Nursing method of common symptoms of geckos

1. Eye infection

Eye infection is a common leopard disease. Symptoms include: swelling of the eye, flowing water, turbidity, and weakness.Eye infections may be caused by sand and dust entering the eyes or rubbing hard objects. Eye infections are difficult to cure. It is best to ask veterinarians for examination, or find another veterinarian!You can try the following methods, but not necessarily useful, because you don't know what the exact root of its eye infection is.You can rinse the infected eyes with saline; whether the temperature of the breeding box is in place, it may have respiratory tract infection, making the eyes unable to open; expose the palace in the sun for a short time, and the lack of natural light may make the body lack in the body.A certain element; a small amount of antibiotic drugs; appropriately supplement vitamins to the guardian palaceB-12, To improve its appetite and physical fitness, it will help recovery.

2. Skin infection

Skin infection is usually caused by two reasons:

The cushion is too humid.When the cushion is too wet, the abdomen of the palace will always be in a wet state. In addition, it will often rub with the pads.Brown or black spots.

2.Skin scratching or molting is incomplete.The toe parts are particularly susceptible to bacterial infection due to the humid and old leather residues, and the symptoms are manifested by redness, rotten, and pus in the Skin.Discover the above symptoms, you can try to transfer the palace to a clean environment; use a napkin as a cushion, and apply a small amount of polyhone iodine or new buds to the affected area to play a role in anti -inflammatory.

Third, digestive tract disease

The state of the excrement will be slightly changed due to the type of food.If you observe that the excrement is liquid, loose, or even the blood or excrement is green, which contains unlimited foods, then your palace is mostly diarrhea.Diarrhea may be caused by inflammation or parasites in the body.After discovering diarrhea, you can try to stop feeding the palace and observe the situation.If the palace still shows fatigue, you can try to stuff a small amount of ginger water for the palace.

If you have observed the loose sand and gravel of the palace repeatedly, and you have used sand (small particles) cushions, then this is likely to be caused by the pecking of the palace.Most of the pecking pads in the palace is due to calcium deficiency in the body; you can take some calcium powder and vitamins for the palaceAAnd replace more secure mats.

1. What kind of plants do you raise in the door?

1. Gold diamond vine green velvet

Golden Diamond Green Velvers belongs to Tiannan Sinology, Xilin taro is plants, alias gold diamonds, Xishujiao, etc. It is currently more popular indoor leaf -viewing plant; its leaf quality is thick and Emerald, the leaf surface is rigid and beautiful, and the petiole is long and thick.Arranged indoors, generous and elegant, full of tropical rain forest atmosphere.Gold diamond vines can also absorb various toxic gases, such as sulfur dioxide, sulfur dioxide, nitric oxide, etc., which plays a role in purifying the air. Therefore, it is called the "Evil King"., Hotels and other places.

Note: The leaves of its leaf juice will be poisoned, and the roots and leaves are toxic.Touch or eat its juice into the pharynx and mouth discomfort, severe suffocation, causing heart paralysis, and even death.Itching or strong irritation of the Skin will cause itching or strong stimulation. The contact with the juice of the eyes can cause severe conjunctivitis, and even blind. Families with children should not be planted.

2. Exquisite cold water flowers

Some people call it "baby tears", and the exquisite cold water flowers mean peace and happiness.Scenery is the sky, and the appearance is green and soft, so it is also known as the baby's tears.It is round and ovate. The diameter of the leaves is about 0.6 cm. It is very small, thin, and the meat is raw, light green, densely born on the stem vines. The leaves are Smooth and shiny.The stems of exquisite and cold water are vain. They are good mortar plants. They are easy to take care of and have little disease and insect pests.

Note: Do not let the strong light directly illuminate, it is best to place it in a moderate shade. It likes the environment with high air humidity. If the weather is dry, spray water on the leaf surface to increase the air humidity.

3. String Qian Teng

The Qian Qi vine means "recruiting wealth into the treasure. It is native to Australia, also known as the button vine, buttons of jade vine, and millions of hearts.Hypented and succulent, plant tools, can grow or fall to grow, yellow or white flowers in spring.

