Plating swimming mirror cleaning method

1. When there is oil on the surface of the swimming moster, choose a cleaning agent, choose neutral, clean it with your fingertips, then rinse with water, and then prevent it in a cool place.

2. When cleaning the goggles, be sure not to use organic solutions, such as alcohol, these organic solutions will cause corrosion of the lens, and the anti -fog effect of the Swimming goggles will be greatly reduced and even disappear.

How to wipe it clean

1. When wiping the swimming lens lens, do not use anything to wipe directly to avoid destroying the anti -fog film layer.When the anti -fog effect of the swimming moster is not very good, you can use the swimming mirror anti -fog agent appropriately.

2. If the gap on the edge is dirty, you can use a toothbrush to dip a little bath brush, but don't brush the lens to avoid scratching the lens.

How to save the electroplating goggles

1. After swimming, wash the swimming mirror with water, and then put it in the swimming mirror box.The advantage of this is to avoid some unexpected damage to the Swimming goggles.

2. Do not expose the Swimming goggles in the sun, or put it in high -temperature environments such as car trunk and radiator.Because the anti -fog agent of the swimmingoscopy will be damaged due to high temperature or ultraviolet rays, shortening the anti -fog life.

3. In a wet state, putting together with Swimsuits, towels and other objects for a long time will cause stains, so put in plastic Bags or small boxes after use.

What are the matters of electroplating goggles?

1. After swimming, wash the swimming mirror with water, and then put it in the swimming mirror box.The advantage of this is to avoid some unexpected damage to the Swimming goggles.

2. When cleaning the goggles, be sure not to use organic solutions, such as alcohol, these organic solutions will cause corrosion of the lens, and the anti -fog effect of the Swimming goggles will be greatly reduced or even disappear.

3. When wiping the swimming lens lens, do not use anything to wipe directly to avoid destroying the anti -fog film layer.When the anti -fog effect of the swimming moster is not very good, you can use the swimming mirror anti -fog agent appropriately.

4. It is best not to touch the lens with your fingers, so as not to leave your finger printing, or let the oil pollute the lens on your hand.Because the contact with the eyes in the swimming mirror is partially a closed space, wearing it for a long time can easily lead to hypoxia.Therefore, it is recommended to take the swimming lens for a while each time it is used to allow the eyes to replenish fresh air in time.

5. After using it for a period of time, there may be oily stains on the lens. At this time, it can be rinsed with neutral liquid detergent and water, and then dry and collects.

one, Tight underwearWhat is

In 1867, tight underwear in 1867 tight underwear Victorian tight underwear was a tight underwear style popular in the 1930s to the early 20th century.Unlike modern tight underwear, the Victorian tight underwear brings the "bee waist" effect, and it will also cause serious damage to health.This hourglass -type bondage underwear was first applied to the fashion industry around 1830. At that time, wide skirts, exaggerated sleeves and shoulders. These elements were matched with the waist to make the waist more slender.This underwear mainly acts in a small section of the waist, and does not restrict the fat around the ribs. In this way, the fat is squeezed to the upper and lower sides of the underwear, and the effect of thin waist can be described as immediate.Unlike modern tight underwear, the Victorian tight underwear brings the "bee waist" effect, and it will also cause serious damage to health.

With the evolution of fashion, ladies' clothing pursue a more Slim and slender effect. skirts and sleeves have continued to shrink. 18 century 80 In the age, princess clothes became popular.This kind of close -fitting clothes are not sutured horizontally on the waist, but suture along the whole piece of clothing.In this way, the bondage range of tight underwear expands to the waist to make the figure look slender.

Modern tight underwear is a invention of Fakir Musafar.The tight underwear currently produced is mostly used in this style, which is often used for postpartum waist functional recovery and other purposes.The shape of the underwear is no longer like the Hourglass as an hourglass.

two, What are the benefits of tight underwear

1. It looks slimming: Tight underwear has a good modification effect on the body, which can make women look Slim.

2. It can make the chest look full: tight underwear is not only squeezing the fat on the abdomen, but also squeezing the chest to make the chest look more sexy.

