Sys_Vania's Articles

1. The advantages of the overall Wall cabinet

1. Fashion and environmental protection

In the previous home decoration, it was mainly made and purchased the finished products through the on -site woodwork.The former can be tailored, but the quality is not easy to control and inadequate; the quality of the finished product is stable, but it cannot match the home space.The overall Wall cabinet not only absorbs the advantages of the two, but also matches various sizes and changes.In addition, it is a factory production, which is simple and fast installation, saving the time -consuming and troublesome of hand -made, suitable for young people with busy work.

2. Save space

The overall Wall cabinet can be designed according to your needs, and the top space can also be placed in the bedding or toys that are tired of children.Then through the choice of hip -to -door tone through the Wall cabinet, it is integrated with the decoration of the entire room.If your bedroom is large enough, you can also use the overall Wall cabinet to design a step -in cloakroom with a stylish sliding door outside, and a private space is made.

3. Economic and practical

The overall Wall cabinet is not only because of its practicality, but also because of the reasonable use of space, there are many economical.Its cost is calculated based on the area of the cabinet, and different internal configuration prices are different.The total price per Square meter with a total area is the total price.

2. How to install the overall Wall cabinet

1. Measurement of the overall Wall cabinet

The cabinet of the entire Wall cabinet can be both walls, or so sandwiches. Be sure to achieve the top and bottom Levels at the bottom.If there are errors, the height difference between the left and right sides of the hole is required to be less than 5mm. The bottom wheel of the Wall cabinet door can be compensated by the debugging system.

2. Equipment of all Wall cabinet drawers

The cabinets of the entire Wall cabinet generally have drawer planning. In order not to affect the use, pay attention when planning the position of the drawer: When making three sliding doors, you should avoid two intersecting places;On the side of a door; when the folding door is made, the drawer should have 17cm open space from the side wall.

3. Equipment for all wall cabinets

When making the cabinet, the scales of the trajectory must be reserved.

4. Equipment of all wall cabinets

The professional and guaranteed cabinet doors are generally completed by professionals. The process is: fixed top rails, the front of the trajectory and the appearance of the Wall cabinet on the same plane, and the upper and lower rails are placed in a reserved position.Then put the two doors into the trajectory, use the straight degree of the door with a horizontal or straight foot to adjust the position of the upper and lower rails and fix it; check whether the door body is parallel to both sides, you can regulate the bottom wheel to regulate the door body and reach the reach to reachThe border is with the Levels on both sides; finally the anti -jump equipment is fixed and the quality protection book is presented.

3. precautions for the installation of the overall Wall cabinet

1. Before installing the overall Wall cabinet, you must do a good job of inspection. If you find the problem, you need to feedback and solve it as soon as possible.Also carefully check the good drawings to set the installation order.

2. During the installation of the overall Wall cabinet, we must avoid being destroyed by the product component. The beam, the top line, and the corner of the closure plate must be cut to prepare to ensure that it is correct.

3. If there is a problem during the installation process, the installation workers need to fill in the installation notes and do a good job of tracking services.

4. After installing the overall Wall cabinet, you must self -check and adjust it, and then the customer accepts the signature confirmation.

1. How to hook a good -looking mobile phone bag

Material:scissors, hook needles, color matching wool, glue.

practice:

1. First of all, we have 15 needle lock needles.

2. Then hook a circle around this 15 -pin lock needle.The total number of needles is 32 stitches.

3. Then hook a needle 15 short needles, 1 short needle and 15 short needles, and the total number of needles is 34 needles.

4. Then 34 short needles are hooked in each lap, and the size of the mobile phone is ended.

5. Then we hook four small flowers, rose to 5 needles, and stood up 3 braid needles in one pinhole. Two long needles were pulled in the next pinhole, and the cycle ended 5 times.

6. Make two pink balls around your fingers.

7. Next, stick the decoration with glue on the mobile phone.A beautiful mobile phone bag is ready.

2. How to carry the mobile phone package beautifully

1. In front of the waist, the back of the mobile phone bag in front of the waist is the most basic back method. This kind of back method should pay attention to the consistency of the color of the mobile phone bag and the color of the clothes, so that the Bags and clothes are more coordinated.

2. On the side of the waist, the back of the mobile phone is more comfortable and more casual. The mobile phone bag is not the focus within the range of sight, but it is more free and free, and more individual.

