1. How to clean the hiking shoes

1. Unlock the shoelaces so that the inside part of the shoes can be better cleaned.At the same time, take out the insole to facilitate cleaning alone.

2. Prepare a pot of warm water (water temperature does not exceed 45 degrees Celsius), a soft cloth or soft brush, and a special cleaning agent for shoes that may be needed.

3. Use a soft brush or soft cloth to gently brush to the soil, dust and gravel on the upper and sole.For the stubborn stains of the upper, you can use a soft brush to dip a small amount of warm water for preliminary cleaning.

4. Put the hiking shoes in the prepared warm water to ensure that the upper and shoes are fully wet.Be careful not to soak the shoes in water for a long time, so as not to affect the quality and performance of the shoes.

5. Use a soft brush or soft cloth dipping a small amount of shoes for a small amount of shoes (if any), and gently wash the upper and shoe.For the cleaning of the soles, you can use soft brushes to wash under the water to remove soil and dirt.For the cleaning of the laces and insoles, you can remove it and clean it alone. After cleaning it with soapy water or detergent.

6. If the shoes have odor, you can use white vinegar or liquor after cleaning.Pour a small amount of white vinegar or liquor into warm water and soak the shoes for about half an hour to help remove the odor.

7. Rinse the shoes with water to ensure that all cleaners are cleaned.Use your thumb to squeeze the water in the place where there are many sponges in front of the shoes, and then grab the midsole with your fingers. After the heels are in front, the toes are facing, and start to put your arm several times back and forth to help remove excess water.

8. Put the cleaning shoes after cleaning in a gloomy place.Avoid direct sunlight or high temperature drying to prevent leather cracking or rubber base melting.

9. After the shoes are dry, check whether there is an unclean stain or damaged part, if necessary, further treatment.

10. Store the shoes in dry, ventilated, and cool places to avoid humidity and high temperature.

How to maintain Outdoor hiking shoes

1. When the new Outdoor hiking shoes are worn for the first time, the protective spray should be maintained to maintain the leather to strengthen the water refusal function of the shoes. Before spraying, you should remove the shoelaces.Spray it, especially the hidden parts near the tongue.

2. After each Hiking trip, let go of the shoelaces and take out the insoles to ensure that the shoes are fully dry. Even if it is a long time of Hiking, do not ignore the maintenance of the shoes.clean and maintain.If the hiking shoes are particularly dirty, it is recommended to wash the soil and dirt on the upper with soft brush and warm water. It is recommended to use professional Hiking shoe cleaning agents.

3. Remember, do not put the hiking shoes near the heat source to dry, such as heating device, baking stove, firewood stove, bonfire, etc., because the wet leather is easily "burned" (the fragile, cracking and shrinking) The consequence is that it is extremely easy to cause tear that cannot be remedied.

4. If the hiking shoes are made of dermis, then you need to use a moisturizing care agent or custard milk gently., Crispy, hardening, etc.

5. The textile material on the upper also needs to be regularly used for protection, which can more effectively remove moisture and stains. Similarly, the protection spray dedicated to textiles is also required.

6. Even if it is worn everyday, if the environment is more humid, it is necessary to dry it immediately. Natural leather will absorb a lot of water.The effect of maintenance products.

1. Types of Ice knife shoes

Ice knife shoes are ice shoes worn during skating. The skating items can generally be divided into three categories: speed skating, pattern sliding and ice hockey. According to the characteristics and requirements of the project, Ice knife shoes are mainly divided into three categories:

1. Speed skating knife and shoes

Speed skating knife can be divided into two types: "Avenue Speed Slipper" and "Short -track Speed Slipper". Avenue speed skating knife knife is long, with a narrow blade, large ice area, small friction resistance, and short shoes.It is convenient for athletes to reduce their physical focus and reduce air resistance.

The short track speed skating knife is short, with arc at the bottom of the blade, and the area of contact with the ice surface is small, which is convenient for athletes to advance the arc when the athletes are on the curve. At the same time, the body of the ice knife is higher.In contact with the ice, most of the swords of the special sprinting channel are mostly mobile, for athletes to choose from their own habits and preferences.

2. Ice cock

The height and shortness of the ice hockey knife, short, large arc, thick blade, and the mid -range curved transitions smoothly to both ends, which can prevent slipping to the greatest extent to adapt to the characteristics of fast project rhythm and high resistance.It should be noted that the ice -hockey goalkeeper's ice knife is different from other athlete ice knives. It is made of all -metal and the knife is short. This design is to avoid missing the ball into the net.

3. Flower skating shoes

The sword of the flower sword is generally short, but it is slightly longer than the ice hockey knife. There are several ice teeth at the front of the blade, which is convenient for players to control the balance.At the same time, flower skating shoes mostly use high -shoes waist design to provide sufficient support during jumping.