3. Although tight underwear can make us look very thin and sexy, it is a lot of harm. Tight underwear is a modern product of ancient breasts.Don't wear tight underwear, you really feel that if you are fat, you should lose weight.

3. Does wearing a tight underwear affect the chest?

1. Girls who are in the stage of puberty, do not wear tight underwear ,, Bid chests have a lot of harm to the development and health of girls.

2. When wearing tight underwear, the heart, lungs and large blood vessels are oppressed, which will affect the normal development of the organs of the body.

3, wear Tight underwearCan affect breathing function.Under normal circumstances, the coordination and coordination of chest breathing and abdominal respiratory breathing movements can be carried out to ensure the normal gas exchange of the human body, and the breasts affect the chest breathing, so that the chest can not be fully expanded. The lung tissue cannot be fully stretched.The decrease in quantity affects the supply of oxygen throughout the body.

4, wear Tight underwearCompress the breasts, make the blood circulation poorly, which will cause blood stasis of the lower part of the breast and cause pain, breast bloating and discomfort, and even cause nipples, breast dysplasia, affecting bodybuilding, and will cause breastfeeding in the future.

1. The assembly method of throwing the pole

1. The fish line passes through space Beans (space Beans are mainly controlled water depth, such as fishing for 1 meter deep, and move the location of space Beans to 1 meter).

2. The main line passes through the hollow lead pendant (the hollow lead pendant is mainly used for positioning, so as to avoid the electrons floating on the water surface).

3. The main thread passes through the floating wiring (the red side is in the fish line).

4. Put on the bean and knot (two laps when knotting).

5. Hang the fishing cage with the bait in the place where you knotted it.

Second, the correct method of throwing the pole

1. Side throw method

Side -tossing method is the most common way to throw hooks, which are generally used under wind.The trick is to pinch the lead or the sub -line on the left hand, place the hook bait on the side of the body, hold the pole with the right hand, the tip of the pole is slightly right in front, and the body as the axis.The arm rose naturally.Fly as much as possible with lead and hook bait to fly close to the water surface to ensure that it is accurate and lightly swinging in front of the fishing point.Either the person who is small and the side of the body and the side of the body has long directly affected the accuracy of the hook.

2. Swinging method

The way of swinging is a way to swing the hook bait into the fishing spots like swinging in the swing.In the absence of wind and wind, adopt this method of hooking more: The trick is to hold the pole first, higher than the shoulder on the same level, the pole tip is pointing at the fishing point, the left hand is wrong, the hook bait naturally hangs on fishing naturally in fishing.On the front of the person, then the right arm rises to the hook bait to the accurate fishing point.The hook bait and lead pendants are first entered into the water. The buoyant can then fall into the same point as the fishing pendant. Because there is less, the method of pulling the lines is simple, so this method has the characteristics of simple, convenient and practical.

3. Back shaking method

The back throwing method is usually adopted in the case of wind than humans. The trick is to first leisurely hook the bait to the back of the body. When pulling a certain position, throw it forward with the hills.When moving forward, the hook bait and lead pendants were forced to send them to the fishing point.This series of actions requires a sharpness, and it is done in one go.This method of hooking is usually not used, because the state of the bait should be hard or sticky when throwing.When encountering the wind of about 4,5, the other ways of throwing are not available, and this method must be adopted.

Third, how to use floating rods

1. Choose the right float

Floating is human eyes. The choice of floats is generally fishing for small fish, large drift fish fishing, small drift fish fishing in light water, and fishing fish with deep water.However, because there are many types of drift types and each drift type adaptive fish feelings are different, they need to be tested multiple times or through others to introduce them to a good choice.

2. Adjustment of float

Let's not hang the sub -line first, and then hang the weight of lead, the weight of the leading leather & gt; the float of the floats, so that all the floats are not into the water, and then gradually pull the float to the water surface.Let's adjust the height of the float.

