1. What should I do if the ceramic Flower pot is always rotten?

The ceramic Flower pot comes with glaze, which is very poorly breathable and permeable. The ceramic Flower pot is large and deep. It needs to be installed with a large amount of soil.The soil will become tighter and tighter, and in the end it becomes impermeable, and it is very easy to accumulate water, so it is easy to use ceramic basin to raise flowers.If the flower friends have to use ceramic pots to raise flowers, they need to master some maintenance skills in order to raise flowers.

Method 1:

1. First prepare the stone -sized stones, cover the porcelain basin bottom, and then lay a plastic gauze net on the stone. Another layer of coarse sand is spread on the gauze network. The thickness of the rough sand is about 2cm.

2. Prepare a white iron or hard cardboard. The width is slightly longer than the perimeter of the Flower pot, and the height is slightly higher than the Flower pot.Then surround a cylinder with a diameter of 2cm smaller than the Flower pot and put it in the porcelain basin.

3. In the middle of the cylindrical and porcelain pots, fill the coarse sand, then put the pot soil inside the cylinder, gently compact the pot soil and slowly pull out the cylinder.

4. Pour water once. At this time, the pot soil will be in contact with coarse sand. The bottom and surrounding rough sand layers of the Flower pot will become a channel for breathability and permeability of the plant.

Method two:

You can spread a layer of ceramic grains at the bottom of the ceramic Flower pot. The grains of the cushion are at least one -third of the depth of the ceramic Flower pot, which can ensure the breathability of the pot soil.It should be noted that you must not pad stones. The main ingredient of the stone is calcium carbonate, which will affect plant growth.

Method three:

The soil used in ceramic Flower pots is best to be loose and breathable, light soil, and ceramic Flower pots are not breathable, so you need to choose some soil with strong breathability, which is more conducive to breathing in the pot soil. Naturally, it is naturally natural. Naturally, it naturally.Its roots will also grow better.

Method 4:

The bottom of the ceramic Flower pot is best matched with a cushion to breathe the bottom. There is only one small hole at the bottom of the ceramic basin, which is completely impermeable, especially after the Flower pot is directly contacted with the ground, there is no breathable space, so you can choose the mat in the mat., A breathability will be stronger.

Method 5:

In the end, there is a trick, which is the maintenance of the pot, which is to put the ceramic Flower pot outside the plastic Flower pot. This will not affect the beauty nor the effective breathing of the plant.

2. precautions for Ceramic Pot to raise flowers

Pay attention to the ceramic flowerpot when raising the ceramic pot, and the drainage and breathability are not good. Therefore, do not produce water during watering, otherwise it is not conducive to the growth of flowers.In addition, good air circulation must be guaranteed, which is also helpful for water evaporation and plants.

[Bride jewelry Production] How to make bride and jewelry production tutorials for bride jewelry

How to make bride jewelry

Bride jewelry Making Tutorial

How to make a bride headdress 1:

First choose the flowers you like, at least one of the larger flowers in the selection, and then use a part of the smaller petals as a decoration. It should be noted that the bride should wear this flower headwear all day long all day., You need to know what flowers have been preserved for the staff, so as to prevent the wedding from ending the flowers.

How to be a bride headdress 2:

Pour the largest flowers, trim it to the position near the buds, and leave it at the buds10cm The length of the hair clip is used as a small flower. As for those smaller flowers, just leave the space similar to the width of the hair clip.

How to make a bride headdress three:

Stick the trimmed flowers from small to large on the large hair clip. At this time, you need to control the amount of glue. Just use a little glue to use a little glue.In one minute, fix the flowers on the hair clip.

How to be a bride headdress four:

When you stick all the flowers on the hairpin, you can adjust the flowers appropriately when you are completely dry to make the flowers more perfectly fused. When adjusting, it is mainly neat.Essence

How to make a bride's headdress five:

The beautiful flower hair accessories are completed. Of course, you ca nt wear it at this time. Remember to place the finished flowers and headpieces for a period of time to determine that the glue is completely hardened before wearing it.

Xiaobian concluded: The above is how to make the bride's headgear and the simple bride flower headwear tutorial, have you learned?Flower headdress is not only suitable for the hairstyle of wave rolls, but also suitable for wearing during hair. Hurry updiy A beautiful flower headgear!

