What equipment is needed for self -driving Camping

Nowadays, self -driving and Outdoor Camping has become a vacation travel method that many young friends desire. Self -driving Camping can carry more camping equipment. What are the self -driving camping equipment?

1. Equipment

(1) car: Of course, cars are the most important. It is best to be SUV. Generally, cars are also possible, that is, it is difficult to cross rotten roads and pits.The most important thing is to thoroughly detect your car. Routinely check the oil, coolant, help oil, glass water, and focus on whether the tires, spare tire pressure and tire wear are normal, and whether there are nails on the tires.If possible, go to the 4S shop to check the engine, brakes, ABS and circuit conditions.

(2) Road book: also a detailed plan for travel, including where to eat, rest, Camping.Before departure, you must carefully study the map and repeatedly explore the travel routes. Basically, go out and come back and do not take the same route to ensure the most of the attractions.

(3) Spare tires, jack tops, air pumps, trailer ropes: These are all necessary products for self -driving Camping.

(4) Large national map and destination tourism guide: We must prepare a few large maps such as China highway and urban and rural highway network atlas.The target of destination tourism guidelines has detailed tourist attractions and precautions for the introduction of tourism attractions and clothing, food, housing, and transportation, which is also very important.

(5) Small laptop computers: It is best to bring wireless Internet cards. You can access the Internet and chat when you rest in the wild Camping. You can also send a signal for help in emergency situations.

(6) Notepad, pen: The person sitting in the co -pilot position is responsible for recording the fuel consumption, road conditions and interesting things that happened along the way.If you take the number of kilometers in the exit and service area at a high speed, so that you can walk and help friends and netizens next time.

(7) Vehicle intercom: If the team is best to buy a walkie -talkie, not only can save a lot of mobile phone costs, but it is particularly important to talk about the intercom when there is no signal on the mobile phone.If there are more than 6 vehicles in the team, they will group the team.Every 3 groups.This can facilitate driving and effectively prevent rear -end.One person per person is convenient for each person.

(8) Hand -holding ghost headlights and strong light flashlights: It is very useful when the car fails or Camping at night.Prepare a leather cushion and use it when repairing the car.

(9) Swine tools and multi -purpose combination clamps: Don't bring them, but you must bring it together.Multi -purpose combination pliers are the most useful.

(10) Vehicle inverter power supply: During the Camping, both laptops and mobile phones were used.

(11) Metal gasoline barrels: self -driving tour, self -driving two or 30 -liter gasoline is useful.Be sure to use a metal barrel. Plastic barrels can easily cause fire.

(12) Parking warning signs, thick wooden boards, and engineers: car failure or when caught in the car.

2. Personal equipment

(1) ID card, driver's license, driving license and wallet: It is best to carry a good money and ID card, driver's license, driving license, vehicle and boat use tax, and road fee payment documents, insurance companies, and rescue companies.Certificate of the car.Handbags, Bags and other luggage and valuables should not be observed outside the car when they leave the car to avoid causing thief.

(2) Prepare enough banknotes: When traveling to self -driving cars in other places, miscellaneous fees such as buying tolls, bridges, and parking fees are used anytime, anywhere.Convenient for others.

(3) Bring two sets of car keys: Be sure to bring two sets of car keys to prevent the midtop key from being lost.

(4) Clothing and other: chopped jackets, jackets, Assault pants, Outdoor shoes, high rain boots, mountaineering shoes, Sunglasses, Myopia glasses, crack lip balm, sunscreen, sun hat, inflatable pillow.You must choose a pair of hiking shoes when you go out.The ideal Climbing shoes need enough space, and it is easy to wear and take off even wet or snow.The tongue of the boots needs to be waterproof.The sewing line needs to be narrow to avoid water immersion.The toes and heels need to be protected by 2-3 layers of leather or fabrics.The front end of the toe is harder, and it will not be squeezed or kicked by hard ice and snow due to the bruise Belt.The heels have a hard increase in the stability of the feet during the march, so that you can step on the foothold downhill.

(5) Most of the headscarfs: you can make bibs, headscarves, masks, hats, sweat strips, you can make eye masks while sleeping, especially in the plateau area, the ultraviolet rays are strong and dusty. This headscarf can wrap the entire face, which is very useful.

(6) Casual food and fruits: chocolate, beef, jear, chicks, chicken crickets, American ginseng slices, fruit sugar, mint sugar, vitamin C with tablets, fruit treasure, etc.; Small tomatoes, apples, pear, orange, Cucumber, peach, peach, Sweet melon, etc., can supplement physical strength and sober mind, which will play a great role.

