1. How to install the Luya water drop wheel

The method of launching the Luya water droplet wheel is very simple. The specific operation is to first pass the fishing line through the wire ring, then tie the fishing line on the online cup, and finally shake the handle to wrap the fishing line around the online cup.It is worth noting that the line cannot be installed too full. Generally, it is recommended to load the lines of the line cup is about 1.5 to 2.0 mm. The fishing line is too full of throwing.

2. How to adjust the Luya Drop Wheel will not bomb the line

To adjust the Luya water drop wheel to avoid the frying line, you can follow the steps below:

1. Mechanical braking adjustment:First adjust the mechanical brake. This is usually located on the side of the rocker arm. The mechanical brake is adjusted to the critical value of shaking and not shaking from the left and right of the wire cup. This goal can be achieved by fine -tuning the knob.

2. Magnetic braking adjustment:For magnetic brakes (commonly in water drops), the brake strength can usually be adjusted through the numbers on the knob. The larger the number, the stronger the brake power, the more stable the throwing.Gradually reduce the gear until the appropriate gear of the non -fried line is found.

3. fish line match:Choose nylon or woven wires to avoid using carbon lines because the carbon line is hard and easily leads to frying lines.

4. Wire shaft fine -tuning knob:Adjust the line axis to fine -tune the knob to ensure that when the fake bait is free to bottom out from the tip of the pole, the wire cup does not bombard the wire.

5, disclosure adjustment:Adjust the disclosure knob to ensure that the thread cup is properly loose during the throwing process to prevent bombing.

6. Practice throwing:When practicing throwing, pay attention to the movement of the thumb pressure cup. As the skill improves, the brake gear can be gradually reduced to achieve the best throw distance without bombing.

Through the adjustment and practice of these steps, the situation of the line can be effectively reduced or avoided.

1. precautions for buying GPS navigation equipment

1. Look at the effect and workmanship of the car navigation instrument.Observe whether the screen display is clear, whether the operating response is sensitive, the accuracy is good or bad, whether it is a capacitive screen or a resistance screen. The cheap product is generally a resistance screen, and the response speed is slower than the capacitive screen.See if the screen and the body joint are connected tightly, and the gap is not a good product.After turning on the side, do you have light leakage on the screen.

2. Select the navigation product with the built -in map with the "China navigation Electronic Map Qualification Certificate".Many manufacturers now do not have the "Chinese navigation Electronic Map Qualification Certificate", and they are also providing map navigation. Many navigation errors have occurred.

3. Is it the latest?Be careful to sell the eliminated car navigator product. It is best to ask before buying.The latest is the four -generation chip and autonomous chips, such as Garmin.

4. Finally recognize the anti -counterfeiting logo.Free upgraded genuine maps generally have anti -counterfeiting signs on the body's body. When the owner and friends buy a car navigator, you can query according to the phone, website, etc. on the logo.

Second, buyGPSSix major precautions for positioning monitoring equipment

1The stability of the product

First of all, consider choosing strong anti -electromagnetic interference and stable performanceGPSPositioning monitoring products.When you encounter bumps, high temperature, and electromagnetic interference, the poor environment in the car will affectGPSThe operation, so the stability of the product is particularly emphasized.

2, To pick up operators

It is necessary to consider choosing operators with strong networks and sustainable development to prevent the network coverage from being too small or not to get reliable follow -up services due to the failure of the company.

3The aesthetics of the product

GPSPositioning products are generally hidden installation, but high -end products are usually attached to car phones (handles). When buying, you must also consider whether the handle is fashionable, whether the shape is beautiful, whether it is coordinated with the front board and the color of the interior.

4, Differential module level

GPSThe module is divided into two Levels, civilian and industrial.Industrial -level modules have stable performance and relatively expensive prices; civilian -level modules have poor adaptability to the environment, but the price is relatively cheap.Consumers should consider cost -effectiveness.