The perfect combination of Wall cabinet installation skills and functions

The Wall cabinet is a relatively special type in the cabinet. The cabinet of the Wall cabinet can be a sandwich or a wall. It is a model that makes full use of the kitchen space.Ideal choice.However, when installing the Wall cabinet, it is also particular about skills.

The perfect combination of Wall cabinet installation skills and functions

FirstThe cabinet of the Wall cabinet can be a wall or a sandwich, which can ensure the effective use of space and not deform.However, it is necessary to achieve the horizontal level and the vertical on both sides. If there is an error, the height difference between the left and right sides of the left and right sides is required. The bottom wheel of the Wall cabinet door can make up for the error by debugging the system.

secondThe installation home cabinet of the interval generally has drawer design. In order not to affect the use, pay attention when designing the position of the drawer: you should avoid two intersections when making three sliding doors;On the side of the door; the drawer should have 17cm gap between the side wall of the drawer when making a folding door.

thirdWhen installation of the orbit, it is necessary to reserve the size of the track.The installation of the Wall cabinet door is generally completed by professionals.

fourthThe installation of the Wall cabinet door is generally completed by the professional staff. The steps are: first fix the top rail, the surface of the track front is on the same plane as the cabinet surface, and the upper and lower rails are placed in the reserved position; then the upper and lower rails are placed in the reserved position; then the upper and lower rails are placed in the reserved position;The two doors are loaded into the rail, measured the verticality of the door body with a horizontal or straight ruler, adjust the position of the upper and lower rails and fix it; to check whether the door body is parallel to both sides, the door body can be adjusted by adjusting the bottom wheel to achieve the frame to achieve the frame.With the level on both sides; finally fix the anti -jump device and show the quality protection book.Users can inspect whether the selected Wall cabinet door brand is professional according to this installation program.

1. Can a suspension at home?

The Hammock is a casual bed. It is usually used during Outdoor Camping. Some friends like to sleep on the Hammock. I want to install a Hammock at home. So can I install a suspension at home?

Generally speaking, the Hammock can be installed in the home space. When it does not hinder daily life, install a suspension at home. The best installation location is recommended to the balcony, the window of the living room, the corner of the bedroom, etc., and it looks like it looks like.Beauty will not occupy too much space for daily activities.

However, it should be noted that the mount at home is not recommended to be used as the main bed in the room. After all, the comfort of the suspension is not as good as the traditional bed Mattress, especially when it takes a long time to sleep.

2. What should I pay attention to when the suspension is installed in the room

Pay attention to the factors that are installed indoors in the interior, especially security, especially safety, so as not to cause trouble. Installing a Hammock in the room, the following three aspects cannot be ignored:

1. Type selection of hammocks

There are a variety of Hanging beds such as solid wood hammocks, rattan camplars, and fabric hammocks. If the space in the home is relatively large, you can choose to install a solid wood suspension indoors. If you want to be romantic, and the space is relatively small, you can principically edit the camisole.Putting on a sunny balcony, it is also very pleasant to lie on the balcony. For fabric hammocks, because of its flexibility, we can install it outdoors or even take it out of the outing.

2. Selection of the location of the Hammock

After all, the main component of the Hammock is used to romantic, so choosing a balcony when installing is the best place, because the area of the balcony is more suitable for installing the Hammock. At the same time, it is better to install the suspension here as a place that can be exposed to the sun every day.If you have friends who like to install a Hammock in the living room and bedroom, it is recommended to install the Hammock in the corner, so as to save space, so as not to waste the use of other places because of a suspension, and pay attention to selecting a smaller suspension as much as possible.

3. precautions for suspension installation

Installing a suspension is usually drilled on the wall. When drilling, be careful not to hit the brick seam, so it is easy to fall off.In addition, the requirements of the wall drilling of different materials are also different. For example, solid bricks are safer, and special tools can be installed directly to hang the Hammock, but if it is hollow brick, you need to get rid of the hole after drilling the hole.Treatment with concrete, otherwise it may cause the suspension to be unstable.

How to turn the seeds DIY potted plants to teach you how to make the seeds of the seeds

The seeds mainly come from the fruits that are eaten usual, and some vegetables can be.For example: grapefruit, coriander, orange, litchi, longan, lemon, orange, fresh lotus seeds, peanuts, Dragon Fruit, yellow peel, durian, taro, Sweet potato ... and so on.So after eating the fruit next time, think about it before throwing away the seeds!Find a basin, bury the seeds, and add some concern. Soon after, there will be a small forest.Each seed has magical power!

