1. How to charge charging Camping lights

The use of charging Camping lights is very convenient, and the battery life is relatively long. It is a type of Camping light that is used more now. So how does the charging Camping light charge?

There will be a USB port on the Camping light of the general charging model. The Camping light can be charged with the power supply through a special charging cable. Generally, the computer, charging treasure, and home power supply can be charged to the Camping light.

2. How long does it take to charge the Camping light to charge

The charging model needs to be sufficient before the Camping to avoid being used in half when the Camping is used to find out that it is out of power. So how long does the Camping light be fully charged?

There are many types of Camping lights on the market, and the battery capacity of different Camping lights is different. The time required for charging will be different. Most of the Camping lights are prompt.If you use photoelectric, it is almost 5-6 hours.

3. How to charge Camping lights in Camping

Camping lights are generally charged at home and then brought to the Camping site, because the Camping site does not necessarily have a power supply to charge Camping lights. What should I do if the Camping Camping light is out of power?

1. If it is a Solar Camping light, it can be charged using solar energy during the day. This is more convenient.

2. If the ordinary Camping light is out of power, you can charge the Camping light through the mobile power or large Outdoor power supply.

3. If you are driving and Camping, you can also use car charging to charging Camping lights.

1. How to tie the fish line on the fishing rod

It is very important to tie the fish wire and fishing rod correctly in the fishing activity.If the binding method is incorrect, it may cause the fish wire to be broken in the fishing process.

1. Prepare the fish line

Choose the right fish wire, then gently wipe the fish line with a clean wet cloth to remove the dust and dirt on the surface, and apply an appropriate amount of lubricant on the fish line to reduce friction and improve fishing efficiency.The end of the fish wire is trimmed neatly, avoiding the frizzy line heads affecting the effect of the line.

2. Check out

Check whether the surface of the fishing rod is damaged, cracks or deformation, etc.; check whether the fishing rod interface is firm to avoid falling off or broken during the fishing process; check whether the weight and length of the fishing rod meet the requirements to ensure that it can meet during the use process to meet the use of the process.The best effect.

3. The steps of tie the fishing line and fishing rod

(1) Preparation tools: need to prepare scissors, cutting knives, tiered boards and other tools.

(2) Fixed fish wire: Fix the organized fish wire on the tie line, and then place the tie line on the flat countertop.

(3) Winding: Use your right thumb and index finger to pinch the head on the tie on the line, and go around inward to ensure that the coils that are around are flat and close.

(4) Adjust the length of the ring: Gently pull the center of the coil with the right thumb and index to the center of the coil to gradually reduce the coil and adjust the length of the ring to achieve the appropriate length.Generally speaking, the length of the circle should be slightly shorter from the pole handle.

(5) Fixed coil: Place the center position of the coil on the pole handle, use the right thumb and index finger to pinch the coil and the pole handle, and gently pull the wire head at both ends, tighten the coil and fix it on the pole handle.EssenceMake sure the coil is fixed and stable to avoid loosening or falling off during use.

(6) Adjust the density of the coil: Use the right thumb and the index to light the center position of the inside to make the part of the coil and the pole handle contact more dense.This can make the entire coil fixed on the pole handle more firmly.

(7) Fixed line on the line: Fix the upper end on the fishing hook to ensure that it is fixed and stable, so that it will not fall off or slide during the fishing process.

(8) Complete the tie line: Check whether the tied fish wire is firm, neat, and noble.If you are satisfied, trim the extra line head to complete the line tie process.

(9) Check the fishing status: After completing the line tie, hang the fishing hook in the water for testing.Check whether the fishing status is normal to ensure that there is no looseness at the connection between the fish line and the fishing rod.If everything is normal, you can carry out fishing activities with peace of mind.

Second, what are the tied methods of the fish line connection

The fishing line is the fishing line. For a newbie of fishing, it is important to learn to tie line. When we buy a pole, what we need to do is to connect the pole and the line. However, it is not a simple matter.Many novice friends are easy to tie or break the lines, affecting fishing.The tie method of the fishing line is divided into two types of Fishing rods and Fish hooks:

(1) How to tie fish rods in fish lines

1. The valve core connection method

(1) Put a soft head on the tip of the pole and fold it into a semi -round curved.

(2) Take a section of valve core and hold the soft band.

(3) Put in the fish line from the soft Belt ring, and then hit a knot.

When taking the wire, the valve core retreats from the soft Belt, and the knot is successful.

2. Live -set ring connection method

(1) Put a pimple at the top of the soft Belt.

(2) Put the fish line on the top of the ring.

(3) Fold the ring into a double ring.

(4) overlap the double ring together.

(5) Pass the soft band from the ring.