5Safe energy transportation

GPSThe energy consumption is large, you should set it upGPSSpecial power supply prevents the failure of the circuit due to the unstable electro -frequency electrom frequency in a poor environment in a poor environment.The traffic volume of the car connection line is large, and the ordinary connection line is easy to burn. The quality of the connection line must be better to ensure reliable and safe.

6Doing force

The current good products are expensive,GPSThe price is generally the first installation fee plus50-100Yuan's monthly rent fee.Economic cars do their main force.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

Common basketball shoes slow shock technology

1. Abzorb -New Balance

The shock absorption materials developed with DuPont can absorb more than 99%of the ground reaction force, avoiding the improperly reaction force of the spine, knees, and ankles, causing exercise damage.At the same time, convert the absorption of countermeasures into the advancement of the next movement to help save energy.

2. adiprene

Adiprene is made of EVA materials for re -arranged molecules after high temperature decomposition. It is usually placed and placed in areas where you need buffer to enhance the stability and protection of your feet. It is a common rear palm vibration technology commonly used in Adidas.

3. adiprene

Compared to Adiprene, this guy with a plus number is more flexible. It is often used in the forefoot area. It not only has excellent cushioning performance, but also the elastic performance helps the feet to be faster during the startup process.

4. Air

Nike developed professional sports shoes slow shock gas cushion.The main type of aurtex is used to create a airbag wall. Among them, filling high -pressure special macromolecular gas is often placed in the bottom of the sneakers.When the air cushion is impacted, it can quickly buffer and has the characteristics of light quality and plastic.Over time, Nike Air has also evolved various upgraded models, which has always been the mainstay of Nike sneakers cushioning technology.

5. Air Sole

AIR Sole, which was released in 1979, was the original form of Nike Air. It was made into a tough synthetic rubber layer in a high -pressure manner and placed it in the midsole to achieve the purpose of cushioning.Nike Air Tailwind is the first sneakers with Nike Air air cushion.

6. Air Max

In 1987, the birth of Air Max 1 not only increased the capacity of the cushion, but also showed this mysterious black technology in a visible way.

7. Blade -Blade

Adidas devoted to a new midsole cushioning system developed for 6 years.The traditional EVA midsole structure is abandoned, and multiple polymers are arranged in the shape of "blade", which has a strong energy feedback effect.

8. Blow Molded Air

Blow plastic air cushion.The low -voltage Air Max air cushion is integrated into the support structure and the representative shoes are Air Jordan 16.

9. Boost

Boost is the product of ADIDAS and the global chemical industry giant Germany BASF Chemical Corporation in cooperation in 2007.TPU (plastic polyurethane) is split into thousands of micro -energy capsules like popcorn, so that it has a very strong rebound effect.

10. BOUNCE

In the early days, adidas Boundce used the -type TPU midsole to cushion and rebound. Representatives of the shoes include Garnett's Adidas Bounce Garnett 07 and TS Bounter Commander.In recent years, Boundce has changed its domineering appearance and evolved into a mid -bottom EVA cushioning material, representing the shoes of Lillard's new boots DAME3.

11. C-CAP

New Balance compressed the multi -layer EVA foam into the midsole inverted mold, so that the midsole has a soft cushioning function.

12. Cage Zoom

External visible Zoom Air, with a larger capacity and an excellent cushioning performance.Represents shoe Zoom Miller, LeBron 2, etc.

13. Cell

Since PUMA Trinomic, Puma has launched a improved version of the honeycomb air cushion Cell. Depending on the force, the size and thickness of the midsole hexagonal honeycomb airbag have been adjusted.

14. CHARGED CUSHION

As the current UA's main cushioning technology, the Charged cushioning squeeze the EVA density and adjust it, converts the impact force when landing into the explosive power, bringing a softer cushioning experience.

15. Dynamic Motion X (DMX)

Moral cushioning airbags.DMX is an airbag cushioning technology developed by Libu.Early, including DMX6, DMX10, etc., the number represents the number of airbags.DMX Mega, DMX Micro, etc. also appeared later.Due to the limitations of technology, the initial feeling of DMX is surging, but with the passage of time, it will occur in dryness and leakage.In particular, the DMX Ride and DMX FOAM launched in the later period have different concepts of the early DMX liquid airbags, and become the midsole structure of cushioning glue.

