Sys_Vania's Articles

[Types of folding bed] What are the types of folding beds in the folding bed?

What are the types of folding beds

1. The type of common folding bed

According to different materials, the folding bed can be divided into the following types:

Wooden folding bed, steel wire folding bed, canvas folding bed, sponge pad folding bed, free assembly folding bed, electric folding bed

According to different uses, the folding bed can also be divided into the following types:

Outdoor military bed, office lunch bed, home folding bed, hotel bed

2. Types of lunch breaks in the office

If you do nt sleep at noon, it s really difficult to guarantee the effort in the afternoon. In the face of a variety of office lunch beds, and the price of lunch breaks in the lunch break.The lunch break in the office is made of different materials, but it is made of nylon cloth, polyester cloth and other synthetic wear -resistant cracking materials.Some of them are slightly better and they pay attention to the massage of the head.

The lunch bed in the office is generally folding beds. It can be divided into wooden folding beds, steel wire folding beds, multi -function folding beds, lying chair folding beds, etc.

General nylon cloth and polyester cloth -based office in the lunch break is about 100 yuan ~~ 200 yuan.The higher grade, better style and material, about 250 ~~ 500 yuan.The price of luxury can reach 800 or thousands of yuan.

Because the time of noon break is not long, the types of lunch breaks are not high. The price of lunch breaks in the office is generally acceptable. You can definitely find your own office lunch break.

What kind of material is good for folding bed?

1. bamboo folding bed

First of all, the specifications of the bed body should not be too large. The narrower the internal stress, the smaller the internal stress, and the more stable.Secondly, it is necessary to control the water content to about 8%, which will increase the stability of the bamboo board.Again, the bamboo board is not the older and better. The best bamboo materials should be 4-6 years. Too tender and too old will affect the stability of bamboo boards.

2. Wood folding bed

Wood is afraid of tide and insects, so living in high humidity areas, you should pay special attention to selecting wood with high oil -containing and better moisture, such as teak, beylum, South American rosewood, etc.Such as wood furniture with paint and moisture -proof protection.Note that the interface of heavy furniture components should be tightened or glued replenishment at the interface of heavy furniture components; touch the surface of the furniture by hand to see if they are Smooth; carefully check whether the surface of the bedboard is defiled.Not evenly, whether it has any cracks, etc.

3. Metal folding bed

First of all, on the coating, the chrome part of the coating should be bright and Smooth, and the light can be learned.The plating can not be foaming, rust, should not be exposed, and must not be scratched; there is no falling on the surface, no pimples, no wrinkles, no rust points, Smooth and delicate, and moist, Metal Tube parts should not have stack, cracks, welding, and pit.The riveted part should not be loosened, and the rivet garden head and the surroundings should be Smooth without smashed marks or burrs;

4. Oxford cloth folding bed

Oxford cloth with good quality should have the advantages of light texture, soft feel, good waterproofing, and good durability.The metal Tube part should not be stacked, cracks, welding, and pit.The riveted part should not be loosened, and the riveting garden head and the surroundings should be Smooth without smashing or burrs.

Electroplating Sterstory Selection Purchase Guide

1. Product structure

The electroplating goggles are mainly composed of three parts: lens, frame and nasal pad.The lens should be anti -fog and ultraviolet prevention, so as to keep clarity and avoid sunburn.The frame should be durable and not easy to deform, which can be used for a long time.The nasal pads should be soft and fit the bridge of the nose, which can reduce the impact of water flow.

2. How to choose the product

When choosing an electroplating goggles, you need to consider your face and eyes, and choose the appropriate size and style.Secondly, pay attention to the material and quality of the swimming moster, and try to choose soft, durable, and waterproof materials as much as possible.Finally, you also need to consider the additional functions of the product, such as whether there is a degree, whether it is equipped with anti -fog coating, etc.

3. Product advantage

The electroplating goggles can effectively prevent water from entering the eyes and avoid eye irritation and infection; secondly, it can provide better sight and comfort; in the end, it can protect the eyes from ultraviolet damage.

4. Use scenarios

The plating goggles are suitable for various swimming scenes.Whether it is Outdoor swimming or open waters, you can use electroplating goggles.In addition, the electroplating goggles can also be used in water activities such as diving and underwater photography.

precautions for electroplating swimming mirror selection

1. Size and adaptation

It is very important to choose an electroplating goggles suitable for your size. Make sure that the swimming moster can completely cover the eye area without having a discomfort.When trying to wear a swimming mirror, make sure they fit the facial faces tightly, but it will not be too tight or cause discomfort.

2. waterproof performance

High -quality electroplating mirrors should have good waterproof performance to prevent water from water and keep their eyes dry.When buying, you can check the sealing performance and waterproof design of the goggles to ensure its effective waterproof.

3. Leeper type

According to personal needs and preferences, choose suitable lens types.Common electroplated swimming lens types include ordinary lenses, myopia lenses and anti -fog lenses.