3. Adjust your eyes

After throwing the float and pulling down into the water, then gradually cut the lead Skin until the required number of mesh is exposed. The basic setting method is: 7 mesh soft tail drift (4-5 fishing 2 meters), 7 mesh soft tail bait (Tune 3-4 fishing 2 meters), rubbing bait (7-9 mesh, fishing 2-3 mesh), hard tail tide bait (5-7 mesh, fishing 2-3 mesh.), SpecificThe situation must be determined according to the weather, seasons, feed and Fish hooks, and fine -tuning.

4. Find precision underwater

We move the floats after we hung the sub -line, adjust the distance between the float position and the positioning space bean position, and then hook the bait to hang the big bait group to find the bottom, so that the floats expose the water surface of the water.2 cm, if the float shows more than 3 items, it means that it is already over the bottom. The float is pulled down 2 cm, and then hangs the normally fishing bait ball to throw the pole into the water. The floats are fine -tuned until the fishing eye can be tried to fish at about 2 meters.

5. Try the fishing process to adjust float

If the bait has a mouthful, but you can't catch the fish, it means that the fish fishing is too spiritual, and the floats are 2cm.If the fish mouth is the upper or lower jaw, the fishing is too blunt, and the floating drift is 1 cm at each time.If there is no fish mouth for fishing, you should drop 15 cm at this time to find the water layer where the fish is located.

6. Choose the right time

When we have a strong sun during the day and the reflective water surface, we can choose a more appropriate time, such as: in cloudy days, or when the sun is weak or at night, etc., the appropriate time is conducive to fishing.

Is it useful to prevent UV service? What color is good?

The fabric taken by sunscreen is also an ordinary fabric. However, when dyeing the factory dyeing processing, it is necessary to use a assistant to improve the sun accuracy of the fabric, that is, the color fastness to prevent degeneration.

1. Meaning

The main role of sunscreen is to prevent the direct exposure of the sun's ultraviolet rays. The effect is the same as the Parasol, which makes the Skin from being darkened with the sun. This is a compulsory course for many beautiful ladies.Of course, Sun protection is not just for beautiful women.All outdoor activities should take care of themselves to pay attention to sunscreen.

The biggest feature of Outdoor sunscreen clothes is translucent, which is cool and sunscreen.Its principle is to add sunscreen auxiliary ultraviolet fabrics to the fabric. There are also some sunscreen fabrics that use ceramic micro powder and fiber to increase the reflection and scattering effects of clothes to prevent ultraviolet rays from damaging human Skin through fabrics.

2. Classification

Usually the "sunscreen clothing" sold by merchants is actually very effective for ultraviolet isolation, especially those products that are called lightness, most of them are clothes sunscreen and not anti -Skin.

Sun protection clothing is generally three types: one is colorful cotton fabric clothes. Blue, red, blue, and green are the largest isolation rates of ultraviolet rays.The second is sunscreen fabric. This kind of production principle is very simple. In fact, the sunscreen auxiliary agent is added to the fabric.Some.The third is special fabric clothes.

Three, principles

Sun protection clothing began to popularize in the United States in 2007, and then entered China.In China, most of the UV fabrics are mostly used in outdoor products, and there are relatively few applications in ordinary clothing.

On January 1, 2011, my country launched the latest assessment standard "Evaluation of Textiles Anti -UV performance".This stipulates that only when the UPF of the product is greater than 30 and the UVA transition rate is less than 5%, it can be called "anti -ultraviolet product"; ultraviolet products should be marked with the following three aspects on the label: 1. This.Standard numbers, that is, GB/T18830; 2.UPF value: 30 or 50; 3. Long -term use and in the case of stretching or humidity, the protection performance provided by the product may be reduced.In this evaluation criteria: UVA refers to the part of the part that harms the human body in ultraviolet rays, and UPF refers to the degree of transmission of ultraviolet rays. The larger the value, the lower the transmission level.

