The 38th Antarctic Inspection of China was jointly performed by the "Snow Dragon" Ship and the "Snow Dragon 2" Ship.The "Sherong" Ship returned to Shanghai's domestic base terminal on April 26, 2022, with a schedule of more than 33,000 nautical miles.

The first group of members of the 38th Antarctic Inspection Team in China set off on November 5, 2021, which lasted for 174 days.Observations, surveyed the Nanda Ecosystem, actively conducted international cooperation of materials supply supplies, and achieved a number of scientific research results.

Since the 26th Antarctic Investigation Mission in 2009, the road visitor has been the "China South (North) Polar Visiting Product Production Products".The equipment guarantee for work brings the inspection team members "the ultimate guardianship".

The warming function of the equipment is of course indispensable. The polar product designed and developed by the roadkeeper must first be tested at a test equipment of minus 70 C.Only by feeling the polar climate can we effectively protect the body temperature of each scientific test player.The costumes of the Antarctic Survey Team developed by the roads contain TIEFWARM hollow hot cotton, which can greatly lock the super -warm function of "spontaneous heat, internal heat storage".While keeping warm, waterproof and wetness in the cold polar environment is also particularly important. Pathfinder uses TIEFPRO waterproof and humid technology fabrics. It consists of four layers of waterproof processes, which can quickly guide the sweat generated by exercise out of the body.Make the clothes in the clothes dry and refreshing.Its waterproofness is much higher than that of national standard products. After drying and drying many times, its waterproof function remains excellent.Make the scientists get a safe and comfortable experience in their work.

From the beginning of the northern and North Pole to the completion of multiple inspection stations, China is inspecting a large country from a polar country to inspect the polar country from a polar country.As a representative of Chinese Outdoor brands with social development responsibilities, the road visitor also fully demonstrates its strength and scientific and technological content, closely integrated Outdoor equipment research and development with polar work content, and jointly promotes the construction of polar inspection work.brand image.

The 38th Antarctic Inspection showed China's scientific research strength. The 13 -year -old escort of the roadkeeper also showed the scientific and technological strength of Chinese enterprises!As the first Chinese Outdoor brand that shoulders social development responsibilities and burdens, the roadkeeper will continue to work with the polar inspection work with the South (North) Polar Inspection Team of China to help Chinese scientific investigation and development!

1. What is Outdoor power supply

Outdoor power supply is an Outdoor multi -functional power supply with built -in lithium -ion batteries and its own reserve power, also known as a portable cross -current power supply.Outdoor power supply is equivalent to small portable charging stations. It has the characteristics of light weight, high capacity, large power, long life, and strong stability. It not only is equipped with multiple USB interfaces to meet the charging of digital products, but also output DC, AC, cars, and cars.Common power interfaces such as cigarette lighters and other common power supply can supply power for laptops, drones, photography lamps, projectors, rice cookers, electric fans, kettle, cars and other equipment.Emergency electricity consumption and other scenarios.

Second, the working principle of Outdoor power supply

Outdoor power supply consists of control boards, battery packs, inverters, and BMS systems. It can convert DC power through the inverter into AC power that can be used for other electrical appliances. At the same time, it also supports multiple interface DC outputs to charge various digital devices.

3. Charging method of Outdoor power supply

The charging methods of Outdoor power sources on the market are mainly these: AC communication, Solar charging, car charging, Type-C charging.

1. Solar charging

Outdoor power sources and portable Solar panels are used. As long as there are sunlight, solar energy can be used to charge.A 400W Solar panel can be fully charged within 4 hours, providing a steady stream of electrical energy for various electrical appliances.In addition, Outdoor power sources are mostly general input interfaces, which can be compatible with a variety of Solar panels on the market.Of course, some products on the market also support multiple Solar panels to connect to charging at the same time.Some can support up to 6 110W Solar panels at the same time to charge.

2. AC AC charging

In any place where there are AC interfaces, charging can be charged through the AC interface.Similar products on the market are 6-12 hours.

3. car charging charging

Users who drive can charging through the car filling port. However, compared with AC, the charging charging is slower. Generally, it is full of 10 hours.

4. Type-C charge

The product has a Type-C input port, which can be charged through the interface.