3. Cross the chest, cross the mobile phone to cross the chest, look younger, energetic, and full of youthful atmosphere, especially the novel mobile phone bag crossing on the chest, which sets off the handsome and fashionable people.

4. Cross -body behind, the mobile phone bag crossing behind the back, when you walk through from others, the small and beautiful back on the backcell phoneThe bag will add a glory to your back.

How about the camel's sunscreen jacket

Camel sunlight clothes are very lightweight and easy to carry.It uses polyester fabrics, which has a fast -drying and breathable effect of this material.The camel sun sunscreen is designed with a hooded storage, and the hat can be hidden in the collar, which forms two ways to wear.The most important thing to measure the quality of a sunscreen is to see its sunscreen function.Camel sunscreen UPF40 can effectively resist ultraviolet rays. Even in direct sunlight, it can play a good Sun protection effect.The design of camel sun sunscreen is divided into men's and women's models. The quality is very good and the price is not very high.

Is the camel sunscreen really sunscreen?

Although many sunscreens are under the banner of sunscreen, they do not have a real sunscreen effect, but the Sun protection effect of camel sunscreen clothes is obvious.Camel sun sunscreen has been treated with the sunscreen process, which can block more than 95%of UVA and UVB in ultraviolet rays, and protect the Skin from being black and sunburn from the source.Through testing, camel sun sunscreen can effectively block ultraviolet light and make it difficult for it to penetrate sunscreen and touch the Skin.Such sunscreen effects are already very good in sunscreen clothes. In the summer, we can avoid the Skin of the hot sun, and it can also be obviously dark.

Is the camel sunscreen clothes good?

Camel is a well -known brand in the United States, and its products have more products, such as the leather goods, shoes, clothing, etc. we are familiar with.If the grade is distinguished, camels should belong to the mid -range product. Although its brand influence is relatively large, the price of the product is not very high, and it has not reached the level of high -end goods.This can also show the cost -effectiveness of its products from another side.The history of the camel brand is relatively long, and the time to enter the Chinese market is relatively long. It is a brand familiar to Chinese consumers.In the Outdoor field, the influence of camels is constantly improving. In addition, its product quality is very good and the price is moderate. It has become a popular brand for consumers.

sunscreen jacket purchase skills

Many well -known outdoor sports brands have products for anti -ultraviolet clothing. The signs of these clothing clearly indicate related parameters such as clothing materials and UPF indexes.There are so -called sunscreen clothing in a small number of fashion brands, but most of them have not found related signs.In the past two years, some businesses have applied the concept of Sun protection to ordinary clothing. Since the public knows very little about sunscreen fabrics, there are some situations that are false by falseness.Therefore, people should not be blindly attracted by various fancy propaganda when buying sunscreen clothing.The clothing made of regular sunscreen fabrics will marked clear sunscreen parameters on their clothes signs. If not, it is recommended that you do not buy it.In addition, long -term washing or stretching may cause a reduction in the sunscreen performance of clothes. At this time, you need to replace or re -add the assistant to the clothing. The specific practice refers to the relevant instructions of the product.

Recommended & gt; & gt;

Introduction to military Telescope

The optical systems of military Telescope are different.Most of the military Telescope has a branch board, and its split boards used at night also have lighting.The pupil distance of the military Telescope is relatively large, so that the observer can wear anti -virus masks.In order to prevent hitting the head during the shooting, some aiming mirrors are as large as seven or eighty mm in pupils, and they must also have a moderate tolerant eye mask and lip.

In terms of optical performance and structural performance, military Telescope is more excellent and reliable, because its design is more prudent, with excellent materials and exquisite craftsmanship, such as good quality, less mixed gitons, magnifying multiplication and pupil size matching.Real the best resolution.

Due to the high quality requirements, military Telescope must be tested before the factory, which generally includes vibration tests, high temperature (1055 C) test, low temperature (one 45 C) test, rain or water -soaking test, and gas test.After these experiments, product performance can still be guaranteed to leave the factory within the specified range.Some products also have their own dryer in the mirror body. When the factory is removed from the factory, the air is poured into the dry air or nitrogen to effectively prevent the internal lens from growing mildew in the future.Ordinary civilian Telescope generally does not do environmental tests, or only part of the test.This is difficult to understand from the market, and it cannot be seen from the product appearance alone.

military Telescope main structure

The mirror body: The mirror body is the main body of the Telescope, divided into left and right mirrors, connecting it by connecting the axis. Its role is to support the upper and lower rectangular prisms, connecting object mirrors and eyepiece groups.

