Sys_Tawanna's Articles

1. Is the Nutritional soil for planting vegetables?

Nutritional native dishes are not poisonous.Nutritional soil dishes are not poisonous. The composition of nutrient soil is perlite, vermiculite and Fertilizer.It can provide sufficient nutrients for the soil. Vegetable leaves will grow more green. Planes can strengthen the breathability of the soil, strengthen the absorption of the roots of the vegetable leaves, drainage the rainy season, and effectively promote the growth of vegetables.

When the Nutritional soil is used, it needs to be stirred with the soil after use.Put the Nutritional soil into the bottom of the Flower pot and cover a layer of thin sand to avoid direct contact with the seeds and vegetable seedlings.The nutrient soil is sufficient, and the use of directly can cause burns at the root of vegetable leaves.After planting vegetables, watering is required to promote the absorption of the root.

When planting vegetables indoors, the soil needs to be guaranteed. The soil contains a large amount of bacteria and heavy metal substances, which will breed a lot of bacteria.After soaking the soil with potassium permanganate solution, it is necessary to use sterilization and disinfection treatment, and use some larger containers to meet the growth space of vegetables.

When planting vegetables, it is necessary to ensure that the sun is sufficient, and the vegetables can be maintained on the balcony.Insufficient light, the leaves of the vegetables grow slowly, the leaves become dry, apply fertilization in time, and make a good nutrient supplement for the soil.vegetables need to be watered in time to ensure the moistness of the soil and make up for water to replenish in order to promote the growth of vegetables.

2. Can vegetables only use Nutritional soil?

If it is a special Nutritional soil for vegetables, then vegetables can also be used to use Nutritional soil directly.However, most of them are general nutrients on the market, so Nutritional soil dishes cannot be used alone.Nutritional soil was originally used for flowers and grass. It contains a Chemical Fertilizer with high nutritional ingredients. Some alkali is relatively strong. It is not suitable for seed growth to germinate, or tender seedlings. It is not easy to burn the seedlings.Nutritional soil should avoid direct contact with vegetable seedlings, otherwise it will cause roots.

three,Nutritional soilWhy plant vegetables, vegetable seedlings will die

Nutrition soil can make plants stronger and produce more vegetables.This is because the Nutritional soil is fertilized by scientific formula, and the nutrition inside is completely reasonable.This is like breeding households to gain weight faster than feeding livestock and poultry fed with feed.Due to the configuration of Nutritional soil, it costs more time and work. Generally, Nutritional soil is only used for vegetable seedlings.Most of the dishes caused by Nutritional soil dishes are due to the problem of fertilization and watering.

1. Outdoor folding knife or straight knife

1. The advantages and disadvantages of straight knives

The knife, as the name suggests, is a knife that will not be folded.Therefore, the straight knife is different from the folding knife. It does not have a connection point, and the handle is integrated with the blade.It is for this reason that the straight knife is much stronger than the folding knife, especially the whole keel's straight knife.

The connection point on the folding knife greatly weakens the solid of the Tool.The sturdy straight knife can be used for Outdoor tasks such as knocking, fire, leverage, hammering.However, in terms of carrying, the straight knife has the advantage of folding knives.Straight knife requires a strong and reliable scabbard to store tools.Another disadvantage of a straight knife is that they are heavier than folding knives.

2. The advantages and disadvantages of folding knife

The blade of the folding knife can be folded into the handle so that the folding knife can be carried in the pocket.This method reduces the size of the Tool and hides a sharp blade.However, the main axis link point in the folding knife also has disadvantages. When the pressure applied is too large, it may break.That is, why can't you use the folding knife for any reason in the wild.

The main advantage of the folding knife is that it is easy to carry and use comprehensive use.However, if it is Outdoor survival, it is not recommended to use a folding knife.Because the folding knife is not strong enough and reliable, it cannot become the main survival Tool.

Therefore, for daily use, a small fold is good.For Outdoor use, remember to use a straight knife, straight knife is always a safer and stronger choice.