It can choose conventional charging or Solar charging according to different usage conditions. It can provide an AC AC output of 100-240V of 100-240V, and configure a variety of DC output modules such as 5V/9V/12V.Emergency use of various types of loads.

one,Why should the fishing rod wrap the sweat -absorbing Belt

The fishing rod can grasp the fishing rod more stably on the fishing rod, and it is entangledSweatEven if you are sweating, you can not slide the pole. The fishing rod handle is comfortable, and the fishing rod itself is a lot more beautiful.in addition,WillSweating beltIt has a certain protective effect on the handpan, especially for competitive fishermen.

2. How to wrap the fishing rod in sweat absorption belt

Method 1:

1. First prepare the Tool, a scissors, and a roll with a roll, you need to wrap the fishing rod.

2. There will be black tapes corresponding to the brand in the tangled Belt. Do not throw this. It will be used when it is closed.

3. Use scissors to cut a corresponding diagonal angle on the entangled band to fit the round shape of the fishing rod grip. This angle can be determined based on the round diameter at the end of the Fish rod grip. You can test it yourself.

4. Follow the edge of the grip at the end of the grip with a diagonal angle, and then wrap it evenly. At this time, you can use a little force to prevent it from dispersing in the future.

5. Then there is a gentle winding up. Pay attention to the distance between each circle of entanglement bands. This will be a beautiful point of view.

6. Then it is the end. In fact, the end is the same as the beginning. It is to cut a diagonal angle on the entangled band to fit the round shape of the fishing rod.You can first find a pen to make a mark on the entangled band to facilitate cutting more accurately.

7. Finally, you have to use the black tape that starts to roll the wrapped band.Just roll with a black tape and roll the wrap band.

Method two:

1. Press the thin end (start) of the sweat -absorbent Belt on the side of the bottom cover of the handle.Generally, double -sided adhesive stickers are attached to the beginning of the sweat absorption belt.Fix the sweat absorption belt. If you shoot your left hand, the direction is the opposite.

2. Hold the handle with your left finger to rotate it clockwise. At the same time, the right hand controls the direction of the sweat absorption belt, so that the sweat absorption belt is aligned.SweatThe edges of the band can overlap each other, heavyholdThe overlap depends on personal preferences, usually 2 mm.

3. The sweat absorption belt is wrapped to the bottom according to the above method. At this time, cut off the excess sweat absorption belt. If necessary, you can trim the sweat -absorbing Belt upper edge.

4. Prepare the Belt tape and wrap the end of the sweat absorption belt with tape until it will not spread.

1. How to wear ski gloves

1. Stall for ski gloves first and put it flat on the palm to ensure that the palm can be completely put into the gloves.

2. Put the ski gloves on your hand and adjust the position of the glove finger so that your fingers can be smoothly inserted into the finger Sleeve.

3. Tighten the wrist of the ski gloves to make the glove fit the wrist, and ensure that the wrist will not feel too tight or uncomfortable.

4. Check whether ski gloves are close to the hands, and there will be no too much wrinkles or relaxation.

5. If you need to adjust the tightness of the ski gloves, you can adjust the size of the wrist to make it more fit the wrist.

Note: Before wearing ski gloves, make sure your hands are dry to avoid humidity inside the gloves and cause the hands to feel cold.At the same time, check whether the ski gloves are intact, and it should be replaced in time if it is damaged.

2. precautions for ski gloves

1. Select the right size:The gloves should be slightly loose, but it should not be too large or too small. Excessive gloves are easy to fall off, and too small gloves are easy to limit hand activities.

2. Check the quality of gloves:ski gloves should have a certain amount of abrasion, anti -slip, waterproof and other properties to ensure the safety and comfort of the hand.

3. Make sure the wrist is comfortable:When wearing gloves, you should adjust the wrist mouth to the right position. It should not be too tight or loose to avoid wrist fatigue or discomfort.

4. Avoid excessive friction:During the skiing, the inner and outer layers of the gloves should avoid excessive friction to prevent heat and discomfort.

5. Replace gloves regularly:Because ski gloves are high frequency and are easy to wear and aging, gloves should be replaced regularly to ensure the safety and comfort of the hand.

