1. The breeding method and precautions of potted osmanthus flowers

1. Siric acid soil

Choose slightly sour soil in the planting method of potted osmanthus to allow osmanthus to better grow.It is usually selected to prepare the humus soil, sand soil and its rotten Fertilizer according to the ratio of 4: 3: 3, so that it will form fertile and loose soil with slightly acidicity.

2. Timely topdressing

Potted planting osmanthus needs to continue to add nutrients to replenish it, so that osmanthus can be fully nutritious and thrive.During the growth process, the thin Fertilizer is added for about two weeks. The Fertilizer mainly chooses nitrogen fertilizer, and the amount of phosphorus and Potassium fertilizer should be added to the flowering period to better flowering.

3. Temperature light

The planting pottery flowers also provide suitable temperature lighting to control the temperature of its growth environment between 15-20 C, so that osmanthus can grow normally.It is also necessary to provide it with long -term sunlight, so that it will grow strongly to bloom, and to cover it in a moderate light in strong light.

4. Pruning branches

When breeding pots, it is usually trimmed in time to keep the branches in time to keep it in good plant types for viewing.In spring, it is necessary to cut off its dense branches, weak and weak branches and old branches. After blooming in autumn, the residual branches must be cut in time to make it better.

5. Cutting reproduction

From May to June of spring and summer, potted osmanthus can be made from cutting and breeding, cutting cuttings of about 8 to 10cm from osmanthus trees from osmanthus trees to ensure that the branches are healthy and thick.Then remove its leaves, only the top 2 to 4 tender leaves at the top is retained, and it is cut into the sandy soil. After the watering and moisturizing, the branches will take root.

2. How to trim the potted osmanthus flowers

1. Pruning during the seedling period

Potted osmanthus management should be trimmed regularly during the seedling period, shortened the long and too fast to keep it flat with other branches, and cut off the excess side branches, so that the nutrients can be even more nutrients moreConcentration, the seedlings grow better.

2. Pruning during growth

Its growth period must also be trimmed.At this time, the main trimming is the long and too dense branches, cutting it off one -third, so that the entire plant can be better, even more uniform, and better ventilation inside and absorb light.In addition, cut off branches without buds together, so that it can bloom better later.

3. Flower period trimming

During flowering, it is found that branches without flowers can be cut off. This can save nutrients to a greater extent and provide nutrients to branches that are blooming, which prompts the flowering period to be longer and the fragrance is more rich.In addition, it is necessary to observe diligently and find that weak flowers and residual flowers must also be cut off, prompting nutrients to concentrate.

4. Pruning in winter

During the management period, it must be trimmed once every year before the winter, mainly because it is trimmed to open the flower branches, and only one main branch is retained in winter.Cut off the two branches and side branches under the two below.And after winter, you must also trim the branches that are aging to save nutrients as much as possible, so that you can grow better in the coming year.

3. How to fertilize potted osmanthus

1. Permanent and diligence

When applying the potted osmanthus, pay attention to the thin Fertilizer and dilute the Fertilizer, and then apply it in a small amount after diluting the water.Usually it can be applied for thin Fertilizer for about 2 weeks. Do not use thick Fertilizer to raise Fertilizer. To avoid the roots of the potted osmanthus, the roots of potted osmanthus are burned by Fertilizer, causing poor growth.

2. Fertilize timely fertilization

In the spring, the new buds of osmanthus potted plants should be applied more to apply nitrogen fertilizer to promote the rapid growth of its branches; when its strong summer and autumn festival, more Compound fertilizer or full element flower Fertilizer must be applied to make it full of nutrients to thrive; when the flowering period, it can beApplying more phosphorus and Potassium fertilizer to promote the differentiation of flower bud differentiation.

3. Leaf surface pursuit

Pay attention to the fertilization of potted osmanthus for the potted osmanthus, and pay attention to the leaf surface to pursue the leaf surface. You can choose calcium phosphate, Urea or ash solution to reduce the concentration of water.Spraying can uniformly absorb nutrients and full of vitality.

4. Watering after fat

After each fertilization, water the potana potted plants once. First of all, it can avoid the accumulation of Fertilizers in the pot soil, so that the potato potted plants can be suffered from Fertilizer; secondly, this can help the osmanthus potted planting, So that the root system absorbs and grows, and becomes strong.

5. precautions

When fertilizing, pay attention to fertilization at night to avoid absorption of high temperature weather, and apply Fertilizer once in winter to help it go through the winter.It is also necessary to pay attention to the Fertilizer of the osmanthus potted plants when the root system is exposed.