4. UV protection

Choosing a Swimming goggles with UV protection function can effectively block the damage of ultraviolet rays to the eyes.Generally, electroplating goggles have the function of anti -ultraviolet prevention.

5. Material and durability

High -quality electroplating goggles are usually made of durable materials, such as silicone or rubber, which has a long service life.Check the material and structure of the swimming moster to ensure that they are firm, soft and comfortable.

6. Anti -fog performance

Anti -fog performance is also a factor that needs to be considered when choosing a plating goggles.Although the anti -fog effect may weaken over time, choosing a Swimming goggles with anti -fog function can reduce the problem in this area.

7. brand and model

It is best to try swimming moster before buying to ensure its comfort and adaptability.If possible, consult a professional sales staff or swimming coach to recommend suitable swimming mirror brands and models according to your needs and Levels.

8. Vision

Different Swimming goggles may provide different vision range.When choosing a swimming mirror, you can choose the appropriate field of vision according to your needs and preferences.Generally speaking, a wider field of vision provides a better viewing experience.

How to choose the electroplating goggles

1. Comfortability

The comfort of the electroplating goggles is very important, especially when swimming for a long time.Before buying a swimming moster, try to wear several different models and brands to find the most in line with your needs.

2. Sealing

When choosing an electroplating goggles, observe whether the rubber of the swimming mirror frame is soft and sealing. The inspection method is to embed the swimmers on the eyes when not taking the lead.Fall in good sealing.

3. Anti -fog

The anti -fog is to prevent the fog in the water vapor in the Swimming goggles, which is attached to the lens to block the sight.When choosing, pay attention to whether the anti -fog performance of the electroplating goggles is good.

4. color

There are many color plating goggles on the market now. The color of the Swimming goggles is different, which will affect the light of the object, so it is also important to choose the color of the swimming moster that suits you.

5. Frame size

There are small frames and large frames in electroplating goggles. No matter which type, there will be deep or shallow indentations after we wear it for a long time.The sealing of the small frame of the swimming mirror will be relatively better, but it will press the organs for a long time.The large frame is basically integrated wrapped, which fits the brain, the side of the eyes, and the bridge of the nose, and the comfort will be better.

6. myopia Ding Goggle

If you are myopia, the degree of myopia goggles is 50-100 degrees lower than myopia.To put it simply, you have 500 degrees of glasses you wear, and the myopia swimming mirror is 400-450.

7. myopia astigmatism goggles

If your myopia astigmatism, the degree of mirrors of myopia, half of the number of myopia (50-100 degrees).The degree of myopia is 500, the astigmatism is 100, and the number of myopia goggles can be selected 500 or 450 myopia goggles.

How to use a sight to aim

1. Visual differences return to zero

Newly bought new sights need to complete an important task before use: to zero the vision of the scope to reduce the shooting error and improve the accuracy.

2. school sight

Select the target target 10 meters away, aim at the target heart, take 5 rounds as a set of shooting, and adjust the knob according to the position of the bounce.For example: the bouncing point is distributed at the bottom right of the target heart, adjustable air biased knitting knobs, rotating the knob along the direction of L, so that the bounce point moves to the left in the horizontal direction, until the bounce point is basically directly below the target heart;Rotate the knob along the U direction, so that the bounce point moves slowly upward in the vertical direction until it basically coincides with the target heart.

The method of debugging of the scope

1. Set a white paper target, order a black spot at the target heart, hit the centers centered on the black spots, and then retreat to one hundred meters to set up a gun to fix the table, install the sight on the gun.

2. Remove the bolt, aim at the black spot on the white paper target from the barrel through the refractive mirror, and then hold the gun body, then press the cross from the sight of the sight to the black spots on the white paper target. Tighten it tightened.Aiming at the mirror adjustment knob.

3. The guns do not move in a fixed state, install a bullet with a bullet, and start!

4. Check the bomb point. If you are too upper, you can fine -tune the sight of the sight. If you are partial, fine -tuning, and the left to the left, and the right is fine -tuned to the right.

5. Take another shot and look at it again. Repeat this method until the bounce point is hitting the black spots on the cross on the white paper target, and the sight will be adjusted.

The debugging skills of the scope

1. When aiming, pay attention to the distance of the pupil, that is, the distance between the eyes and the sight, and the pupil distance has two effects. One is to avoid damage caused by the rear power to the human eye when shooting.The person's eyes can get the largest imaging area at the distance of the pupil.

2. When aiming, the human eyeball must be the same as the axis of light aiming, otherwise there will be vision.Aiming errors.On time, the surrounding shadow areas are uniform ring -shaped. The performance of the vision is that the shadow areas around the imaging area are uneven. Once the crescent area appears, the projectile will be biased towards the larger part of the crescent area.

