The difference between Swimming goggles and diving mirrors

The difference between swimming mirrors and diving mirrors, the structure and principles of swimming mirrors and diving mirrors are different.

1. The diving mirror has a device with sealing nostril ventilation.

2. The sealing layout of the diving mirror is huge, and it is important to control gas and water density.

3. Differences in the scope of use and cover: The scope of the diving mirror is available underwater and the water, and the swimming moster can only be used on the water;Only cover the eyes and water isolate, and the water tightness is relatively bottom;

4. Differences for use: Diving mirrors are generally used with air respiratory Tube, diving respiratory and other supporting facilities. When used, they are generally required to use their mouth breathing gas.Use nostrils to breathe in the environment.The swimming moster does not have this requirement.

Therefore, the Swimming goggles cannot be used for diving mirrors, but there is no problem with the dive 5 meters 10 meters. If it is to play the bottom landscape of the island, you must get a diving mirror.In general, swimming mirrors and diving mirrors are firmly unable to replace each other.

How to choose swimming mirror and diving mirror

1. Choose the swimming moster

It is best to try the swimming moster. In addition to whether it depends on whether it is myopia, it also depends on whether there are cracks around the rubber ring around the mirror frame. Whether the elasticity of the Swimming goggles is too loose.There is a nasal buckle to increase, giving you the size.It is recommended to buy civilian goggles, because the civil frame has a rubber ring, which is more suitable for people who usually wear less Swimming goggles.

2. Selection of diving mirrors

a. Facial mirror style: single view window, double window.Single -view window mirror, the most visual field; the double -window surface mirror can replace myopia lenses, and the left and right degrees are different.There were too many window mirrors, but it is currently not popular, and the inner cavity space is too large.

b. The inner cavity space: the larger the inner cavity, the more restricts the field of vision. Pay attention to the inner cavity volume or test wearing in the manual, and feel whether the lens is closer to the face.

c. Whether it is suitable for your face: wear the previously selected facial mirror test, 45 degrees angle on the face, the facial mirror band to the front, buckle the face mirror on the face, the screen gas (can not exhale from the nose), reply to the face to replyOriginal, shake left and right, and see if the facial mirror is firmly sucking.If so, it means that the facial mirror fits your face.

Note: The snorkeling facial mirror and diving mirror are different.The lens of the diving facial mirror is performed over the water pressure test, which can withstand the pressure of 50 meters of water, and the snorkeling facial mirror generally onlyars the pressure of 10 meters of water.The edge of the diving facial mirror is made of silicone, and some snorkeling mirrors may be made of rubber, or there is a problem with the composition of silicone.When smelling the smell in the face mirror, the silicone should be tasteless. If the smell is pungent, it means that the material is wrong.The slight smell may be just the taste of talc powder on the silicone, and it should not be pungent. Please pay attention to the difference.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

Sport pants (TRUNKS, Sport pants, exercise pants, Slacks) is more focused on sports. There are special requirements for the material of pants. Generally speaking, sports pants are easy to sweat, comfortable, and not involved.The overall design and fabrics have a certain technological content, which is suitable for summer wear.The material of sports pants is more nylon and polyester.

The matching method of sports pants men's models

sports pants with a formal dress, and in the field of high -end men's clothing in double -breasted suits and gentlemen vests, who has thought about a motion trousers worn by a family on the runway?Is the best state of sports pants?Of course not.

Black pants complement each other with black shirts, and the hats, locomotive leather gloves and sneakers add youthful vitality.Also combined with sports pants and formal clothes, there are campus -style shirts and coats enough to evoke everyone's memory of the past.The tight top is quite sporty, the gray and black geometric pattern is full of modern atmosphere, making the drawing sports pants unusual.It is true that in the field of men's clothing that attaches great importance to traditional men's clothing, we cannot say that sports pants can be replaced by trousers and enter all social occasions, but at least these wonderful designs provide another possibility of wearing.

Tailoring difference between sports pants and women's models

There are relatively large differences in men and women, so there are different ways in the cutting process of pants. Let me briefly introduce the differences between men and women's pants and their structure.