2. How to choose Outdoor survival knives

1. Size selection

A straight knife suitable for Outdoor survival should be 10-15 cm in length.The size of the Outdoor knife should not be too large.The too long knife will lead to the overall weight of the knife. It takes physical strength to take it in the hand and occupy the space in the bag. It is not flexible and laborious to use. It is not conducive to long -distance Outdoor survival adventures.Not too small.Although the palm knife is easy to carry, it is not very useful.Cutting branches and cutting ropes are more laborious. It is easy to break accidentally, and it is very ribs.In comparison, medium -length knives can do some relatively fine tasks, but also be competent for some heavy tasks.

2, knife type selection

A whole keel's straight knife is the best choice for Outdoor knives.The knife of the folding knife can be folded into the handle, which is more safe and easy to carry.But this biggest advantage is the biggest disadvantage for Outdoor survival use.As we all know, as long as it is stitching, it will be more likely to cause damage.The folding knife's hollow handle and folding shaft are obviously weak parts that are easy to break.There is no integrated knife body for activity components, which is obviously more suitable for Outdoor survival.The straight knife of the keels is better resistant, can withstand greater use intensity, the overall force is more balanced, and it can withstand high -intensity use.

3. Blade selection

It is best to choose a bladeless blade.Although there is a jagged blade, although it looks very cool, this design is very bad for Outdoor knives.Although the tooth blade can help a little on the cutting rope, but in addition, this design is very "dragging the legs": if the tooth blade is blunt, you need to use a specific grinding Tool to polish, one groove, and a groove.It is very troublesome; at the same time, the Outdoor knife with a tooth blade has also been greatly reduced, because the tooth blade cannot do anything else except cutting the rope.

4. Handle selection

For the choice of the handle, remember two words: non -slip, comfortable.The anti -skid of the Outdoor knife handle is very important. This allows you no matter what kind of environment you are, you don't have to worry about the sword on your hand suddenly slipped away.As for the grip comfort of the handle, you can only try to try the feel when choosing a Tool.

5. Material selection

Compared with other materials, Damascus Steel's knife is rigid and soft, and the blade is better.

[basketball shoes] What should I do? How to step on basketball shoe cushion

What should I do if the air pads of basketball shoe burst?

Netizens answered 1:

Find a glue bar that supplement the vacuum tire to repair the motorcycle, and then cut it a little.The blade is cut off the excess rubber strip, (the specific method can refer to the method of replenishing the tire of the tire) and then get angry.Note: Don't make the leaky hole bigger!Intersection

You can use the needle of the syringe to insert from the place where the air leaking.It feels, superb.In addition, I am the first to add, and then the rubber strip of the stuff, how to operate it with you.

Netizens answered 2:

Just inject it with glass and seal the entrance.

Netizens answered 3:

Find a professional sports shoe nursing shop in time to replenish qi and stick to the bottom.

How to step on basketball shoe cushion

Netizens answered 1:

Stepping on basketball's shoe cushion is to make the air cushion softer a little bit, not so hard!Generally, the road is crushed, and the ball will be stepped on soon. Sometimes it feels like the two athlete cushions feel different.Just wear more.

Netizens answered 2:

The so -called stepping on basketball shoe cushions is to make the shoes more comfortable and more suitable for your foot type. The new shoes are just a bit hard.

Classification and role of air cushion shoe cushion structure

Full palm cushion

The contour is the same as the outline of the bottom, the exposed full palm cushion is opened, and the air chamber binds to the edge of the bottom is about the thickness 10-20mm , Wall thickness 1-1.4mm , soft and high elasticity; the thickness room in the middle is small, about 2-6mm , Poor elasticity, support the beam support; the thickness of the middle solid part is about about 2-3mm , Starting the role of connection.The thinnest part of the forefoot is generally 10 Millimeter, the thickest thickness of the rear is general 20mm The entire air cushion follows the front palm is a wedge -shaped structure.The thickness of the edge of the hidden full palm pads is generally 1-1.2mm The thickness of the gas room is generally 2-4mm The thickness of the solid part is generally the same as the thickness of the edge 1-1.2mm Essence

The structure of the window opening series is still the following 3 kind:

1 The gas chamber of the fate is a overall structure;

2 The Yuanqi Room is disconnected from the metatarsal toe joints to 3 A gas room;

3 2. Disclosure at the parts of the pronged toe and the waist socket, and the entire edge is divided into 6 A gas chamber, the thickness of the gas room in the waisthouse is the thickest, which can be achieved 23mm It can be both shock absorption and supporting stability.

