Classification of baby swimming rings

Classified by material

1. Plastic baby Swimming ring

Such products are made of plastic, most of which are single airbags, and the design is almost the same as adult products.It is a bit simple, easy to make, and the price is relatively affordable.

2. PVC Baby Swimming ring

PVC materials are relatively new. This material is better, whether it is gloss, feel, comfort, or firmness, and the leak -proof effect is also good.Most of the products of PVC are installed with double airbags or four airbags, and the safety performance is better.

Classified by airbags

1. Single -gas sac baby Swimming ring

This Swimming ring is the overall design and production, which is not used for inflatable air.The full -fledged swimming circle is poor, and the baby's body is very soft and tender. Therefore, this swimming circle may not be particularly comfortable for babies.

2. Double airbag Baby Swimming ring

Two airbags were installed on the double airbag baby Swimming ring, and double buckles were also set up, providing dual insurance for infants to learn swimming.Most of them are designed with dual airbags. Each airbag has its own gas mouth. When inflating, pay attention to adjust the comfort, not too much or too little.After putting on the baby's Swimming ring, you have to buckle it, so that you can rely on the buoyancy of the other airbag to hold the baby in the critical situation of one of the airbags, and strive for more time for the mothers to save the baby.Make sure your baby's life is safe.

3. Tethel cystore baby Swimming ring

The original intention of ensuring the safety of the baby's safety was divided into two design and production.When using this Swimming ring, if there are 3 airbags in 4 airbags, users will also hold the baby out of the water within the safe time range, and the possibility of 3 airbags at the same time is extremely small, soThis Swimming ring is completely for the safety of the baby.

However, there are also shortcomings in this four -gas sac swimming circle.One, inflatable problem.When inflating each airbag, the gas in the pro -sac on both sides must be considered to ensure the balance of the baby, which increases the difficulty of inflatable.Second, it is easy to scrap.As long as the four airbags are damaged, the remaining three are useless. The entire Swimming ring is directly scrapped, which increases the damage rate of the Swimming ring.

Classified by parts

1. Neck ring

When a baby was born, he couldn't look up. At this time, you could use this product.The height of the water surface of the baby swimming pool is similar to the height of the neck ring worn by the baby.

2, armpit circle

In the process of growing up, babies are becoming more and more interested in swimming and need to further learn swimming. However, as the ability of activity enhances, they will hate the feeling of neck being restrained and yearn for a wider field of vision, and the water depth of the baby's swimming pool is not enough to achieve the water depth of the swimming pool to achieve the water depth of the baby swimming pool to achieve the water depth of the swimming pool to achieve it to reachLet the baby continue to swim.If the original swimming pool is also needed, it can only change the baby's swimming height or the depth of the pool, move the Swimming ring down, and put it under the armpit of the baby to increase the height of the baby's swimming, thereby generating the underarm circle.

Classified by shape

1. Round baby Swimming ring

The circular Swimming ring is the most primitive style, and it is also the model of most swimming rings.The circular shape is not only for the appearance of the appearance, but also to improve the balance of the Swimming ring, so that the baby is safe and comfortable to swim freely.

2. Star -shaped baby Swimming ring

The star Swimming ring is designed with a circular Swimming ring. The difference is that the periphery of this Swimming ring has arc, which is more advanced than the circular Swimming ring, and the shape is more cute.However, there are also disadvantages. The original circular Swimming ring was dug into a star shape. In the meantime, the inflatable space decreased, and the buoyancy was weakened, which caused most of the swimming rings to sink, which increased the surface resistance. This made the baby's swimming difficulty.increase.

Features of professional baby swimming rings

1. The Skin of infants and young children must be softened. To ensure safety of product materials, it must meet the standards of medical equipment.Select the materials to meet scientific standards, pay attention to protect the baby's Skin.

2, Smooth appearance to prevent stabbing babies.

3. Choose a soft -colored product, which will not cause visual stimulation to the baby and avoid affecting its visual development.

4. Install multiple airbags. Four is better. Each airbag is equipped with an inflatable mouth to ensure that the buoyancy of other intact airbags when a certain airbag is damaged can be called the baby to get out of the water to prevent hidden safety hazards.

5. In order to protect the baby's jaw, the Swimming ring must have a unique mandibular groove design.

6. Magic buckle: The buckle band at the upper and lower ends is used to hold the baby swimming circle to ensure the safety of the baby during swimming.The size is adjusted according to the baby's neck circumference, so that he can swim comfortably and safely.

7. Leakage gas valve: The baby Swimming ring uses a special leak -proof design. Even if the gas mouth is not closed, the leakage will be slow, so as to strive for enough time to rescue the baby.