1. The breeding method of Yuyemei

1. Soil: elm plums are not strict with the soil, but they are not resistant to waterlogging.

2. Watering: elm plums avoid waterlogging and plant in spring. If the weather is dry, water should be poured 2-3 times. Usually do not need to water. At the same time, pay attention to drainage in the rainy season.

3. Sunshine: Elfuria can be given sufficient sunshine in the three seasons of autumn, winter, and spring. When maintenance indoors, try to place it in a bright place.

4. Temperature: Yuye Mei likes to warm the climate, but the high temperature and sultry environment in summer is not conducive to its growth. It has strict temperature requirements in winter. When the environmental temperature stops grow below 10 C, it cannot be saved under the frost.

Second, the growth habits of Yuyemei

The elm leaves are purple -brown, the leaves are wide and oval -shaped to ovate, the single petals to severe purple -red, and the nuclear fruit red close -spherical.Hi Guang, slightly yin, cold-resistant, can go down winter at -35 C.It is not strict with soil, and it is better to be neutral to microdienal and fertile soil.The root system is developed and the drought resistance is strong.Not resistant to waterlogging.Strong disease resistance.Born in the slopes or grooves, under the low to the middle and altitude, under the shrub forest, or forest, China is made in Heilongjiang, Guizhou, Liaoning, Inner Mongolia, Hebei, Chongqing, Shaanxi, Gansu, Shandong, Jiangxi, Hunan, Guangxi and other places.

Third, the maintenance of Yuyemei

1. Pests: The diseased and insect pests of elm plums are brown spot disease, white -patterned feathers, aphids, thorn moths, red spiders, leaf moths, etc. Generally occur in summer and autumn.

(1) Dark spots: Strengthen water and Fertilizer management, improve the plant resistance of the plant. At the end of the autumn, clean the leaves, and spray 5 waves of icomite stone sulfur agents to prevent it before the spring buds.Sen zinc can be wet grained 700 times liquid, or 70%of the 500 times liquid of Mori Manganese and zinc is sprayed, sprayed every 7 days, and sprayed 3 to 4 times in a row to effectively control the condition.

(2) Root cancer: To strengthen the quarantine in the process of seeds, seedlings transportation, cultivation, etc., we must strictly prevent diseases with diseases and seedlings enter the cultivation place.On the plant, it is necessary to remove its tumor -shaped object with a disinfection Tool, and then apply white or Portoly liquid on the disease.

(3) Leaf spot disease: In the winter, combine with plant pruning and tideling of branches and leaves to remove the lesions and residues left during the onset of the onset, and concentratedly burned.During the growth of plant growth, we must strengthen field management. Pay attention to timely drainage in the rainy season and fertilize in moderation to enhance the disease resistance of the plant.In the early days of the plant, 75%methyl butybadin wettable powder should be sprayed in time, or 800 times the liquid of 75%peribilobe clear wettable powder was sprayed.

(4) Aphids: If a large amount of aphids are found to be harmful, chemical prevention should be performed. In the ratio of 1:10, soak the tobacco leaves, and spray it for about 5h.It can be used to kill aphids with 1500 times liquid, or use a ratio of 1: 3: 300 to prepare a solution of laundry powder, Urea, and water for spraying.

(5) Red Spider: Red spiders can breed quickly. Weeds, plant branches and other environments can be reproduced. Its harmful plants can be mixed on the plants at the same time.Water (ratio 10: 1: 1: 40) Stir well and use it. Tu white can prevent the old cooked larvae from overwintering in the shallow soil layer, and can prevent the larvae of camphor clumps in the spring.40%trichloroly glycol lactation 1500 times liquid to kill red spiders.

(6) Moth: The moths are prone to harm the plants under high temperature and dry climate conditions, and they mainly harm plant leaves.When a small amount occurs, artificially remove worms, eggs, and concentrate.When insect pests occur, spray 2050 times liquid to kill chrysanthemums during the occurrence of larvae, or 85%of the enemy's downs of 900 times liquid, or 80%of the 1500 times liquid of the enemy -enchanting.

2. Pruning

During the growth of elm, the branches should be trimmed. After the flowers, the flower branches must be appropriately cut, and 3 to 5 buds can be left on each healthy branch.After entering the , make another pruning and top topics to concentrate the nutrients and promote the germination of flower buds.

1. How to buy Outdoor Furniture

1. Material

When buying Outdoor Furniture, you must pay attention to the material. Outdoor Furniture is placed outdoors for a long time, and the wind will not avoid the wind and sun.Aluminum and resin are the easiest to take care of, and wicker woven or woody furniture requires regular maintenance.If you consider price factors in terms of wood selection, domestic Metsmark or pine wood is generally selected.If the crack is good and strong, you can generally choose to import camphor wood, pineapple grid and so on.Metal materials generally include general steel, stainless steel, aluminum alloy, cast iron and aluminum.Pu steel and cast iron are easy to rust. The aluminum alloy rust has better anti -rust resistance. The rust resistance capacity of cast aluminum and stainless steel is stronger, but the price is more expensive.