The material mirror group: the material mirror group consists of a lens, a lens lens, etc.The material mirror group and the mirror body are connected together with a thread, and the role is to receive the light imaging of the distant object (or target) on the coke.

Eye mirror group: The eyepiece group consists of a lens, a eyepiece frame, a visual handwheel, etc.The eyepiece set and the mirror body are connected with a threading ring. Its role is to amplify the image of the material mirror for people's eyes to observe and turn the vision of the handwheel can be adjusted.It requires that its range is 4 refractives.

Connection shaft: The connection axis is the connector of the left and right mirrors of the Telescope, and it is also the hub that realizes the adjustment of the meson within 58-74mm.

Cover and strap: The lens shelter and the glasses lid are designed to protect the material mirror and eyepiece.When the Telescope is not in use, the cover should be covered to protect the lens without damage.The strap is connected to the left and right mirror of the Telescope. When used, the strap can be hung on the user's neck to prevent the Telescope from being disappointed.

How far can military Telescope be seen

Under normal circumstances, about 3000 meters can be seen. In fact, such a long distance is not very clear. It is best to hold about 1000 meters, so many details can be seen barely.

military Telescope multiple

Without the principle of "standards", regular military Telescope multiple is generally 7 times 8 times and 10 times.

The multiples of military Telescopes should not be too high. The reconnaissance requires a large field of vision, and the high -power Telescope does not meet this requirement. The multiple is super high, the field of view is super small, and it is not easy to find and discover the goals.

military Telescope has almost no more than 10 times.Do not use multiple standards.

In fact, there are also many times. For example, the whistle mirror is ten times twice, but it will be on the shelves, otherwise it will not be guaranteed to be clearly viewed.

How to use military Telescope

Using a Telescope, you must first set your vision.Handheld Telescope to observe the far targets of thousands of meters away.Set the left and right eyes, and turn the eye mirror vision to the snail until it is clear. Remember the number of points of vision.Then set the distance.Both eyes are observed through the Telescope and pulled the Telescope lens barrier, so that the two fields of fields are merged into a circular shape. At this time, the number of sections of the meson is the observer's mesh distance.After using the Telescope for the first time, you should remember your vision and mesh, and then you can directly install it when you use it.When observing the Telescope, hold hands, and the elbow clips are close to the chest. This posture is relatively solid. If there is work or other support, the elbow should be supported as much as possible, especially using a large -rate Telescope.Use a Telescope in the weather or strong sunlight to wear a filter to make the observation clearer.

The dense position in the military Telescope can use the formula of "upper interval, down 1000, dense positions, distances on both sides. If you want to obtain that number, diagonal to remove the neighbor"Follow the target distance.This is specifically described in "military topography", which is a required course for each officer or scout.

1. Meter distance adjustment

First, adjust the positive refractive scale of the Telescope left and right eye mirror to 0 scale.Hold the left and right mirrors of the Telescope with both hands, search for the distant targets at the same time or press the left, right mirror body at the same time, so that the eyesight of the Telescope is the same as the pupil of the human eye (the full view of the human eye is round.), Stop adjusting.

2. Material image adjustment

First search the target. After locking the target, rotate the left -eyed mirror vision hand wheel, so that the target image of the Telescope left branch system is completely clear, and then turn the right mirror vision hand wheel to make the right branch system target completely clear.After completing the adjustment of the observed goals.Because the Telescope light road design has a dynamic automatic focusing function, when the definition of the Telescope is adjusted, you do not need to be re -adjusted when you observe the different goals.

3. Use at night

When the environmental light is dim or at night, it is recommended to use a Telescope with a pupil diameter of more than 7mm.Because human eyes are about 2-3mm in the daytime, the pupil diameter is about 6-7mm in the dark, so the Telescope can collect more light than the naked eye.

The difference between civilian and military Telescope

First of all, their optical systems are different.Most of the military Telescope has a branch board, and its split boards used at night also have lighting.The pupil distance of the military Telescope is relatively large, so that the observer can wear anti -virus masks.In order to prevent hitting the head during the shooting, some aiming mirrors are as large as seven or eighty mm in pupils, and they must also have a moderate tolerant eye mask and lip.

