How about Ruibu basketball shoes

Reebok is a fitness brand from the United States and is committed to becoming a first -class fitness brand in the minds of fitness enthusiasts.Combined with the PUMP technology that has been developed in the early stage, Ruobu has developed many basketball shoes that combine high -tech, comfort and security.

In terms of technology, the shock absorption of Ruibu basketball shoes does not have a strong foot feeling as Nike's various air cushions, but it is calm.In addition, its honeycomb shock absorption technology is actually an air cushion essentially another form.We can refer to the re -engraving of some old shoes released by the Ruobu in recent years. Its foot feel is still better, such as Pump Omni Lite, etc. This is all products in the 1990s, which is enough to see shock absorption aspects of shock absorption.Ruibu still has deep skills.

1. Frequently Asked questions in Ski pants answers

1. What should I do if the Ski pants are too long

Don't cut the Ski pants too long, because you need to wear a special snow boots during skiing. It is very large. The pants can be put directly on it. Not only will it not hinder the matter, but it will also be warmer.If it feels inconvenient to wear, just roll it up.

2. Do you want to wear a base in the Ski pants?

It must be added with warm pants inside. Let's not say that the Outdoor temperature is very low, that is, when you are taking a cable car, if you wear less, you are very frozen butt, but the feeling is uncomfortable.

3. Is it necessary to wear a loose point

Yes, the tighter you wear, the worse the warmth.

4. Do you have to wear two pants when you look at ice sculpture?

Under normal circumstances, when looking at ice sculptures, you need to wear warm pants and pants. If you are more afraid of cold, you can wear three pants.

2. How to choose double -board Ski pants

During skiing, a reasonable structure of Ski pants can not only provide protection, but also provide convenience for wearers.Ski -trousers are equipped with windshields inside the legs. Anti -slip rubber root can better fit the upper. In the case of a small amount of snow, it can prevent snow from being filled into the shoe.The purchase of double -board Ski pants should be considered as considered the following factors:

1. Inner pants should have anti -cutting coating patch or dedicated to prevent the cutting of the blade from being separated and protecting the pad.

2. Good end lining, antibacterial deodorization.

3. You need to prepare at least one cotton and pants according to the climate.

4. Frequent snow trails, you can consider the middle waist Slim style, four -way elastic fabric, and the waterproof and breathable index is better.

5. Those who often play outside the Tao can consider wear-resistant GORE-TEX fabrics, focusing on windproof and warmth.

6. For those who often play powder, you need to consider high waist snow skirts, or high -waist back pants to prevent snow.

3. precautions for buying Ski pants

1. Don't just look at the fabric simply, but also cooperate with the lining, cutting the craftsmanship and ergonomic design to play the role of the fabric.

2. Core-TEX has many Levels, but the highest level fabric is not necessarily suitable for all scenes.

3. The details will determine the comfort, such as the adjustment method of the Belt, the position of the breathable zipper, and the location of the pocket. You must choose different designs according to different scenes.

4. The day of skiing is likely to include some small collisions such as falling, wrestling, and finding Ski pants with additional filling and internal protection.Protection and filling can not only reduce damage to your body, they will also reduce the chance of tearing your pants and loss of waterproof ability.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. What should I do if the fabric of the skiper is dyed

1. salt water soaking method

Salt water has a strong solid color, so salt water can be used to deal with dyeing problems.The specific operation steps are as follows:

(1) Prepare a pot of warm water and add an appropriate amount of salt, which is about 30 grams of salt added to each liter of water.

(2) Soak the dyeing area and soak in salt water. The time is generally 1 to 2 hours.

(3) Rinse with water after removing, you can add a small amount of salt to the final fixing treatment again.

2. Washing method of bleaching agent

Sometimes the stains and heterosexual dyes on the Ski clothing fabric are stubborn, and bleach can be used for cleaning.The operation steps are as follows:

(1) Mix the bleach and water according to the proportion of indications.

(2) Soak the staining area in the mixed fluid, the time is generally 10 to 20 minutes.

(3) Rinse with water after removing, repeatedly repeatedly until there is no odor.

3. Special dyeing agent treatment

If the above method cannot effectively handle the problem of dyeing, you can try to use a special chroma for treatment.The operation steps are as follows:

(1) Select the dyeing agent suitable for fabric materials.