Sanitary racks are good or space aluminum is good

(1) Space aluminum bathroom frame

advantage:

Space aluminum bathroom rack is a new type of environmental protection bathroom product that is popular in recent years. Space aluminum is a high -strength and corrosive performance aluminum product. The surface is generally oxidized or brushed., Durable and cost -effective.Environmental protection is better than ordinary copper bathroom supplies, and the oxidation is better than stainless steel. It is more affordable while maintaining a beautiful appearance, becoming a favorite product for consumers.Therefore, space aluminum bathroom racks are still ideal.

shortcoming:

Space aluminum cannot be plated, so the space aluminum racks on the market are generally sub -light products, and the surface is sub -light color. Although potions can be used to dye them into various kinds, there is no light -plating color at all, and the sub -light productThe biggest problem is that it is difficult to clean, so it will be more troublesome to clean up later.The quality of the space aluminum shelf is light, the texture is crispy, the surface is prone to scratches, and the bending properties are relatively weak. Therefore, it is easy to deform after using it for a period of time.Essence

(2) Stainless steel bathroom frame

advantage:

The stainless steel bathroom shelf is relatively heat -resistant and low -temperature resistance, has strong corrosion resistance, has a large hardness, is not easy to deform, and can hang items with relatively heavy quality.Because the bathroom is warm and humid, the general material is easy to rust, so stainless steel is very suitable for the bathroom bathroom supplies.

shortcoming:

The main disadvantage of the stainless steel bathroom stand is that the cost is high.In addition, stainless steel is difficult to welded, and the metal processing performance is relatively poor. Therefore, the craftsmanship of the stainless steel bathroom shelf is generally relatively simple, and the style is relatively single.The stainless steel bathroom racks are generally used after electroplating and polishing, so after using it for a period of time, the plating layer will produce oxidation. It is older to see, so the stainless steel shelf needs to be maintained regularly.

installation location of bathroom racks

When installing a bathroom rack, consider the location and size of the rack.Under normal circumstances, the bathroom racks are mostly installed on the right side of the water heater or above the washbasin, so that it is convenient to pick up items.The height design of the bathroom shelf is best based on the hand. Generally, the height of the human chest is considered reasonable, almost 1.5m.If it is a relatively short woman, it can be adjusted to 1.3m.In addition to the height, depending on the left and right hands of the shower with different people, it can be installed in the opposite position, which is usually within the distance of the arm.

1. towel rack: It is mainly installed outside the bathtub. It is about 1.8m from the ground. The upper layers are placed in a bath towel and a towel on the lower layer.

2. Cup holder: Generally, it is installed on the walls on both sides of the washbasin, forming a line with the makeup rack, which is mostly used to place toothbrushes and toothpaste. The installation height is generally between 90-110cm.

3. towel rack: It is mainly placed in various types of towels to prepare from time to time. It can be installed on an open wall on the core of the bathroom, about 1.5m from the ground.

4. Toilet brush rack: It is mainly used to hang the toilet brush. It is mostly installed on the wall on the back of the toilet. After the Hanging, the brush is at least 10cm away from the ground.

5. makeup rack: The height of 30cm is the best at the height of the grinding basin on the top of the washbasin or below the makeup mirror.

6. Corner glass frame: It is mainly suitable for families that place washing machines on the bathroom, installed on the corner of the washing machine. The distance between the surface and the washing machine was 35cm. It was used to place washing powder, soap, detergent, etc.

7. towel rack: It is easy to get on the wall on the side of the toilet, and it is easy to get enough, and it is not easy to see. The general installation height is 60cm from the ground.

8. hook racks: Hanging clothes in the bathroom, mostly installed on the wall outside the bathroom, the height of the ground should be about 1.7m.

Step of bathroom rack installation

1. Preparation Tool

First of all, you must purchase a suitable size frame according to the space of the bathroom, and prepare basic commonly used tools such as impact drilling, hammer, Tool knife, screwdriver and other basic tools.Note: According to the size of the expansion screws used in installation, choose the big drill of the largest one.

2. Positioning

Find the right position on the wall, measure the height and hole distance with the tape ruler, and mark it with a pen to determine the location of the frame installation.Then, drill drilling on the wall with an impact.

3. Install screw fixing

Put the expansion screws in the hole, then knock the plastic expansion screws into the hole with a hammer, cut off the excess part with a knife, fix the bottom of the pendant base with a screwdriver on the wall, and then use the screw knife to tighten; then the main body of the pendant will be tightened;The position is adjusted and tightened the screw with the inner six wrench.

4. Install the rack

Insert the rack into the fixed screw, adjust the position, and avoid the rack tilt down due to gravity; finally, tighten the screw with a wrench, so that the bathroom shelf is installed.