2. Climate

Consider what the weather where you live, will it often rain, is it located in tropical, and hot and hot?The direct sunlight will crack the wooden furniture, and the temperature of the metal material will rise under the roasting of the sun, and it will not be comfortable to use. If you live a tropical storm, strong opposite weather or near the seaside, instantaneous instantaneous onesThe wind may also overturn aluminum or plastic.

3. Space

Outdoor Furniture generally does not have special functional requirements, so you don't have to match the tables and chairs and benches, or you need to match the size proportional furniture according to the size of the space.Whether it is an open Outdoor pool or a limited atrium small garden, you must remember to leave the area of the event.A tall bar table is better than the official dining table, because placing a stool is more space -saving.

4. The venue

Consider whether your Outdoor Furniture is placed on a soft lawn or a hard ground. If on the lawn floor, do not use the cork frame furniture, the cork will absorb the moisture, and then cause the frame to be damaged. Try to choose the imitation vine and aluminum framework.Replace.

5. brand

Choosing any product is the same. Choosing a brand that always makes people feel more assured. brand companies generally pay attention to quality, services and related reputation.However, the Outdoor Furniture industry is relatively late, and there are still many stages of development. There are not many real brands, so consumers must choose cautiously.

2. precautions for the purchase of Outdoor Furniture

1. Outdoor Furniture should be matched with decoration style

First, make decisions based on your own decoration style.Although Outdoor Furniture is used for Outdoor, it also has a certain relationship with the overall decoration of the house.If you want to place an Outdoor product on the balcony or courtyard, then when we choose, we first look at what type of home decoration is.

2,Outdoor FurnitureThe size must not be too large or too small

Secondly, the size of Outdoor Furniture must be considered.The choice of Outdoor Furniture should be determined according to the area of the balcony or other Outdoor areas.If the furniture you choose is too large, it takes time to change; if it is too small, it will look a little bit atmospheric.

1. How big granules are used for perlite to raise flowers

First, we need to understand the characteristics of perlite.Square is a natural volcanic rock that formed after high temperature expansion.Because of its internal gap, the perlite has good water absorption and drainability.At the same time, perlite mixed in the soil can also effectively prevent soil plate knots, increase the oxygen content of the soil, and provide a better environment for the growth of the plant root system.

Then, for the size of the peak particles for flowering flowers, generally, the granules with a diameter of 3-6mm are the most suitable.Such a particle size can ensure the porous and water absorption of the perlite, but it will not be too large or too small to affect its effect.If the perlite particles are too large, the drainage may cause poor drainage, and too small particles may affect its water storage.

Therefore, when choosing perlite, we should pay attention to its particle size to ensure that it has good ventilation, drainage and water storage performance, so as to provide the best soil environment for the growth of plants.At the same time, we must also pay attention to the choice of reliable and polluting suction products to ensure the healthy growth of plants.

Second, perlite to raise flowers with flower soil ratio

Plane is an acidic lava sprayed by volcanic, named after its unique pore structure and pearl -like luster.In the field of Gardening, perlite is often used as mixing medium to improve soil breathability and moisturizing.So, what is the proportion of perlite for flowers with flowers and soil?

The proportion of penetrating flowers with flowers and soil is not fixed, but it needs to be adjusted according to the specific situation.Generally speaking, the mixed ratio of perlite and other soils (such as garden soil, rotten soil, etc.) can be between 1: 4 and 1: 1.If perlite is the main raw material, it is recommended not to exceed 50%to avoid affecting the stability of the soil and the supply of nutrients.

In practical applications, the best soil proportion can be determined according to factors such as plant growth needs, soil conditions, and the quality of perlite.For plants that are stretched and afraid of stagnant water, the proportion of perlite can be appropriately increased. For plants that need more nutrients, the proportion of perlite should be reduced and the nutrient -rich soil should be reduced.With the growth of plants and the changes in the soil environment, the proportion of perlite mixing soil may be adjusted to meet the growth needs of plants.

Third, what flowers are suitable for suction

Many flowers can be cultivated with perlite, especially those flowers that need good drainage.For example, Lanflower, Gardenia, sunflowers, aloe, stone bamboo, Milan, agave, dwarf cattle, begonia, jasmine, daffodil, gentleman orchid, rich bamboo, cactus, succulent plant, rose, green dill, red palm, etc.In addition, perlite is also suitable for potted vegetables and fruits, such as tomatoes, Pepper, watermelon, etc., which can improve the ventilation and water retention of the soil and promote the growth and development of plants.

