1. How to washjacket

1. Do not use the washing machine to wash it with your hands, otherwise the waterproof layer will be separated from the base cloth under the strong pressure of the washing machine;

2. Using a neutral cleaner, it is best to brush the surface. The water temperature does not exceed 40 degrees;

3. Brush the dirty part with soft hair;

4. Rinse a lot of water, be sure to remove the washing ingredients, otherwise the cleaning agent will react with the color of the fabric after a long time;

5. Don't screw your clothes, don't use a dried machine, hang it out with a hanger directly, and dry it naturally;

6. Do not iron at high temperature, try to avoid ironing;

8. Each washing will have certain damage to the clothing, please avoid frequent washing.

2. cleaning fast -drying pants

1. Cold water machine washing, Gapita laundry powder, choose normal laundry dehydration procedures;

2. Do not dry clean and dry cleaning machine;

3. Do not use hot water or soak;

4. Do not use bleach water and soft agent;

5. If you want to get the best results, you can reverse and clean your clothes;

6. Due to the thin fiber structure, fast -drying materials are normal.

7, with products with ironing or iron, establish reversal and independent cleaning;

8. Mosquito prevention and ultraviolet line series will reduce after about 20 times.

3. Washing of fleece jackets

1. Soak with cold washing essence for 3 minutes (not soaked for too long, otherwise it will destroy the color of the clothing), rinse with water after washing with large towels to dry the water, and then let it be dry;

2. After the water is rinsed, you can also fold it and put it in the laundry bag to dehydrate, and then let it be placed.

3. If you use soft essence, you must not drip directly on the clothing. You should dilute the softness with water first, and then put it in it;

4. It should not be washed with the towel, otherwise the dander will stick to the clothes;

5. Please be sure to follow the washing indicator to indicate the laundry. Please do not wash the dry cleaning clothing.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. How much is a jumpsuit in the north

The prices of jackets in the north are mainly about 2000-3000 yuan. Different styles and model prices are also different. There are slightly low prices, some performance and design are relatively high-end, and the price is higher than some ordinary styles.

At the beginning, the back was a rigorous and professional Outdoor brand. The brand name originated from the giant northern slope in the mountains, and the logo was designed based on a mountain peak of the United States.Therefore, the sub -jacket performance and design in the north are important factor that is loved by everyone. The jacket in the north is generally used to use quick -drying fabrics, windproof, waterproof, oil and pollution, anti -wind and warmth, and take care of them everyday.Keep a warm jacket.

2. What series of jackets in the north side

There are four series in the jacket in the north, which are the same as the positioning and functions of all series of Outdoor brands.The specifics are as follows:

1. Purple standard series

The purple standard series is a straight line designed with Japanese designer Nanamica in 2003. This series is only available in Japan. The design is all responsible for the Japanese side. Therefore, the design style of this series is very different from other series.It will make people think that this is the same brand product.

2. White standard series

This series is a Korean branch line launched in 2004. It is similar to purple standards. Compared with other series, the white standard charge series is more like a fashion fashion brand.

3. Red label series

The red label charge series is a new series launched in 2016. It is the European branch line that was established in the north. It has not yet determined a specific style of this series.The design and luxury high -end route, after all, the high -end product series in the north and other Outdoor brands are relatively weak.

4. Black label series

This series was derived from the purple standard series. It was originally born in Urban Explration. Later, it was divided into a series separately because it was very popular.

[Character fabric] What kind of assault clothing fabric?

Which fabric is good?

Choose the charge fabric

Everyone knows that good charge fabrics can not only reflect the overall design and novel styles, but also fully consider the external environment and occasions wearing.Let s teach you the 5 techniques of the screening and purchase of the fabrics of the jacket:

1. Because the jacket must be completely waterproof, the seam must be used to prevent the pins from leaking with hot pressure strips. Carefully see if the rubber bar in the clothes is flat and whether there is a bubble.The seams of the car are all crushed with waterproof rubber strips, ensuring excellent waterproof characteristics.

2. Whether the hem of the clothes has a windproof skirt or not, if there is no windproof skirt, you can tighten the clothes, and the drawing rope at the hem to prevent the snow from being poured into the body from the hem in a harsh environment.

3. Whether there is a breathable zipper under the armpit of the clothes.Not all assault jackets will have this design. There are ventilated zippers under the armpits, which is very useful in harsh environments or in large amounts of exercise.

4. Whether the tightening method of the cuffs is appropriate?The magic sticker design at the cuffs can be adjusted and loose at will according to different body types.