(7) photography equipment and mobile phones: It is necessary to leave beautiful memories on the journey. According to personal hobbies, bring digital SLR, lens, digital camera, camera, three tripods, flash, card readers, digital partners, etc.Do not forget the charger with cameras and mobile phones.camera mobile phones and other valuable items are best to have their own secret Bags and moisture -proof Bags in case.

(8) Water cup: If the temperature is low, it is best to keep the insulation cup, and water is an indispensable thing for people.

(9) Napkin paper, wet towels, toilet paper, toothpick, and nail knife: These are individuals.

(10) Toothpaste, toothbrushes, cups, towels, shaving knives, shampoo: These are also necessary items for individuals.

(11) Poker, gum: You can play cards during rest. It is good to eat a gum after meals.

(12) Anti -mosquito flower dew water, cool oil, wind oil essence: These are all necessary for tourism.

(13) Backpack: There are two types of mountaineering Bags, one is a large Backpack with a volume between 50-80 liters; the other is a small Backpack with a volume between 20-35 liters, also known as "assault bag".Mountaineering -specific backpacks are designed to cope with extreme environments. The production is sophisticated and unique. Generally, the back of the bag is designed according to the natural curve of the human body, so that the bag is close to the back of the person to reduce the pressure of the strap to the shoulders.This type of bag is generally made of waterproof and tear -resistant materials, which is very durable.

(14) Climbing stick: Cutus, Climbing stick, triangle.

(15) Umbrella, raincoat: This is a must -have for tourism.

(16) Mountain bicycle: bicycles can not be available to the car, which is very useful.

(17) fishing instruments: If you like fishing, bring it.

3. Field Boxing Box

When crossing or adventure in the wild, in addition to those professional equipment, you also recommend that you bring a small field first aid box (or you can also call it a "wild life box").Don't look at it small, it will play a great role at a critical moment.

(1) lunch box: It is best to choose a lunch box made of aluminum or stainless steel (preferably with handle).Because the lunch box itself can be used to heat, lift water or snow, and can play a role.Although the plastic box is light, it cannot be heated, and it is limited to use.At the same time, the metal cover of the lunch box can be used as a reflector. At a critical moment, it can send a signal for help.Use a large number to facilitate the following items.

(2) Drugs: disinfection sand cloth, hemostatic bandage, band -aid, cold medicine, anti -inflammatory drugs, gunpowder, digestive adverse drugs, antibacterials, Neckropin, anti -motion -proof drugs, vitamin pills, safflower oil, wind oil essence and essence and wind oil essence and wind oil essence and wind oil essence and wind oil essence and wind oil essence and wind oil essence and wind oil essence and wind oil essence and wind oil essence and wind oil essence and wind oil essence and wind oil essence and wind oil essenceA small bottle of alcohol cotton ball and so on.These are all necessary supplies for first aid.

(3) Medical tape: Don't underestimate any gadgets, it is the fastest repair agent.When your coat is cut and the Tent is blown, its role appears.Although its basic function is to paste gauze, but a little bit of your imagination, you can find that it can come in handy.

(4) Swiss Army knife: It is absolutely necessary to equip a multifunctional Tool knife in the wild.Although it is not necessary to use the jungle Fighting knife similar to Lambo, the Swiss military knife is essential.In addition to integrated conventional small knives, ups and sons, scissors, there are saws, screwdrivers, knife knives, etc., and even a magnifying glass! It is best to be large.

(5) Kit purse: Of course, the function of modern needle wire Bags is not only the original simply sewing supplement. The needle can not only be stabbed, but also can be bent into a fishhook to improve the meals, and even life -saving.

(6) Match: In the wild, the fire species is almost everything.It is important to bring windproof match, but if you can't buy such a match, you can also DIY.The method is very simple. First, the candle is melted and evenly applied to the ordinary match. When used, remove the wax on the match head.In order to better play our DIY's "powerful" windproof and waterproof function, they can be placed in the empty film box.

(7) Candle: A small section of candles is absolutely useful in the wild.The modern lighting devices such as flashlight and headlights have become furnishings with the exhaustion of the battery.At this time, the candle shows its "heroic character".In addition to lighting, candles can also heat and fire.If you cut a mineral water bottle to make a lampshade, you have a windproof lamp used in the wild. Its "power" is large enough and the work efficiency is improved a lot.

