Hanlan's breeding method and precautions

1. Soil

Hanlan is suitable for growing in soil with loose and breathable and well -drained. When planting, it can use 40%of river sand, 35%of black humus soil, 15%of the wood chips, and 10%of fern roots mixed with soil.Cultivate the diarrhea and disinfection to avoid cold orchid infection with diseases and insect pests.

2. Light

Han Lan likes to grow in a half -yin environment and is not tolerant.Therefore, when maintenance, pay attention to lighting, usually placed in the semi -yin, and the weak astigmatism can meet the demand for light.If the light is too strong, the plants are prone to sunburn, which will affect flowering.Usually it is placed in the astigmatism in spring and autumn.

3. Temperature

Hanlan's high temperature resistance and cold resistance are not strong, and they are more sensitive to temperature.I like to grow at a temperature environment between 18 degrees and 28 degrees.In summer, temperature should be controlled at high temperature, spray water, and ventilates, so that the temperature is below 30 degrees.Move to the room at low temperature in winter, and the temperature control is above 10 degrees to avoid frostbite.

4. Watering

Han Lan likes the environment with high humidity. During the maintenance period, watering, spraying water, and maintaining a certain humidity should be maintained.Especially in summer high temperature, when the climate is dry.However, it should be noted that the amount of watering should not be too much. There must be no stagnant water in the soil, otherwise the root system will be easily rotten.Especially in winter, water control must be controlled in low temperature environments.

5. Fertilization

Han Lan has less Fertilizer, and only needs to apply diluted liquid Fertilizer every ten days in the peak growth season.You can also use leaf spray to add leaf surface Fertilizer to Hanlan, which can make the leaves of orchids more green and strong, and prevent root Fertilizer.

6, humidity

Han Lan likes the growth environment with a slightly dry pot soil and a large air humidity.Therefore, it is planned to plant 55%-75%during the day, and the relative humidity of not less than 80%at night can be used. It can be used with humidifiers, automatic spraying, Hanging water curtains, sprinkler on the ground, and moisturizing pools or water basins.The humidity of the air should be maintained between 65%and 85%, and the air humidity during dormant during winter should be 50%-60%.

7. Pests and insect prevention

(1) anthracnose

Timely cutting the disease in time and burning the diseased body.

The method of improving watering is to inject the water from the edge of the Flower pot.

Spray 50%of the 500-600 times liquid at the beginning of the onset, while strengthening ventilation and light transmission to avoid leaf surface spraying.

(2) Leaf blight

Remove the diseased leaves and the diseased body concentrated and burned.

Pay attention to ventilation and light transmission to prevent excessive watering, and avoid spraying plants directly.

Use 50%todtin 600-800 times liquid to spray.Once every 10 days, it can be sprayed 3-4 times in a row.

(3) White silk disease

Timely remove the diseased leaves, diseased plants, and disease points in time, which can be disinfected by lime; 1000 times the water removal agent of 30%soil seedlings is drenched with a 30%soil seedlings.

1: 500 times perbal -clearing the leaves and roots at the beginning of the onset.

(4) Sicatinworm

When a small amount occurs, it can be removed with a soft brush and then cleaned with water.

For more than a long time, it can be sprayed with 40%of the rapid emulsion 1000 times solution during the incubation period.The positive and back of the leaves should be sprayed on the back of the medicine for 3-4 times in a row. Each interval is 5-7 days, it is basically extinct.

(5) Red Spider

The quantity is small, and you can use a brush or a small brush to remove.

Most of the 40%trichlotate is killed by 1000 times liquid.

The soil method is lit with a plate of mosquito coils, placed in the basin of the diseased plant, and puts it in a pot with a plastic bag. After 1 hour of smoke, it is killed, regardless of eggs or adults, and does not affect the plant.

1. The difference between water drops and spinning wheels

1,Different volume and weight

Drop wheels are usually lighter than spinning wheels, smaller volume, easy to control, and more suitable for long -term fishing activities.

2. Different Fishing rods

The spinning wheel is equipped with a straight handle, and the fishing wheel is below the pole.

The water drop wheel is equipped with a handle pole, the fishing wheel is above the pole, and the ring thepex diameter is small.