Note: The color of the vines and vine leaves is young, and the sex is humid.The cultivation matrix generally uses good ventilation materials, and can be used to prepare Nutritional soil with snake wood and mixed with perlite.

4. Phalaenopsis

Phalaenopsis is the genus of Origo Phalaenopsis, and Phalaenopsis can make the house full of anger from the outside to the inside.The name "Butterfly Flower" has the connotation that many people don't know. The scientific name of Phalaenopsis is "like butterfly -like orchids" according to the original meaning of Greek.Native to the subtropical rain forest area, it is epidaca orchid.Phalaenopath's white and thick air roots are exposed around the leaves. In addition to absorbing nutrients in the air, it also has growth and photosynthesis.In the Chinese New Year, the Phalaenopsis plants were pulled out of the leaf axillary, and the flowers of the flowers like butterflies danced were deeply favored by the fans of the flower.Distributed in Thailand, the Philippines, Malaysia, Indonesia, and Taiwan, China.

Note: Phalaenopsis can protect the stress that it is affected by the stress under low humidity, but in a too humid environment, high temperature and high humidity are often accompanied by disease.The most suitable relative humidity range is 60%to 80%RH.

5. Baihe taro

White crane taro, alias: white palm, budo taro, Smooth sailing.Gives the beauty of "pure, peaceful, peaceful and peaceful Antai", is regarded as "innocent flower".Because the people feel that the Smooth sailing has a auspicious meaning, it is named "Smooth sailing" according to the image of its flower.It is a perennial herbaceous plant in Tiannanxingke and White Crane taro, white crane taro green leaves, and white Buddha flame buds. It is very fresh and elegant. It is an important ornamental flower in the world.It can also filter the power of indoor exhaust gas to deal with ammonia, acetone, benzene, and formaldehyde.In the early 20th century, it began to be applied to potted viewing. By the 1980s, it was very popular in Europe. It regarded white crane taro as a "innocent flower", which has the meaning of pure, calm, peaceful and peaceful Antai.

Note: Baihe taro is high -temperature and humid and semi -yin environment.Baihe taro leaves are large and are sensitive to humidity.When high temperature and drying in summer, spray more water to ensure that the air humidity is more than 50%, which is conducive to the growth of the leaves.When the high temperature is dry, the leaves are easy to curl, the leaves become smaller, withered and fall off, and the flowering period is shortened.White crane taro is afraid of strong light exposure. In summer, it shades 60%to 70%, but long -term light is insufficient. It is not easy to bloom soil.High temperature and humidity and semi -yin environment.

6. winter coral

winter coral, currently known as Ji Bean, is also known as Ji Qing Guoji, represents festiveness and auspiciousness.If the fruit is hung for a long time, it also symbolizes health and longevity.Small shrubs, multi -branches are clustered, and are cultivated for 1-2 years.The plant height is 30-60 cm.Ye is alternate, narrow and round to inverted lanceolate.summer and autumn flowers, small flowers, white, axillary.Beat, dark orange -red, spherical, diameter 1-1.5 cm.As a result, after flowering, it does not fall for a long time, but it can be left after the branches until the spring Festival.

Note: winter corals are like sunlight, warm, high temperature resistance, no sun burning above 35 C.It is not resistant to yin, cold to resistance, no drought resistance, and hot summer is afraid of rain and waterlogging.The soil requirements are not strict, but it grows strongly on fertile and loose, well -drained slightly acidic or neutral soil.Strong nature.It is not cold -tolerant. Potted plants in the north need to enter the greenhouse to overwinter.

7, triangular arrow

The three -edged arrow fairy palm family, the crowd of the heavenly ruler climbing polysexia.Multi -branches, triangular shapes, width and thin edges, wet -shaped; qi root on the stems, often uses gas roots to attach to trees or walls;Plants, native to Mexico and the West Indian Islands, are mostly cultivated in other tropical and subtropical areas, and Guangdong, Guangxi, Fujian and other places in China.

Note: There are sharp thorns on the fleshy stems. In addition, the white milk juice in the stem is poisonous, and it is not particularly eye -catching. Therefore, in family training, the juice is poisonous and cannot be entered. Therefore, in family training, avoid children and the elderly to be poisoned.For the house between the newly renovated family and the office building, the keel is still a good purification air for the house and the house between the newly renovated family and the office building.Put on the balcony or the gate of the gate to wake the evil.In the case of sharp corners, it is facing Tianzheha, and white tiger.