(8) Survival whistle: In fact, it is a general whistle, but in the wild, the role of the whistle is not just the black whistle blowing on the court.Now it can save your life.When you are in danger, you can use a whistle to attract rescue, or scare away some little beasts.

(9) Aluminum film: This is a 2x2 -meter -plated thin film with gold and silver.It can not only prevent wind and rain, but also support it into a pergola to prevent direct sunlight.In the cold area, you can wrap yourself and keep your body temperature.The biggest effect of aluminum film is to reflect, so that rescuers can discover you in time.You can usually use it on the local seats on the ground.

(10) North needle: Even if you bring GPS, your watch also has an electronic compass, and some primitive northern needles are still essential.In the wild, no one can guarantee that the advanced equipment will not be out. At this time, the small northern needle can help you find the way home.

(11) Siligantail: Although it is a very ordinary office supplies, it can play a role in the wild.It has been used to clamp the broken Backpack band, the pants on the line, the shoes that take off the bottom ... Although we don't want to let it play, it may be useful to prepare a few more.

(12) Pencil: Want to write something in the wild, what pen? Parker? No, the most expensive thing is not necessarily the best.The harsh environment in the wild makes the pencil the best choice and the only choice.It is recommended to choose a pencil of more than 2B, of course, a small roll of pen knife.You can also use active pencils, but you need to bring enough pens.

(13) Paper: It is best to have a notepad. If it is white, it is better.

(14) Several bottles: Put salt, fruit candy, and vitamin C, respectively.These humble foods may be a good medicine for life -saving.

(15) waterproof self -sealing Bags: can prevent some things from moisture, such as mobile phone batteries, digital camera batteries, matches, etc.

4. camping equipment

(1) Tent and sleeping bag: Its role is to provide a comfortable rest environment, allowing us to fully rest, and at the same time, it also covers the wind and rain for us.Prepare for tomorrow's long travel.The principles we choose on these two equipment are: to prevent heavy rain, so the technical indicators of his PU coating should be above 1500mm.The choice of Tent should be very cautious, and some leisure -level tourist tents are not within the scope of our consideration.

(2) Wide -proof pads: Cold and tide.The simplest is the foaming pad, an aluminum film, wear -resistant layer, and wave -type optional.The performance of automatic inflatable cushion is better, as long as you can move.

(3) Garbage Bags: Everyone is responsible for protecting the environment, strive to be a civilized person, and takes away the garbage they generate.

(4) Outdoor tables and chairs: folding tables and folding chairs are important equipment that must be bought when Camping.

(5) furnace: The furnaces that are light and easy to use in the wild are mainly used in the wild.Such as small gas stoves, liquefied furnaces, and roasted alcohol furnaces.

(6) Cooking utensils: including barbecue stoves, lighters, knives, charcoal, alcohol, carbon clip, grilled fork, barbecue, barbecue net, food clip, oil brush, seasoning box, etc.

lighting lamp installation method of various lamps for various lamps installation precautions

lighting brand

The installation of lamps in home decoration should be detailed, because it must be used for a long time and cannot be easily damaged, otherwise it will affect family life.Let's take a look at how the lamps should be installed in home decoration.

1. Before installation, the lamps and its accessories should be complete, and there are no defects such as mechanical damage, deformation, paint peeling, and lampshade rupture.

2. According to the installation venue and use of the lamp, the minimum cross section of the wire core of each lamp should meet the requirements of the relevant regulations.

3. When installing electrical lighting devices in the masonry structure, embedded hooks, bolts, screws, expansion bolts, nylon plugs or plastic plugs should be used; wood wedges are strictly prohibited.When the design is irregular, the bearing capacity of the above fixed parts should be matched with the weight of the electrical lighting device.

4. In large risk and special dangerous places, when the height of the lamp is less than 2.4 meters from the ground, a lighting lamps with a rated voltage of 36 volts and below should be used or protective measures are taken.The lamps must not be installed directly on the flammable items; when the surface of the lamp is high -temperature parts*nearly flames, the heat insulation and heat dissipation measures should be taken.In the substation, the high -voltage, low -voltage power distribution equipment and the parent line should not be installed with lamps.The height of the Outdoor installation is not less than 3 meters away from the ground; when it is installed on the wall, the height from the ground should not be less than 2.5 meters.

The wiring requirements of the lamp snail mouth lamp head

1. The wiring should be connected to the terminal of the center contact, and the neutral line should be connected to the terminal of the thread.