Fourth, parameters

It is not difficult to find that many sportswear brands have anti -ultraviolet clothing products when visiting the shopping mall clothing counter. The signs of these clothing clearly indicate related parameters such as clothing materials and UPF indexes.There are so -called sunscreen clothing in a small number of fashion brands, but most of them have not found related signs.

In the past two years, some merchants have applied the concept of Sun protection to ordinary clothing. Because the public knows very little about sunscreen fabrics, there are inevitably some situations that are false by falseness.Therefore, people should not be blindly attracted by various fancy propaganda when buying sunscreen clothing.The clothing made of regular sunscreen fabrics will marked clear sunscreen parameters on their clothes signs. If not, it is recommended that you do not buy it.In addition, long -term washing or stretching can cause the sunscreen performance of clothes. At this time, you need to replace or re -add a additive to the clothing. The specific practice refers to the relevant instructions of the product.

Five, color

Everyone will wear light -colored clothes in summer. In fact, in summer, wearing red -colored clothes is the most Sun protection!And red is so good for health, so everyone should wear red color!But there is another point. If you are wearing a red cotton T -shirt to climb and play, it is not a good choice, because the cotton clothes are not easy to dry, and the wet fabrics affect sunscreen very much.Add a bit of chemical fiber fabric will be better in this point.

Wearing red presence is good for health.Each of the ozone in the atmosphere is reduced by 1%, and the ultraviolet rays that are irradiated to the ground increase by 2%, while the incidence of Skin cancer increases by about 4%.Wearing red clothes and skirts in the sun can reduce the damage to the Skin by ultraviolet rays. This is because ultraviolet rays are the shortest wavelengths of the wavelength of the red light in the sun.Living, so wearing red clothes can absorb and filter more sun ultraviolet rays, which can reduce the damage to the Skin by ultraviolet rays.In summer, we wore some professional sunscreen in the outdoor activities.Among them, professional production of sunscreen clothing has the longest wavelength, which can absorb a large amount of ultraviolet rays in the sun, which can effectively prevent sunburn, while other non -sunscreen clothes cannot prevent ultraviolet rays from preventing ultraviolet rays.

Six, importance

When it comes to sunscreen, many people think that the patent of Ms. Beauty always loves beauty. In fact, Sun protection is very important for everyone.A latest study pointed out that people who have been exposed to long -term exposure in the sun when they are young are prone to eye diseases that may lead to blindness when they are old.However, wearing Sunglasses or hats can reduce the degree of damage.Many people spend their remaining time except for indooring.The inevitable Outdoor is the exposure of ultraviolet rays.Remind everyone to do sunscreen.Sun protection clothing is a necessary weapon for sunscreen.

In summer, many people who are outdoors are biased towards the light color series such as white in their daily clothing. The texture is mostly cotton, which is breathable and cool.However, some experts believe that red clothes are the most sunscreen, and readers can be used as a reference.

Seven, select

1. How to choose sunscreen

Although they are all called sunscreen, most brands of sunscreen clothes are just spoken by salespersons. Only some Outdoor brands are marked with "sunscreen", "UPF40", "UPF30" and other words.There are descriptions such as "UV blocking, which can effectively absorb UVA and UVB".Different from the different sunscreens sold in the market, the fabrics of Outdoor brand sunscreens are almost 100%nylon, with transparent styles and soft texture.

2. UV prevention and sunscreen index are important

It is understood that sunscreen clothes are special clothes for Outdoor travel.The reporter visited several outdoor products stores in several shopping malls. The sales staff in the store showed the reporter a top and trousers, which were sold at about 600 yuan.sales staff said that these two clothes are specifically used for sunscreen. When you go out for walking and long -term outdoor activities (fishing), you can wear this sunscreen.

The top of this dress and the fabric of the pants feels thin and soft.It is reported that the main performance of this clothes is the breathability of the material, and the material of the top is 100%polyester fiber, and the material of the pants is 100%nylon.The label is specially identified by UV prevention and has a Sun protection index logo.