8. Yellow Naps Fairy

Yellow Narcissus, also known as Sterilizers, Horn Fairy, etc., and the family of stone and garlic.Blinds spherical; leaves upright, wide -line, blunt head.The flower stem is about 30 cm high, and the flower is raw at the top; the flame -like buds; the flowers of the flowers are pouring in the Tube.In the spring of the flowering period, the window sill, balcony and guest room with it are particularly beautiful and elegant.

Note: Yellow Narcissus's response to light is not sensitive.In addition to the long -term sunlight, the flowering period is better.The long -term light is insufficient, and the leaves are soft and sagged, but it has little effect on flowering.The soil is fertile, loose, well -drained, and richer in humic acidity to microbia sandy loam soil.

Second, porch contraindication plant

The thorns of plants represent the great fierce, so the porch cannot place thorns such as cacti, roses, and rhododendrons, so as not to destroy the Feng Shui there. Moreover, the porch plant must keep the green.If it is polluted, it should be carefully cleaned. The decorative flowers should be the best with white.

Fern and Gejo plants should not be planted, because such plants are particularly easy to reproduce and will be very lush. Once they grow up, they will recruit diseases and insect pests, mosquitoes and other interference. The experience is not good.

Third, the principle of Feng Shui placed in porch

1. Choose plant types

The plants placed in the porch are more round stems and leaves. It is appropriate to use needles, sharp corners, vines, or thorny plants. Otherwise, it will affect the happy atmosphere of the family.The harmony of the family will also affect the emotional fortune of unmarried people in the family. Generally, broad -leaved plants should be placed in the porch.

2. Place the number of plants

Plants are placed in the porch, and small and medium -sized potted plants are generally selected. At the same time, pay attention to avoid placing too much plants in the porch, otherwise it will feel messy.Excessive plants will also affect the airflow of the porch, which will make the porch's yin heavier, which will cause yin and yang to decay.At the same time, pay attention to avoid excessive and high plants in the porch.

3. Plant color effect

The plants placed in the porch should follow the unity of color to avoid placing a variety of color plants at the same time, otherwise it will cause the porch gas field to mess.The green plants in the porch look vibrant, while red flowers can make family members sober thinking, but feel comfortable, pink flowers are good for love, and yellow flowers are beneficial to the wealth of the house.

[bamboo and Teng Furniture Craft] Basic structure of bamboo vine furniture manufacturing process

Basic structure of bamboo rattan furniture

1. frame structure

bamboo and vine furniture frameworks are not only used to reflect the appearance of the furniture, but also the main force components. Therefore, the reasonable or not of the frame structure directly affects the aesthetic function and use function of the furniture.The framework structure of bamboo and vine furniture has two categories: bending and co -combined with direct materials.

(1) Heating bending structure

Quick, time -saving, and labor -saving technology can not only maintain the natural beauty of bamboo and vine material, but also maintain the strength of the material. Therefore, this form of bamboo and vine furniture is particularly suitable for processing and production of bamboo and vine materials, but butIt is not suitable for bending of large -diameter bamboo and vine materials, and it is easy to burn the Skin of bamboo vine section, which affects the beauty.

(2) Open groove bending structure

This method is mostly used for the bending and horizontal frame of the legs and feet of the bamboo and rattan furniture framework.The processing process is relatively complicated, and to a certain extent affects the strength of the bamboo and vine frame, it is mostly suitable for the bending of large diameter bamboo vine materials.If the horizontal component is curved, pay attention to all the grooves in the interval position, and keep it on a longitudinal line.quality.

(3) Open a triangular groove bending structure

On the inner side of the bending part of the bamboo and vine section, the uniform saw the toothicular port of the canine, bend the bamboo vine section into the inside after the bending part of the fire, and then cool it.This method is also suitable for bending large diameter materials.It is also easy to damage the strength of the bamboo and vine section, complex processing, and high process requirements.