In terms of optical performance and structural performance, military Telescope is more excellent and reliable, because its design is more prudent, with excellent materials and exquisite craftsmanship, such as good quality, less mixed gitons, magnifying multiplication and pupil size matching.Real the best resolution.The shell of the military Telescope use metal instead of plastic to ensure that it does not crack or deform after long -term use.In contrast, ordinary civilian Telescopes are worse in sealing and materials. Some are not only plastic shells, but even internal lenses are made of plastic.

Due to the high quality requirements, military Telescope must be tested before the factory, which generally includes vibration tests, high temperature (1055 C) test, low temperature (one 45 C) test, rain or water -soaking test, and gas test.After these experiments, product performance can still be guaranteed to leave the factory within the specified range.Some products also have their own dryer in the mirror body. When the factory is removed from the factory, the air is poured into the dry air or nitrogen to effectively prevent the internal lens from growing mildew in the future.Ordinary civilian Telescope generally does not do environmental tests, or only part of the test.This is difficult to understand from the market, and it cannot be seen from the product appearance alone.

Telescope maintenance

1. Ensure that the Telescope is placed in a ventilated, dry, and clean place to prevent mildew. If possible, put the desiccant around the Telescope and often replace it.

2. The dirt or stains left on the lens should be gently wiped with a professional cloth to avoid scraping the mirror surface. If you need to clean the mirror surface, you should take a little alcohol with dehydrated cotton.Wipe the edge of the edge, and keep changing the dehydrated cotton ball until the rubbing test is clean.

3. The Telescope is a precision instrument. Do not fall, pressure or do other violent movements on the Telescope.

4. Non -professional personnel should not try to disassemble the Telescope and clean the interior of the Telescope.

[fruit seed homemade potted plants] fruit seeds potted full works of vegetables and fruits homemade potted plants

fruit seed Pot Potting Collectionfruit seed homemade potted plants

1. [Pineapple potted]

Buy pineapple and cut off the top flowers.

Do it slightly.

Put a toothpick, immerse the bottom in water, and change the water every day!

Wait to the end of the minister's root beard.

Transplanted into the Flower pot and keep enough light.

You just wait for the big pineapple.

2. [Radish potted plants]

When cutting the vegetables, put a large -looking and fat carrot head and bear a large piece of heart, throw it in the water heater, and grow up crazy.

Try to grow in a slender water heater as much as possible. The leaves will rush up straight up. Remember to change the water often.After the long leaves, take it out and place it in a suitable container, so that the shape will be very straightforward and energetic.

3. [taro potted plants]

taro is one of the earliest vegetables planted on the balcony, because taro can be planted as vegetables or planting plants. Its shape is similar to the sea and dripping Guanyin, and it is a beautiful landscape in the home.

The management of taro is relatively extensive, and the requirements for soil, water and Fertilizer and light are not strict. There are almost no pests and insect pests. It takes a long time to watch. The edible parts and time are also very long. It is very suitable for friends who want to grow vegetables on the balcony.

Plant taro is a consumption taro purchased in the supermarket. It uses self -equipped potted soil. After planting, it is not fertilized. It only receives one to two hours a day of scattered light, and sometimes it is placed in the living room for a few days to get out of the sun.However, water cannot be lacked. Pour water once or twice a day, and spray water from the leaves and surroundings from time to time.

4. [Tudou potted]

When buying potatoes, buy more eye -catching. Such potatoes have a high germination rate.Put it in a plastic bag and let it germinate under natural conditions.There are several small buds sprouting on each potato, and some have grown some small roots of Bai Shengsheng with dancing claws. Ah, you can plant itWell, wise

1. Cut a potato into two to four pieces. Each piece must have buds, and try to distribute the bud eye on each potato as much as possible.

2. Dig a small pit in a pot full of soil and bury potatoes.

3. After planting, cover the soil, and water it if it is too dry.

After eating the fruit, do you throw away the remaining fruit cores?In fact, many fruits can become interesting potted plants. A few steps can make fruit seeds transform into the forest in a cup!Come and try it!

5. [Longan Forest]

Longan is actually easy to plant. When eating longan, you might as well leave the nucleus to try it.Before the longan bubbles, you need to remove the top flesh and white soft tissue at the top, otherwise it will be easy to recruit bugs in the future.

1. Longan for two days of water, the shell has gradually cracked, and you need to change the water every day.

2. Soak the water for about a week, the buds are facing up, and the planting in the basin is arranged from the outside to the inside.