16. Feet you wear

Tiantia is an adidas a sports shoes design concept, first in 1997.From EQT 2000, which is used in the first pair of "Tiantia" technology to end to the end of KB8 III, the "Tiantia" technology has experienced the end of only 8 years of history.The technology of technology requires the authorization of the ownership company. Because the renewal fails to reach an agreement, the classic little face today has become the most nostalgic sign for shoes fans.

17. Flight Plate

Place a tough PEBAX buffer plate above the Zoom cushion. In strenuous exercise, the pressure of the feet is concentrated on the PEBAX and then applied to the ZOOM area to achieve a larger air cushion rebirth and sensitivity.Because this technology is to obtain a larger air cushion deformation space, the UNLOCKED ZOOM air cushion is used, so that the problem of air cushion drum Bags may occur during the process of wearing.

18. Hexalite

As Reebok's most traditional cushioning technology, Hexalite is composed of countless hexagonal hives. When it is impacted, the hive wall will rely on its own hexagonal structure to contrast and rebound, playing a buffer role.At the same time, because it is also a air cushion method, it has the characteristics of light quality.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. Can Ski shoes be washed? How to wash

Ski shoes are indispensable skiing tools, because skiing technical movements need to be done by wearing Ski boots. After wearing several times, the surface of the shoes will inevitably stain. If you produce a odor, can Ski shoes be washed? How can I wash it?

Ski shoes can be cleaned. Specific methods: First use a soft brush to brush the surface of the shoes, and then wipe it with a wet towel. Apply one direction, of course, some shoe powder will fall. This is the first time. After all wipe it, brush it with softly, so that the Flour will be covered evenly, and the other on the surface of the shoes will also be affected. clean up.Then apply the shoe powder again, and add the place where there is no uniform in front. If you need it, you can use it The soft brush is properly applied to the brush evenly.What needs to be reminded is that you cannot clean the inner liners of Ski shoes, take it out to dry, and then put it back.

2. Can Ski shoes be blown with a hair dryer?

Ski shoes can be blown with a hair dryer, but you need to pay attention to methods and safety. It is recommended to use cold or low -end hot air to avoid high temperature damage to the upper and materials.

1. First of all, it is important to choose the right hair dryer mode and temperature.Generally speaking, it is recommended to use cold or low -end hot air for drying.Because too high temperature may cause the upper and internal materials of Ski shoes to be damaged, and may even cause hidden safety hazards such as fire.Therefore, when drying Ski shoes, you must avoid using high temperature or strong wind.

2. Secondly, we need to loosen the laces of Ski shoes so that the air can flow inside the shoes.In this way, the hair dryer can more effectively scatter the moisture inside the shoes and speed up drying.At the same time, we also need to pay attention to keeping the hair dryer from a certain distance from Ski shoes to avoid excessive distances that cause too much calories and damage the shoes.

3. In addition, in order to ensure the drying effect of Ski shoes, we can also consider using some auxiliary tools.For example, some desiccants or newspapers can be placed inside the shoes to help absorb the moisture in the shoe.At the same time, put shoes in a good ventilation place, it also helps to speed up drying.

4. It should be noted that although the hair dryer can dry the Ski shoes, it does not completely replace the natural drying.Therefore, in the case of conditions permit, we still recommend that the Ski shoes are dried naturally as much as possible.This can better protect the material and performance of the shoes and extend its service life.

Third, Ski shoes daily maintenance and storage method

The daily maintenance of Ski shoes also needs meticulous care.After each skiing, make sure that the buckle of the Ski shoes is fastened to keep the shoe shape.If there are snow in the Ski shoes, remove the inner shoes and wipe it separately, and dry it naturally in the warm place. Do not use heating or stove to bake to prevent the outer boots from being heated.After the snowy season is over, completely clean the inside and outside of the Ski shoes and dry it.In order to keep the shoes dry, it can be plugged into the newspaper and exhibited in a dry and humid place.Such daily maintenance can ensure that Ski shoes are in the best state and extend their service life.

