What Raincoats do motorcycle Cavaliers choose?

1. The model determines the type of raincoat

First of all, your own model, this is a big prerequisite.

Cross -bicycles and beam cars (less used in this model):The lower body (position below the thigh) is basically wet when it rains, and the shoes are basically humid.The editor suggested that the user group uses a split raincoat. After all, the split raincoat can surround the whole person to the maximum and it will not affect the control. It can also use integrated Raincoats and a pair of long waterproof cover.

Pedal model:The raincoat can be described as a natural versatile partner. After all, its design shape has a certain protection of the lower body. Unlike the legs of cycling and beam cars during cycling, the legs are almost exposed.The narrow and wide figure on the top of it, it is not easy to be blown by the wind after putting on the raincoat, so it is recommended to wear a simpler integrated raincoat.

2. What kind of fabric material and coating raincoat

It depends on the user's own choice. At present, the material of the raincoat is roughly divided into three categories. The materials are different and the price is different.Consumers can buy according to the actual situation:

Material with polyvinyl chloride (PVC): The jelly semi -transparent plastic raincoat often seen outside. This raincoat is low in price, but it is easy to damage.

Poly -polyester -wire spinning or distributed material: Another layer of PVC waterproof layer is applied in the inside of the cloth.

Material with waterproof and humidity cloth: Apply a layer of waterproof and humid coatings in the inner side of the fabric, such as Raincoats commonly used by police and climbers. Its waterproof and humid layer has 1 billion micropores per Square Square.Gas molecules are passed, but large water molecules cannot be passed. Therefore, the waterproof and breathable effect can be achieved. The disadvantage of waterproof and humidity is that the price is more expensive.

3. Look at the size

Most of the raincoat packaging will have a comparison table that chooses the raincoat size by height, but because the Raincoats manufactured by the raincoat manufacturers on the market are different in size, it is not recommended to buy different brands directly to buy different brands.The raincoat is prone to errors.

4, try on

It is best to try it on Raincoats, but usually the Raincoats in the mall cannot be tried. It is recommended that people who wear M numbers of clothes to buy Relcoat L. In this way, it will be better. Even if you wear more clothes in winter, you can use it.

Where to put a motorcycle raincoat

1. Can be placed in a box at the tail of the motorcycle or in the storage box under the cushion.

2. If there is no tail box, you can be tied to the tail of the motorcycle.But avoid being taken away ~

3. You can put it at home and look at the weather forecast before going out. If it rains, bring Raincoats or choose other transportation methods.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[Source of raincoat] The historical raincoat of raincoat is due to a "mistake" of workers

The raincoat on rainy days, plus its strong wrapping silhouette, plays an important role in shaping the character image. Remember to have a Chekhov's "People Put in the Set" in High school. The character is lonely. Burchov, who is timid and fearful, is "abiding by the law", is that it always takes umbrellas, raings, and Raincoats in the sunny day. Essence

Although the raincoat made of rubber is not permeable, it is hard and crispy. It is neither beautiful nor comfortable to wear on the body. British metallurgist Parker decided to improve this kind of clothes. Use carbonide to do solvents, dissolve rubber, make waterproofing technology, and apply for patent rights, and sell it to a person named Charles, and the raincoat starts to produce a lot.

After entering the 20th century, with the emergence of plastic and various waterproof fabrics, the style and color of Raincoats are becoming more and more fashionable. It has no longer simply used as a functional jacket and has become a fashion item.

[Reflective raincoat] What coating is good for reflective Raincoats?Why can reflective raincoat prevent rain and reflect

Reflective raincoat, as the name suggests, is a rainproof clothing that combines rainproof and reflective protection.So how can it be achieved by rain and reflective function?

First of all, from the fabric, the fabrics for raincoat include high dense fabrics and coating fabrics.High density cloth is usually woven from the thin chemical fiber yarn. The density is very high. In addition, the non -water absorption of the chemical fiber yarn itself has led to high -density.

The umbrellas we often use and some basic Raincoats are highly dense fabrics.Of course, this kind of non -water properties are limited to small and medium rainstorms for a period of time. For example, if it is a long rainy environment, umbrellas will still leak rain.

At this point, we need to use another fabric: coating fabric.

To be precise, coating fabrics are a kind of fabric for special process processing, with two layers or even more layers.It is to use solvents or water to put the need for coating gel grains (yesPUglue,A/Cglue,PVC, PEGlossom) Solubinates into drooling, and then in a certain way((Round net, scraper or roller) evenly applied to the fabric (with cotton, polyester, nylon and other substrates), and then fixed through the temperature in the oven to form a layer of uniformly covered with rubber on the surface of the fabric to achieve waterproof waterproof waterproof, Windproof, breathable and other functions.