Fantastic ice knives and shoes are different according to the requirements of amateur and professional, and the methods are also different. The amateur basically uses a PVC base PVC leather. The professional ones are basically the leather material, and the thickness of the inside is thicker and the hardness is hard.

The difference between three types of Ice knife shoes

The difference between the three types of Ice knife shoes is mainly different design characteristics, which is also the difference between the characteristics of the project:

1. The main feature of speed skating is fast speed, so the speed skating knife knife is very long, the blade is narrow and flat, so that the large friction resistance of the ice area is small, and the waist waist is short to reduce the body's center of gravity and reduce air resistance.

2. The ice hockey project is very confrontant. Therefore, the toe of the ice and soy shoes is very hard, the waist is high, the shoes are very thick, and the knife of the ice shoe knife is very short.

3. Falter skating movements are difficult to move and have higher requirements for stability. Therefore, there are grooves in the middle of the blade, and the knife body has arc to facilitate the turning of rotation and footwork.

What are the materials of Ice knife shoes?

The ice knife of Ice knife shoes is relatively sharp. It is generally made of steel. Its material mainly has the following:

1. Carbon Tool steel

Carbon Tool steel is generally used by beginners. Different quality ice knives depends mainly on carbon content. Although the hardness of the ice knife used in the same project meets the same standards, due to the different Levels of steel, under the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, it is compared to comparedHigh -level steel will keep the life of the edge of the ice knife longer.

2. Stainless steel, high -grade carbon steel or high -speed Tool steel

Generally used for skilled or intermediate enthusiasts, the ice knife has a high level of steel, it has strong corrosion resistance, and can improve the frequent jump and rotation of the skaters.This type of ice knife is usually plated with a titanium compound on the surface. After being polished, the maximum hardness on both sides can Dalo Hardness 85, which reduces the friction between the ice knife and the ice.Essence

3. Powder alloys and coating high -speed steel

Generally used in international competition, ice -knife shoes used in international competitions, their ice knives generally have basic essential characteristics such as wear -resistant, corrosion resistance, working surfaces for different ice surface hardness, frequent jumping, sliding, and not easy to connect to the sole welding.The coating high -speed steel is characterized by a thin titanium naineride or titanium carbide on both sides of the blade. The overall blade uses dual metal composite steel.After grinding and grinding, high hardness is formed on both sides. The roughness is like a mirror blade, which greatly improves the life of the ice knife blade without reducing the toughness of the ice knife.

4. Powder metal Tool steel

It has absolute optimal slippery and wear -resistant performance, and only a few companies in foreign countries are produced.

1. What shoes are hiking shoes

Hiking shoe is a shoe specializing in outdoor sports.The hiking shoes are mainly composed of shoe gangs, inner soles, and soles.The upper is generally made of leather, nylon, or leather nylon, and the lining is generally made of artificial materials or soft leather.A good pair of hiking shoes is usually made of a whole piece of Skin (except the heels and the tongue). Such shoes can still maintain a better shape after wearing it for a while.The design of hiking shoes focuses on non -slip and breathability to meet the needs of complex weather and terrain.They are usually divided into low gangs, mid -gangs, high gangs and other types to meet the needs of different outdoor activities.

The historical origin of hiking shoes comes from Europe. With the continuous development of modern society, people's demand for outdoor activities is getting higher and higher. As an important part of Outdoor sports equipment, hiking shoes are self -evident.Having a pair of suitable hiking shoes is essential for people who like Hiking, Hiking and other outdoor activities.

What is the difference between hiking shoes and mountaineering shoes

1. design concept

hiking shoes, as the name suggests, are born to meet the long -term needs of Hiking people.They usually use low -top design to provide moderate freedom for ankles and reduce the sense of restraint.This design not only ensures the comfort of the foot, but also enhances the breathability of the shoes, so that the Hiking people can still maintain the dryness of the foot in a long walk.

In contrast, the design concept of mountaineering shoes pays more attention to the protection of ankles.They usually use high -top design to wrap their ankles tightly to provide additional support and protection for climbers.On the rugged mountain road, this design can effectively prevent the ankle injury and ensure the safety of climbers.

2. Functional characteristics

hiking shoes focus on lightness and comfort, the soles of the soles are soft and have good buffering performance to cope with the impact of long -term walking.At the same time, the soles of hiking shoes also have good grip to ensure the stability in the walking process.

mountaineering shoes pay more attention to functionality.They usually have multiple characteristics such as waterproof, moisture -proof, and anti -slip to cope with the harsh Outdoor environment.During the climbing process, the non -slip and grip performance of mountaineering shoes play a vital role. They can help climbers stabilize their bodies and reduce the risk of slippery.In addition, Climbing shoes also have good weight -bearing performance, which can support the heavy objects that climber bear.

