, which not only affects the appearance, but also is not hygienic, but it cannot be washed with ordinary detergent to avoid damage to the rattan bar.

How to clean and maintain vine art furniture

1Roney furniture cleaning

(1) After long -term use of rattan furniture, rattan furniture usually becomes dirty or ash, at this time, it needs to be cleaned.When cleaning rattan furniture, use less water.You can use a clean cloth dipped in water for cleaningThen, then

(2) If you use light salinede1The effect will be better. Fresh salt water can not only remove the bacteria on the rattan furniture, but also keep it more flexible for a longer longer, prevent it from becoming crispy, or be worm.

(3) In addition, some subtle places and gaps can use toothbrushes, wicker and other fine hairs to eliminate storage dirt in the gap.

2, Avoid direct sunlight in the sun

(1) Tengyi family has a lot of pores, and rattan furniture is the most afraid of benefits. Pay attention to avoid the key such as the key to hurt the furniture.

(2) The best way to maintain rattan furniture is often sitting and often sitting. Frequent use will not only give vicissitudes of vicissitudes of vicissitudes of vicissitudes, but also help maintain the toughness of rattan materials.

(3) When using and stored rattan furniture, avoid contact with the source of the fire, the heat source, and do not place it under the sun for a long time.

(4) Protonous rattan furniture refurbishment method, clean and dry first, then use sandpaper to polish its outer rattan frame, make the epidermis dirt and return to Smooth, and then protect the light oil.

3Put the level of anti -deformed level

(1) When storage and use, try to place it in a flat place on the ground, so that the four legs of rattan furniture are safely and smoothly. If it is placed on the ground, the furniture often shakes, which will affect the service life of the furniture.

(2When using and storage, try not to be exposed to the sun, approach the supply, or high temperature objects and places, otherwise it will cause problems such as deformation, burn, cracking and so on.

4, To buy rattan furniture points

(1) Buy rattan furniture first starting from the material of the rattan, check the thickness of the rattan materials for making furniture, usually choose furniture made of rattan with thick and uniform and uniform mixed color.

(2) The inferior vine is thinner, small toughness, low tensile force, and low tensile power. The furniture of furniture is weak. The important ability is weak. You need to pay special attention to whether the position of the position has a rough or uneven feeling.

(3) The rattan material made of rattan furniture is refined by high -temperature steaming and standard production technology. The rattan rod requires the consistent thickness and uniform color; then check whether the overall color of the rattan furniture is consistent, whether the binding part is stable, whether the appearance is correct; When buying, pay attention to the treatment of rattan fiber. Whether the surface of the rattan material is Smooth and delicate, and protect the paint.

5, Rattan art furniture moisture -proof treatment

(1) Wide vines must prevent moisture. When rattan furniture is moisture, it will cause wood to decay. Metal type accessories will rust, the adhesive part is dehydrated, and so on.

(2) You must prepare for the prevention of moisture. Do not use water to clean the vine furniture. Do nt clean it with alkaline water. You can use a wet cloth to wipe it. Do nt rinse it with water. If you unfortunately wet the rattan furniture, find a way to air dry as soon as possible is the best choice!

In October 2021, the Ministry of Industry and Information Technology announced the list of "2021 National Technology Innovation Demonstration Enterprise", and found that 58 enterprises were "national technology innovation demonstration enterprises".Elected.

It is reported that the selection was jointly carried out by the Ministry of Industry and Information Technology and the Ministry of Finance to evaluate from many aspects such as innovation investment, innovation cooperation, technological accumulation reserves, technological innovation output, and technological innovation benefits.The results of the prominent research and industrialization have been recognized by the country.

Focus on key core technologies, with significant innovation results

At present, Yuyue Medical has established a number of national, provincial and ministerial -level scientific and technological innovation platforms, including the National Enterprise Technology Center, the National Industrial design Center, the National Postdoctoral research Station, Jiangsu Provincial Key Laboratory, Jiangsu Industrial Innovation Center, etc.The second led to undertake national, provincial and ministerial focus, and major projects.

At the same time, Yuyue Medical has established a close -up relationship between industry -university -research and research institutions and scientific research institutions. It has laid a solid foundation for product research and development around the fields of respiratory oxygen, diabetes management and POCT, and won praise from market and industry.In recent years, Yuyue Oxygen has won the "Manufacturing Single Championship" of the Ministry of Industry and Information Technology, and Yuyue ventilator has won the "China Patent Gold Award". During the global anti -epidemic, Yuyue provides innovative products and solutions for more than 90 countries.

Accelerate the construction of intellectual manufacturing and talent, build an innovation system

In order to promote digital and intelligent upgrades, Yuyue has built a global industrialized base in industrial 4.0 and smart factories, covering the intelligent manufacturing plant, digital workshop, flexible production line, unmanned logistics storage, digital user services, medical big dataThe platform, highly connected facilities, highly interoperable systems, highly enjoyed data, and highly integrated formats, which greatly improves its ability to respond to major public health events.

In 2020, Yuyue R & D investment increased by 70.8%year -on -year, and continued to introduce high -level leading talents. Outstanding talents from well -known universities internationally renowned collected fish leaps, and established a talent echelon with a reasonable age structure and a reasonable age structure.Essence

Realize industrial transformation efficiently, protect national health

According to statistics, Yu Yue transformed 90%of innovation results into innovative products.In 2020, Yu Yue launched more than a hundred new products, achieving more than a thousand product innovation.In May 2021, the new product launch of the new product launch of Yuyue Medical Products launched four new products, covering innovative technologies in CGM, breathing, oxygen making, and first aid.

In the future, Yu Yue will carry out extensive research and development technology cooperation at home and abroad, transform foreign advanced technology into its own advantages, continuously promote technological research, form a number of innovative technology technology and standards, and achieve the transformation of innovative results in China.Make new contributions to the advancement of industry scientific and technological progress and protect the lives and health of the people.