This is actually simple, but operation is the key!That is, the use of solvents (current fabric fabrics generally use toluene or butanol) to use the coating gel grain (there isPUglue, A/Cglue, PVC, PEPlatform) and other dissolving into drooling (the ratio of the gelatin and the solution, viscosity, etc.) is evenly applied to the fabric (with cotton, polyester, nylon and other substrates) in a scraper, and then passed through the oven passed the ovenThe inner temperature is fixed, so that a layer of uniformly covered with glue on the surface of the fabric is to achieve waterproof, windproof, and vaporic functions!

The coating fabrics or fabrics are generally improved in terms of cracks. These coating fabrics are used in down jacket fabrics, skiing fabrics, work protection clothes fabrics, Outdoor sportswear fabrics, etc.

And if you want Raincoats to have rainproof and protection at the same time on rainy days, we need to add another thing on the basis of the original raincoat: reflective material, usually reflective bands and lattice bands, or reflector coatings.

What rain tools are there in common rain

1. Rainwear

Buying and maintenance of raincoat

1. Fabric

There are three common fabrics:

Polyethylene (PVC): It is the jelly semi -transparent plastic raincoat often seen outside. This raincoat is low in price and the disadvantage is that it is easy to damage;

nylon and polyvinyl chloride: It is a layer of PVC waterproof layer in the inside of the nylon fabric. Its price is moderate and it is not easy to damage.

waterproof and humidity cloth: It is coated with a layer of waterproof and humid coatings in the inner surface of the fabric. Its waterproof and humidity layer has 1 billion micropores per Square Square. These micro -holes can allow gas molecules to pass, but it cannot make larger water molecules.Through it, it can achieve waterproof and breathable effects; the disadvantage is expensive.

2. Workman

The workmanship of Raincoats is mainly reflected in the spacing of the garment. If the equipment for producing Raincoats is backward, the pitch of the garment is too large, the needle seam is inconsistent, and the sealing is not up to the standard, which will easily lead to water seepage.

3. Style

When buying Raincoats, you should first consider the rainfall effect and wearing comfort, and then pay attention to the beauty and generosity.There are two common raincoat styles:

Wind coat -style raincoat: windbreaker raincoat is also commonly known as Little Feixia and cape -like Raincoats. It is commonly common raincoat.The advantage is that it is convenient to use. It is fast to wear. The disadvantage is that the rainproof function of the legs is slightly insufficient.

Two -long raincoat: Two -long Raincoats are Raincoats and rainco trousers.Its advantage is that the rainproof function in the leg is better than a windbreaker raincoat. The disadvantage is that it is more troublesome to wear.

4. breathability

If the breathability of the raincoat is poor, it will cause the tightly cover the human body, causing the heat to be exhausted in the body, and the cold inside heat, forming stagnant water, and wetting on the body.

Rainy coats must also pay attention to maintenance, so as to extend their service life.After the raincoat is used, it is best to wipe it with a dry cloth. It is naturally dried in the cool place. Do not expose it under the scorching sun.Do not rub it when cleaning the raincoat, which will cause polyvinyl chloride and nylon cloth to leave, causing the air to penetrate and foam.When light wrinkles appear on the raincoat, you can hang it on the hanger to let it naturally recover.If the wrinkles are tight, you can soak the raincoat in a hot water at about 70 C for 2 minutes. After taking it out, put it on the tablet and flatten it, and then dry the water traces to restore the flat. Be careful not to pull hard.

Second, rain shoe

That is, water -separated shoes worn on rainy days.

Satellite of raindrops

Rainwands are divided into material: rubber raindrops, PVC raindrops, EVA raindrops.

Rainwands are divided into age: children's rain boots, children's rain boots, big children's raindrops, adult raindrops.

Rainwands are divided by gender: women's rain boots, men's raindrops.

precautions

size:Most people are buying shoes, but rainders are not the same as ordinary shoes, because the inside of the rainwood is relatively cool. It is recommended to buy a large number. This can be added to the inside.Comfortable, you can change a pad when it is cold, so that it is not too cold in winter.

Body shape:Today's raindrops look like boots, so how to choose raindrops that suits your legs are very important.It is recommended that the calf is relatively rounded, you can choose some dexterous rain boots; if netizens with tall figures can choose high Tube, the medium -sized figure will be more appropriate to choose a medium -Tube style.

raw material:Rainwands have always given people a stuffy and impermeable impression, and most people feel that it should not be worn for a long time.But it is important if you encounter a pair of rain boots that rains all the week, making your feet comfortable and not to produce athletes.Therefore, Xiaobian suggested that when you buy raindrops, choose rain boots of natural rubber raw materials, and do not choose plastic rain bears.

price:The price of rain boots bought on the market is uneven, as low as tens of yuan to thousands of yuan.However, Xiaobian recommends that buying rain boots does not need to choose expensive big names. You can choose raindrops between 100--200, which not only guarantees the quality and is more comfortable to wear.

Function:The biggest function of raindrops is waterproof and non -slip, so everyone must not ignore this primary function. Without this special function, fashion will lose his role.

