1. What is the reason for fishing and drifting

When fishing, many fishermen have encountered the situation where the fish drifted into the water and did not stand upright. The tilting was crooked to the side. The floating tilt has a great impact on fishing. So what caused this?

1. Space Beans are pulled too tightly

The float is connected to the line group by the drifting seat. Most of the drifting seats are made of rubber materials, which will have a certain hardness and telescopic.The position of the drifting seat is fixed by the space Beans on both sides. If the space Beans on both sides are tightly locked the floating drifting seat, it will form a squeeze.In other words, there is no room for activity, and it cannot be rotated on the line group freely. After entering the water, the drifting line group is too tight and tilted.Space Beans should leave a little gap to allow the floating seat to have a free rotation space.

2. The thick line with a small float

The matching of fishing accessories should be matched. The small hooks are small drifting, and the large hook thick lines are used in large drifts. If the supporting facilities are unreasonable, there will be many problems.The fish wire used is too thick, and the line will be very hard. If you want to pull straight in the water, you must use a large float.If you choose a small float to match the thick thread, you can't pull the straight line at all in the water in the water.

3. Find the bottom when it is tuned

The floating tilt is also related to the drift. The common thing is that the floating drift has found the bottom.Some fishermen may not understand what is the bottom of the drift, here is an explanation.The floating bottom refers to the leading pendant to lie down, which means that the float's buoyancy has not played a role, and the meaning of existence is only to let us see it.For example, the eye -catching eye is too much to be a typical bottom, or if the water depth is not enough to the end, it will cause the float to lie on the water.

4. The quality of float

The quality of the float is good and bad, and the material is not the same. The good floats rarely occur during use, such as the drifting body is not straight, the paint water is not uniform, and the explosion is cracking.Once the float has problems such as explosive tops, it will cause the entire float to be imbalanced in use, and then the water tilt.

5. Tilt after stamping water

This reason mainly occurs in wild fishing. Wild fishing cannot be avoided in wild fishing. It is easy for us to see the flow of water, but it is not easy to be discovered at the undercurrent of the water.Many friends say, how can there be no movement, but after floating and falling into the water, turn around or tilt back and forth?In fact, this is caused by dark current underwater. The fish line has a certain resistance to the flowing water, which will drive floats and cause tilt. When the water flows are large, they will drift.

6. The rod is wrong

Most of this problem will only appear in some fishing novices, and veterans rarely make such mistakes.The most taboo point of fishing is to throw a strong pole, not to say that you can't throw it, but you must know the operation in the later period. After you throw it, you must know that you can pull the fishing rod later to keep the water float into the leading state.Otherwise, the lead is formed in front of the float, and a slanting angle has formed, and it will naturally tilt after the floating water.

2. What should I do if the fishing floating cannot stand up?

During fishing, it will cause us to be unable to perceive the bite of the fish and reduce the success rate of fishing. In this case, we need to solve it in time. Generally, we can deal with the following steps.

1. Check whether the Fish drift is appropriate

First of all, the reason for the fish that is not erected is that the weight of the Fish drifting is not suitable.When fishing, you need to choose suitable Fish drift based on the size of the fish hook used and the type of bait used.If the fish is too light or too heavy, it may cause the fish to be ravaged and adjust according to the actual situation.

2. Check whether the fishing group is correct

If it is not the problem of not Fish drift, you need to check whether the fishing group is correct. First, see if the tension of the fish hook is moderate, and then check whether the fishing group is wrapped or curled. If the fishing group is incorrect, it needs to be adjusted until the Fish drift stable.

3. Adjust the Fish drift position

If there is no problem above, it may be caused by the incorrect Fish drifting position. At this time, it needs to gradually improve or reduce the location of the Fish drifting until it can erected stably.If the location of the fish is too high, you need to gradually reduce the location of the Fish drifting; if the Fish drifting position is too low, the Fish drift position needs to be gradually increased.

4. Adjust the angle of the fishing rod and the location of the fishing point

If the floats have not been erected, you can try to adjust the angle of the fishing rod to a vertical or near vertical position from the water surface, or adjust the location of the fishing point to find a place where the water flow is slow or the water depth is shallow.

5. Change Fish drift

If the above methods have been tried, the Fish drift still cannot be erected, then it may indicate that the Fish drift is damaged or there is a quality problem, and only a new fishing float can be replaced.

1. What does fishing rod H mean?

The H of the fishing rod represents the hardness of the hardness, the abbreviation of the English word Hardness. From 2H to 8H, the larger the number, the higher the hardness.Hardness is one of the main parameters of the fishing rod, which represents the overall soft and hard level when the fishing rod is subject to external force. The tone of the fishing rod is two different concepts. Among them, the tone is mainly determined by the fishing rod design planThe hardness is mainly determined by materials and craftsmanship. The hardness of the tune of 19 tunes can be 4h, 6h, or 10h.

