Articles in Categorys Raincoats

Introduction to waterproof fabric

waterproof fabric is a new type of textile fabric, which is made of polymer waterproof and breathable material (PTFE film) plus fabrics with fabrics.The main functions of waterproof and breathable fabrics are: waterproof, humidity, breathable, insulation, windproof, warmth.

In terms of production technology, the technical requirements of waterproof and breathable fabrics are much higher than ordinary waterproof fabrics.At the same time, the quality of the waterproof and breathable fabric also has the functional characteristics that other waterproof fabrics do not have.While strengthening the dense and water density of waterproof and breathable fabrics, its unique breathability can quickly discharge water vapor inside the structure, avoid the structure of the structure, and keep the human body always dry.The problems are a new type of fabric of healthy and environmentally friendly.

Real waterproof fabrics can also be able to withstand water seepage pressure in a humid climate and environment for a long time, and do not seep water.For example, walking outdoors for a long time, Kneeling or sitting on a humid ground, will not seep water.

How to wash waterproof clothes

All E-PTFE film clothing can be washed.There is no permanent waterproof performance loss after washing. The surface DWR dialing function is lost and it can be simply repaired.

1. The waterproof fabric is more resistant to dirt. Add some detergent in the water. After soaking for 10 minutes, use your hand for a few minutes.Just dry it.

2. The blue cloth stained with vulcanized fuel, the adhesion of the general color is relatively strong, but the abrasion resistance is poor.Therefore, it is best to soak in the detergent for 15 minutes, rub it gently with your hands, and then rinse with water.Don't rub it with a rubbing plate, so as not to be white.

3. The green cloth made of oxidized fuel is generally strong and shiny, but it is easy to green when it encounters gas such as gas.Therefore, don't put the washed green cloth clothes on the stove.

4. If waterproof jackets are waterproof fabrics with coatings, they generally do not need to be washed frequently. When it is not too dirty, scrubbing with a humid and humid towel.Wipe it a few times and twist the towel again, and then scrub it repeatedly.If the inside is also dirty, you can use hand -washing method to put it in the bathtub, more warm water, detergent or meals, and grab a lot of washing.Then completely overwhelm the foam water, and finally put it in the washing machine to dehydrate.

precautions for waterproof clothes washing

1. You need to pull your waterproof jackets, buckle buckles, stick magic stickers, and restore the wind rope on the stretching hat -otherwise it will cause the fabric to distort.

2. Do not add a softener -the soft agent may cause the gel barrier, the fit film, and the lining to get rid of it, and the clothes are scrapped. Even if it is not so serious, the production of bubbles is inevitable.

3. Do not use hot water and warm water -waterproof clothing is afraid of high temperature.

4. Usually the drum is better than the wave wheel, and the wear and tangling of clothing are less, but it is not necessary.

5. Do not dry it. The waterproof fabric lining has a quick drying nature, and it does not absorb a lot. It does not take any effort if it is Hanging to dry. Do nt harm it with strong centrifugal force.

6. If you cannot determine whether the washing fluid used contains a soft agent (mostly), use the material such as washing powder and washing agent to wash.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

Culture is the soul of an enterprise. In order to further promote the culture of Red Bean, on the afternoon of February 3, 2018, the 2018 Red Bean Cup "Corporate Culture Knowledge Competition" was held in the chain business school.This competition is among the functional lines, online sales lines, production bar lines, men's clothing lines, and group purchase line lines from Hongdou Co., Ltd..

The content of this competition is novel, and the innovation adopts the "points system" competition system. It is divided into four major Links: "concentric cooperation", "eye disease and hands", "a daughter -in -law", and "World War I to the End". The atmosphere of the competition was more active and enthusiastic.

After many fierce competitions, the final production line won the championship, and the men's clothing line and group purchase lines followed closely.