2. The insulation shell of the lamp head should not be damaged and leaked.

3. For the light head of the switch, the switching handle should not have a naked metal part.

For ceiling lamps equipped with incandescent bulbs, the light bulbs should not be close to the lampshade; when the distance between the bulb and the insulation platform is less than 5 mm, the heat insulation measures should be taken between the Light bulb and the insulation platform.

The installation requirements of the lamp

1. When the steel pipe is used as a lamp, the inside of the steel pipe should not be less than 10 mm; the thickness of the wall of the steel pipe should not be less than 1.5 mm.

2. The lamp lines of the chain lamp should not be tensile, and the light line should be compiled with the crane.

3. The ends of the soft lines of the soft line chandelier should be used as a protection buckle, and the core wires at both ends should be tin.

4. Lights installed in the same room or place, the heart line deviation should not be greater than 5 mm.

5. The fluorescent lamp and high -pressure mercury lamps and its accessories should be used for use, and the installation location should be convenient for inspection and maintenance.

6. The fixation of the lamp should be firmly available.The screws or bolts for each lamp should not be less than 2; when the diameter of the insulation platform is 75 mm and below, 1 bolt or screw can be used.

Special lighting requirements

Emergency lighting and evacuation instructions used in public places should have obvious signs.Public places without special personnel should be equipped with an automatic energy -saving switch.

Each lamp should be installed on the phase line.The wire of the street light is introduced from the airline, and a waterproof bend should be used at the entrance of the lamp.

36 installation requirements of lighting transformers below

1. There should be short -circuit protection on the side of the power supply. The rated current of the fuse should not be greater than the rated current of the transformer.

2. Any end or CITIC point on the shell, iron heart, and low -voltage side shall be grounded or zero.

lighting requirements fixed on the mobile structure

Its wire should be laid on the inside of the mobile architecture.During the mobile architecture activity, the wire should not be tensile and worn.

When the weight of the chandelier is greater than 3 kg, the embedded hook or bolt should be used; when the soft line chandeliers weigh more than 1 kg, a Hanging chain should be added.

installation requirements of metal halide lamps

1. The installation height of the lamp should be greater than 5 meters. The wire should be connected by the wiring column to the lamp, and the surface of the lamp shall not be available.

2. The lamp Tube must be used with a trigger and a current restricator.

3. A reflective lighting lamps installed on the ground should take protection measures.

installation requirements of decorative lamps embedded in the ceiling

1. The lamp should be fixed on the special framework. The wire should not be close to the lamp case, and there should be a balance in the light box. The frame of the lamp should be close to the ceiling surface.

2. The frame of the rectangular lamp should be parallel to the decoration of the ceiling surface, and its deviation should not be greater than 5 mm.

3. The open lamp lamps of the fluorescent lamp Tube should be arranged neatly, and the interval tablets of the metal or plastic should not be distorted.

The installation requirements of lanterns

The diameter of the diameter of the fixed lanterns shall not be less than the diameter of the lamps and the hook, and shall not be less than 6 mm.For large lanterns, the fixed and suspension device of the crane lamp should be performed by 1.25 times the weight of the lamp.

The glass hood of large lamps installed in large places should take measures to prevent splashing downwards according to design requirements.

installation requirements of neon Lights

1. The lamp Tube should be intact and no damage.

2. The lamp Tube should be fixed for the dedicated insulation bracket, and it must be firmly available.Specialized bracket can be controlled by glass.The minimum distance between the fixed lamp and the surface of the building and the structure should not be less than 20 mm.

3. The length of the lamp for the dedicated transformer for neon Lights shall not exceed the allowable load toxic.

4. The installation location of the neon lamp specialized transformer should be hidden and easy to repair, but it should not be installed in the ceiling, and it should not be touched by non -inspectors.When it is installed, the height should not be less than 3 meters; when it is less than 3 meters, protective measures should be taken; waterproof measures should be taken during Outdoor installation.

5. The secondary wires of neon lamp -specific transformers and the connection between the lamp between the pipes should be used.

6. The distance between the two wires of neon Lights and the surface of the building and structure should not be less than 20 mm.

The installation requirements of chandeliers

For ordinary Hanging wires, if the lighting weight is below 1 kg, it can be lifted directly with a soft guide line and more than 1 kg. If the Hanging chain is lifted, the soft wire should be in the iron chain to prevent the wire from being tensile.

When the soft wire chandelier is buckled in the suspension box and the lamp head.When a sip of the steel pipe as a lamp, the inner diameter of the steel pipe is generally not less than 10 mm.For those who weigh more than 3 kg of lamps, the connection with the ceiling must be hook or bolts that are embedded.Fixed hooks such as fixed steel cannot be less than 6 mm in diameter.