The larger the number in front of H indicates that the hardness of the fishing rod is relatively higher, but the hardness of the fishing rod does not have a uniform standard. The hardness of the same H value Fish rod produced by different brands may be different.The hardness is not as good as the 4h fishing rod of the B brand.

2. What are the hardness of the fishing rod?

The hardness of the fishing rod is an important parameter, which determines the performance and applicable occasions of the fishing rod.The hardness of the fishing rod is usually divided into the following Levels. Each level has its specific advantages and uses:

1. Ultra-Light

The ultra -light fishing rod is one of the lightest and softest Fishing rods.They are usually used for fish with smaller fishing types, such as sea bass, carp and catfish.These Fishing rods are very sensitive and are suitable for the situation of smaller bait and lightweight lines.Ultra -light Fishing rods are suitable for long -term fishing because they reduce fatigue.

2. Light (light)

Light Fishing rods are slightly harder than ultra -light, but they are still relatively soft.They are suitable for medium -sized fish, such as sea bass, carp, catfish and small salmon.Light Fishing rods have good sensitivity and ability to throw, suitable for various fishing occasions.

3. Medium (Medium)

Middle Fishing rods are a general -purpose fishing rod that are suitable for various fishing conditions.They are stronger in hardness than light Fishing rods, suitable for fishing medium -sized fish species, such as black bream, wolf fish, miscellaneous fish and part of freshwater fish.Middle Fishing rods have certain elasticity and can help reduce the impact of fish.

4. Medium-Heavy

The medium -heavy fishing rod is stronger and harder, suitable for fishing large fish, such as big horsesy fish, large fishes, large freshwater fish and seawater game fish.These Fishing rods have sufficient strength to cope with the resistance and tensile resistance of large fish, which are usually used to need a larger fishing line group and heavy bait.

5. Heavy

Heavy Fishing rods are the most strong and hardest fishing rod types.They are usually used for large -scale fish fishing, such as large deep -sea fish, great white sharks and huge freshwater fish.Heavy Fishing rods can withstand huge tension and pressure, suitable for extreme fishing.

6. Ultra-heavy

Special Fishing rods are one of the strongest Fishing rods. They are mainly used for fishing super giant fish, such as giant sharks, large deep -sea fish and other large predatory fish.The hardness of these Fishing rods is very high and can deal with great tension and impact.

The rattan furniture, as the name implies, uses some vine family plants through manual or mechanical processing to become a furniture type that people can use, seats, tables, and rocking chairs.Coffee tables, etc., can be divided into two types according to the division of different rattan: one is the inherent natural material, and the other is some of the fake rattan materials.

Pure natural vine is a rattan plant that grows in other tropical countries and regions.The other is the artificial imitation rattan furniture. Because it does not use natural rattan materials, the number of imitation rattan furniture is also very large. In terms of price, there are often a lot of pure natural rattan furniture.

rattan furnitureWhat are the types of?

Rattan5000Multiple color varieties, mainly rattan, rattan mats, rattan weaving, rattan furniture, etc.4Class, which has the characteristics of lightweight, coolness, durability.

rattan ,It is a woven -like semi -finished product that woven rattan leather.Specifications37~89cmLong, the patterns are different, you can cut it at will.Mostly used for interior decoration.

rattan mat,There are two types of primary colors and inter -colors, including bed seats, squares, pillows, large seats, sofa seat sleeves, hand baskets, etc.

vine furniture,There are tables, chairs, sofas, stools, beds, cabinets, coffee tables, boxes, screens, etc. Among them, vine chairs have the largest output.There are dragon and phoenix chairs, peacock chairs, plum chairs, orchid chairs, dining chairs, etc.20century80Since the beginning of the age, it has been directly woven into large rattan furniture with rough rattan, such as dining chairs, tables, screens, cabinets, etc. The style is simple and rough, full of natural interests and the atmosphere of the times, and is very popular in the international market.

vine weaving,Including daily utensils, toys, decorations, etc., such as hand -raising, cans, boxes, boxes, lamps, mirror frames, bookshelves, tea cups, Flower pots, frogs, pandas, elephants and other toys.

What are the advantages of rattan?