3. Different qualifying methods

When the spinning wheel was thrown out, the line cup was still moving, and the fishing line flew out.

Advantages: not easy to fry the line, easy to get on, friendly to novices.

Disadvantages: The spiral line will make the fishing line a torque and affect the swimming posture of the bait. After multiple throws, it may cause the fishing line to scroll on the next throw.

When the water drops are thrown out, the line cup is trapped by the fishing line, and the percussion speed can be perfectly thrown when the line cup speed can be thrown.When the speed is greater than the speed of the line cup, the distance will be lost.When the speed is less than the speed of the line cup, it will lead to frying lines.

Advantages: When you throw your throwing, you can go straight out of the line, and there is no torque on the fishing line.

Disadvantages: Different weight Baits need to accurately adjust the main axis knob and brake size, otherwise it is easy to fry the line to test the experience of the fisherman and not suitable for novices.

4. Different lines of collection

When the spinning wheel is closed, the wire cup does not rotate. Through the rotation of the line regulations and the upper and lower movement of the line cup, the fishing line is evenly wrapped around the online cup.The friction between the line and the line regulations will cause the fishing line loss. After long -term use, pay attention to the degree of wear of the fishing line, replace it in time, and avoid Running a gun or disconnected to run the fish.

When the water drops are closed, the line cup rotates, and the line regulations move around the online cup evenly.Almost not worn the fishing line.

5. Different unloading power

The unloading force of the spinning wheel regulates the top of the online cup.The water drop wheel removal force is adjusted on the inside of the handlebar, which is more convenient.

6. Different handles

The spinning wheel handle can be swapped around, and the water drops cannot be.

7. Different prices

The price of spinning wheels is relatively cheap, and the spinning wheel is preferred when the budget is insufficient.

8. Different throwing accuracy

When throwing, the water droplet can touch the line cup through the thumb to brake the flying distance to control the fake bait, so the drop of throwing is better.At the same time, the handle rods with water drops wheels are smaller and higher.

9. Different strength

The strength of the water drop wheel is higher than that of the spinning wheel, so it is recommended to use a drop wheel when using a large -scale fake bait.However, the drip wheel may need to replace the wire cup with different weight bait.

10. Different efficiency

Under the premise of non -frying lines, the water Drop wheels are more efficient than the spinning wheel, because the ticks of the drop wheel and the throwing investment are faster.

Buying guide: For novices, the spinning wheels are recommended first, fast, cheap, and simple operation, which allows you to easily experience the fun of Luya fishing.It is not too late to choose a water drop wheel when you want to advance.

Can I share a pole of water drops and spinning wheels?

Drop wheels and spinning wheels cannot be shared by a pole.This is because the design and size of the water droplet wheel and the spinning wheels are different. The water Drop wheels are the handle pole, the spinning wheel is a straight handle pole, and the position of the rods is different. The center of gravity is different. Therefore, it cannot be universal.

Textile wheels are usually used for lighter fishing groups or thin line fishing, while water drops are more suitable for heavy fishing groups or coarse line fishing.The spinning wheel is a common Luya wheel. It is used in large quantities of fishing enthusiasts in sea fishing and Luya fishing campaign, as well as fishing enthusiasts when fishing such as lakes and pools.

In order to ensure the smoothness and safety of fishing, it is recommended to choose the corresponding pole according to the selected wheel type.If you need to replace the wheels, you need to choose the corresponding models and brands to ensure the stability and safety of the installation.

1. How about Yun Tianhua Chemical Fertilizer

Yun Tianhua Chemical Fertilizer is an excellent Fertilizer that can provide sufficient nutrients for crops and improve crop yield and quality. It mainly has the following advantages:

1. Raw material advantages

Yun Tianhua Chemical Fertilizer is produced by high -quality raw materials produced by Yun Tianhua. It has high nutrient content and strong permeability, and can provide sufficient nutrients for crops.Yunnan Yuntianhua Co., Ltd. is a powerful state -owned controlling enterprise, which has the highest ammonia capacity and Urea production capacity at the forefront of the world. Yun Tianhua has a large domestic and highly active phosphate resources, high water -soluble phosphorus content, good solubility in phosphorus phosphorus, good solubility in phosphorus, High utilization.