3. recognize the standard label, do not "confuse audiovisual"

Are these sunscreens really or commercial hype?The quality inspection department stated that ultraviolet products should be marked with the following three aspects on the label: the number of this standard, that is, GB/T18830; UPF value: 30 or 50; UVA pass rate: less than 5%; long -term use andIn the case of stretching or humidity, the product provided by the product.

4. According to industry insiders

In terms of color, the darker the color, the higher the protection performance of its ultraviolet rays.In terms of texture, in chemical fibers, polyester sunscreen effects are the best, followed by nylon. The Sun protection effect of artificial cotton and silk is worse than that, while the effect of linen in natural fibers is the best.

However, for people who need long -term outdoor activities or have special requirements for sunscreen due to Skin problems, ordinary clothes cannot meet the needs of their sunscreen, and they need to wear special sunscreen clothes.Therefore, when buying, you must see the Sun protection coefficient marking of clothes. The higher the price, the better the Sun protection effect.

5. Black T -shirts are the most Sun protection but the hottest

In summer, people wearing clothes generally like to choose lighter colors. Black can be described as people's "taboos".However, when it comes to sunscreen, black T -shirts are slightly better than white T -shirts.

During the experiment, the staff also found a black all -cotton T -shirt with the thickness of the white T -shirt.It was found that the long -wave ultraviolet of the black T -shirt was only 4%.

According to optical experts, the darker the color of the clothes, the stronger the absorption of light.Light to white clothes, part of them are reflected and part of them will transmit it. Therefore, wearing white clothes will feel cool, but ultraviolet rays may transmit it on the Skin.When wearing black clothes, the light is basically absorbed. Although the effect of blocking ultraviolet rays is better, the price will feel hotter.This can only be said that everything is beneficial and disadvantaged.

[folding sofa bed] How to open the folding sofa bed for the common types of folding sofa beds

How to open the folding sofa bed

At present, there are many brands of folding sofa beds in the market, rich in styles, and a large number of choices, but it is inseparable, and its folding and opening methods are not much different.Generally, as long as the ordinary folding sofa bed is standing behind the sofa bed, the back is pressed like a cushion, and the inner spring will be automatically started.In the case of small room or insufficient guest beds, it is urgent to solve the eyebrows.

Some folding sofa bed springs can be dragged out of the back of the sofa, separated from the seat cushion, and spread the cushion on it to form a double bed.Not only is it suitable for sitting, it can also be opened as a bed. This is not only saving space, but also very convenient to use. It saves time and effort when handling.There are also folding sofa beds. The back and seat surface are connected with a locking mechanism. When the locking mechanism is opened, the back can be placed and parallel to the seat surface, forming a double bed.

Types of folding sofa beds

1. Fold the sofa bed in the back cushion, the back cushion can be folded over.This type of sofa bed is more convenient. It is very simple to design and looks more like a solid wood Leisure chair or European fabric seat.Such a sofa bed changes from the sofa form to the shape of the bed, as long as the switch on the back of the bracket is turned on, and then puts down the back into a straight line, and it can be folded over the sofa cushion. It is very convenient.The state of the bed to the sofa state is to turn the cushion in the cushion, support the back to a suitable angle, and fix the back bracket.

2. The cushion draws the launch sofa bed. The design of the launch sofa bed is more delicate. When you do nt need it, you can hide the bed under the cushion of the sofa.And more stable.When you want to turn the sofa bed from the sofa to a soft folding bed state, you can pull out the other half hidden underneath and stitch it into a plane (generally a sound of "jumping" indicates that it is okay), adjust the back of the backFor a suitable angle.If you want to turn it from the bed state into a sofa state, the first thing to do is press the switch at the combination of the two (that is, a place where a "jump" sounds), and then push it to the sofa cushion underground to hide the ground underground.Just get up.

3. Comprehensive foldable sofa beds, comprehensive foldable sofa beds can be adjusted whether they are cushions or back.This kind of sofa bed can be a good indoor space. The bedding design is also carried out under the cushion to store the sofa pillow.The armrests on both sides of the sofa bed can also be put down, which effectively increases the area of the sofa bed.