(2) Mix the dyeing agent with water according to the instructions of use, and stir well in proportion.

(3) Soak the dyeing area in the mixture, the time depends on the situation, and the adjustment can be made as needed.

(4) Rinse it with water after removing it to avoid residual dyeing agent.

It should be noted that different fabrics and dyeing reasons need to be treated with different treatment methods.If you are not sure about the specific situation, it is best to consult the opinions of professionals to avoid incorrectly damaging clothing.

2. How to clean the skiing clothing fabric

1. Follow the cleaning instructions

Ski clothing fabrics are usually brought with cleaning instructions, which are formulated based on specific fabrics and technology.Read and follow these descriptions to ensure the correctness of cleaning.

2. Do not use laundry powder

If you can't find a cleaning instructions, you can refer to the following suggestions: cleaning with a small amount of neutral laundry solution to avoid using laundry powder, or any products containing bleach, decontamination agent, and softener component.Because the chemical components in these detergents may damage the waterproof performance of the skiwear, and it may also damage the color and texture of the fabric.

3. It is recommended to use a professional skiper cleaning agent

In order to ensure that it does not damage the waterproof coating and fabrics, it is recommended to use a cleaning agent for skiing clothes.These cleaning agents are usually mild and effective, can remove dirt and protect waterproof performance.

4. Avoid strong mechanical cleaning

(1) Hand washing: If the Ski clothing is only cleaned in small areas, it is recommended to use a soft brush or sponge. Wipe it gently with the cleaner, and wash it with your hands, but do not rub and wire.

(2) Machine washing: It is also possible to wash it in the washing machine, but to avoid using strong mechanical cleaning. It is recommended to use a roller washing machine to choose a gentle mode to avoid excessive friction to the Ski clothing.

5. Choose appropriate water temperature

Wash water temperature: 30-40 degrees temperature water.

6. Avoid sunlight exposure

(1) Take natural drying and avoid sun exposure, suitable for most Ski clothing fabrics.

(2) If the dryer is used, please adjust to a gentle and soft speed drying. After drying, dry for 20 minutes to activate the water -proof (DWR) effect of the surface.Once the water splashing is found to be improved, this operation can be performed at any time.

(3) If an iron is used, set the iron at low temperature and does not use steam, and place a piece of cloth on the Ski clothing and cook.This can help the splashing effect of the surface cloth on the surface of the clothing.

Leafmu bonsai production and maintenance

The leaf wood bonsai is made of beautiful tree -shaped shape, dense branches and leaves, strange leaf -shaped, and varied leaf color, which highlights a type of bonsai with leaf -viewing effects.Commonly used materials are red maple, chicken feet, triangle maple, Wei spear, waves of winter green, ten major contributions, ginkgo, wolf Bone, Soviet iron, brown bamboo, phoenix and other tree species.This kind of bonsai not only watchs leaves, but also has other ornamental effects.But with the bright and pleasant leaf color and the novel leaf shape of Yamei.The leaf wood bonsai has evergreen trees, which are evergreen in the four seasons and can be seen all year round.There are also deciduous trees. With the changes in the seasons, different colors are present. Although the cold winter leaves fall, they can still watch their cold trees.

How to make in the leafmill bonsai

1 , Choose tree species and cultivate :In addition to the cultivation of gardens in the cultivation of the leaf wooden basin, the sapling in the wild is one of the important sources of solution to the setting of the stump pelvis. Many masterpieces of masterpieces come from this.In the barren mountain slope or stone seams of the barren mountains, beside the road, beside the water, stone shore, and Chai Mountain forest, the normal plants grow in poor growth, and you can see it in the trees with beautiful attitudes and suitable for making landscapes.Processing.Of course, the tree species of the leaf wood bonsai can also be sowed through all kinds of seeds, cuttings, and seedlings, and then processing and cultivation. However, this method is relatively long.

2 planting the pot:The collection of leaf wood bonsai raw materials or seedlings need to be put on the pot first.The soil of leaf wood bonsai can generally use mountain rotten soil and then mix with river sand, or can be mixed with cypress rotten leaf soil plus river sand;The garden soil is mixed with a valley bran.

The time of leafmu bonsai is generally in the spring of each year2 Arrived in the end of the month 4 In the end of the month, if it is autumn leafmu bonsai upper pot can be in the year 10 To mid -month 11 During the moon.