Since rattan furniture is popular with so many people, rattan furniture must have its unique advantages. Xiaobian summarizes the advantages of rattan furniture, as long as the following analysis is analyzed:

Breathable:Because rattan furniture is mainly used to make furniture types such as seats and rocking chairs such as seats, rocking chairs, the permeability of rattan furniture is much better than that of some materials made of furniture, especially for the picky season. I believe it is believed thatEveryone feels like this. In the summer, sitting on a wooden chair feels uncomfortable, not only is it uncomfortable, but also feels more impermeable, and the advantage of rattan furniture has not been highlighted.winter warm and cool in summer is nothing more than the best expression of the use of rattan furniture.

Strong and tough:When we choose furniture, our people are the main selection criteria. This is also a condition that meets the popularization. Ratty furniture is strong and durable. It is in line with peoples first considerations.When moving furniture, it is inevitable that it will encounter. This is a problem that many people are very worried. The rattan furniture itself has a soft power similar to women. In some aspects, you can easily avoid collision and maintain your integrity.

Will not put pressure on the environment:We measure a piece of furniture and have an important reference point, that is, this furniture is green and not green. A furniture that is easily degraded is very beneficial for green environmental protection. If some waste furniture in our family does not want,If you discard it at will, it is likely to be burned or directly discarded, but because the rattan furniture is pure plant material, it can be quickly integrated into the ground.

Unlimited supply:There is a very powerful place for vine plants. I believe you may not know that you can complete the new part in a short period of time. You dont have to worry about it.Provide high -quality rattan.For many aspects, to process a variety of beautiful furniture products.

one,MountainerWhat is the difference from Hiking sticks

The Mountaineering stick and Hiking sticks are two kinds of canes often used in life. There are many similarities between the two, but there are some differences between the two kinds of canes in use. So what are the differences between mountaineering sticks and Hiking sticks?The role of mountaineering sticks is mainly to support and safety. The role of Hiking sticks is mainly to take care of fitness and safety; mountain climbing sticks are more professional, and Hiking sticks are more casual.What are the differences between the Climbing stick and walking stick as the following three points:

1. Functional differences

The Climbing stick is also known as the snow mountain stick, which is basically designed to climb the high mountains above 3,500 meters, and it is more protected.In high altitude hypoxia, low temperature ice and snow, various hard rocks and gravel mountains challenge the limit of life, there must be no Mountaineering stick.

Cross -country walking cane is mainly designed for fitness and has the functions of fitness and protection.The difference from the Climbing stick is that two canes must be used at the same time.It is mainly applicable to those who are below 3500 meters above sea level, and you can walk fast on the Hiking activities that day.The special features of off -road walking make it the best aerobic exercise and attract the attention of fitness and medical experts.The State General Administration of sports has been promoted nationwide as an excellent fitness project.

2. Material difference

The Climbing stick is supported by support, so most of the metal alloy is used as a pole body.The purpose is to strengthen support.The "handle" design is mainly grasping the palm of the hand, and the wristband is a simple ring -shaped strap.The shock absorption uses a shock absorption spring in the pole body. The bottom of the pole is only the metal tip of the metal.

Cross -country walking cane has a variety of functions. To this end, carbon fiber synthesis is used as a pole body. The wristband is specially designed. It is similar to simple gloves. The bottom is equipped with a small boot -like shock -reducing head in addition to the metal pointed head.Its rod body is very light (three or two). In addition to sufficient support, there is also good elasticity, which can bend and straight reaction force to rely on the user.In addition to the special design of the wristband, in addition to facilitating the handle, it can change the direction of the hand.In addition, it is not a grip handle, but to bring support and pushing a cane with wrists, but also a unique design to reduce hand vibration.The metal pointed at the bottom can easily walk on the ground such as ice and snow, and small boots can ensure that walking on a Smooth ground such as slate and cement can not slip.

3. Different from the method of use

The use of mountaineering rods is mainly to grab the handle. In addition to the upper mountain, the upper arm is basically tightly attached to the upper body, and the shoulder joints are basically not moved. The elbow elbow joint is the axis, and the body balance is maintained by changing the support point of the cane.The Mountaineering stick does not have the function of walking flat roads, and it is impossible to use two.

The use of off -road walking cane requires the shoulder joints to swing back and forth to increase the amplitude of the swing arm to enhance the fitness effect and protective effect.Walking flat roads, on the basis of normal walking, the hind legs are straight, the front legs follow the ground, the arms are opened, and the support point of the cane is slightly backward on both sides of the body.OK.When climbing, give full play to the role of wristbands.When you go up the mountain, put the cane first, use his wristband to pull your body up, and turn your arms to bend, and use the wristband to push the cane behind you to continue your body.When going down the mountain, the cane is supported in front, and the arm should be a straight line with the cane, which plays a role in extending the length of the cane.

