The correct way to maintain the life of the inflatable paddle board generally used for the maintenance of the inflatable paddle board
1. How long is the service life of inflatable Paddle boards?
According to the material, the Paddle board can be divided into inflatable Paddle boards and hard boards. The durability and stability of the hard board can be better. Generally, it can be used for 8-10 years. The service life of the inflatable Paddle board will be shorter.
Generally speaking, the normal service life of the inflatable Paddle board is about 3 to 5 years. If the maintenance and maintenance should be proper, it can be used for a longer time, but it should be noted that the inflatable Paddle board will have different specifications.When you choose to adapt to yourself, if you are not adapted, the inflatable Paddle board may be damaged quickly.
2. The correct way to maintain the maintenance of inflatable Paddle boards
If you want to make your inflatable Paddle board for a longer period of time, it is very important to do maintenance and maintenance. The maintenance of the inflatable Paddle board mainly pays attention to the following aspects:
1. cleaning of Paddle boards
(1) After use, please be sure to wash the Paddle board.When you gallop for a day, the mud, water plants and other debris in the river will be attached to the surface of the paddle plate. If it is not cleaned, it will be packaged, and these debris will destroy the texture of the surface of the Paddle board.
(2) If you like to fly in the sea, in addition to cleaning the surface of the Paddle board, you need to dry the Paddle board.If the inflatable Paddle board is stored, it is stored if it is not dried.
(3) Do not use any cleaner containing chemicals (even soap) when cleaning.Just sprinkle water with a hose to air dry.
2. storage of Paddle boards
(1) After using the Paddle board, remember to remove all the accessories to avoid scratching the board when packing the Paddle board; then you must rinse it with water and dry it.state.
(2) Although the design of the inflatable Paddle board is mainly to facilitate stored in the bag, people with a storage space (for example, in the garage) usually make it in part of the inflatable state.If you use the Paddle board more frequently, you don't want to air the air every time.It is recommended that you release a small amount of gas to the temperature of the place where the memory is stored is too high, and the side sealing of the side of the board to destroy the board will cause air leakage.
(3) Pay attention to the location of the Paddle board to avoid direct sunlight. Direct sunlight can cause natural heat expansion.This will cause pressure on the seams of the inflatable Paddle board, especially if the inflatable Paddle board is inflated to the maximum pressure value.All in all, when not in use, do not place your Paddle board under the scorching sun.Otherwise, the fierce sunlight will destroy the appearance of the board.
3. Repairing of Paddle boards
The damage to the Paddle board should be repaired in time. The damage to the inflatable paddle plate is generally common is the air leakage and the gum. The specific treatment method is as follows:
(1) Leakage
Charges the inflatable board to 7-10PSI and spray the soapy water that may leak air. If the air leaks, the area will be generated by bubbles.
Find the air leakage area, mark it, and completely deflate the Paddle board.Use beautiful gums or tape to cover the surroundings that are about to be repaired to prevent glue from overflowing.(Before repairing, wipe the surface of the air leaky place clean.)
Take out the PVC tablets in the repair cylinder, cut out a suitable shape, and apply the glue (evenly).
Press it to the place where the air is leaking.
Stay for 48 hours, wait for the glue to dry, tear off the tape.
(2) Open glue
charge the inflatable board to 7-10PSI, find the place where the glue is turned on, use the beautiful pattern or tape, and cover it to be repaired to prevent the glue from being scooped to other places.(Similar leakage, wipe the surface of the open platize before repairing.)
Squeeze out the glue, apply it evenly along the place where the glue is turned on, and then Smooth it.
Remake for 48 hours, wait for the glue to be completely dry, and tear off the beautiful pattern glue.(Similar leakage)