How to use baby swimming rings

1. Inflatable

Perform in order in front of it first. First, pull out the air mouth inside the airbag, open the lid, and then insert the mouth mouth to insert the gas mouth to press it tightly.Then use two fingers to pinch it tightly, about 40 % of the gas, and then use the same method to charge the front airbags and fill about 50 % to ensure that the two sides are full of 90 % of the gas.During this period, pay attention to charging the gas slowly, and only need about 60 % of the gas when used.(Pressing with your fingers, the thumb is sinking around a finger)

2. Adjust

First adjust the airbags on both sides to balance, that is, the gas volume in the airbags on both sides is consistent, so that the inner ring is round, and then install the buckle band and install the buckle.Perform safety inspections before use, pull the insertion in different positions, depending on whether there is a gap between the airbags on both sides. If there is a gap, you can shorten the buckle band.

3. Powder

(1) In the order of the previous and back, the two sides of the swimming circle are relieved.

(2) Open the gas mouth cover and pull out the air mouth from the airbag. Pay attention to the force when pulling the air.

(3) At this time, there are two methods. One controls the root of the gas mouth to prevent the gas from leaking too quickly; secondly insert the gas needle utensils into the position of the ventilated openings of the air, and finally gently press the airbag to slow down the gas slowly to slowly slowly press the gas to slowly slow down the gas to slow down the gas slowly.Remove.

precautions for using the baby swimming circle

1. Insert bands cannot be pulled too much, prevent damage, cannot remove the socket at will, and install it correctly to prevent falling off.

2. When using gas needles, you cannot be too hard or inserted too deeply to prevent the Swimming ring leak -proof air valve or even piercing swimming rings.

3. If it feels that the inflation is too laborious or unable to fill the gas, it may be that the leak -proof film is too close to the closure of the leak -proof piece. You can pinch the root of the filled mouth with your hand to open the leak -proof film and then inflatable.

4. It is strictly forbidden to place the Swimming ring near high temperature to prevent problems with the material.After use, dry it and place it in a dry and cool place.

5. If the Swimming ring is equipped with a thermometer, do not place the thermometer in the hot water of 50 degrees and 50 degrees above 50 degrees to avoid the problem of errors or the thermometer damage caused by the visual value or the thermometer in the measurement Tube.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. How to use the lifeburn circle

Most of the falling water accidents are sudden, and water rescue is actually Running against time.In emergency situations, when some people fall into the water or flood disasters are trapped, the golden time of water rescue is only a few minutes, and the water falling and rescuers need to understand the correct use of the life circle in order to rescue more quickly.

1. The throwing person holds the lifeblood of the lifebuilding circle in one hand, and throws the lifebing circle in the lower direction of the waterfall person. When there is no flow and the wind should be thrown in the upper wind, so that those who fall into the water can climb the water. Be careful not to hit the water.It can also be tied to the railing by the railing, throwing the life circle with both hands.

2. If someone does not fall into the water during sailing, the water dropper should call loudly to attract the attention of other people.The discoverers should get the lifebuilding circle nearby and quickly throw them towards the sea near the waterfall. The specific method is to leave the life circle to the water fall.Those who fall into the water first grab the handles, then press the side of the life circle with both hands at the same time, so that the lifebuilding circle is erected, the hands and heads are in the circle, and then the life ring is sandwiched under the two armpits, keeping the head higher than the water surface.The body floats in the water, waiting for rescue.

3. If someone falls into the water during the mooring of the Ship, it is best to leave the life ring with floating cables at this time.After the falling water was climbed, the staff on the boat recovered the floating cable and pulled the falling water to the edge of the boat.

2. precautions for the use of lifeblocks

1. storage of the lifeburn

The Lifeline should be separated from the two -side side of the Ship, and there should be at least one stern; it should be able to remove it quickly and not to be permanently made.

2. The custody of the life circle

The life circle is stored in open -air, and it is easy to damage. When storage, you should pay attention: often pay attention to whether the appearance is cracked, whether the hand is worn or mildew, and whether the buoyancy material is aging;Rust removal and paint should be repaired in time.

3. precautions for Safety Circle Safety Circle

The life of the lifebuilding circle should be correct; the life of the lifebuilding circle cannot be hit to the water; pay attention to the use of the life circle that is not allowed to be used casually; check every three months.

4. Regulations on the management regulations of the life circle inspection and maintenance

The sailor chief (or the designated person in charge of the platform) counts the number of life circles per week (before the typhoon comes), and check the reflective band, self -light and ropes on the life of the lifebing circle.Supervision for replacement.If you find loss and damage, report safety supervision immediately for supplementary and maintenance; reflective bands fall off and paste immediately.The self -lighting Lights of the lifebuilding circle shall be checked by the sailor chief during each dynamic period.Performance; if the battery enters the moisture, the battery will gradually fail, so you cannot pull the water in the water at will.

1. What circle of infant swimming is good?

1. Because the baby's Skin is delicate, the product must ensure the safety of the material, otherwise the harmful substances are contaminated by the baby's Skin, which can easily cause symptoms such as dermatitis.When buying, the mother should focus on the standards that meet the standards and have no irritating smell.

2. The appearance of the Swimming ring should be Smooth, and there should be no too much bumps to prevent the baby from twisting the body and scraping the baby's Skin when swimming.

3. Choose a bright color Swimming ring, although it will stimulate the baby's vision, but if a drowning occurs, the mother can go to the rescue in time.