3. Material selection

The upper of the hiking shoes is usually made of light leather, nylon and other materials to provide good breathability and comfort.This material combination enables the hiking shoes to maintain the comfort and dryness of the foot during long walking.

mountaineering shoes are more tough and wear -resistant, such as anti -fleece, frosted leather, etc.These materials not only enhance the wear resistance of shoes, but also provide better protection performance.At the same time, the soles of mountaineering shoes are also harder to provide better support and grip.

4. Applicable scenarios

hiking shoes are mainly suitable for Outdoor environments that are better on road conditions and need to walk for a long time, such as Hiking travel and urban Hiking.In these scenes, the comfort and breathability of hiking shoes can provide the wearer with a good walking experience.

mountaineering shoes are more suitable for technical activities such as mountain climbing and Rock climbing.In these activities, the characteristics of waterproofing, non -slip, and loading of mountaineering shoes can provide comprehensive protection for the wearers to ensure the Smooth progress of the activity.

5. Fashionability

The design of hiking shoes pays more attention to fashion elements to meet the needs of urban leisure.They usually adopt simple and fashionable design styles and can be matched with various clothing.mountaineering shoes pay more attention to professional performance, so it may be relatively conservative in appearance.They pay more attention to practicality and functionality to meet the needs of professional climbers.

In summary, there are obvious differences in hiking shoes and mountaineering shoes in terms of design concepts, functional characteristics, material selection, and applicable scenarios.These differences make the two shoes have their own performance and use, which meets the needs of different outdoor activities.When choosing hiking shoes or mountaineering shoes, comprehensive consideration should be made according to factors such as your activities, road conditions, and personal preferences to ensure that you choose the shoes that suits you best.

1. Introduction to multi -functional anti -cold clothing

Cold -proof clothing, internal flux cotton and other warm materials.The style is not restricted. The good cold prevention clothes are actually sewing the two parts of the cold -proof clothing together -part of the cold protection inside, and a part of the outside part of the windshield.The inner part mainly uses a layer of nylon lining, and then adds key components: a film that stabilizes and protects the insulation material, plus a thick layer of polyester heating material.At this time, the warm layer is greater than the lining -this guarantees that each part of the clothes is warm.

The outer fabric of the cold -proof clothing is generally a thick nylon fabric. The lining is a special fabric with some small holes on it. The humidity in the clothes can be poured out through these small holes, and it can prevent water droplets and wind from penetrating in. The zipper is the zipper.Made of corrosive nylon, the nickel -plated zipper pull head has a 7 times longer life than the ordinary zipper.Before this process, workers mainly used craftsmanship from the inside to the country.Now they want to turn the cold -proof clothing over for the final processing.These big people are strong and strong, and they are very strong. They are between fibrous materials, so they will not damage the fabrics repeatedly.Its secret is the hidden warm layer.It keeps the air in the human body, and then heated it to produce a heating cushion that is against the cold in winter.

Generally, the warm layer, the windshield, and the thick nylon synthesis.

Second, the classification of multi -functional anti -cold clothing

Three types of cold -proof clothing can be used: ordinary cold prevention clothes, plateau -anti -cold clothes and extremely cold cold prevention clothes.

Ordinary cold prevention clothes are designed in general cold areas. Daily cold -proof insulation, such as cotton jackets, is ordinary cold -proof clothing.

The altitude -anti -cold clothes are based on ordinary cold -proof clothing. It is designed for the chloroplasm of the plateau. The plateau environment is large and the air is thin. The design of the cold -proof clothing should consider how to solve the load on the premise of effective warmth.

The extremely cold and cold clothes are based on ordinary cold prevention clothes. It is designed for the high cold area. It is necessary to bear the cold, emphasis on windproof, cold, and breathability of -50 C. It must keep warm and make Skin moisture spread.In order to achieve the level of cold protection under extreme cold conditions, the thickness of the cold prevention layer can be considered.

3. Scope of use of multi -functional anti -cold clothing

The following is the surrounding temperature conditions when different activities and contact time (minimum temperature are for reference only) to reach the heat balance:

A very small activity (1) Smaller activity (2) Moderate activity (3)

Wear 8 hours 6 C -4 C -26 C

Dressing 1 hour -9 C -30 C -30 C

-The activity with a very small range, the body's metabolism 90 W/m2 (standing motionless or sitting, a little arm activity)

-S small activity, body metabolism 115 W/m2 (walking or standing at a speed of 2 kilometers/h, standing and a little arm activity)

-Pitting movement, the body's metabolism 170 W/m2 (walking or standing at a speed of 4 to 5 km/h, on the upper body activity)

These values are set under non -wind conditions, and the radiation temperature is equal to the surrounding air temperature.In these cases, it is necessary to provide sufficient protection for hands, feet and heads.

