1. How to choose submachine pants

1. Each pants should be completely waterproof. At all seams, you must use hot pressure strips to prevent water leakage. Carefully see if the rubber bar in the clothes is flat and there is a foam.This is very important for the waterproof performance of clothing.

2, Now there are a lot of jacket pants, add one more dot pressure gels at the combination of two or several rubber strips to prevent the use of glue strips from raising for a long time.This process is used on high -end three -layer gel jacket pants.

3, The main zipper of the jacket is either waterproof zipper, or the placket is used to prevent rainwater from penetrating.If it is a normal zipper and a placket, pay attention to whether there is a backfolding side at the placket. This design allows the rain to flow down the folding edge without penetrating into the zipper.

4, Whether the hat can block the wind and rain well, whether the activity of the back head is free.If you use activities such as ice climbing and snow mountain climbing, you must also consider the activities after wearing a helmet.

5. Whether the tightening method of the jacket cuffs is appropriate?

6. Whether the hem or waist of the jacket has a windproof skirt. If there is no windproof skirt, whether there is a drawing rope to tighten the clothes to prevent the snow from being poured into the body from the hem in a harsh environment.

7. The style of charge pants is generally selected according to your own preferences. Of course, high -end products of large brands often make better three -dimensional cutting, and they are more fit.The colors of the climbing model are often bright colors such as red and yellow, and casual charge clothes can be used as their preferences.

two, How to clean and maintain Assault pants

1. First of all, do not wash well with the washing machine, because the strong force generated by the washing machine when rotating and dehydrating, the waterproof layer and cloth of the submachine pants will be separated.Decoction leads to damage to the performance of charge pants.

2. The submachine pants are not suitable for machine washing because of the special fabric and the waterproof and breathable film inside. It is best to wash it alone in cold water.In terms of detergent, remember not to use alkaline washing supplies such as washing powder soap. It is best to use a neutral washing solution. If it is not easy to determine the nature of the solution, you can use bath liquid or shampoo.

3. Washing method: dissolve the neutral detergent in cold water, put the dry assault jacket into soaking for 20-30 minutes, and then gently rub it with your hand.After soaking, you can brush it with a soft brush.Do not dehydrate with a dried machine after washing, otherwise it will be fatal damage to the film, Hanging in a shade in a cool place.

4. The place where the Assault pants are easy to dirty are the inner layer of Buri, and the buzzer is a chemical fiber material, which is easy to clean. Just use a neutral laundry powder to soak for about 20 minutes.Gently brush to easily wash.

It should be noted that do not twist the booming pants with clean water.Worting and exposure to the waterproof layer and seam sticky tape that hurts the clothing!In the cold winter, the Assault pants should not be washed often, so the maintenance method is almost the same, but the winter weather is relatively cold.As long as the performance of the Assault pants is not destroyed.

1. What is the material of the Assault pants

The fabric of the submachine pants is used to use TreayPolyamide50D fabric, composite Fabskin micro -porous waterproof and breathable film, double -layer gel, the surface passes a new generation of nano -splashing water, oil -proof, and pollution -proof treatment. It is more durable and durable.No water leakage, waterproof 10,000, breathable 15,000, 100%windproof.

The dressing of the submachine pants is Polyestermesh, which is conducive to fast sweat. All sewing is specially treated with special glue. The deduction is used in the American Duroflex product.product.

In addition to GORE-TEX, the fabrics on the market in China are also Conduit, Omnitech, Memo-TEX, Power-TEX, Hydro-Dry, Weathertite, etc. The total characteristics of these fabrics are waterproof and breathable, not to talk about boring.Performance data, in terms of use, their performance is not very different.

Second, the characteristics of Assault pants

light and light professional climbing and skiing clothing. The models adopt the classic models of international popularity, the inner breathable zipper design of the thigh, 3D knee joint design, removable strap, pants Tube with snow skirt, sticking to put on pants, knees, buttocks, buttocks, buttocks, buttocks and hips.The thickness of the trousers can effectively increase wear resistance.After strict quality monitoring of the entire clothing process, the thread is controlled at 3 stitches/cm.It has the characteristics of waterproof, breathable, windproof, and tear resistance.Uses: windproof, rainproof, breathable, wear resistance, tear -resistant, easy exercise.

3. Can the submachine pants be washed with a washing machine?

Do not wash well with a washing machine, because the strong force generated by the washing machine when rotating and dehydrating, it will separate the waterproof layer of the Assault pants from the cloth.Destruction of pants performance.

The Assault pants are not suitable for machine washing because of the special fabric and the waterproof and breathable film inside. It is best to wash it alone in cold water.In terms of detergent, remember not to use alkaline washing supplies such as washing powder soap. It is best to use a neutral washing solution. If it is not easy to determine the nature of the solution, you can use bath liquid or shampoo.

pantsWashing method: dissolved the neutral detergent in cold water, put the dry punching jacket into soaking for 20-30 minutes, and then gently knead it with your hand.You can use a soft brush to brush lightly.Do not dehydrate with a dried machine after washing, otherwise it will be fatal damage to the film, Hanging in a shade in a cool place.

The place where the Assault pants are prone to dirty are the inner layer of Bacchus, and the buzz is a chemical fiber material, which is easy to clean. Just use a neutral washing powder to soak for about 20 minutes. Gently use a soft brush (or soft hair brush) in the dirty place.Wash it easily.