The pots used in the leafmu bonsai can use different pots according to different bonsai, such as using porcelain pots, like a cliff -like bonsai can use the purple mud basin with a smaller basin.Shallow pot.

Pay attention to the position of the basin and the art effect of the bonsai in the pelvis of the leaf wood bonsai. If it is a garden basin, generally do not plant the leaf wood bonsai in the middle of the basin. It can be slightly a little bit, and the artistic effect is better.

The shape of the leaf wood bonsai is dominated by the trunk. The underneath of the general trunk is thick, and the top will gradually become thinner.

3 , Leafmu bonsai processing and finishing:After the pelvis of the leaf wood bonsai, some processing treatment is needed, so that the shape of the leaf wood bonsai will be more beautiful.Some of the processing methods that can be used are dry, peeling, carving, climbing, tearing and other methods.

How to raise leaf wood bonsai

Five taboos of leaf wood bonsai maintenance

1. Avoid soaking water

Long -term excessive watering can easily cause plants to flow into the soil due to dialysis, causing the plant to wither or even die.Like elm tree, golden bird, wolf Bone, simple tree, Yang Yang, etc. need special attention.

Second, avoid acid and alkali soil

my country takes the Huaihe River as the boundary,, Northern alkaline ,, Nando acidity, mountains and soil are acidic ,, Plain is alkaline.

The southern acid soil can be adjusted with soda or lime. The northern alkali soil can apply acidic Fertilizer or multi -use farm organic Organic fertilizer.

Three, avoid "Move the pot"

Each plant has a specific transplantation time, such as Chinan and Wolver Bone Avoid autumn Movement,, Peony avoid spring movement.

Fourth, avoid excessive trimming

In order to survive the survival of transplanting and trimming, the pruning and blades will be trimmed. There is no problem in common sense.But like pine and cypress plants, if over -pruning, it will affect the germination of the new buds.

5. Avoid sterilization at will

Su Tie, pine cypress are avoided"Potassium permanganate" and "Bacteria Clear", remember!

Morphological maintenance, trimming

Generally speaking, the trees are stronger, the growth is strong, and the growth is less cut.From the needs of the trees, it is usually cut off the cluttered cross -branch, overlapping branches, parallel branches, round branches, raw branches, thin branches, pathogenic branches, etc.The nutrient concentration of the branches can grow strong.

1 Pruning time

Miscellaneous wooden bonsai can be trimmed all year round, and pine and cypress should be trimmed in the dormant season.

In the rainy season, there are many rainwater, the air humidity is large, and the trees grow strong. It should be cut less. A large number of branches and leaves are cut off will affect normal growth.In addition, the end of the autumn should not be cut again, and the cold current will freeze to death.

The best time for re -cutting and strong cutting is1-2 The trees are in the dormant period.However, some cold -resistant trees should not be trimmed in winter, because the wound is difficult to heal, it is easy to leave scars.

2 Subcer

Tree species with strong buds in the bonsai are germinated and fast in the growth season. It should erase the root buds, dry buds and axillary buds in time.At the same time, pay attention to retain the direction, location and density of the bud.In order to avoid germination of fork branches, raw branches and overlapping branches, affecting the aesthetics of the tree.

3 top

The new shooting head of the tree growth period not only suppresss the new shoots, and promotes the growth of the side branches to maintain the beauty of the tree -shaped posture.The top -up time is different due to the different period of germination of different trees.Leaf and wooden bonsai, when the new leaves are expanded2-4 You can get topped when the film.Flower and fruit bonsai should be flexibly grasped according to different flower and fruit periods (topping can promote flowering).

4 Leaf

Proper leaf picking can reduce the leaves and promote new buds again to increase the ornamental value of bonsai.The time for picking the leaves is different from the tree species. The leaves can be picked in early summer or early autumn, and the evergreen trees should not be picked.During the period of picking the leaves, the water should be appropriately deducted. The pot soil should not be too tide. In addition, it should often apply rotten cake Fertilizer water to strengthen ventilation and light to promote the germinated new leaves.

What are the principles of Fountains?