2. Is the Climbing stick folded or a telescopic type?

1. Two sections of telescopic mountaineering sticks

Two section of telescopic mountaineering sticks are the hardest and most stressful designs, so they are more suitable for snow sports, or those who pursue the power of mountaineering sticks.However, dual -port portability is the worst, even if it is minimized, it cannot be placed on the bag well.Due to the two -stage design, in order to obtain higher intensity, there will be a lot of overlapping between the poles, making them stronger.Therefore, although they have only two parts, most of them are not so light and usually heavier than other mountaineering sticks.In the past few years, due to the influence of lightweight waves, the two telescopic climbing sticks are rare.

2. Three sections of telescopic Mountaineering stick

Three sections of telescopic are the most common design in the market, and they are more compact than two sections.Almost all three sections can be tied to the Backpack, or in the average size box.The three -section is usually lighter than the two -section Mountaineering stick, but the intensity is reduced.Nevertheless, they are still difficult enough, and they will emphasize in most cases to avoid extreme pressure.Most people choose three telescopic climbing sticks for Hiking, Hiking, climbing and climbing.

3. folding type Mountaineering stick

The folding Climbing stick has only started in recent years.These folding mountaineering sticks are currently the lightest and most portable sticks.Although they are much lower than the durability and intensity of two to three sections, they are more durable enough to allow most ordinary climbers and Hiking travelers to adapt to low -to -middle intensity Hiking and mountaineering.They are particularly suitable for climbers and off -road runners, because they are small, lightweight, and easy to carry.You can put them outside or inside, so that you can use them to climb rock.Behind the road.Generally speaking, most folding climbing sticks are 18-23 cm shorter than most telescopic climbing rods. Depending on the weight, their weight can reach 280-400 grams.There are several folding mountaineering sticks without removable wands, and most of them cannot adjust the height.These are disadvantages and advantages, and they have become lighter.

Suggestion choiceTelescopicThe Climbing stick will be relatively safe.folding -type mountaineering sticks are more suitable for outdoor activities of tourism.

1. How to match the rattan table and vine chair is more fashionable

The function of the rattan chair:

In addition to the main skeleton part of the vine furniture, most of the vine noodles are prepared by fine vines, so that the furniture has gaps, good breathability, and increases the comfort of contact.Because of the soft texture and high ductility, Tengcai can shape more changing shapes or lines, and therefore is often used to make casual chairs that focus on soft touch.

In order for young people to accept, vine furniture will do special dyeing treatment to meet the needs of more age -layer consumers.In addition, rattan furniture also changes more in shape.Combined with composite materials, it is made of bronze metal or soldering iron strips as handle or tables and chairs.Or with a cute cloth pad can make the vine chair look more modern.

The furniture made of vines mainly includes bed tables, seats, sofas, coffee tables, coffee tables, leisure chairs and cabinets.Because the rattan noodles are soft, it will not be used as load -bearing furniture, and the rattan home accessories are mainly containers such as puts, vases and other containers.At present, the materials, handicrafts and technical sources weaving of Fujima are dominated by the traditional craftsmanship in Southeast Asia. It is full of ancient Nanyang style and is loved by middle -aged groups.

The color matching of the rattan chair:

The vine materials rich in natural charm can make full use of natural materials to create excellent effects, such as placing fruits or dried flowers and dried fruits in vine baskets or vine vases.The main matching method of rattan furniture or rattan jewelry is in addition to mastering the principles of nature, elegance, and leisure, followed by color.When the main color of the space is dark, the purchased vine products can tend to brown or dark brown.Light -colored home space, you can choose a rattan or other rattan vine, with a fancy and bright cushion or cloth accessories.

2. How to buy good quality rattan tables and chairs

First, sit up and try it in person to see if there is a crunch when shaking or being too heavy.

Second, see if the welding point at the welding is firm, and the surface of the rattan system should not have a lot of exposed connection ports.Be sure to touch it with your hands, Smooth and flexible.

Third, it depends on the workmanship. See if the rattan is evenly compiled.Select products with uniform thickness and consistent color, seeWhether the fabric is sewn is delicate and whether the hardware is high -end.

Fourth, the rattan chair is both breathable and elastic. It is best to choose a back chair with a back, and put a stool on the foot to make your legs flat and prevent the lower limbs from ischemia.

Fifth, some rattan furniture is actually imitated with plastic and other materials. Observing the fractures of the vines on the furniture. If it is plastic and other products, it will be particularly neat, and the rattan fracture will be frizzy.

Sixth, the toughness of the rattan is the most important. It is recommended to find out those small parts on the back of the furniture. Twist it with your hands. The inferior vine will easily break the residue. Good vines generally will not break.

top ten brands of vine furniture & gt; & gt;