When planting flowers with perlite, you need to note that you do not use perlite to cultivate flowers that like alkaline soil, and do not use perlite as the soil matrix of flowers that like moist soil.Planes should be mixed with soil, and the proportion of mixed should not be too high, generally not more than one -fifth, so as not to affect the growth of plants.

How to choose a hamster cage

1. Style:The shape of the hamster cage focuses more focuses on and ornamental. From the perspective of a person rather than from the perspective of the hamster. After all, the cage is placed at home. Perhaps it is still more significant, so there should be some ornamental.

2. Material:The materials of the hamster cage include plastic panels and mesh wire. Too much plastic board will affect the permeability of the cage. Too much iron wire will increase the chance of the haouse biting cage.

3. accessories:The hamster life must be small nests, basin, Running wheels, bathrooms, and water drinks, but not the cages are all equipped. When the accessories are not complete, they need to be purchased separately.

4. Details:The details of the hamster cage are mainly the level of craftsmanship, which focuses on the difficulty of the cage disassembly and the humane design of the cage.

Which cage is best to raise hamsters

1, 47 basic cage

The 47 basic cage is the highest cost -effective, with a total length of 47 cm, and the space is large enough. It is very suitable for hamsters to move inside.At the same time, the owner can set up toy equipment inside, which will not make the hamster feel oppressive, and it can also heat the heat.

2. Acat Cage

The acrylic cage is relatively transparent, you can observe the every move of the hamster, and its face value is very high, not as thorough as the basic cage.However, its breathability is poor, and this cage needs to prevent heat prevention for hamsters.

3. Pipe cage

This is the combination of the foundation cage and acrylic cage. It can not only observe the hamster, but also meet the habits of hamster drilling holes well. It is more suitable for hamsters.

How old is the hamster cage?

Little hamsters do not need to buy too large cages, just pay attention to keep warm and have a hidden space that can rest.However, when the hamster grows to a certain amount, you need to consider replacing a large and more complicated hamster cage. The hamster cage needs to be put in the Running wheels, drinking water heaters, pots, small bedrooms, etc. Space for hamster activities, such cages are almost the same.

How to install hamster cages

Step 1: In a relatively spacious place, take out all parts, mesh, chassis and other items, and check if there is any omissions and classify it according to the instructions of the purchased hamster cage.

Step 2: Place the chassis smoothly on the ground and install the side plate. Pay attention to the uneven groove of the side board and the chassis, one by one, and then place the mesh board from top to bottom in the side board bracket.

Step 3: Install the food basin on the chassis, install the kettle fixed buckle according to the position of the basin, and then install the kettle with water to check whether the water leaks, and directly put the kettle in a fixed buckle.

Step 4: The Running wheels are assembled according to the instructions, and the installation is completed on the mesh.

How to clean the ham cage

1. clean up during feeding

There are food residues, excretion, wood chips and other garbage in the hamster cage. Over time, it will breed some bacterial virus infections, which is not conducive to the healthy development of pets. Therefore, we need to clean it often. When you seduce, lead it to the other corner of the cage, and then you can use a small shovel to shovel the garbage and wood chips, and then use a brush to clean it.When cleaning up, the movement should be lighter to prevent hamster from eating.

2. clean thoroughly

cleaning thoroughly is to move the hamster into another idle cage. If you have cultivated deep feelings with it, you don't have to bring your gloves and transport them away. Open the open, and those who can take it out, like drinking water, the groove bowls of eating, the groove bowls of the meal need to be sorted out, brush them, and pour all the wood chips and dirty garbage. Finally, place it in the sun.

In the process of cleaning, if the stool or dirty things can't be stained on it, soak in the water in advance, soften the stool, and then use a brush to brush it. Foam, scrub with rags, and then wash away all the foam with a lot of water.

A cage can raise a few hamsters

A cage can raise a few of them to see what hamsters are, and the habits of various hamsters are different.Take the golden rat, it is a lone animal, and it attaches great importance to the site between adults, so it cannot be raised, at most 2, one male and one mother.Otherwise, there will be a Battle, and it will usually stop until death.

How to make a hamster cage

1. Buy a medium -sized tidal box. The material of the box is the best in aluminum, and the material of the PVE is also available.

2. Put the tidal box, and use the flashlight drill very conveniently.

3. Put the windmill rotor in the organizer, and prepare props, feeders and other props.

4. Finally paved the fragmented wood chips to help the hamster keep warm, and a hamster nest was ready.