Half palm cushion

From the metatarsal toe joint to the back and the parts, the thickness of the gas chamber at the waist socket is the thickest part of the entire air cushion. It is the same as the design function of the full palm cushion.The thickness of the gas chamber at the waist nest 20-25mm Later, the part is average 18-20mm The design size of the middle and solid parts is the same as the size of the full palm cushion.

Relax

After the air cushion structure, various shapes and rich colors, it is the most commonly used air cushion design.There are many common shapes: the following:

1 , The overall shape is similar to the back palm of the human foot. The differences in each structure are mainly partially changed: the edge part is a pipe gas chamber, and the middle part is solid;The solid round, oval, semi -circular or other solid parts of the shape are disconnected from the waist socket, and the remaining design is unchanged;The air cushion design; just a thin airbag similar to the back and shape, without other embellishment, is a hidden air cushion design.

2 The shape of the projection is similar to a rectangular: the thickness of the gas room on both sides is large, generally 15-20mm , Wall thickness 1-1.2 mm ; 3-6mm , Wall thickness 1.2-1.5mm ; 2-3mm EssenceThe entire air cushion is like a rectangular gas bag. The air rooms in the middle and sides are the same thickness and the wall thickness is the same. It is connected to the air chamber on both sides. There is no solid part.Essence

3 , Ovate air cushion: For two sides of the heels or waist sockets, each shoes are used for two, and one waist socket is used.The specific structure changes are as follows 2 kind:

The middle of the air cushion is evenly distributed with two to three air columns.

The entire air cushion is composed of two airbags connected to the column -type gas chamber without the air column.

4 Pipe -shaped air cushion: The Tube Tube process is used. The materials generally use polyvinyl chloride and thermoplastic polyurethane. The color can be changed according to the changes of the need.In different parts, such as the two sides of the front palm, the back, or the back of the whole, or the whole circle.

5 , Oval cushion: It is divided into two types of design: open window type and hidden type. The open window design has air columns. The hidden type is just a airbag. It can be filled with gas or liquid and other liquids such as oil.

6 Round air cushion: Generally, it is a hidden design that can be filled with gas or poured liquids such as oil.

Ahead air cushion

Substable, shock absorption and rebound elastom 2 kind:

1 , Similar to the shape of the feet: specially designed at the plane toe joint, the rest are the front palm of the full palm cushion.

2 , Tube -shaped air cushion: The Tube diameter is small and the air cushion is small, and the rest are the same as the Tube air cushion.

Limo air cushion

Thicker, support and stabilize.Most of them are hidden, ovate, and air -free design; can also be a Smooth rhombus -shaped edge, which is closely fitted with the waist socket.

Nike several different structured air cushion shoes

The thermoplastic polyurethane air cushion adopted by Nike is classified as:

Underwater cushion soles

This is the earliest air cushion shoes. The outsole of sneakers has a thicker structure, and a series of independent gas chambers similar to hexagonal honeycomb structure can be designed, which can be used for the front palm and rear parts.Honeycomb structure has long been proven to be the best geometric structure in nature, and has the advantages of high strength and light quality. This type of design is very meaningful in shock absorption and lightweight.

Used for the design of the mid -insertion site

This type of air cushion is mainly formed air cushions, and the internal sealing gas or liquid is also the most popular design method of air cushion shoes.The air cushion is generally placed on the back or front palm area.The design of Nike's air cushion shoes is also mainly the mid -plug design.

Insole supporting design

Generally, the air cushion is embedded in the front palm of the insole and the heels that emphasize shock absorption. You can place the air cushion on the top or below of the active insole as needed, and contact the foot directly. The comfort is obvious.

How to put it in the camel Tent

1. First move all the items in the Tent, and then unlock the four spring buckles from the Square Tube eyes so that the Square Tube can move;

2. Two people stand relative and stand on the vertical folding of the canopy bracket to ensure that when they are working hard, the top canal bracket can be folded;

3. Then each person holds the two brackets of the Tent in both hands, push the bracket in the direction of the opponent, and fold the Tent bracket;

4. After folding to a certain degree, you can remove the Tent fabric and place it on the ground;

5. Dry the dirt and water stains on the surface of the tarpaulin, and then fold them and put them in a dry place.

6. Finally, remove the top of the canopy, collect the brackets of the four feet, and push the inner Tube, so that the Tent is put away.