The Red Bean "Corporate Culture Knowledge Contest" mainly involves: the report of the 19th National Congress of the Communist Party of China, the party building of the corporate, corporate culture, and the "Modern Enterprise System with Chinese Characteristics" and other corporate culture knowledge, which provides a valuable understanding of the red Beans and red character for the majority of employees.Chance.

1. What kind of material is good for pants?

The water pants include rubber tire products, flat rubber products, glue products, and PVC materials. The cost performance of PVC is welcomed by many people.

1. Rubber tire products

In the early days, rubber tires were used as raw materials, and the current market use is very small.At present, some small workshops are produced, and they have basically withdrawn from the market.

2. Tablet rubber products

Tablet rubber products are the replacement products of the tire. It is better than car tires. It is less leak than the tire tire material, but it has obvious disadvantages, is not scratching, and is easy to get aging.High weight.The existing products include flat -textured and hemp linen products. Its half -body specifications are not as good as PVC and glue products in terms of performance. They have certain advantages in the whole body specifications.But anti -aging performance is generally as good as PVC products.

3. Hanging glue product

This type of product has greatly improved the aging performance and scratch resistance compared to tablet rubber products, but the weight is almost twice as much. It is suitable for industrial and mining venues, such as coal mines and quarry.Products, there is no full -body product.

4. PVC products

It is the material of the common sewage pants in the market. The addition ratio is high and has the following advantages:

(1) Do not aging or open (produced by high -poustone thermal combination process).

(2) wear -resistant, not easy to scrape, and easy to repair.

(3) Good acid -alkali, oil -proof, and elasticity.

(4) Light weight and comfortable wear.

(5) Stable product quality.

2. How to choose the material of the pants of the water

As a consumer, when choosing the material of the pants, the first thing to consider is cheap, the product is convenient to put on the work, and it is not bulky.

1. The weight of rubber and glue pants is far more important than the weight of PVC -made water pants.

2. The pants of PVC materials are light weight, comfortable and cheap, and easy to wear.

cycling

As a cyclist, I believe that when choosing riding clothing, the first thing to consider is whether it is good or not, whether it has a rainproof effect, and whether it has a reflective warning effect.General high -end fabric riding clothes have a certain waterproof function, which are divided into inner waterproof and outer waterproof.

Waterproofing outer layers is generally more expensive, because the fabrics of this cycling service must first ensure the protection function of the cycling accident, and secondly to ensure the ventilation problem in the cycling process, and the softness should also be soft.Some considerations, the price will naturally be high.The inner layer of waterproof is usually relatively comfortable, because the fabric can be softer.The outer material of this type of cycling only needs to bear the protection function, so it can open more airways.We found that most of the so -called four -seasons riding uniforms are dominated by double layers.At the same time, the waterproof layer also has a windproof effect.

Ride raincoat

After many old knights, especially Mo friends who have experienced a long travel experience.No matter how good the ride, it is not worth the Taobao -level riding raincoat.This is because the waterproof function of almost all riding uniforms is achieved by the use of rain and coating, and the coating is not necessarily good.In addition, the use of coatings will face the problem of coating consumption and fade.Therefore, like most Outdoor costumes, ride clothes should not be washed frequently.The reflective ride raincoat cannot be washed frequently, otherwise it will greatly destroy the anti -light strip and waterproof coating to a large extent.

So since ordinary cycling clothes are waterproof and do not use it, why do I have to buy riding Raincoats?Because general cycling clothes are mainly used for emergency and short -distance use.

There are a lot of one or two hundred yuan of ride Raincoats on the Internet.It is convenient to go to the toilet (it is said that the rainproof effect is slightly inferior to the conjoined).There are also Moshisa reactions. In long distances, no matter what kind of riding raincoat, it will leak water for too long.But when you see this, you give up to buy Raincoats. You can only persuade you to not wear it. It is quite scary!

Should I wear a ride or raincoat?

To sum up, it means that the weather is good and uses ordinary cycling clothes. Whether it is breathable or protective effects, it is a bar.If it is a rainy day, it is best to use a professional ride raincoat. The quality is slightly better.