Men's waist joints are higher than the waist joints of the male body than the male body, so that they decide that the pants of the same height of women's pants are extremely long than men's pants.

sports pants women's waist depression is significant than male, and the difference between the feed of the hips and waist is greater than the male body. The female body is full than the male back buttocks, the side buttocks are more external, and the hip peaks are lower than the male body.It saves a larger and longer quantity than men's pants, and the side slope of the rear gear is more sufficient. At the same time, the split potential outside the waist and hips of women's pants is larger than men's pants.

Because men and women have physiological differences, the concave potential of the front gear of the men's pants is determined that the front gear is greater than women, and the door towel is located in the front center of the front.men's pants are not available.

Selection of sports pants Size

How to choose sports pants size is better and how to choose the size of the sports pants that suits them. This is something that many people who buy sportswear for frequent online shopping clothes want to know, because if you buy online, you can not try it on your own.In some time, it is average or loose, so you don't have to worry about this when choosing.When buying sports pants online, you can tell customer service staff for sports pants size to choose from your waist circumference.

Generally, the size of the sports pants is divided into S, M, L, XL, XXL, or use numbers to indicate. At this time, if you buy it, do not look at the data above.The data out of the standard body are all standard figures, and most people are not standard figures. At this time, you can use the customer service staff to combine their actual situation to buy, which will be more convenient.Because the size of the sports pants does not necessarily say what person must wear, it uses loose to make the waist, as long as your hips are not super particularly large, then you can generally wear it.Short.

There are also many choices of sports pants size, mainly depending on what they usually need to wear, most of the time they can be worn.Because sports pants are more fashionable and casual, there are more people buying.But in sports pants size, it is always worrying.You can measure your waistline first when you buy, reflect your own situation to customer service staff, and then buy it. In this case, it is easier to buy suitable sports pants.

How to calculate the size of sports pants

Do not know how to calculate the size of the pants. Some of them are compared with pants bought in a physical store. For example: Which code should I choose with my pants size 27?This is wrong.Let me teach you how to measure the size of the pants to measure the size of the pants.

How to measure the side length of the pants: the length of the trouser side is measured from the waist to the naked length.

How to measure the waist circumference: The waist horizontal circumference of the waist level of the cord point (OM) is standard: the waist circumference = 1/2 of the height of 19 cm (such as the standard waist circumference of 160cm height = 160cm/2-19 = 61cm).

How to measure the hips: first put the soft ruler in the most bulging place of the hips, and then measure the hip around both ends in the most prominent direction of the abdomen.How to choose the right number type: For example, the number 155 is height. Customers can choose 64 according to their height. A represents the general layout.CM (26 -inch x2.54 cm = 66 cm) The market inch is changed -1 city inch = 3.3 cm (2 city inch x3.3 cm = 66 cm).

How to determine the size of your pants: No. 26 ----- Waistar circumference 1 foot 9-inch hip circumference 2 feet 6 27 ---- Waist circumference 2 feet 0 inch hips 2 feet 7 28 ---- waist circumference2 feet, 1-inch hip circumference 2 feet 8 29 ----- Waistar circumference 2 feet 2 inch hips 2 feet. Customers can also be measured according to a suitable pants.

Now let's study the characteristics of the waist.Most people's waist is the most important part is the waist circumference measured in the clothing, slowly becoming bigger until the hip joint.The ratio of this change is not the same.Some people have changed a lot, so in terms of clothing measurement, people with the same waist circumference are different from the perimeter of the hip joint.Furthermore, let's take a look at the style of the waistline design of the pants, with high waist pants, middle waist pants, low waist pants.Generally speaking, different styles of pants are slightly different in the design of the hip. The extreme contrast is tight -fitting jeans and horse pants. The hips of horse pants are larger than tight jeans.EssenceTherefore, you may not be able to buy and satisfied with the pants you bought in the physical store or wearing fit on the Internet.