Step 1: Select soil carefullyThis is the key to supplying nutrients.Good quality cultivation soil is most suitable for planting indoor seed pots.My soil was dug back under Baiyun Mountain. There are many earthworms there. I think it is a fertile performance, otherwise the earthworms will definitely move.

Step 2: Fresh seedsEssenceWhether it is the seeds left after eating the fruit or picked it up on the roadside, they must distinguish the freshness of the seeds.Usually, the buds are black or the epidermis is not fresh.Because non -fresh seeds do not sprout, planting will affect the beauty of the entire potted plant.

Step 3: Remove buds and soak waterEssenceIn order to put the seeds in the soil, it can germinate long roots quickly. Generally, the seeds are soaked in water for about 7 days, and they must change the water every day.If you don't change water every day or soak water for too long, the seeds will rot.

Step 4: Differential budsEssenceBefore putting in the soil, be sure to know where the bud point is.Because some seeds must be grown downward, and some are facing up.(This is difficult, the correct planting is often summarized from the failure)

Step 5: Properly arranged seedsEssenceTo have pleasing potted plants, the arrangement of seeds is the key. Be sure to arrange step by step according to the size of the seeds.Remember, the smaller the seeds, the closer the arrangement, so as to plant the feeling of the small forest.

Step 6: The appropriate size of stonesEssencePut on the top, using its weight to make the roots stronger.

Step 7: Spray waterEssenceOnce every two days, spray it back and forth with spray water sprayers.

Step 8: RizhaoEssenceThe ability of seeds to adapt to the environment is beyond imagination.From the moment it germinated, it means that it has adapted to the indoor environment and can use the weak indoor light for photosynthesis.If the potted plant is moved outdoors at this time, the plant will quickly end life.

The utensils to be prepared:

Basin: I prefer to buy a hole -free basin, because many potted plants are placed on the desktop, and there is no hole to keep it clean. There are some holes.And the dish and the pot are also a sanitary corner.The disadvantage of a hole -free basin is that it is difficult to accurately grab the amount of water. This is to be summarized by itself. Generally, it is enough to spray three laps with a spray bottle back and forth.

Water sprayer: Essential water, because it is a hole without a hole, so do not irrigate directly. It is best to use a water sprayer, which is even uniform.

plastic wrap: Some relatively small seeds are sealed with plastic wrap after planting, so that the seeds will not dry quickly.

The exquisiteness of a potted plant lies in the selection of the seeds, the choice of utensils, and the method of planting.Scenery is a personal art of the growers, especially the choice of utensils.After more experience, it is clear that after the shape of various seeds grows, it can also be mixed with planting to make the landscape.

As a non -professional person, I like to plant and enjoy it. It is just a little experience. It has not yet risen to rational understanding. It is inevitable that non -scientific awareness has occurred. Therefore, the above methods and views are not necessarily completely accurate.

Yellow Skin

Grapefruit, my favorite one!

Sweet potato, hydroponic, I just found a chocolate box to install it in the beginning.

After the Sweet potato grows, it can actually make a lot of shapes. The vine can grow very long, as long as you have creativity.The shape of the Sweet potato is strange as possible, and some twin -like two companies are together.

This is lychee.

The work of the two seasons of spring and summer:

seeds change potted-grapefruit

The leftovers and kumquat cores are soaked in water for a week.

The soaked appearance and color seem to be a bit deep.Use the mules to remove the epidermis, be careful not to hurt the germination point.

By bareness is to germinate.

Ready to the pot.

The Mark Cup is first on the Nutritional soil.

Use the dumplings to row the grapefruit cores one by one.

Finally, some small stones were covered and sprayed some water on it.

It's half a month, it seems that there is nothing moving?Take a closer look ~

Some seeds have quietly emerged & gt; 0 & lt;

This is what the little forest looks like.

You are finally cute for more than half a month!

Since the first Miaoer has been adorable, almost two or three more every morning every morning.Essence

On the left is kumquats, the middle grapefruit, and the right side on the right. It is planted in the same period. It feels like grapefruit grows much faster ~