5. Whether the hat can cover the wind and rain well, whether the activity of the back head is free.If you use activities such as ice climbing and snow mountain climbing, you must also consider the activities after wearing a helmet.It is fully considered that the comfort of the wearer and the convenience during exercise can be removed from the three -dimensional design of the unloading hat and have multiple adjustable functions.

Selection and use of fabrics during the production process -physical properties.

1. Strong scrape: It can produce a stable modeling effect. The stiff fabric has a physical expansion, and it has no extra pleats and accumulation to make clothes. The design of A and H in the design is the most appropriate.To judge the stiffness of the fabric, you can simply put a small piece of fabric on the edge of the table to let it hang down naturally. The jacket made of the fabric in the red line will be more stylish

2. Feeling: It is comfortable to feel. It is not recommended to be too hard and too astringent. Especially the products sold in the mall, the customer's taste of customers consume is high.In terms of feel, nylon fabrics are better than polyester fabrics.Everyone's feel is different. The training feel is to touch more, touch the fabric of the famous factory, and touch the fabric of the first -line charge brand.

3. Anti -wrinkle: Punching sleeves and backs are frequent with tables and chairs, and the fabric is required to have high anti -wrinkle resistance.Rub the fabric samples hard, and then Smooth it. Look at the degree of wrinkles disappearing. The fabrics without wrinkles or a small amount of wrinkles have good anti -wrinkles.In addition, listen to the sound when rubbing, do not have rustling fabrics, because when wearing the clothes made by the fabric, you can hear you from 10 meters away.

4. The relationship between yarn and density: Now the punching clothes are pursuing lightweight, and the fabrics with thin, gauze chips, and high density are required;Wrinkles; good fabrics are mechanical indicators such as the feel, stiffness and anti -wrinkle resistance of the fabric by increasing the number of F numbers as much as possible, appropriately increased the twist, and increase the density.Therefore, when picking the fabric, you must go to the F number and twist data as much as possible.(F is the number of single gauze roots. The larger the single veil, the finer, the better the flexibility of the yarn, the better the feel will feel)

5. Organization/pattern/flower color: Chunya Textiles, Tatson, polyester tower, grid, and diagonal lines are commonly used classic fabrics, flat but enduring; pay attention to use small bistanic fabrics, and make good designs with good taste.Teacher to choose, people have their own good, tastes not representing the candidates of the public, they are easy to fall into the custom, and they will be reduced to street goods by accident.With buds, novel things can be available to attract consumers' attention, but to control the proportion appropriately, Jobs's realm is simplicity.

6. Thick thin: thin spring and summer, thick autumn and winter; don't affect the effect of glue pressure, thickness cannot make the clothes too bulky; the number of scrapers of the waterproof coating has a lot of impact on the thickness of the fabrics;Essence

7. elasticity: Properly use elastic fabrics on the back of the elbow, which can be a gimmick of ergonomics in the whole point, but if you use elastic fabrics for whole clothes, it depends on whether you can sell it.), Especially the fabric with spandex; the mechanical bullet is easy to collapse after washing; the elastic modulus should not be too small (the minimum power of the deformation of the fabric), otherwise it is easy to wrinkle when pressing the glue;Below temperature water

8. color saturation: It is relatively fresh and positive. In contrast, there will be a feeling of bright eyes.The saturation is very related to the hardness of dyes and water quality. Clariant's dye and auxiliary performance is very good. It is specified for some first -line varieties. South Korea and Taiwan's water quality helps color saturation (industry legend).color has great influence on attracting customers into the store and purchasing.If the clothing is combined, pay attention to the water -washing and sticky color of the first and second colors. The polyester materials are easy to stick to each other.

The production process of the jacket

1. Types of coating and film: The feel of the finished fabric is basically a film & gt; wet coating & gt;However, it is not environmentally friendly; 2.5L and 3L fabrics are currently from famous factories, otherwise it is easy to produce quality problems, and the rubber strip is responsible for matching the fabric factory.The problem of water washing rate in the middle and noodles caused the fabric to wrinkle; which test method must be specified in waterproof and breathable parameters, and it is strictly tested. In addition, it is best to do aging testing. Many new domestic in China have a lot of new domestic tests.The imitation coating has cracked turtle after washing the water many times, and the functions are lost.

2. ingredients: Tear and feel nylon are better than polyester. There is a good factory polyester fabric; recently, there are leisure brands with waterproof and breathable trench coats with all cotton tables;Sticky color.