It should be noted that do not twist the booming pants with clean water.Worting and exposure to the waterproof layer and seam sticky tape that hurts the clothing!In the cold winter, the Assault pants should not be washed often, so the maintenance method is almost the same, but the winter weather is relatively cold.As long as the performance of the Assault pants is not destroyed.

1. The difference between the soft shell and the hard shell of the Assault pants

The version of the soft shell Assault pants and the hard shell submachine pants are very different.

1. Different uses

The original use of soft shell was used as Rock climbing and ice climbing clothing, and was later accepted by other types of outdoor activities. Its characteristics were soft and closed, and the tops were mostly short jacket styles.soft shells are usually used as two layers, and the existence of the middle preservation clothing is not considered.

The hard shell is also known as the commonly known charge. It is used as the outermost isolation layer and protective layer in outdoor activities to prevent the invasion of bad climate factors such as wind, rain, and snow, while ensuring that it has relatively good breathability.

2. Different performance

soft shells are usually softer than hard shells, and some fabrics also have certain elasticity.Windproofing is the necessary performance of all soft shells. Secondly, some soft shells compose together with a certain thickness of the chorine grip layer, and have moderate warmth performance.There are also some soft shells in the fabric that combined with waterproof and breathable membranes into waterproof soft shells, which can usually reach the level of anti -medium rain.The soft shell also has DWR water -proof coating.

For those who do nt know Outdoor equipment, they basically have a misunderstanding. It is believed that the jacket (hard shell) itself will have a very good thermal insulation effect. This is a very serious fallacy. In fact, it is just a layer of chemical fiber."Thin Skin", does not have any insulation.However, because the hard shell has good isolation and windproof performance, it can prevent or slow down the air fluidity between the hard shell and the body, and avoid the production of air -cooled effects.

Second, the fabric structure of the hard shell jacket

Due to the different needs of the user, the environment of the hard shell can be subdivided into three types: three -layer structure, two -layer structure, and two -layer and semi -structures.

1. Three layers of structural fabrics: from the outer layer of the nylon, the waterproof and breathable film, and the inner layer of the nylon protection to the overall fabric.The advantage is that it is thicker and has good wear resistance and durability.The disadvantage is that the weight is large, the hardness is high, and the price is more expensive.Therefore, it is mostly used on top professional hard shells and is suitable for the extreme environment.

2. Two layers of structural fabrics: The outer layer of the nylon is tightly pressed with the waterproof and breathable membrane, and the inner layer is equipped with an independent protective net lining.The price of two layers of structural fabrics is relatively low, easy to process, and has good touch and comfort.The disadvantage is that wear -resistant, poor durability, and unsatisfactory storage.Two -layer structure fabrics are mostly used in non -limit environments, and the hard shells of Outdoor leisure activities are located.

3. Two -layer semi -structural fabric: It is also composed of the outer layer of the nylon and the waterproof breathability film. It is sprayed with a very thin PU protective layer on the inner side of the waterproof and breathable membrane.The advantage is relatively soft and lightweight, small storage volume, and because the thickness of the fabric is thin, so the breathability is better.However, the disadvantage is that the fabric is abrasion-resistant and durable, especially the PU surface of the inner PU surface of the fabric is not well protected. It is prone to damage under large intensity conditions.

Each fabric structure has its own characteristics. When we choose charge fabrics, we can choose according to different requirements. It is best to prepare a few charge jackets with different fabric structures to prepare various needs.

1. Is the Assault pants and Martin boots look good?

The Assault pants with Martin boots are relatively good.Under pants with Martin boots are a common match.Martin boots are divided into three types: short, middle Tube and long cylinder, which can be selected according to personal preferences.This combination can increase fashion and temperament, while maintaining comfort and practicality.In addition to Martin boots, the Assault pants can also be matched with various types of sneakers.This combination is suitable for people who like sports or outdoor activities.sports shoes can choose classic running shoes or trendy casual shoes.There are also motorcycle boots, military boots, etc. These boots usually have tough appearance and practical functions. They are more suitable for those who like outdoor activities.

In short, submachine pants can be matched with various types of shoes, and the specific choice can be carried out according to personal preferences and occasions.

Second, what kind of shirt is matched with submachine pants

1. T -shirt:Attorney is a kind of clothing suitable for outdoor sports. It usually has functions such as windproof, waterproof, breathable, suitable for outdoor activities and harsh weather conditions.The T -shirt is a casual and relaxed clothing, which has the advantages of comfort, breathable, sweat absorption, and is suitable for summer and warm environment.The matching of Assault pants and T -shirts can show a stylish and casual style, suitable for various occasions and activities.This combination allows people to maintain comfort and convenience while not losing their fashion.

2. Windproof jacket:Wind -proof jacket is a thick and warm -keeping clothing that can provide additional warmth and protection, suitable for cooler and harsh weather conditions.The Assault pants are functional clothing, which have functions such as windproof, waterproof, breathable, and are suitable for outdoor activities and harsh weather conditions.The combination of front pants and windproof jackets is also suitable for various outdoor activities, such as Hiking, climbing, Camping, etc.In outdoor activities, this combination can provide sufficient protection and comfort, and it will not be too heavy or cumbersome.

3. Passionate clothing:The Assault pants are paired with a fleece coat, such as a fleece jacket or a fleece underwear, which can increase the warmth effect and provide additional comfort in the cold environment.

4. Technical clothing:Choose technical clothing with breathable, moisture -absorbing and sweating function, such as sweatshirts or Outdoor shirts with fast -drying fabrics with Assault pants, which can provide a better exercise experience.