In addition, it is important to color when choosing a raincoat, just like the raincoat worn by high -speed traffic police now.The price on the Internet is two hundred yuan up and down. Not only is the clothes itself colorful, but the area of reflective strips is also very powerful.Even when it is clear, wearing a riding reflective vest, whether it is during the day or at night, the fluorescent warning effect is excellent.Intersection

Finally, ride on rainy days, slow is the main theme.Of course, it is not necessary to ride on rainy days, and you can ride without ride.

What are the riding equipment

1. riding shoes

[mountain car lock shoes]

The manufacturing requirements of mountain cars are relatively simple and require convenient action, but based on the reasons, there are more targeted needs in design.Because of the more attention to riding skills and performance, it has a strong requirements for the protection of the foot, especially in the design structure. This highway vehicle requirement is not very high.

1shoes

When you choose your shoes, you still have to glance at the price card first.The general quality of cheap shoes is relatively low, so the feet feel is not very good.If the foot supports this is important to you, then you can look at the insole.Cheap shoes are thick.

A little more high -end, even if it is only a little better shoes, there will be more shoe types instead of replacing the thickness of the insole.High -end shoes will be more fit, and it can also extend the service life and increase comfort.

2Foot material

The locks of some mountain cars are plastic or synthetic plastic, while some are made of carbon fiber.Based on the use environment of mountain cars, the road surface is relatively uneven, or multi -stones, so the selection of mountain -locking shoes is worth exploring.

It's like there is a saying,"If you don't try it, you will never know what the carbon fiber is different." If you never try the lock shoes made of carbon fiber, you will never know what it feels like.The moment you put on it, you will have a very intuitive feeling. When you step on, you will be more direct, and the carbon itself is lighter, so your feet are great. You will feel that the money you spend is worth it.

3, Magic Patch and Fanking

Regarding this, what style of lock shoes you choose, what you should consider most may be that it should be fixed on your feet, because the lock shoes of the mountain cart are often exposed to a sandy, dirty, and humid environment.All these factors will weaken the fixed effect of magic stickers.

Ordinary magic -lock shoes will have a fine -minded buckle on the ankle.Because this kind of shoe is mainly fixed by fixing the shoes by the one closest to the ankle, it is the greatest.At this time, the effect of fine -t -destruction is better, because in addition to fixed, it can also effectively avoid the soil and small sand grains into the shoes, and it is easier to unlock it when it encounters a crash.

4, Flat -step conversion set

Many people will remove the flat -step converting set when they get the new mountain lock shoes.But please keep it, because they can increase the contact area.Because when riding uphill, the focus is basically on the forefoot, that is, the position of the flat -trap converting set.

5, shoes material

Many high -end mountain -lock shoes are still leather materials.But when choosing shoes, it is best to avoid this material.Because wearing it is like wearing gloves, it feels greatElasticBut it is best to leave the budget to the highway lock shoes. After all, the road to riding a road car is better, and it is not easy to damage the shoes.

Highway Lock shoes

Although highway lock shoes and mountains lock shoes have common characteristicsAlble, comfortable, low wind resistance, but mountain -lock shoes still have some design priorities.All highway lock shoes support different types of locking types. Therefore, when lock shoes and locks are matched, you should pay attention to selecting the correct locking brand and lock type type.

1shoes

This is similar to the mountain lock shoes, but the highway will be more advancedEssenceSome brands of highway lock shoes will provide heat plastic!Because once you get on the highway and put on the shoe, it is basically a few hours, and the position of the feet will generally not change much.

riding mountains is not the same, because you may often change back and forth between standing or floating positions due to different road conditions. Highway lock shoes need to keep a posture for a long time, maintaining a fixed position for a long time, so you do nt move in a fixed position.The requirements are relatively high.Because you can fine -tune its shape, it doesn't matter if you don't get used to it when you wear a shoe for the first time, because it can be adjusted.