3. The thickness of the yarn branch: In the case of the unchanged D also, the number of F numbers is required to increase the furniture of the fabrics, such as the same thickness wire rope, which will definitely be soft in the fine steel wire inside.

4. After finishing: The surface cloth is easy to dip the dust (especially the black); the natural luster of the chemical fiber is very low, and it should be treated as much as possible;Affect water washing rate, etc.

1. What are the ways to identify the authenticity and false jacket in the north

1. Tag

The tags on the north of the authentic jacket are usually not directly priced, but in other ways.If the price is directly on the tag, it is likely to be a fake.In addition, the origin information on the tag is also an important indicator. The original origin information of genuine products is usually very detailed, while fake goods may be blurred or missing.

2. Leading bidding

There are usually brand marks on the collar of the jacket in the north. The embroidery workers of the authentic bidding are fine and the handwriting is clear, and the problem of rough embroidery workers and blurred traces may occur.

3. Embroidery

The embroidery of the jacket in the north is also an important identification point.The authentic embroidery technology is fine and the lines are Smooth, while fake goods may occur without Smooth lines and embroidery misplaced.

4. Details

There are also a lot of emphasis on the details in the north, such as zippers, magic stickers, cuffs, etc.These details of the genuine products are usually well processed, while the fake goods may occur, the zipper is not Smooth, the magic stickers are insufficient, and the cuffs are inaccurate.

5. waterproof performance

The jumpsuit in the north is famous for its excellent waterproof performance, so waterproof performance is also an important indicator of identifying authenticity.You can pour water on the assault jacket to observe whether it can quickly slip and keep the internal dryness.Genuine generally has good waterproof performance, while fake goods may not achieve this effect.

2. How to check the authenticity and false jacket in the north

1. Washing standard heating method

This method has a high success rate, and it is suitable for the north of the jacket products with a washing label.The water washing the water in the north side of the genuine product is pale pink. After baking heat with heat sources such as lighters, it will see gray and white.After cooling, the color of the water washed back to restore light pink.

2. Hocular interest laser prevention and pseudo -standard identification method

After 2010, all the jackets in the north replaced the small red standard as the new anti -counterfeiting standard. The cost of fake falsification for new anti -fake standards is extremely high, so this method is also more effective.Northern assault clothing product Daquan & gt; & gt;

the north

Huafu Clothing (China) Co., Ltd.

• Place of Origin: United States
• Registered capital: 7 million yuan

The North Face is founded in 1966. It is an important member of the VF Group of the US listed company. It is headquartered in a energy -saving and environmentally friendly industrial Park that obtains LEED Platinum -level certification in California.Adventure provides professional equipment.As a global leader in outdoor sports today, The North Face is to help the world explore and challenge human potential with products that have been tested and explored by athletes and meets the needs of various Outdoor needs.At the same time, the brand is always committed to protecting the Outdoor environment, and the impact of humanity on the natural environment has been reduced to lower through various sustainable development projects.More& gt;

What does one or three -in -one jacket mean

When buying a jacket, you will see that some punches are three -in -one jacket, so what is a three -in -one jumpsuit?What are the three -in -one jacket?

The three -in -one ingredients, also known as 2 sets of punching clothes. The so -called three -in -one is the meaning of three -in -one jacket, warm clothes, and leisure sportswear. It usually has two layers. The first floor is the outermost jacket.The other layer is the inner tendon inside. Among them, the inner tendon can be removed or packed at any time. It can be worn as a charge, you can wear it as a warm clothes, and the effect of a casual sportswear.

Second, the jumpsuit plus velvet is better or three -in -one

Sanheye jacket is a jacket with inner linery jacket. The warmth effect is better. Compared with single -layer but velvet jackets, each has its own benefits. In principle, the Sanhe -One Penta jacket is better than a velvet jacket.

Compared with the pill jacket, the Sanheye Chong Jiao is more flexible. It can choose the corresponding dressing method in combination with different temperatures and wearing scenes, and the uses and functions will be more.The velvet is generally suitable for wearing in some specific scenarios, such as when the temperature is cold, but the three -in -one scene is obviously richer.

Of course, if the scene of wearing a rushing coat is relatively cold, or if you don't want to disassemble the inner bilots often, it is not impossible to choose a velvet jacket.

What is the degree of cold resistance to the three or three -in -one jacket

Theoretically, it can cope with at a temperature of minus 5 degrees, but it may be more difficult if the lower temperature may be, but as for the temperature of the cold resistance, it depends on its design.It is not impossible to wear more than ten degrees of temperature.