(6) Tighten the line to make the ring tightly hold the soft band.

Just loosen the ring when taking the wire and exit the soft band from the ring.

3. Space bean connection method

(1) Fold the top of the fish line into a semicircular ring.

(2) Pass space Beans from the semi -ring.

(3) Put a soft band on the tip of the pole.

(4) Put the semi -circular coil and hold the soft band.

(5) Tighten the fish line, narrow the coil, and tighten the soft band.

Expand the coils when taking the wire and draw a soft band.

4. Connection ring connection method

(1) First bend the soft band above the tip of the pole into a ring, and tighten the interface with a thread.

(2) Then connect the ring with the ring on the soft band together.

When taking the wire, just take off the connection ring, you can remove the fishing line from the fishing rod.

(2) What are the ways to tie Fish hooks in the fish wire

The fishing line tie fish hook should also be the fishermen. At the same time, it can be tied and tied to the fishing cost. After all, the Fishing gear shop does business, the hook line consumes time, and it is impossible for others to serve us in vain.There are many ways to tie the fish hook, mainly:

1. Wrap the fish wire to about two laps on the hook handle, and then tighten it.

2. First wrap the fish wire around the hook four or five laps, and then tighten the previously reserved fish line through the coil.

3. Wrap the fish wire from the middle position of the fish hook to the handle, then tighten and reserve a coil. Finally, pull one end of the fish line to pull tightly.

4. Start the fish wire from the bottom of the hook handle, and then wrap it to a certain number of laps and leave a part of the thread head.The opposite direction of the hook tip is easier to get fish, so try to keep the tip outward as much as possible after the hook is tied.

5. Wrap the fish line on the handle, then leave a part of the coil and tighten it.

6. First take a fish hook with a suitable fishing line first, wrap it around the handle for five or six laps. When the fish line is slipped outward, it is blocked with your fingers, and then slowly pulls the head when tightening.The other fish hook also uses the same binding method. After the hook distance is fixed, the double hook is removed and the double -share line is knotted. Finally, the small circle is tightened.

Kind tips:If you first learn fishing, it does nt matter if you do nt bind the hooks. You can also buy the finished sub -line to use it. After learning to tie the hooks, you can buy the fish line and the hook for the hook.

1. How to inflatable laziness Inflatable sofa

In recent years, lazy inflatable sofas have become popular, and a lazy sofa is placed in the living room to create a casual comfort.However, there are still many people who have not used lazy sofas and do not know how lazy inflatable sofas should be inflated. Next, I will briefly introduce the inflatable method of lazy inflatable sofas.

The inflatable method of lazy Inflatable sofa is very simple. Generally, the method of electric inflation is used. Most lazy people inflatable sofas are equipped with a dedicated inflatable pump to connect the inflatable pump to the sofa.Then, usually, you need to insert the nozzle of the inflatable pump to the inflatable mouth, and then open the switch of the inflatable pump until the sofa reaches the right degree of inflation.

There are also some lazy inflatable sofas that need to be manually inflated. They also find the inflatable mouth first, and then use the air jap or a fan to inflatable through the inflatable port. Generally, the manual inflatable Inflatable sofa is convenient for electric.

Second, how much gas is it suitable for inflatable sofas

When inflating the Inflatable sofa, pay attention to the moderate inflatable. Too full inflatable and too little are not conducive to the maintenance and use of inflatable sofas. Generally, it is almost 90 % full.The appropriate degree of Inflatable sofa can rely on the feel: when you are inflating for the first time (or when you are inflated in the hot summer), you only need to wait for the sofa surface line to basically disappear, and it feels a bit soft to touch it with your hands.It's almost the same,If you don't feel enough, you can make up a little bit.

In addition, it should be noted that lazy inflatable sofas will "leak" as natural as the tires when they are used normally. They need to make a little bit of air regularly, usually about every 10 days to replenish qi.

three,How to use lazy inflatable sofas

You can start using the lazy sofa, so do you know how to use lazy inflatable sofas?

1. Sitting method in horizontal

The sitting method of lazy sofa is supported by the human body from head and neck to the entire waist and back. It is easy to read, watch TV, and any posture.

2. Sitting method

The lazy sofa can lie directly on it. When it is tired, lying directly on it, the lazy sofa will be spherical and fit the body.

Which Jordan basketball shoes and Anta basketball shoes are better

Jordan is a sports product brand under Jordan sports Co., Ltd.Jordan sports Co., Ltd. is China's leading sporting goods brand enterprise, and the top 100 enterprises in Fujian Province and the top 30 companies in Fujian Province.In order to meet the needs of professional athletes and sports enthusiasts, Jordan basketball shoes designed and produced competition shoes with shoe design with shock absorption and bullet -aid dual functions and protecting the ankle.