When a fixed large chandelier is hung with a dedicated twist, it should be done: the spiny wheel of the twisted car must have a available locking device; the tensile strength of the twisted steel wire rope should not be less than 10 times the weight of the lanterns.The installation of the lamp must be anti -shock.When the metal shell of the lamp must be grounded, the ground bolt should be connected to the ground network.

When the lamp uses the screw -mouth lamp head, the phase line should be connected to the top of the lamp head, and the screw mouth is connected to the screw.The garden light should be installed with a fuse.Install lamps must be burned.When a variety of lamps are in the flammable structure or installed in a wooden ceiling, fire prevention or heat insulation should be performed around the lamp.Boured tungsten lamps cannot be installed on wooden or other flammable materials.Install lamps to make itself line with the indoor building lines.The side of the rectangular lamp should be parallel to the decoration of the ceiling.When the lamp is installed symmetrically, its vertical and horizontal central axis should be on the same straight line.Multi -mounted opening lamp lamps.The arrangement of the lamp should be neatly arranged.

precautions for installation of lamps

First of all, the most basic requirement of lamp installation is to be firm.

When the bedside lamp, table lamp, mirror front lamp, floor lamp, Wall lamp, etc. are installed in the room, the height is less than 24m and below. The metal shell of the lamp should be reliable to ensure the safety of use.A ground wire should be added at the lamp box during the wiring.

When installing various types of lamps, the installation instructions should be installed according to the requirements of the lamp.In addition, the dark line in the ceiling or wall plate must be protected by flame retardant sleeves.When the lighting weight is greater than 3kg, it should be installed with embedded hooks or directly fixing the sling frame from the roof (the lamps cannot be installed with a Hanging top keel bracket).The wire application hose led to the light head box box is protected to the lamp to prevent the wire from being exposed to the flat top.

When the bathroom and the kitchen are equipped with short -feet lamp heads, the porcelain snail mouth is short.The wiring and phase line (switch line) of the threaded lamp head shall be connected to the central contact terminal, and the zero wire is connected to the threaded terminal.

The most important and basic and most basic in the installation process: the lamp head with switching and other switches. For safety, the opening handle should not have a naked metal part.

maintenance of lamps

lighting must be used at the scheduled voltage and frequency.

All ground lamps must be checked frequently.

Special restrictions and specified lamps are generally used when the ambient temperature is 5-35 C.

The lamps used indoors cannot be moved outdoors.

Electrical, gas, kerosene stoves and other heater or their components or places directly encounter steam should not be used.The lamp cannot exceed the specified lamp.When changing the Lights and disassembling the cover and the fuse, the power must be cut off.

Safety lighting lamps should be checked to ensure that no abnormalities occur.

The accident lamps cannot be used after the Lights are urgently turned on at high temperature gas (140 degrees Celsius), and new lamps should be replaced.

Do not place paper and cloth such as near the Lights or cover the lighting.

There must be no places to repair lamps with dangerous objects such as gas and steam, but should be carried out in general places; when not in progress, safe operation must be guaranteed.

Wipe the lamps with warm water scrubbing or worting soapy water. Do not scrub with gasoline and volatile oil.

The metal part of the lamp cannot be used at will.

The dust behind the lamp should be cleaned with a dry cloth or dumplings.

When abnormal conditions occur during the use of lamps, use it to stop using, cut off the power, and check.

Factors of Villa Garden Water Scenery design Factors

1. Consider space

It is very important for the consideration of space. In the design of the villa garden water scene design, you should choose a suitable water scene location to start. You need to consider the scope of the use of space. We may have practical constraints and the interaction of villa garden design.Large or narrow your selection range. At this time, you should choose in the characteristics of still water and liquid water. Before the beginning, how to manage this function and overall cost, these are what you need to consider.

2. Considering the function and size of the water view

Before the design of the villa garden water scenery, we need to consider the function of water scenery. Do you want it as a mirror pool?Or the "small waterfall" that is harmonious with the style of the villa garden still wants to be a large villa swimming pool. Your lifestyle, daily activities and taste will play a very important role in the choice of water scene function. If you want your villaThe design of the garden is more elegant, you can recommend you to design a small mini waterfall.

3. The consideration of atmosphere and lighting

The design of the villa water scenery must not only consider the water view itself, but also need to consider things other than the water, such as the surrounding Lights and the landscape atmosphere you want to create.The vibrant water scenery style needs to be considered according to your hobbies and the conditions of your own area.