4. Check whether the airbags have leaks to ensure that the airbags are not easily damaged during use and eliminate hidden safety hazards.

5. In order to protect the baby's jaw, there is a unique mandibular groove design in the Swimming ring. It is recommended that the mother check it carefully when buying.

6. If the swimming rim has active magic buckles to ensure the safety of the baby when swimming, you should choose to choose and test whether the magic buckle can be adjusted freely.

7. If the Swimming ring adopts a unique leak -proof design, even if there is no air mouth, the speed of air leakage will be very slow, so that you can fight for the time for the mother to help the baby. Therefore, the safety is higher and it is worth buying.

Second, the choice of baby swimming circle

1. Choose according to the type

It can be seen from the classification of the infant swimming circle that this classification is divided according to the position worn by infants and young children.The lower circle is set under the armpit, and the arm ring is worn on the arm. Different types of swimming rings are suitable for different babies.

2. Choose according to age

For example, the neck ring is suitable for babies under one year old. If you worry about the harm of the neck ring to the baby's cervical spine, you can choose to swim parent -child.The circle is suitable for the one -year -old baby. The baby's growth and development are basically perfect, and you can learn to swim systematically.The seat and the underarms are generally suitable for babies over the age of two. The baby's swimming is already skilled, and the arms ring is suitable for babies with good balance ability over three years old.

3. security selection

Choosing the corresponding Swimming ring is only the first step. Pay attention to whether the Swimming ring is a safe and qualified product; the surface of the unqualified Swimming ring is not Smooth enough, it is easy to scratch or rub the baby's Skin, especially the neck ring is very harmful; some babies are very harmful; some babies areThere is a leak in the Swimming ring. When the baby is wearing a swimming, it is prone to turning water; some swimming rings materials are not environmentally friendly and toxic, stimulating the baby's Skin.

4. Size selection

In addition, you must choose a suitable Swimming ring for your baby.If the swimming circle is too tight, it will usually cause oppression and cause the child's swimming posture. In this case, the baby's swimming is not excited enough.The excessive swimming circle may make the child drown, which is more harmful. You must choose a Swimming ring suitable for your baby according to the height and weight of your baby.

5. Choose a big brand

At present, there are many types of infant swimming circles in China, diverse brands, and various patterns, shapes, etc., but ensuring the safety and comfort of the swimming circle are always the first step. Choosing a big brand of swimming rings is generally more guaranteed.You can experience or consult a nearby baby swimming pool.

1. Can the plastic swimming circle be broken if it is broken?

1. iron repair method

Let's prepare some roasted paper first.Then prepare an iron.Then take out our broken Swimming ring.Put the roasted paper on the Swimming ring.Then use the iron to iron the place.Take the roasted paper, so that our broken swimming circle is repaired.

2. Repair film method

Repair films are tailored according to the location of the repairs.Apply PVC for strong glue on the repair tablet.Plug the repair film in the position that needs to be repaired and flat.Put the repaired place under heavy objects and press for 12 hours.

2. What glue can be used for plastic swimming rings to make up for

Plastic swimming rings can be used for PVC for strong glue, which can repair air beds, inflatable sofas, water beds, inflatable boats, rubber boats, inflatable pools, baby swimming pools, swimming rings, neck circle, inflatable toys.

Note:

1. The surface of the Swimming ring must be dry, cleaned, dust -free, or oil, otherwise it will affect the curing speed and the adhesive strength to find the air to remove the air.

2. If the hole is less than 3 mm, you only need to drop three drops of glue. After 4 hours, drop it again, and then it can be used normally in 4 hours.

3. After using it, you should wipe the bottle mouth clean and cover it with a bottle cap.

1. How to inflatable the inflatable Tube in the Swimming ring

1. First charge the front airbag (with the picture and text), pull the air mouth out of the airbag, open the air Tube, insert the air Tube and the Swimming ring, and pinch with your thumb and index finger.60 % (squeeze the inflatable airbag with your fingers, about 2kg, and the mother's finger is pressed by about one finger, in order to achieve 60 % of the gas volume).

2. charge the reverse airbag again, the total gas volume reaches 90 %, the two fingers are tightly tightened, and then the gas mouth is pressed into the airbag.

3. Note: It should be slowly carried out when inflating.

two,How to cheer in the Swimming ring

1. Wipe the inflatable mouth of the Swimming ring to prevent the foreign body from blocking the foreign body and gently drag the inflatable door.

2. Or the launch of the surface of the Swimming ring, open the plug, and insert the straw into the door vertically.

3. Slightly push the straw to open the inner wall of the cutting door, or make the straw through the cut door into the Swimming ring.

4. Blow your mouth with your mouth. After full, use your hand to tighten the parts connected to the inflatable mouth with your hands.

5. Press the inflatable door into the Swimming ring to prevent scratching or peeling the soft plug and leakage.

three,How to deflate in the Swimming ring

When you are airing, you can use a card or toothpick and other fine objects to extend from the pores and press it inward.