Third, rain boots

Rubber raindrops can accelerate the aging of rubber products, so as to make it hard and softer.Therefore, the rainders should not be exposed for a long time, let alone exposure and baking.You should also avoid contact with coal sleeves, gasoline, etc., because these chemical solvents can dissolve rubber and make the upper stick.When you wear, do not touch the pointed objects such as broken glass, wire, and iron nails. Once you scratch the leak, you cannot continue to use it.

Favorites with rain shoes, it is best to use paper or cloth first: wrap the raindrops only, and then install it in the shoe box, store in a cool and dry place.

Fourth, umbrella

1. Usage selection

Is the umbrella used to hide from the rain, or to hide from ultraviolet rays, or to make props.If it is an umbrella hiding from ultraviolet rays, it is recommended to choose a silver fabric on the surface or inside, so as to effectively reflect ultraviolet rays.Select the color that is suitable for your age to match.

2. Structure selection

a. The umbrella is manually opened and opened and automatically opened, so you must clarify what structured umbrella you are accustomed to.

b. According to common sense analysis, most people like it and are used to automatic umbrellas.But handmade life is often longer than automatic.

c. There are upright and Bone shrinkage.It is convenient to shrink, it can be folded, and the volume is small.

3. Something selection

Everyone knows the fabric of the umbrella, the rest is the internal skeleton, which is very critical.When you see strong wind, many umbrellas are covered, that is, the skeleton is not effective. Here it is recommended to choose a thick and sturdy steel material.

4. Weight volume

Choose an umbrella that is suitable for your own needs. It is best to be compact, just enough, so it will not be too tired to hold it.It is usually enough in the diameter within 60 cm, unless you are big.

5. Fabric selection

There are many fabrics in umbrellas, but it is best to choose an umbrella containing Tefuron fabrics. The fabric of this umbrella can be waterproof and fast.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[Rainwear purchase] How to choose the right raincoat on the color of Raincoats

What color is safe for raincoat

The color of the raincoat is very important. Many people choose Raincoats to choose their favorite color. As everyone knows, the color is important.When it rains, the sight is easy to blur and the visibility will be affected. If you choose a light -colored raincoat, it is not easy to be discovered by vehicles or pedestrians on rainy nights, especially on rainy nights.Therefore, the color of the raincoat should choose bright bright colors, such as red, bright yellow, blue and so on.

If the color tone of the raincoat is darker, it is difficult to attract attention, it is not conducive to protecting yourself, and the warm color is eye -catching, which can remind others to pay attention to their own existence.More importantly, the emotions of people in rainy days are generally low, warm color can stimulate people's vision, mobilize people's emotions, and keep people a sensitive response, which often reduce accidents.

How to choose the right raincoat

Sometimes it is heavy and rainy, and umbrellas cannot work at all. Only by wearing Raincoats is more practical. Let the experts tell you how to choose suitable Raincoats and do well in maintenance can the use period of Raincoats be extended.

shape

Windwear raincoat: windbreaker raincoat is also commonly known as Xiaofei and cape -like Raincoats. It is a common raincoat.

Advantages: The characteristics of windbreaker Raincoats are convenient to use and quickly wear.

Disadvantages: For the rainproof function of the legs, it is slightly insufficient. If the rain and the wind are large, the legs are often wet by the rain or sprayed by the car.

Two -off raincoat: Two -long Raincoats are Raincoats and rainco trousers, usually commonly used for shot -type locomotives.

Advantages: The rainproof function of the leg is better than a windbreaker raincoat.

Disadvantages: It is more troublesome to wear. If the rain comes a little bit, the raincoat may have been wet before wearing it.

Material

Polyvinyl chloride (PVC): That is, the jelly semi -transparent plastic raincoat often seen outside. This raincoat is low in price, but it is easy to damage.

nylon and polyvinyl chloride: It is another layer of nylon cloth materialPVCThe waterproof layer, its price is moderate and it is not easy to damage. It is the main material of the raincoat now.

waterproof and humid cloth: It is coated with a layer of waterproof and humid coatings in the inside of the fabric, such as police and climbers commonly usedGORE-Texbrand raincoat, its waterproof and humidity layer is counting per Square meter10For 100 million micropores, these micro -holes can allow gas molecules to pass, but they cannot allow large water molecules to pass, so they can achieve waterproof and breathable effects; the disadvantage is that the price is high.

Choose

Most of the raincoat packaging will have a comparison table that chooses the raincoat size by height, but because the Raincoats manufactured by the raincoat manufacturers on the market are different in size, it is not recommended to buy different brands directly to buy different brands.The raincoat is prone to errors.

It is best to try on Raincoats, but usually the Raincoats sold in hypermarkets cannot be tried. It is recommended to wear clothesmPeople who buyLThe raincoat, and so on, it will be better, even if you wear more clothes in winter.