2. Management advantage

As a subsidiary of Yuntianhua Group, Yun Tianhua's Chemical Fertilizer has inherited the improvement of Yun Tianhua's continuous improvement of production management experience in decades, which can better ensure the quality and efficiency of the product.

3. Technical advantage

Yuntianhua Tianteng Compound fertilizer uses the internationally leading high -pagoda composite production equipment and technologies. The product formula is complete, the nutrients are uniform, the Fertilizer effect is lasting, the soil measurement formula is strong.

2. How to identify the authenticity of Yun Tianhua Chemical Fertilizer

1. View packaging: The packaging of Yuntianhua chemical Fertilizers should have a formal and clear logo, including the manufacturer's name, product name, production date, batch number, validity period and other information.

2. View product quality:Check the appearance of Yun Tianye Fertilizer. The texture of the true and false Yun Tianye Fertilizers is different. The texture of the fake goods is rough and there are large pieces of granules.

3. Check the certificate:When buying Yuntian Chemical Fertilizer, you can ask the merchant to provide the quality inspection certificate of Yun Tianye Fertilizer, and check whether the certificate is regular. The authenticity can be verified to the relevant departments.

4. Investigate market price:Compared with market prices, if the price is too low, consider whether it is fake.

Large officePotted plantWhat are the

Large green plants are commonly used in the office include large green dill, fortune tree, money tree, Brazilian wood, rich bamboo, duck palm wood, loose tail sunflower, piano leaf banyan, Hupilan, Ping An tree, rich coconut, palm, etc.Introduce the habits and characteristics of large green plants in these offices.

1. Big leaves green

There are many varieties of green dill.You can put a pillar in the center of the pot soil and wrap a thick layer of felt, and the green dill will be entangled on it.If you want to develop a green pillar, replace the felt with palm Skin, keep the room temperature above 20 C, pour water per month, and clean the leaves once in half a month to maintain a good state.

2. Fortune tree

It is also one of the plants commonly used indoors,It is usually suitable for the front desk and the leadership office.10Watering, you can pour about 7 days in summer. Remember not to be large. After 3 months, it is recommended to apply fertilization every half a month. The liquid nutrient solution is effective.

The height of the commonly used fortune trees is about 1.7-1.8 meters. You should pay attention to selecting a wealth tree to choose a straw pen. The diameter of the tree pole is more than 10 cm. The more branches on the tree rodCoordinate beauty and long life.

3. Money tree

Money tree is a very drought -resistant desert tropical plant. It is completely fine without watering a month, and it can adapt to a relatively dry environment in the room.I won't see any changes.maintenance pays attention to maintaining an environment of more than 10 degrees. Pay attention to the potting soil to keep it slightly dry. After drying, water can be watered. The leaves need to be cleaned once a month or two to avoid accumulating too much dust.

4. Brazilian wood

Plants that are very easy to take care of, do not like direct sunlight, the light scattered light is the best, wet watering, water is easy to water, and it must be fertilized regularly after 3 months. Otherwise, the leaves will lose their gloss.Volume, it is difficult to recover in the later period.It is usually suitable for the corners of the small conference room or office area.

5. Fugui bamboo

Fugui bamboo is a kind of shade -resistant plant. When breeding rich bamboo in the office, it needs to be replaced once a week. You can use a nutrient -rich mineral water, or use tap water for a period of time.When changing the rich bamboo, you need to use scissors to properly trim the growing branches of rich bamboo, so that the rich bamboo can grow healthily.

6. Duck palm wood

Large green plants in the office are duck palm wood. When breeding duck palm wood, it needs to be placed in a ventilated semi -yin environment, and provides scattered light to duck palm wood to make the leaves of the plant more green.And use sharp scissors to cut off the poor growth of duck palm wood to make it more beautiful.

7. San Tail Aoi

The leaf shape of Sanwei Aoi is a relatively good leaf -viewing plant. It is suitable for breeding in the office. When breeding loose -tailed sunflowers, it needs to be watered every other week to keep the soil moist.Watering frequency, water can be poured every other month to maintain the healthy growth of scattered tail sunflowers.