These values are determined when the sleeves are not removed and the whole set of clothing is closed.

4. Washing skills for multi -functional anti -cold clothes

The maximum cleaning temperature is 30 C, try to avoid mechanical treatment and dehydration, and rinse normally.It is forbidden to use chlorine -containing bleach.Forbidden ironing or steam treatment.It is forbidden to dry out or use detergent.The drum is forbidden to dry.storage pay attention to the presence of the cold protection suit in the original packaging, place it in a dry place, and stay away from the sun.

Soak

Before soaking the cold -proof clothing, remove the dust on the clothes table and the dust on both sides with a clothing, and then dip the detergent with a soft brush water to remove the dirt in the neckline, cuffs and excessive dirt.(Can't twist) After washing.

Washing method

It is best to use less foam, small alkali or neutral when selecting anti -cold detergent. Such detergents are conducive to clearing water -shabu and protecting fiber.When operating, first according to detergent instructions, take an appropriate amount of dissolved in a small amount of warm water, and then inject water from 20 to 40 . The amount of water is 1 to 2 cm in the cold prevention clothing.The soaking time is 3 to 5 minutes, that is, squeeze it by hand, but do not rub it, squeeze and toss while pressing it, repeatedly perform 3 to 5 minutes.After washing the cold -proof clothing collar, squeeze the sewage with your hands from top to bottom. Do not twist to prevent the wrinkle surface from twisting the noodles and scratching the cotton lined with the core.

Clear dirt

Put the squeezed cold protection clothes in more water. In order to keep the light prevention of cold clothes, when you first clear, you can add a little liquor or edible vinegar, repeatedly flip, swing, squeezeIn the water, squeeze the sewage.Repeat this three to four times in this way, and the water to be squeezed is pure.

Dehydrated shade drying

In order to keep the cold -proof clothing without deformation and no water stains, it is necessary to use higher water -absorbing cotton products (such as big towels, cotton blankets, etc.) to help absorb water.The washed cold -proof suit on the Taiwan case, with large towels on both sides and inside, and a large towel in the Sleeve.Then roll the cold -proof clothing with a large towel into a cylinder -shaped squeeze, so that the water of the anti -cold clothing penetrates into the water absorption.Repeat several times until the water was squeezed.Then spread the collar, sleeves, front plackets and other parts of the cold clothing.

1. What is the name of the ice shoes that can be separated from the Ice knife and shoes

Traditional ice shoes are generally fixed on ice shoes. In this way, the athletes must keep the ice knife away from the ice before the ankle and knees are extended to prevent the cutting of the ice surface. In order to speed up, there are ice knives and shoes.The separated ice shoes, this kind of ice shoes is called Clap Skate, also known as a dislocated knife.

In the 1980s, the Dutch Biological Machinery Normal University, Inken Skau, applied the "Claip Ice knife" to ice shoes and connected ice knives and ice shoes with hinges and spring to make the heels rise.It s like walking on slippers, so you can often hear the sound of click in the game. In 1994, this ice knife was the first to be used in the Netherlands.At the 18th Winter Olympics in 1998, almost everyone used this ice knife, and the Winter Olympics record was refreshed 20 times.

2. What are the advantages of ice shoes?

This ice -knife and shoes that can be separated from the shoes are generally used in the avenue speed skating movement. The reason why it is designed like this is to make athletes better play.

When using the traditional ice knife to slide, you must raise the ice knife after pedaling the ice, so that you can better control the balance, and at the same time, it will not increase friction because it is stubborn.The distance is also limited.

The Claip ice knife can be separated from the knife without leaving the ground to complete the footing movement without leaving the ground. This can increase the time of pedaling ice. When your heels leave the ground, the ice knife is still on the ice.Can continue to work.

Compared with the traditional ice knife, the Claip ice knife can also use the athlete's ankle force on the basis of using the athlete's knee and hip muscle group strength, so all speed skaters will use ankle joints after the end of the normal ice.The power of the power is a bit of the tip of the toes.One of the goals is to let the knife leave the knife seat, thereby increasing the ice distance.The second goal is to avoid the tip of the knife that appears when the ordinary ice knife is sliding into the ice surface, so as not to affect the speed.

In general, the designed ice shoes can save athletes' physical consumption, and at the same time increase the amplitude of the athletes, make the action more stretch, and naturally faster.