Second, plate -shaped structure

bamboo and rattan furniture combines a single, fragmented bamboo component into a larger area layer through a plate -like structure(( plate Cure Fully reveal the texture characteristics of bamboo and vine materials.This structure is important in function and decoration, so it must be carefully processed to meet the requirements of design and use.There are many types of board components, corresponding to a certain process method. The commonly used is bamboo strips, bamboo row boards, round bamboo and bamboo chips, mahjong blocks, editors, and plywood.

bamboo rattan furniture manufacturing process

The first step is the selection of materials and feeding.Choosing bamboo is very particular. Zhu Ling cannot be used for a year or two. At least it must be more than three years, and it is best to be the bamboo in the middle of the bamboo garden.Skilled craftsmen enter the bamboo garden and only need to grab the bamboo with their hands to shake it, and they can judge Zhu Ling.Choose the right bamboo, and you need to follow the types of the product.The basic algorithm of "one foot" is placed.

The second step is to split the cricket, which is about to process the bamboo as a filament or slices.Wash the bamboo first and grave the bamboo scars.The split is very particular about the skills.Spread among folk artists"Don't be tall, one inch of three knives".The thin bamboo slices can be peeled up to dozens of layers in the hands of the craftsmen, using their mouth bite, hand pulling, and knife festival.However, weaving daily necessities generally only use three to four layers, and weaving crafts can be used for 6 to eight floors.Picking the pupa is to use the knife, hold the bamboo sheet with a bamboo slice, pull it back in the right hand, and process the filament or slices as wide as width.I picked it up, and then scraped it.The artist uses a scraper to scrape the silk or the slices smoothly, shave the thickness evenly, and can scrape out the round, flat, and .In order to prevent moth and mildew, it is also cooked.Put the split -to -chop in the pot and cook it. Remove it and dry it.

The third step is weaving.There are many weaving techniques for Jingjiang bamboo, and the content is very rich.Master of the Craftsman uses vertical latitude and weft, hexagonal six -party editor, triangular eye editor, tiger's eye editor, multilateral money eye editor, corner three -dimensional editor, rotary restoration editor, embellishment decoration Editing and other various compilations, the long bamboo silk instantly forms a variety of patterns, making you dazzling.During the weaving of crafts, bleach and dyeing are needed to be used for filament or slices.It can be drifted first and then edited, or then drifted first;Finally, dry and spray paint, and then the bamboo crafts are completed.

1. What are the coverage of Shading nets?

In the southern area, the coverage of the shade net is mainly covered with floating surfaces, large, medium, and small flat sheds, large, medium, and small arch sheds covered, and there are also a small amount of greenhouse coverage.

1. Floating surface coverage

It refers to the coverage of the coverage directly on the ground or plant with a Shading net.The annual use of this method is mainly used for the coverage of vegetables from sowing to the seedling period, and the Shading net is unveiled after the seedlings.The effects of Shading, cooling, moisturizing, and riot rain in summer, the effects of preventing rain, heat preservation, and moisturizing in winter to create favorable conditions for seeds germination and seedlings.During the day, the method of unveiled at night to shorten the seedling period and improve the seedling rate. In addition, it can be used to cover the floating surface 7-10 days before the harvest of the late summer and autumn.

2. Single -type small flat shed covered

For the main coverage of leafy vegetables, bamboo poles, bamboo pieces, wooden sticks, cement columns and other materials can be used on the noodles of about 1 meter to cover the shade net.Generally, floating surface coverage after sowing or transplantation, the long-visited types of crops, weather and other conditions of the coverage time are depends on. The high temperature during summer and autumn should be covered by 15 days.Gaerry and cauliflower are covered with 20-25 days. Symphony, small mustard, lettuce, kale, celery, etc. can be covered with full fertility period. When the weather turns cold in autumn, kale, mustard, Chinese cabbage, broccoli, cauliflower, lettuce, etc.Cover 15-20 days.

3. Zhongping shed coverage

Use 1.5-1.8 meters long, 0.33 cm Planted pipes to set up a simple flat shed on the noodles, cover the sunshade net, and the Shading net should be flat and straight, about 1.5 meters high.50 cm, preventing the typhoon from being blown down. This method is simple, the cost is low, the field operation is also convenient, and the ability to resist typhoons is better.Suitable for leafy dishes, early or full -blooming.