3. There are two buttons in the middle of the sight. There are protective caps on these two buttons. After you spin the lid separately, you can see these two buttons.The button in the middle is increased.For example: there is a UP, one is down, and the direction of the UP will be automatically corrected upward.If you turn in the direction of down, the original bounce point will be automatically corrected downward.UP means upward in English, down means downward.The bounce point is biased down, and the direction of the UP indicator is turned. If the hit is high, follow the direction of writing down.In the knob on the side, the above is written by L, and one is written by R. If you turn along the direction of L, move the point to the left. If you turn in the direction of R, the bounce point will move to the right.L and R are capital of the first letters in English left and right, respectively.

4. Aiming a look at 1/4 inches at the British 100 yards (equivalent to 91 meters).The discounted public system is 6.35 mm.If there are about 30 mm (3 cm) in the horizontal direction of the bounce point and the target heart. If a grid at 91 meters is 6.35 mm.Then the actual movement volume of a grid at 10 meters, a look at the grid, is equivalent to 1/4 inches at the British -made 100 yards (equivalent to 91 meters).The discounted public system is 6.35 mm.There are about 30 mm in the horizontal bomb and target heart. If a grid at 91 meters is 6.35 mm.Then the actual amount of movement at 10 meters is to remove 9.35 with 9.35.Finally, about 0.7 mm.The adjustment amount is 30 mm.With 30 divisions of 0.7, it has to be screwed about 43 blocks.If it is a 30 -meter adjustment of one grid, it is 2.16 mm. If 30 meters 30 mm, it is 13.8 that is to twle out 14 grids.

1. What are the main components of the diving propeller?

Whether you want to spy on the mysterious scene of the underwater world or just like the excitement of diving. In short, you have to swim. With this premise, you can successfully follow the following things.What about the dry duck?Is there any way to make people who do not swim, can I see the mysterious underwater world and get in touch with the creatures living in the ocean?The answer is the diving propeller.

The diving pusher is usually composed of pumps, pushers, and handles.

The pump is responsible for drawing water from the water source to the pusher, and the propeller will launch the water from the propeller to form the water flow. The handle is to let the diver grasp and use the left and right tilt to change the direction of controlling the underwater forward.

What are the functions of diving propeller?

The previous article has briefly understood what the diving propeller is mainly composed of, and then let's take a look at the function of the specific diving propeller!

1. Provide power function

Can provide sufficient thrust so that divers or submersibles can move or move underwater.

2. Maintain stable water flow function

It can provide stable water flow in the underwater environment so that the divers or submersibles can move or operate more secure and stable.

3. lighting function

The diving pusher can also provide certain underwater lighting, enabling the divers or submersibles to operate in a dark environment.

4, extra function

At present, some diving pushers have begun to become more and more intelligent, and have many advanced functions, such as one -click return, one -click floating, mechanical floating, fully automatic floating, etc.

1. How much does it cost to ride glasses?

Riding glasses is the equipment that many friends will use when riding. Good Cycling glasses are very helpful for riding and their own protection. Many friends dont know how to choose the glasses and how much money to buy.Riding glasses is suitable, so what is the price of Riding glasses?

The price of Cycling glasses is affected by factors such as brand, material, processing technology, function, and other factors. It only takes a dozen dollars to dozens of dollars, and it can be done around one or two hundred.Or customized Cycling glasses are generally around thousands of yuan, and three or four thousand yuan products are available.

When choosing riding, you mainly choose according to your own budget. If you are just getting started or considering long -distance riding, you choose an ordinary Cycling glasses. It is about two or three hundred yuan.For friends who are preparing to ride a long -distance ride, it is necessary to buy a good ride glasses. Then you need to consider your budget for choice.

2. What parameters should be paid to when buying Riding glasses

During the cycling process, the sun, wind sand, foreign body, etc. can all cause certain damage to the eyes. Therefore, choose a good ride glasses to protect the eyes. When buying Cycling glasses, the parameters of Cycling glasses include:

1. Structural strength

The larger stones or insects may hit the glasses when riding. If the speed is fast, and the strength of the Cycling glasses is not enough, it is likely to break the glasses and cause harm to the human body.Cause greater damage.

2. Overflow

sunlight and wind come from all directions. If the coverage of Cycling glasses is not good enough, there will be dead ends, and it cannot play a good wind -proof and sand prevention effect.The eyebrows are covered.

3. breathableness

During the cycling process, the amount of exercise is large. If the breathability of the Cycling glasses is not good, it will not allow the heat to distribute inside in time, which will cause mist and affect normal cycling.

4. Fixedness

No matter how good the protective performance is, it is useless if it is easy to fall, so the stability of the glasses on the face is also necessary.

5. Polarized light

That is to use polarizer, light is as directional as water waves. The polarizer can filter the chaotic waves generated after the reflection of the object.Essence

6. Leed color

There are several purposes with the lens plus color. One is to reduce the brightness of the light. The darker the color of the lens, the darker the light; the other is to strengthen the contrast to make the logo, signal Lights or some objects more obvious.The color is related, and there are suitable colors in different environments.Another purpose is to be beautiful and fashionable.