3. Spray water twice a day, and start germination after a week.

4. After more than ten days, the small bud began to "compare".

5. In about a month, the small forest grows up.Can you connect it with the longan you eat?

6. The biggest viewing point of longan potted plants is the variable -colored leaves. The new leaves are red, and then it becomes yellow and then turns green.

6. [Lemon Forest]

1. Soak the leftover lemon seeds.

2. Use the mule to remove the shell on the surface.

3. Then find a wet soil you like or cup you like, put all the seeds, and look up.

4. Then cover it with coarse sand or small stone.You can also cover the plastic wrap, spray some water for 2 to 3 days, and germinate about a week.

5. After germination, spray water for 2 to 3 days to keep moist to help grow.

6. This is the finished product. It is very beautiful. Add a touch of green to your desk and desk.If it grows so high, if he is too dense, he can also divide him into several places to cultivate.

7. [fire Dragon Forest Forest]

1. Cut the Dragon Fruit in half, and gently scrape the flesh into the container with a stainless steel spoon.

2. Gently rub the flesh with water and gently rub it with your fingers, try to separate the flesh from the seeds.

3. Pour the rotten flesh into short stockings, continue to rub a few times, and then soak water for 1 day. Do not soak water for more than two days, otherwise you will germinate and continue to rub the next day.There are only black seeds left, which looks a bit like black sesame seeds.

4. Raise the stockings and filter dry water. Use toilet paper to absorb the water on the seeds. Take out the seeds and lay them on the plate. Use the electric fan gently to make the seeds completely dry and separate the grains to start planting.

5-9. Choose the right holeless potifier, or fill the hole with a hole in the hole, put it in the sterile culture soil, full nine minutes, and spray some water to make the surface soil very humid.Then spread the seeds evenly on the cultivation soil.

10. After spraying water several times on the seeds, wrap it with plastic wrap to keep the surface wet, and then open it to spray water once a day until the new bud is completely opened.

11. After a week, the entire pot can be covered, about 1 cm high. The shell of the seeds will fall one after another. The whole pot feels green and grassy.

8. Grapefruit Potting

1. The remaining seeds of grapefruit are the seeds of grapefruit ~

2. Use the mule to remove the shell on the surface.

3. Use water for 5 to 7 days, and change the water every day, so that the water will not smell bad, and the seeds will not be broken.

4. Find a wet soil you like or cup you like, put the soaked grapefruit seeds in the utensils, and your head facing up.

5. Cover with coarse sand or small stones on it.

6. You can also cover the plastic wrap above, spray some water for 2 to 3 days, and germinate in about a week.

7. Spray the buds for 2 to 3 days to keep water moist, which helps grow.

9. [Onion]

When burning vegetables in daily, you can leave the green onion with a long left and right, attached to the roots, as long as you place it in a glass with a little water and put it in a room with sufficient light to raise it!

10. [garlic.

The garlic you bought is germinated, you can put it directly in the glass and plant it with a little water.The taste of garlic sprouts itself is greater, and the garlic seedlings are lighter, and it will have a good effect to add to the salad and Italian noodles.

11. [Chinese cabbage.

Cabbage can also use a small amount of water and sufficient sunlight to grow again.AboutWithin 1 to 2 weeks, you can transplant it into the cultivation soil, and it will slowly re -turn into a complete cabbage.

12. [carrot.

Put the top of the carrot with a small amount of water and put it in a room or balcony with sufficient light.In this way, you can grow non -toxic and pesticide carrots!It is very suitable to add to the salad.

13. [[[[[Laler (Nine -story Tower).

cut outThe 3 to 4 -inch stems are placed in the water cup, and the sun is shining directly, allowing it to grow up and grow slowly.When the root minister reaches 2 inches, it can be transplanted into the Flower pot and planting.

14. [[[[Celery (celery).

Leave the bottom of the celery and place it in a small amount of water with a small amount of water or a shallow dish to provide enough sunlight.When the leaf in the middle starts to grow, it can be transplanted into the soil.

15. [lettuce.

Immerse the lettuce head inIn the 1/2 inches of water, water the water daily and keep the water level at the same height.A few days later, the roots and the new leaves grew out to be transplanted into the soil.

16. [[[[[(coriander).

Putting the stems in the water will grow.When the roots are long enough, they can be planted into the Flower pot.Remember to keep sufficient light, you can grow a complete cricket after about a month.