Villa Garden Water Scenery design Form

1. Squatting, small flowing water

Squatting is a common landscape sketch in Japanese -style gardens. It is used for washing props before the formal rituals such as tea ceremony. It is usually made of stone and placed with bamboo spoons and water canal provided on the top.From small flowing water to flower mirrors, every corner is full of life.

2. Water embolism

Use pillow wood or red brick, log, granite and other materials to make a pillar shape, embed the tap water pipe inside, install a faucet in the water out of the water, and set a water storage and drainage pool at the bottom of the water.Essence

3. Fountain, stacking water, falling water

The Fountains have different forms of different forms, and the beauty brings different. The sound of water, the trickle, and the tranquility of the water surface brings the sound and dynamic of nature to the garden.The overlapping and layered treatment of water stacking water, allowing the water layer to flow continuously, or flowing out of steps, forming a high and low landscape, thereby breaking the monotonous of the sight.Falling water is a regular falling landscape, which is mostly combined with architecture, scenery walls, retaining walls, etc., with the beauty of form and craftsmanship.

4.

Natural pools can be embellished in various forms, small trails, flower beds, plants, altar tank sketches, etc., which are generally mixed with other scenery around it.The regular pool must be harmonious with the symmetrical terrain around the surrounding area. It can also be built in a cool place to plant neat and pleasant background plants to highlight the landscape effect of the Fountain.

5. Natural refutation of shore fish pond

The water surface is attached, and the edge of the soil, stones and plants is full of natural wild fun, creating a state of twists and turns on the shoreline and undulating shore slopes.To some extent, the landscape is rigid and rigid, making it natural and realizing biodiversity.

Villa Garden Water View Creative design Method

Villa Garden Water Scenic design Creative 1: Create a formal elegance with a large pool

Choosing a good position is crucial to success. Whether it is visually or actually: an open, sunny venue is much better than a place covered by trees.Structure -usually concrete block walls and concrete bases.

Villa Garden Water Scenic design Creative 2: Build a raised water view pool for easy maintenance

A rectangular, Square or circular pool rises from the ground. There is a wide enough Hanging edge that can sit up to form a cute villa garden characteristics, which is not only eye -catching and practical.Because there are no plants that need to be taken around, the maintenance is very simple.

Villa Garden Water Scenic design Creative III: Enjoy a tranquility in the stream

The slow flowing "stream" is included in a narrow river channel, which is a traditional method of design of villa garden design.They can integrate into smaller spaces well, combined with growing and restrained plants, which can bring people a gentle and soothing feeling.

Villa Garden Water Scenic design Creative Four: Use water to transform a small space

Fountains, pools, or water falling waterfalls will add soothing water sounds to the garden garden and inhibit noise.If possible, place a small water view near the window so that you can enjoy it indoors.

Villa Garden Water Scenery design Pay attention to

1. Pay attention to the position of the pool.It should be determined in the direction of the house to dig the pool in which position it should be, and then determine what form and shape to excavate.

2. Pay attention to the pool behind the house.Since ancient times, the Chinese have liked to choose a house with the environment of the mountains. If "water" runs counter to the basic pattern behind the house, it will make people feel a sense of unsafe.Therefore, in the arrangement of "water", we must pay more attention to details.If a pool is set up in the front of the house, it is not advisable to dig deep underground, but the high pool wall should be built on the ground to build a pool.

3. Pay attention to the distance between the pool and the house.Don't be too close to the house, otherwise, the sun is easy to reflect the ceiling in the house, which makes people feel dizzy.

design requirements for the aisle corridors

1. Light:The bright light can make the space look spacious and alleviate the tension generated by the narrow aisle.Multiple reference Lights, fire Lights, and Wall lights are commonly used in the aisle to create a light environment.

2, illuminance:In the home environment, the main role of the aisle is to assume the family's transportation, handling furniture or items. Therefore, the aisle requires a high degree of illumination to provide sufficient brightness.It is recommended that everyone provide a main lamp, or a main light and several co -lamps to ensure the illumination according to the depth and width of the aisle.

3. color temperature:The family environment is more suitable for people to feel warm and comfortable. For example, the warm color of the incandescent lamp is more suitable for providing lighting for the family environment.Therefore, as a frequent family aisle, it is not possible to use cold -colored Lights to provide lighting. It is best to choose warm -colored Lights that are uniform or close to other space -colored temperatures for lighting.