4. High flat shed coverage

The height is 1.8-2.0 meters, and the cement column with a length of 2.2 meters and a thick 12 cm X10 cm is used as a water pipe and iron wire fixed bracket.There are more materials, installation, and low ability to resist typhoons.Suitable for leafy vegetables to cultivate or eggplant fruits, early coverage of melon Beans, etc.

5. Small and medium arched sheds cover

It refers to the use of the skeleton of small and medium arch sheds as support, covering the coverage of the shade net.It is mainly used for seedling, transplantation, early cultivation of autumn vegetables or anti -season cultivation.The center of the small shed is about 0.5-1.0 meters high, about 1.0-1.5 meters wide, 7-8 meters long or base blocks.The center of the middle shed is about 1.0-1.5 meters, 2-3 meters wide, 10-15 meters long or base blocks.

6. Greenhouse coverage

It refers to the use of cement, steel, etc. to cover the shade net for skeleton materials or cover the Shading net on a plastic film greenhouse.It is mainly used for seedling, summer and autumn vegetables delayed or early -maturing cultivation, and can also be used for some vegetables such as leafy dishes or some fruits of winter and anti -season cultivation.The center is about 2.5-3.0 meters, 6-12 meters wide, 40-55 meters long, and covers an area of 333.3-666.7 Square meters.

7. Greenhouse coverage

It refers to the coverage of the Shading net on the greenhouse.It can be divided into two ways: flat sheds on the top of the greenhouse and the flat shade net sky curtain in the greenhouse.Outdoor coverage is better than indoor coverage. It is good for ventilation and heat dissipation and cooling.It is mainly used for anti -season cultivation, postponed cultivation in summer, or early -maturing cultivation of autumn vegetables.

2. precautions for covering the shade net in summer

Covering the Shading net is the most commonly used cooling method in the high temperature season, but the wrong coverage method will affect the cooling effect and even play a negative role.

1. It is best not to close the shed

Black Shading nets absorb more heat, which will directly pass the heat to the shed to shorten the life of the shed film. At the same time, the heat of the coverage of the shed is slowly disappeared, and the ideal effect of cooling down can not be achieved.

How to use it correctly: It is recommended to keep a distance of 0.5-1 meters from the shade net and the shed surface to ensure that the air between the shade net and the shed surface can flow, which can accelerate the loss of heat in the shed, but also achieve a good Shading effect, reduce the shed shed sheds, reduce the shed sheds.Heat is hot.

Practice has proved that compared with the setting of the shade net and the shed film, the temperature in the former is 5 C or more than the latter.

How to make the shade net and the shed film open?

When a single greenhouse is covered with a Shading net, vegetable farmers can put two earth Bags with two film pressure membranes on the steel frame structure or large bamboo pole at a certain distance.

For bases or parks and places where greenhouses are relatively concentrated, automated Shading equipment can be used.During the specific settings, the steel pipe stent is preset at the back wall, the gables on both sides and the front face, about 1 meter from the shed, and the shed surface is equipped with a steel wire, covering the shade net on the steel wire, and the support network is set at 0.5 meters.Rope to fix the Shading net.

Finally, install the nose of the machine on the steel pipe at the front face of the greenhouse. In this way, just hold the remote control and press the button to easily complete the stretching of the shade net.At the same time, the Shading area can be flexibly adjusted in combination with weather conditions.

2. The Shading time should not be too long

The coverage of the shade net is too long, which will affect the photosynthesis of vegetables and is not conducive to the normal growth of vegetables.Vegetable Shading should be combined with weather conditions, vegetable types and vegetable growth stages. The requirements for light intensity and temperature are flexibly grasped.

Materials used for Shading, such as Shading nets, generally use sunny covers and unveil on cloudy days; lid at noon, in the morning and evening;If there are many rainy weather and the temperature is not too high. After the vegetables are planted, the shade material can only be covered in the slow seedling stage.In addition, when a long -term sun or root disease occurs, vegetable farmers can also use Shading nets to avoid the occurrence of plant withering.

1. What is an iron Flower stand

iron Flower rack refers to a grid grid with iron materials that compose a certain shape for home decoration facilities attached to climbing plants.

iron Flower stand can embellish bonsai.The design of the Flower stand should understand the origin and growth habits of the configuration plants to create conditions and requirements for plant growth.