1. sports shoe size description

Chinese shoe numbers and several main shoe numbers in foreign countries:

1. The formulation of Chinese shoe numbers: The shoe number based on the length of the feet, one unit (code) is about 6.35mm.

2. Several representative shoe numbers in the world:

Method code: Calculated according to the inner bottom length, 1 number length is equal to 6.67mm;

British code: calculate according to the inch -length inches, 1 inch = 25.45mm;

Code: The size of the United States also takes the inch as the unit, with a length of 9.00mm;

Daily code: The Japanese size takes centimeters as the measured unit.

2. Is leather shoes the same as sneakers?

The difference is that the leather shoes will be the smaller than the sneakers. The specifics are as follows:

1Because leather shoes are formal shoes, the number of codes is definitely produced according to the standard code of most people's feet, so that when people can wear it, they can look more beautiful as a whole.

2And sneakers are used to wear during leisure, so the design will be relatively loose, so that the feet can be released well during exercise.This also determines that there is a difference in the number of sneakers and leather shoes.

3sports shoe code is generally large, which is very suitable for all kinds of people to wear.But leather shoes are not necessarily, because everyone's feet will be different, length and width thickness, etc. These must be considered. The leather shoes should be suitable for the foot.The leather shoe code is different from a few millimeters from the sneakers.Relatively speaking, it is a number.

3. precautions for the purchase of sneakers

1. Longer shoes

(1) The soles of the feet are large, and the Bone bones are exposed to more people

(2) People with sweating a lot of feet

(3) The toes are almost side by side into people

(4) People with heavy weight

(5) People who are growing or older

(6) People walking a lot

(7) The slender shoes on the design

(8) design the pointed shoe of the toe

2, Dont lengthen too much shoes

(1) The bending of the feet is small

(2) Light weight

(3) shoes with higher heels

(4) design fattened shoes

(5) design shoes with wider shoes

Furthermore, pay attention to the shoes itself, and then consider other factors:

(1) The hard, soft, thick, thin, telescopic degree of materials.

(2) The shoes themselves are low, high -top, high -heeled, and lace.

(3) Consumers' hobbies, age, habits, occupations, etc.

Usually choose sports shoes to choose shoes length (generally refers to the length of the midsole).1.5-2.0About a cm.

3When buying sneakers:

(1) Put on the socks worn when you perform this exercise or socks of the same thickness.

(2) Ten the shoelaces and adjust the tightness of the shoelaces appropriately, so you can feel whether the footability of the shoes is ideal.

(3) Buy a moderate soft insole.

(4) The weight of the shoes should be light, and the heavy person can easily make the wearer feel a sense of falling off and easy to get fatigue.

(5) Don't open your shoe mouth, otherwise you will easily fall off when you wear it and are easy to get sick.

(6) Check the rear heels of the shoes to avoid high or hard rear follow -up design.

(7) The upper and soles of the shoe are soft and easy to bend. If it is too hard, it is not easy to bend, and it is easy to fatigue.Use squatting position when trying to check whether the bending of the shoes is good.

(8) Pay attention to the height of the shoe mouth and consider the position of the ankle Bone, otherwise it is easy to rub the Skin when wearing.

(9) Check whether the heel height of the sole is higher than the forefoot part, because the human feet are used to this method, the height height should not be too high, and pay attention to whether the heels use the air cushion or texture.

(10) The seams inside the shoe should be good.

(11) Try to wear sports shoes, wearing it a few steps, it is best to alternate the weight of the whole body to each foot, check whether the toe has enough space to accommodate the feet slightly stretched due to pressure.

(12) Outdoors need to be designed in thick and consumed sole, which is not easy to slip, and indoor shoes require flat shoe soles.

(13When buying shoes,,It is best to arrange in the afternoon to avoid buying shoes in the early morning, because the feet will be smaller at that time.

(14) According to different sports purposes and venues, choose compatible sports shoes.