8. Qin Ye Rong

The leaves of Qinye Rong are wide and green, and have high ornamental value. When breeding piano leaf banyan in the office, the windows need to be opened every morning and evening to make the indoor air circulation, avoid poor growth of piano leaves, and when the weather is too hot, it must be too hot.Spray water to the leaf ficus to keep the plant humidity.

9. Tigerpi

Tiger Pilan with a tall pottery pot, the ornamental is also good. It was originally a long -leaf Phnom Penh Tiger Pilan. With the tall pot, it instantly turned into a large green plant.Drought resistance, yin and barren, usually do not need to take care of it. Potted plants like such a large pottery are places where there is no light in the room. The temperature is above 5 degrees, basically watering once every 1 to 2 months.

10. Ping An Tree

The Ping An Tree means that the family is happy, everything is good, and the leaves are shiny. The office often turns on the Lights, so that the leaves of the Ping An tree look very beautiful under the light.Ping An Tree is happy, resistant to semi -yin, avoid strong sun exposure in summer, and it is necessary to cover it properly.Wet wet, watery sees dry and wet, not resistant to drought and water.Hi warmth, the growth temperature is 15-28 C, and the wintering of winter is not less than 5 C.

11. Rich coconut

Rich coconut is also a tropical plant that is suitable for raising in the office. Pay attention to spraying more during breeding to maintain humid air.Watering less in winter, wealthy coconuts are not resistant to cold and are suitable for placing indoors. In winter, pay attention to heat preservation.

12. Palm

Palm trees are very common large potted plants that are suitable for placing in the office and suitable for growing in a relatively small light environment in the office.

What are the materials for preparing Nutritional soil

What raw materials are made of Nutritional soil?Materials for preparing Nutritional soil can be divided into two categories. One is an organic soil, including corrupt leaf soil, carbon soil, Fertilizer soil, sawdust, etc.;Earth, sand, furnace slag, etc.The most convenient material for Nutritional soil can be selected when preparing.

1. Rotten leaf soil

Rotten leaf soil is also known as humus soil, which is composed of fallen leaves, grass, etc., and has high humus content, strong water retention, and good permeability. It is one of the main materials for preparing the culture soil.The pH value of rotten soil is acidic.Use after exposure to sieve.

2. Mountain mud

Mountain mud is divided into two types of Huangshan Mud and Black Mountain Mud. It is made of long -term accumulation of deciduous trees in the mountains. It is a natural humus -containing soil and loose soil.Black Mountain Mud is acidic and contains more humus; Yellow Mountain Mud is also acidic and has less humus.The Huangshan Mud is more sticky than the black mountain mud, and it contains less humus.

3. Garden soil

Garden soil is also known as vegetable garden soil and pastoral soil. It is taken from the surface of the surface of the vegetable garden, orchard, which contains a certain humus and has a good physical characteristics. It is often used as the basic material of most cultivation soil.This is an ordinary cultivation soil. Due to frequent fertilization and cultivation, high Fertilizer, high Fertilizer, and good structure structure, it is one of the main raw materials for preparing the cultivation soil.The disadvantage is that the surface layer is easy to cut, and the ventilation is poor when wet. It cannot be used alone.The surface sandy loam of vegetables or Beans has been planted.

4. Ceic

Ceramous is the residual body after coal burning. It has strong breathable drainage capacity and no diseased insect residues. The main ingredients are silicon and aluminum oxides. They are characterized by porous substances. They have loose structures, larger than the surface area, and have certain adsorption capacity.When the potted matrix, it should be shattered, with a granular material of 2 to 5 mm and mixed with other culture soil.Before using, be soaked in water for about a day. The purpose is to soak the salt in the cornography, otherwise it will easily cause soil saline and alkaliization.In order to reduce sulfur dioxide pollution, some coal adds a small amount of lime. Such cumberscus contains calcium sulfate, which should be soaked longer and more frequently.