It can be reduced and the metal surface can be reduced and the metal surface can be reduced and the decorative effect is called the protection and decoration of the surface of the iron shelf.For iron products, the method of surface protection and decorative comprehensive treatment is generally adopted.There are many specific treatment methods, but in terms of iron products, it is commonly used in painting and electroplating (heat plating). If the two are used together, it is best for durability.

Second, the characteristics of iron art stand

1. Non -metal protection layer

Painting a layer or layer of organic and inorganic compounds on the surface of the iron shelf, such as paint, plastic, rubber, asphalt, enamel, acid -resistant material, rust -resistant oil, etc.

2. Metal protective layer

Plated a layer of metal or alloys that are not easy to rust on the surface of the iron shelf, such as zinc, tin, nickel, chromium, copper, titanium, etc.Common methods are: electroplating, spray plating, hot immersion plating, etc., but the metal protective layer used on the iron Flower stand should generally be used as hot -dip galvanized.Because the professional oil removal and rust removal before being plated by the workers and high -temperature immersion in a 440 -degree Celsius zinc melting solution can cover many defects and gaps to avoid rust (especially suitable for Outdoor iron products to prevent rust prevention in the future (especially suitable for Outdoor iron products.), And have excellent attachment performance.

3. Chemical protective layer

A protective layer of non -metallic membrane is formed with chemical and electrochemical methods to form a layer of non -metallic membrane, such as black, blue, and phosphate treatment.

The protective layer obtained by the above methods itself plays a protective role and a certain decorative effect.However, for iron products, the majority of users are increasingly required that the surface of the iron art stand should not only prevent rust, but also have a variety of artistic effects such as three -dimensional sense, three -dimensional sense, or antique, or a gorgeous appearance.Therefore, on the basis of the above, the selection of the strongest and most aging paint brands and reasonable application methods from the thousands of paint varieties sold on the market and reasonable application methods are becoming more and more important.Only targeted choices will obtain the predetermined decorative effect and reduce the maintenance workload after several years.

Third, the method of making iron art standings

1. design

First think about what I like, whether it is Chinese, or European style. You can also search for a variety of iron art stands online, and then select one or more you like. You can copy or combine them in combination with themmodeling.The editor suggested that the paper and pens are prepared to draw the iron Flower frame in your mind first, and then use the CAD software to design the size and details of the Flower stand with CAD software.

2. Select material

Let's design the design drawings on the iron accessories market, and choose the style of the iron accessories with similar sizes on the design drawing.The selection of materials is a very important step. First of all, the material of the material must be good, that is, it seems that it is more tough. Considering the latter production process, Xiaobian recommends choosing a cooked iron type.Then the selected accessories should not be too thick and too heavy, because we are not a professional iron master. The shelf is too heavy to be a scattered shelf, but we cannot use the wire. It is too thin that it will be transformed by the Flower pot.

3. Production

This is still difficult for the average person, mainly because the equipment is not enough, and it is not available to technology.The so -called production is actually stitching the bought iron accessories in the form of welding.The editor suggested that the current of the welding machine should not be too large, and it is easy to burn the accessories, or the welding scar left is too large and unsightly.Small current, slow welding, small and beautiful welding scars, mainly firm enough.Note that the welding residue left after welding should be knocked off, otherwise it will be easy to leave and rust.It should also be noted that the electric welding light is too strong, remember to protect the eyes.

4. Paint

There are too many types of paint, such as hammer paint, plain paint, metal paint, gold powder and so on.If you have conditions, you can also paint with a spraying method, and the effect will be better.The editor considers that everyone has no equipment, so tell you a soil method.Go to the market to buy black metal paint and gold powder, and buy a few small paint brushes and diluents.First use the black metal paint to the bottom, apply all the iron art stand to the black paint, and then use a clean brush to dip the gold powder paint. Pay attention to the sparse hair and then brush it on the iron shelf gently to form a piece of strips.The golden veins are very good, mainly simple and convenient.The paint has a heavy taste. It can be placed in a ventilated place to dry, and the paint is dry.The iron Flower stand that belongs to your own merits!