Introduction to Fountain Principles

The principle of the Fountain is that the amount of mobility is conservative. From a large radius pipeline to a small radius pipeline, it generates a change of speed and rushes to the direction of the ground.The speed of the diameter is driven by the pump. The speed in the small radius is the original speed, which is transformed by the momentum conversion.You need to choose a micro -dollar to calculate the momentum conservation, so that you can find a speed. This speed is the exit speed, and then a toss of movement. This is an ideal situation. There is no friction and no wind.

Type of Fountain

In general, the Fountain landscape can be divided into two categories:

The first is to adapt to local conditions. According to the terrain structure at the scene, it is made from natural water scenery, such as: wall spring, Yongquan, Wuquan, Tube flow, streams, waterfalls, water curtains, water falls, water turtle, vortex, etc.

The second is to rely on the artificial landscape of Fountain equipment.This type of water scenery is widely used in the field of construction, with rapid development and a variety of types. There are music Fountains, program -controlled Fountains, swing Fountains, Running Fountains, bright Fountains, amusement fun Fountains, ultra -high Fountains, laser water curtain movies, etc.

Classification form

The Fountain is an artificial plastic surgery or a natural spring pond, which is sprayed with beautiful water positions for people to watch.The Fountain is an important part of the garden.In modern gardens, in addition to plant landscapes, Fountains are also important landscapes. It is both a kind of water scenery art, reflects the combination of movements and quietness, forming a bright and lively atmosphere, giving people a beautiful enjoyment. At the same time, the Fountain can also increase the air in the air.Negative ion content plays the role of purifying air, increasing air humidity, and reducing ambient temperature, so it is loved by people.There are many types of Fountains, which can be divided into the following.

(1) Ordinary decorative Fountain consists of various flower patterns to form a fixed Fountain.

(2) Combining Fountain Fountains and sculptures with sculpture form a landscape.

(3) Water sculpture is shaped by artificial and machinery to form a variety of large water pillars and forms landscapes.

(4) Self -control Fountain uses electronic technology to control water, light, sound, color, etc. according to the design program to form strange and changeable landscapes.

(5) In addition to the above types, there are also high Fountains, drought Fountains, stacking spring, music Fountain, Running spring, jumping Fountain, floating Fountain, sketch spring, Italian spring, music Running spring, etc., can also be formed by spraying to form by sprayingUnique water scenery.

The main form of water supply of Fountains is: DC water supply, water pump circulating water supply, and water supply of diving pumps.

The Fountain spray head is the main working part of the Fountain art modeling. Its role is to form a gorgeous water splash with a certain pressure of water with a certain pressure, spray it over the water surface.A variety of different nozzles configurations can create a variety of water scenery and landscapes, which are exciting and exciting and producing wonderful artistic effects.There are many types of Fountain spray heads. According to different structural forms, they can be divided into direct, rotating, water film, suction, atomization and other types.There are many types such as ice tower, open screen and spray nozzle.

With the application of light, electricity, sound, and automatic control devices on the Fountain, the emergence of music Fountains, intermittent Fountains, laser Fountains, etc. have enriched the content of the Fountain and enriched people's dual feelings in visual and hearing.The famous Fountains in the history of my country such as Beijing Yuanmingyuan Daishui Fountain Group, modern Fountains on both sides of Beijing Tiananmen, and temporary Fountains on the National Day Tiananmen Square are very magnificent, winning the praise and applause of Chinese and foreign tourists.

Fountain

The Fountain was originally a natural landscape, the ground appearing on the ground.The Fountains in the garden are generally decorated with decorative water spraying devices for landscaping.The Fountain can moisturize the surrounding air, reduce dust, and reduce the temperature.The fine water beads of the Fountain hit with air molecules, which can produce a large amount of negative oxygen ions.Therefore, Fountains are beneficial to improving the appearance of the city and the physical and mental health of residents.

Appreciation of the world's first Fountain picture

On the beautiful landscape of Canberra in the Australian capital.There is an artificial Fountain with the highest spray in the world.This Fountain was established by the Australian federal government in 1970 to commemorate Captain Cook for 200 years.Named "Captain Cook Memorial Fountain".

The spray port of the Fountain has 750 horsepower power and has two layers of water pumping systems.The Fountain has a spray speed of 200 kilometers per hour.The maximum jet limit is 150 meters.Looking at it from a distance, a water pillar on the lake was flushing the sky, the waves splashed, and they were spectacular and were become the world's first Fountain.