Anta is China's leading sporting goods company. Anta is a professional sporting goods brand that is positioned in Volkswagen. He focuses on providing the highest cost -effective professional sports products for the most vast common consumers.The role of Anta basketball shoes is to maximize help you, improve you to complete a game or training, and protect you from harm.

In addition to the characteristics of basic basketball shoes, Anta basketball shoes are rough and thicker.It's quite abrasion -resistant and non -slip, which is very suitable for playing outside.For example, Anta's "3VS3" series and "Streetball" series. These two series of shoes are designed for the outer field. The soles are very resistant; Anta's cement killer and the domineering series of basketball shoes are all outside weapons.

The editor thinks that Anta will be better than Jordan. Chinese Jordan is easy to misunderstand Jordan from the name, so it is suspected of mixed people.Anta signed a contract with the NBA's Francis, Scolar and other stars, and Jordan would only find some black people to advertise.Statistics from the China Commercial Federation and the National Commercial Information Center of China show that Anta sports shoes are ranked first among similar products among similar products in the country from 2001 to 2004.Anta is now a well -known domestic brand that collects honors such as "China Famous Trademark", "China Famous brand Products" and "China Exempted Products".A expander based on domestic and international strategic development.

How to choose basketball shoes

1. Physical conditions and position on the field

Power -type players need to have the maximum buffer and stability sneakers.Such shoes may be serious.The characteristics of strong offensive striker center are characterized by people with many people's contacts, many reversal, and basketball shoes needed for weight. We must pay attention to the strong upper, the middle bottom twist, and the ankle care.

2. What kind of player

A full -scale search for the appropriate ankle protection and buffer has many sneakers to choose from.The characteristics of people such as can fly and can jump forward is that they are good at bouncing, good at air assignments, and weighing too much weight.The need for sports shoes required for this category should pay attention to good cushioning and good ankle protection.

3. Speed type

Choose a lighter but can provide appropriate support for sneakers and flexibility.The characteristics of speed guards and small forwards are characterized by fast speed and sudden changes in various positions on the field to find opportunities.If you belong to this type of basketball shoes, you should pay attention to lightwear, shoe -type parcel feet, and shoe outsole stable and focus on comfort.

4. Place conditions

Because many basketball enthusiasts play sneakers in Outdoor cement fields, the abrasion resistance of Adidas shoes with equivalent non -slippers has been recognized in recent years. In recent years, Nike has also launched many specialized Outdoor basketball shoes according to the needs of Outdoor basketball.It is characterized by Outdoor basketball shoes. It is thick and large friction.The abrasion resistance of basketball shoes depends on the application of specific materials.For example, TPU outsole and miracle rubber have high wear resistance.

5. Practical and combined

With the development of shoes -making technology and the wide use of basketball shoes, the function of various new materials has become more and more powerful.Don't just pay attention to style and star effects and ignore the basic use of basketball shoes.

[Jordan basketball shoes recommendation & gt; & gt;]

How to choose a raincoat

1. Waterproofing, this is the most basic

It cannot be called riding raincoat without waterproof.riding raincoat is not an ordinary coat. As long as the style is popular in style, it is so simple. When choosing a ride on a raincoat, it is the first to look at its waterproof performance.When choosing, check it out carefully to see if the gel strip in the ride raincoat is flat and whether there is a foaming phenomenon. If not, try it.Whether the performance is passing.

2. Look at the cuffs, the constant temperature effect

As we all know, riders are keen to ride all year round, so even if you buy in summer, you need to consider the warmth of winter.Check that the way to watch the cuffs of riding raincoat is not suitable, because in winter, riders need to wear gloves. If the cuffs are tightened inappropriate, it will affect the overall warmth effect.

3,RideDo not choose a raincoat with a hat

The raincoat as a professional cycling is actually different from ordinary Raincoats with conjoined hats. riding Raincoats and cycling Raincoats are worn separately as the best settings.It can not be fully put on the helmet. Even the design of the shrinking rope is easily blown by the wind, causing great hindrance to the cycling.

4. Look at the zipper, pervasive

The main zipper riding raincoat either uses waterproof zipper or use plackets to prevent rainwater from penetrating.If it is a normal zipper and a placket, pay attention to whether there is a backfolding side at the placket. This design allows the rain to flow down the folding edge without penetrating into the zipper.

The split raincoat is good or a conjoined raincoat during cycling

The conjoined raincoat is very good, but the disadvantage is heat and stuffy.

The split raincoat is not hot, and it is convenient to wear it, but waterproof is not as good as connecting.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;