So how can we buy fit pants online?The method is actually very simple.First of all, look at the length of the front crotch. Generally speaking, 30cm up and down the front crotch is high waist pants, 25cm up and down is the middle waist, and the low waist pants up and down.Take a soft ruler and measure the length of the front and rear crotch marked on the pants on your body, and then measure the waist circumference of this position. If the hips are right, then you wear this pants.In addition, it should be paid attention to whether it is in winter or summer.summer can be intact. In winter, we must wear the size of warm pants or wool pants.Do not exceed 2cm in the waist circumference. The hip error requires lower requirements. As long as the buttocks of the pants are greater than the measurement size of 3-5cm, it is impossible to wear when it is smaller. The exact size is tight pants.In order to reflect the style of wearing when designing, some pants may be a few centimeters larger in the waist, then you don't care about it, it is a need for design.

What should I do

1. Wash with soap, toothpaste or detergent. When cleaning, you need to pay attention. Wipe it gently with a soft wet cloth.

2. Apply soap or toothpaste, and use a soft brush with a soft brush with water.

3. When drying, the toes of the insoles are facing down, dried in the ventilation, and the white part of the shoe body is wrapped in toilet paper to avoid exposure.

4. Pay attention to daily maintenance. Do not wear it on rainy days. You can also wear less in mud roads. Suitable for shopping malls, roads, squares, floor sections.

5. Avoid stepping on sharp and fine stones, otherwise the materials on the soles of the feet will be tied out of small holes.

Which Adidas Boost series is better

1. Adidas Originals EQT Support 93/17

EQT is a classic shoe designed by Adidas in 1993.Today, Adidas has completely reshaped these shoes. The improved EQT is equipped with Adidas Primeknit upper, and incorporates a large thick BOOST midsole.The new improvement in retro styling has renewed this pair of EQT SUPPORT 93/17.The large -area midsole brings an unprecedented foot experience to EQT SUPPORT 93/17. Compared with running shoes like UB, EQT SUPPORT 93/17 is more suitable to become casual shoes for daily travel.

2. Adidas Inki Runner Boost

Adidas Iniki was designed in the 1970s and was one of the classic adidas shoes.Adidas Iniki is equipped with a large area of Boost midsole, which brings feedback, and basically kills mainstream UB, NMD and other styles.The only defect is that the breathability and wrapping are lacking. Inki upper is made of nylon, the toe and the heel are suede, and the inner lining is replaced by the elastic mesh.Without the blessing of the Primeknit upper, it is naturally impossible to compare with mainstream running shoes in terms of wrapping.

3. Adidas Ultra Boost4.0

As soon as UB is listed, it is under the name of the strongest running shoes. Indeed, having Boost's UB is indeed unique in the Running shoe industry.It should not be denied that UB is a good pair of sneakers. Whether it is daily travel or occasional exercise, UB is a good choice.

4,Yeezy Boost 350 V2

Yeezy Boost 350 V2 is also the coconut shoes in our mouths. The big sole is filled with Boost midsole, which provides a good foot feeling. With the perfect design, it can be said to be a great shoe.

5. Yeezy Boost 700

700 is also ugly shoes, daddy shoes.The retro appearance design and a thick feeling make this pair of shoes have the title of ugly shoes, but it is really handsome after getting on the feet.Of course, this shoe is also equipped with Boost midsole technology, and the foot feels very good.

Adidas shoe clothing recommendation & gt; & gt;

On September 23, 2021, the Danyang Science and Technology Talent Development Conference was officially held.The award is awarded by the Jiangsu Provincial People's Government, which aims to recognize advanced representatives who have achieved obvious effectiveness in leading scientific and technological innovation and development.Zhao Shuai, vice president of Yuyue Medical, attended and delivered a speech.

Huang Chunnian, Secretary of the Danyang Municipal Party Committee, attended the conference and emphasized: "Respecting talents and aspiring innovation has always been the core link of Danyang's high -quality development. Only the new and new rivers can be gathered in Danyang's innovation leadership, transformation and upgrading."

Yuyue Medical has made outstanding contributions to high -quality development with three major innovation measures.In May 2021, Yuyue Medical released a new company's strategic "Innovation and Rebirth Medical Device", listed "innovation" as the core strategy, representing the development trend of a new generation of Chinese national enterprises.