How to collect the camel brand automatic Tent

Step 1: Lift it with a solution, that is, the head of the Tent is lifted to lift the fixed head, unbutton the security buckle on the bracket, and fold the Tent.

Step 2: Press and one fold, that is, hold the bracket with both hands and press the bracket to reduce the Tent, and fold the four corners of the bracket inward in order. After the folding, the Tent is stored.

precautions for Camel Tent storage

1. In addition to cleaning the dust and attachment in time after use, the Tent should also wipe the water and gas on both sides of the fabric.This is very important.If it is stored without completely dry, it is easy to make the fabric mildew and adhesion.Affects the life of the Tent.

2. After the Tent is completely dry and folded, try not to put other items on the Tent, so as not to cause permanent fatigue at the bending of the waterproof rubber material to produce dehydration.

3. Take out the Tent to cool out the Tent regularly (avoid direct sunlight) for a long time and reorganize before folding and storage. This advantage is that it can prevent the mildew and adhesion of the Tent fabric, which can make the Tent bend the waterproof waterproofPressure strips will not produce permanent fatigue and extend the overall service life of the Tent.

Camel Tent recommended & gt; & gt;

1. The correct way to ride a helmet

cycling motion is also called a bicycle motion. It is a kind of sport that uses bicycles as a Tool race. As a sport, it is important to do a good job of safety protection.The safety of the head can also reduce the resistance through special design and improve the rider's achievements.However, the Bicycle helmet is not just worn casually. You also have to master the correct method of wear. So how do you wear a cycling helmet?

1. Open the band and sort out other accessories of the riding helmet to facilitate wear.

2. Put the level of the helmet on your head and slowly tighten the bundle until you feel comfortable.

3. Adjust the band below the ears and adjust the position of the band.

4. After the band is adjusted, tighten the band close to the chin and buckle the bundle band buckle ring.

5. After completing the above operations, make sure that the range of the helmet movement does not exceed 1 inch (1 inches = 2.54 cm). At the same time, it is guaranteed that the helmet without loosening the front helmet will not fall off and it means that you can wear it.

2. What are the precautions for wearing Bicycle helmets

1. After the helmet is worn correctly, it should be ensured that the front of the helmet should be a horizontal line above the eyebrow heart. The two sides are close to the temples, and the position of the helmet is not impartial.

2. Most out of control and collision are fell forward, so the helmet's wearing angle should not be too much leaning, the front of the helmet should be pressed to the eyebrows, do not expose the forehead, but too much forward will cover the sight.As a result, the helmet fixed mechanism cannot be well fixed, and it is easy to cause a helmet to move or wear uncomfortable in the bumps.

3. The buckle position also has a direct impact on the comfort of the helmet. The correct position of the "Y" font buckle should be located at about 5-10cm below the ear.Tighterness will affect comfort.

4. After wearing a helmet, you should pull down the loose regulator in the back of the head, so that the regulator can fully wrap the back of the head and then adjust the tightness.Then, the twisting knob allows the headband to give a certain pressure beam and tighten the head. It is better to shake the helmet with both hands without loosening.

5. The tightness of the band of the chin is based on the standard of one finger, and Taisong will not be able to fix the position of the helmet.The helmet needs to be worn correctly to exert its greatest effect.

6. Regardless of whether or not you fall or collide, the cyclist should change the riding helmet every three years.Because even if the helmet has not collided, the sun exposure and sweat erosion can make the safety beam band aging, thereby weakening the surrounding fitting system and damaging the protection performance of the helmet.

3. What are the principle of protection of a helmet

The principle of cycling helmet is to play a protective role by absorbing the impact of collision in the inner layer of the foam. Each cycling helmet hasMaterial orEPP (foam polypropylene) foamIn the inner layer, when the accident occurs, the inner layer of the foam will buffer collision to reduce accident damage.

It should be noted that the cycling helmet made of EPS (foam polystyrene) material, once the EPS bubble is crushed and deformed in the accident, it cannot be recovered and reused.The inner helmet made from EPP (foam polypropylene) foam can be restored to use again after being hit, but the intensity of its absorption impact is far less than the EPS bubble. ThereforeRiding a helmet, after all, safety is the first.