4, decorative:The choice of the aisle lighting requires the appearance of concise and bright appearance, elegant shape, to avoid using too complicated and gorgeous lighting.In the actual settings, it is recommended to set a main lamp at the center point of the aisle, and then use the special structure of the aisle to cooperate with the corresponding decorative lamps such as the corresponding shooting Lights, downlights, and Wall lights to achieve good decorative effects.

Act lamp effect diagram

What is good to use in the aisle corridor

1. Flat lamp

Press the structure of the structure beam on the corridor.This method is most commonly used in engineering design.It is suitable for dormitories, apartments and other residential buildings, industrial, teaching, office spaces, and scientific research buildings in the stairs or corridors, especially on the corridor.The ceiling lamp is equipped with a dust -proof cushion ring, which has good sealing performance. It can avoid small flyworms enter the lampshade, suitable for places with more wind and mosquito in the outer corridor.This lighting method is not high, but the cost is low.For these types of lamps produced by regular manufacturers, the materials selected by the lampshade are good, and the light is soft, the light is soft, the color is not easy to change, and the lamps are more efficient to achieve better results.Try to choose high -quality products when designing.This laying light method can use the point illumination calculation algorithm to calculate the illuminance value.

2. Dibl

Use embedded down lights.This method is suitable for living buildings or hotels, hotels or other recreational venues with ceiling dormitory, apartments and other corridors and staircases.The light source of the embedded trap generally uses a warm -colored small -power energy -saving lamps to create a warm, peaceful or romantic atmosphere in order to coordinate with the overall function of the building.Because the depth and width and width of the downlight cup are different, the pour Lights are divided into vertical downlights and horizontal downlights. Each form has a variety of styles, with different light curves.Lights.When the design is selected, pay attention to the high ratio of the lamps to avoid uneven illumination on the corridor and obvious light spots.Due to the height of the ceiling 2.5M For example, in general, the spacing of the cloth lamp in the middle of the light is 1.75 ~ 2.5M , The spacing of the lamp with a narrow light -type lamp is 1.25 ~ 1.75m EssenceThis cloth light method can use the point illumination algorithm calculation of the illumination value.

Act lamp effect diagram

3. Box -type fluorescent lamp

Use a box -type fluorescent lamp to suck the top installation or grille -type fluorescent light to embed it evenly.The degree of illness in this method is high, and it is suitable for the inner corridor of office, scientific research, and teaching buildings (( The outer corridor should adopt a closed dust -proof type Cure , To create a bright and efficient lighting environment.The use coefficient method can easily calculate the average illumination of the corridor and the stairwell.

4. Shooting Lights

The shooting light is a typical lamp and a fixed -scale lamp. If a row of small shooting Lights is combined, the light can change the wonderful pattern, which can be placed around the ceiling or the upper part of the furniture.In the skirting.

At present, the quality of the spotlights on the market is uneven, and it is difficult to distinguish the quality of the naked eye. Therefore, it is best to choose a brand product to buy a shooting light and choose a high -quality transformer with each other.

5. Wall lamp

The Wall lamp is generally equipped with a glass cover. The reflection light of the wall can make the light softer, and it has multiple effects of projection and blooming light. It shows different appearances due to the different residential materials.

The decorative effect of the Wall lamp is generally more obvious than the lighting, so when choosing, first look at the effect it is installed on the wall before deciding.When choosing a Wall lamp, pay attention to a few points. First, choose a protective cover, and the second is to pay attention to the quality of the lampshade and bracket.

6. Lantern wall design

There is also a common method of the aisle lighting design, that is, the light curtain wall. The so -called light curtain wall refers to the use of an embedded Light belt or led The installation of the curtain wall makes the entire wall surface or ceiling of the home show uniform lighting color, making the home show more warm and comfortable. However, this light design requires the overall lighting and design requirements of the home furnishings, and it is best to match each other.

Outer corridor lamp selection

For the outer corridor, it is generally outdoor lamps in the courtyard or Park.What types of wall lamps to be installed depends on what kind of decoration style of your corridor is. Generally, many of the outer corridors are mostly Chinese, so you can choose Chinese antique Outdoor wall lamps or European Outdoor wall lamps.There are more copper colors.

Inner corridor lamp selection

The inner corridor is generally set at home, so you can choose indoor Lights. Generally, it is commonly used. Small suction, ceiling lamps, wall lamps, etc. It depends on what light you like or the corridor design.Where is the design? If it is designed at the top, you must choose ceiling lights or ceiling lights, downlights, etc. If you are on the wall, you can choose a Wall lamp.

How to design home improvement aisle corridor Lights

1. Putting a mirror in the aisle, using the reflection effect will play a good penetrating effect and expand the horizons.