Zhao Shuai thanked the Danyang Municipal Party Committee and Municipal Government, and reported the work of Yue Yue's scientific and technological talents from the four aspects of "specialty, fine, special, and new".With an open mind and innovative model, we will focus on the construction of the Institute of Life Science and Technology Innovation and the public monitoring service platform of high -performance medical device, and explore the construction of Danyang (Nanjing) Life Science Innovation Center in the form of talents and innovation.Strive to leave excellent talents in Danyang and bring advanced products to the world.

The years are not living, and the season is like flowing.Innovation and talent have always been the focus of fishing development, and it is also the core driving force for enterprises to continue, fast and healthy development over the years.In the future, Yuyue Medical will further cultivate the medical field, focus on the major needs of the country and the masses, and further strengthen the accumulation of high -level talents and technologies worldwide with higher product quality, more pragmatic corporate responsibility, and stronger social responsibility.The road of Chinese science and technology power.

1. Can Ice knife shoes only slip on the ice?

Yes.

Ice knife shoes can only slip on the ice, the ice knife of the Ice knife shoes is very thin, and using the ice knife to contact the ice surface, there will be a layer of water film on the ice knife, thereby reducing the friction between the ice knife and the ground, so that people can on the ice surface on the ice surfaceSetting; if it is in other places or grounds, because there is no ice characteristics, you can't glide on youaring skates.

2. Can Ice knife shoes walk on the ground?

Ice knife shoes are generally used on skating rinks. Some friends have such questions. Is it okay to walk on the ground?The answer is negative.

Generally speaking, Ice knife shoes are designed for ice skating. They can only slip on ice. Wearing Ice knife shoes on the ground is not only difficult to walk, but it will easily damage the ice knife.If you walk on, you need to put on a protective cover to avoid damaging the ice knife.If you don't wear a protective cover, try to stomach to your toes with the tooth of the tooth, and don't use a fragile blade to the ground.

3. How to maintain Ice knife and shoes

Ice knife and shoes are important equipment for skating. You must pay attention to maintenance work, so as to better play performance and extend the service life.

1. Keep dry

The feet will sweat during skating, sweat in the ice shoes, and sweat acid will corrode the dermis inside the ice shoes, so try to keep the ice shoes dry in the inside of the ice shoes. After skating, immediately dry the inside and outside of the ice shoes with a rag or paper towel.Then place the ice shoes in a ventilated place so that the ice shoes can be completely dry.Do not put the ice shoes in an impervious locker or car trunk after skating.

2. Plim oil or care agent on ice shoes

If your ice shoes are leather, occasionally oil or leather care agent is used for ice shoes, but don't put too much.Too many nursing agents are easy to soft leather.

3. Use the net pocket ice shoe bag

Don't use closed ice shoes Bags, or your ice shoes can never be dried. Bags with ventilated Bags with a grid pocket can make ice shoes faster.

4. Blind shoes are covered with a protective cover when not in use

After the ice knife is covered with a protective cover, it can not only better protect the ice knife, but also prevent the ice knife from accidentally scratching yourself or others.

5. Keep ice shoes clean

Wipe the outside of your ice shoes regularly with a wet cloth. If you do not wipe the dirt, use a little gentle cleaner to add water.

6. Regular ice knife

The newly bought Ice knife shoes should be grinded with a blade. After a period of time, you should also grind the knife regularly. When you fall into the ice, the ice knife is not so comfortable, the ice knife should be grinded.record the skating time between the two grinding knives (calculated in hours).Soon you will find how long you can slip after each grinding knife, which helps you to avoid the embarrassment of the ice knife in the critical moment (such as the game or performance).Generally speaking, the average skating should be grinded once after 20 hours.

7. Pay attention to the braking method

The brakes are very often moved during skating. In order to protect the ice knife, the method of braking can be changed. You can make one -foot snow, T -shaped, or tango stopping.

8. Avoid rust of ice knife

The largest ice knife killer after the ice is much softer than steel. When a certain part of the ice knife is rusty, don't want to let it restore the original state, and the rusty parts can no longer press the blade.Therefore, try not to let the ice knife rust. Each time you get the ice, you must dry the ice knife. Before wearing a knife cover, wipe off the "snow" on both sides of the ice knife with two fingers, and then carefully wipe the knife's slot with your fingers.