5. Hezha

River and sand drainage and breathability are good, and are mostly used to mix other culture materials to facilitate drainage.Incorporating a viscous soil can improve the physical structure of the soil and increase soil drainage ventilation.The river and sand are not fat.It can be used as a material for the cultivation soil, or it can also be used as cuttings or sowing matrix alone.When sea sand is used as a cultivation soil, it must be washed with fresh water, otherwise the amount of salt is too high, which will affect the growth of flowers.

6. Bone powder

Bone powder is a Fertilizer powder made of animal miscellaneous bones and fermented, which contains a large amount of phosphate Fertilizer.The amount of each addition must not exceed 1 % of the total.

7. charcoal

Carbon is made of trees. It has a porous structure, no nutrition, and has a strong bacteriostatic and adsorption of harmful substances.

8. Rotten bark

Rotten bark is a substrate produced by the dry bark on the surface of the tree. It is a good Berlan matrix and should not be used as a good form of art.

9. coconut bran

coconut bran is also called coconut soil, coconut brick, coconut powder brick, coconut bran brick, which actually refers to the processed coconut bran, which is processed from the coconut shell, which is a pure natural organic matter medium.coconut bran after processing is very suitable for cultivating plants, and it is currently more popular Gardening matrix materials.coconut bran pH value: 5.5--6.5, the pH value is low, and microorganisms are not easy to breed, which is conducive to plant cultivation.Non -toxic and odor, sterile and environmentally friendly, soft texture, can be loose soil, good breathability, mixed with other matrix, can prevent soil plate knots.coconut bran is mostly used as planting matrix, which does not contain nutrients itself, and cannot provide nutrients required for plant growth. Fertilizers must be added according to the situation during use.

10, egg shell

After the eggs are taken out of the egg yolk, rinse, smashing can be used as the substrate to cultivate succulents. It is breathable and moisture -proof.

11. Saw, rice shell

Loose and ventilation, good water reservation, water permeability, strong insulation, light weight and clean and hygienic.The pH value is neutral and slightly acidic.The plants cannot be fixed when used alone. Therefore, it is more mixed with other materials to increase the drainage and breathability of the cultivation soil.Pole porous, good breathability, increase the supply of root oxygen.Promote plant absorption, improve acid soil, and reduce fat loss.

12. Matsushita

Under the deciduous pine trees, there is a layer of fallen leaves in autumn and winter. The leaves of the deciduous pine are small, light, soft, and easy to shatter. This kind of leaves can be used as materials for the cultivation soil after a period of time.Falconium pine can also be used as a cultivation soil material for preparing acidic, slightly acidic, and increasing loose and transparency.

13, pottery grains

It is a grain particle, which is generally used for the bottom or paving.The colors of roasted pottery grains are mostly dark red and ravioli. There are also some special varieties of gray yellow, gray -black, gray -white, cyan -gray, etc., and the surface looks Smooth.Select the conventional dark red at the bottom. If you pave the surface, you can choose your favorite color.ceramics are used to act as a hydroponic container.

14, peat moss/water moss

Water moss is widely used in the cultivation of various orchids, and is one of the superior materials for planting and cultivation matrix.It is used to plant flowers, which is clean and hygienic, but also reduces the occurrence of pests and insect pests, making seedlings grow strong.Mixed with peat and perlite to improve the breathability and moisturizing performance of the matrix.Local use can be put on the upper part of the matrix, or on the bottom of the basin to prevent the thin particle matrix loss, improve the moisturizing performance of the matrix, and enhance the breathability of the basin floor.It is conducive to the growth of plant root system and does not cause rotten roots.Water moss belongs to the plants, which are rich in organic matter and various nutrients such as nitrogen, phosphorus, potassium, calcium, magnesium, sulfur, iron, etc., and are used as a cultivation substrate to save fertilization.Potting noodles of various flowers with water moss can also beautify the effect.

15. Plane

Plane is an acidic lava with volcanic eruption. The glass rocks made of sharp cooling are named after the pearl cracking structure.The acidity of perlite is relatively high. It is used for soil transformation and regulates soil plate knots.Pay attention to the use of perlite to prepare Nutritional soil. You need to mix and match the perlite with other soils, and you should not overdose when mixed with other soils. You can mix the perlite at a ratio of 4: 1.