2. Placing a gorgeous retro crystal chandelier at the top of the aisle, making light, is a good choice.

3. The design of the wooden wall skirt is beautiful and practical. The exquisite shape and luster can set off the simple European style.

4. The walls on both sides of the aisle to create a photo wall or a family gallery are an effective way to avoid a single and add emotional atmosphere.

5. building a large storage cabinet hidden in the wall in the aisle is the most effective use of space.

6. Install the decorative Lights under the aisle floor, and at the same time, you can also fill beautiful small things, such as flowers, pebbles, etc., which will be pleasing to the eye.

Feng Shui influence of Hanging clock

Use the Hanging clock to rotate to bring "vitality":Modern Feng Shui believes that the swing and sounding of clocks can boost the energy in the family, and the clock with the rhythm of the rhythm will give the family's life, bring more laws and sense of rhythm.The bell is moving, the meaning of rotation, and the function of going to the old and welcoming the new.

Use the Hanging clock to urge wealth:The slender pointer of the Hanging clock, the 12 directions divided evenly, simply look like a compass on Feng Shui.You can put the clock in a auspicious position, such as the financial position, the clock can be placed in the financial position to urge the wealth and the icing on the cake.

Use the Hanging clock to "Huasha":According to the theory of Feng Shui, the clock has the effect of turning on the Feng Shui. This role is similar to the "Feng Shui Wheel". If there is a sharp or dirty object outside the house, it is a threat that you need to try to eliminate it.The specific method is to hang a clock on the wall of the door and window, facing the doors and windows, it can be auspicious.

Furnishing clocks in the home placed Feng Shui

The number of Hanging clocks should be avoided:There is only one main clock in the living room, and the Hanging clock in the rest should not exceed one.If there are many Zhong Tai in the house, the peace of the house will be uncertain, and the people in the house often have repeated troubles.

The shape of the bell should be avoided:The bells in the house should be Square and circular to avoid triangle, hexagonal or octagonal, etc. These shapes of the bells will cause the house in the house.Only round and Square clocks are the most peaceful.

There should be no sound:The Hanging clock in the bedroom is best not to have sounds, otherwise the dripping sound of the bell in the middle of the night will make people even more uncomfortable.

The size of the bell should be avoided:The small house should not be placed with a big stupid bell. On the one hand, the noise seizes the master, and on the other hand, the bell is also a sound of the bell, which will make people feel fearful, restless, restless and less separated.

home House Placement

Most of the Hanging clocks are placed in the living room. The living room is an important activity space for family members. The placement of the Hanging clock naturally affects the Feng Shui of the living room. So, have your living room Hanging clock Hanging to the place?

The orientation of the living room should be avoided:Hanging bells should be placed or Hanging in the house (that is, the south), because Suzaku is ahead, and the front is a movement.The West and the north should be quiet and should not be placed.

The bell should be facing the doors and windows and balconies:The front of the clock cannot be inward, and the direction of the door or balcony should be better.Because when there is no one indoor, the air is still, and the swing of the bell can move the indoor gas to move and make the room full of vitality.

Placement of Hanging clocks cannot be right to the door:Although the Hanging clock should be facing the door, the Hanging clock cannot be hung in the middle of the hall of the door. Because of the homophonic "clock" and "end".The side of the door is auspicious.

Do not face the bell or gossip:Pay attention to the placement of the bell, try not to do things similar to gossip towards any clock, otherwise it will have a suppression effect on the home owner inside the house.

The Hanging clock should not be above the sofa of the living room:The clock should not be hung above the living room sofa.Otherwise, people who often sit here are prone to restlessness and even physical discomfort.

You can't hang the bed to the bed:Because from the perspective of metaphysics, it affects people's luck and sleep, you think about the old saying: the end of the life (the meaning of the bell: the end, the sleeping meaning: the bed), you struggle on the death line every night, which is very bad.

Try to leave the bed as far as possible:Try to stay away from bed, especially the head.Generally speaking, it is ideal to put the Hanging clock 3 meters away from the head.Because if it is too close to people, it is easy to affect people's rest, and no matter how good the Feng Shui is.

The Hanging clock generally does not face the door in the bedroom:Different from the living room, the Hanging clock in the bedroom cannot face any pair of doors, unless there is evil outside the door, this is a taboo.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Do not feudal superstition, eliminate Chen rules and bad habits, and establish a scientific, civilized and healthy lifestyle.Apply to delete & gt; & gt;Correction & gt; & gt;