2Foot material

Compared with mountain lock shoes, due to the needs of highway cycling, highway lock shoes are more rigid.After all, it is necessary to match the rigid wheels and frames, is it still wearing casual sports shoes?If you want to have a better cycling performance on a road car, then we strongly recommend that you wear carbon -bottomed shoes with at least entry -level carbon -bottomed shoes.They are not much more expensive than plastic, but you deserve that money.

3How many magic stickers?

Compared to mountain lock shoes, there are more magic stickers in highway locks.For example, Tie San's shoes are easily mistaken for highway lock shoes. Tie San's shoes usually have only a very large magic sticker.There are only two magic stickers in high -quality highways, but if you ride in the rain or in a muddy environment, the viscosity of the magic sticker will deteriorate.Therefore, we recommend that the road lock shoes you buy is best to have two magic stickers, plus a fine -tuning knob.

Note: There are two types of fine -taught buckles, one is a sawtooth strip, and the other is a knob nylon rope. The two fine -tuning effects are much worse. Finic knobs are more advanced.

4, Breathable

The breathability of highway lock shoes is very important, so that when the weather is hot, the feet will be more comfortable.Therefore, when choosing highway lock shoes, be careful to see if there are breathable nets and breathable holes.

Tip: If you have a ventilation holes in your soles, you can stuff some tape into the hole in winter.This can prevent cold and moisture.

5.Can replace the heel

When we ride a road, we often encounter this situationIt wait for traffic Lights at the crossroads. At this time, we need to put one foot down and move slightly, so the heel will be easily worn. If the heel can be replaced, we will better protect the sole, but this is not a pair of pairsThe key to highway lock shoes is.

Second, riding protective gear

Including helmets, knee pads, elbows, back armor, chest armor, cycling gloves, etc.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

What is a traffic police reflective raincoat

The traffic police reflector raincoat is based on the existing raincoat structure. On the front and rear body and shoulder symmetrical parts or other parts, the safety symbol made of strong reflective materials is set.As a result, the raincoat can produce a dazzling reflex light under the irradiation of street lights or Lights and natural light to remind the vehicle alertness to achieve safety.When the rainy weather is not good, the traffic police reflecting raincoat play a role in traffic safety protection.

Traffic police reflective Raincoats have the characteristics of high safety factor, convenient and practical, good waterproof effect, comfortable and dry.

Traffic police reflective raincoat action principle

Because the traffic police reflective raincoat uses the structure of a reflective strip on the surface of the raincoat. When riding a bicycle in the rainy night, the Lights of the cars driving in all directions are on the reflective strip, reflecting the eye -catching light, reminding the driver of the car in time, and avoiding it. It can be avoided.Traffic accidents occur.

Traffic police raincoat washing

1. Traffic police reflective raincoat staincleaning method

a. The traffic police reflecting raincoat is washed and should not be soaked for a long time. It can be washed with a soft brush with a soft brush. It is most suitable to wash it with water.If you are contaminated with oil, you can apply a small amount of soap, laundry fluid, detergent, etc., and rinse it in time with water. Do not scrub with boiling water. Note that you should avoid scrubbing at the reflector.

b. Remember not to use acidic or alkaline solutions. Police waterproof protective clothing generally use neutral cleaning agents to clean.Because most of the police protective clothing uses a film Oxford cloth to prevent corrosion aging.

c. Police waterproof protective clothing is cleaned with neutral solution, then rinsed with a lot of water, and dried directly. Do not use the dehydrator to dry to prevent the exposure.

2. Traffic police reflective raincoatstorage method

a. When the reflective raincoat is wet, remember not to expose or heat and dry it in the sun, let alone dry it indoors. It should be placed in a cool and ventilated place to dry or dry.

b. When storing, it should be two meters away from the thermal source (steam duct stove, etc.) to prevent the aging and deterioration of heat, and be careful to avoid excessive folding reflux bars.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;