1. What are the benefits of electric scissors to pruning fruit trees

Electric branches and scissors are a kind of efficient, ecological, safe electric branches and scissors. They can cut fruit branches such as apple branches, grape branches, mulberry branches.Good helper for production.The advantages of electric scissors are mainly:

1. More efficiency

Electric scissors are powered by electricity. Its pruning efficiency is 2 to 3 times that of traditional hand -cutting efficiency, and electric scissors can also be trimmed in both directions. It is more suitable for trimming or shape than ordinary scissors.And in the past, it was unbearable to use manual scissors to trim fruit branches for a long time and arms, while electric scissors would not have this situation.

2. Good durability

The supporting structure of the electric scissors is simple, the operation is stable, the failure rate is low, the blade cutting capacity and life are high, and it can be used for a long time under normal use and regular adjustment.

3. High pruning quality

The performance of electric scissors is stable, and the quality can meet the requirements of Gardening. Under the correct operation, the flatness of the fluff surface is better than manual trimming, and there is basically no leakage.Compared with manual scissors, the fruit branches that are trimmed by electric scissors are closer to the natural growth state. The canned crown surface is larger. The trimmed surface is neat and beautiful, and the buds and leaves are sprouting and sprouting.

4. Good safety protection

Electric scissors have a good safety protection function. The blade follows the wrench. When the stuck is stuck, the circuit self -inspection process will start motor monitoring, and protect the motor without burning.The protection function of both sides of the motor (DC -free motor) is controlled by Hall chip switch.Rewarding the trigger position will open the cuttings and then close.The stress of the battery over loading is overheated and over -discharged and the discharge will be maintained by the protection of the circuit board.

2. What should be paid attention to when the use of electric pruning is trimming

With the development of technology, electric pruning has become an indispensable Tool for garden operations. Electric branches and scissors are not only more laborious when the method is wrong, but also may affect the service life of electric pruning.Pay attention to some matters:

1. When using electric pruning trimming and accessories, we must comply with the instructions and use methods of use. At the same time, the working environment and the work they want to complete should be considered. The use of electric pruning and trimming as a operation that does not meet the requirements may cause danger.

2. Electric pruning pruning requires professional training to use, so that the unfamiliar electric pruning trim or those who do not understand the use instructions are very dangerous to use without training.

3. Do not cut the branches of the working range of the scissors. Do not cut too hard things such as metal, stone and other non -plant materials. Do not clamp the Tool with tiger clamps. If scissors are worn or damaged, please replace the scissors.

4. Electric branches should be kept clean before and after use. After use, use clean cloth to clean electric branches, batteries and chargers, and use soft brushes or dry cloths to clean the dust on the scissors head. Do not use it. Do not use it.Any corrosive or solvents cleaner.

5. Use the equipment correctly according to the instructions of the use. Do not use electric branches, batteries, and chargers. Do not use electric branches, batteries, and chargers in any liquid.

6. Make sure that the switch is closed when adjusting, replacing attachments or storing electric branches, and avoids the risk of electric branches and cutting unexpectedly.

7. The idle electric pruning is trimmed in the blade closure and stored outside the child.

8. After use, the dirt should be removed first, and then the dirt should be removed first, and then the lubricating oil or oil is lubricated on the contact part, so that the blade is in a normal maintenance state. This can reduce the resistance and extend the life of the blade.

1. What is a sunbisha

The Shading can be tilted downward and the small flat plane with a rolling method with a rolling method to stretch and retract the Shading device that stretch and recover within the range of 0 ~ 15 . It is an excellent sunshade product.

What is the effect of sunshade?

1. Thorn canopy can effectively block ultraviolet rays into the room, thereby reducing the indoor temperature.In addition, the shade can also reduce the load of the air conditioner to achieve the effect of energy saving.Through the consideration of sunshade, from the perspective of saving energy and environmental protection, it is of great significance.

2. At the same time, sunshade, while blocking the hot summer, can reflect the strong sunshine into the room in the form of a long shot light, make the indoor light bright and not dazzling, and does not affect the window landscape seen from the room.The living space extends from the room to the Outdoor, creating a new living space.

3. The special ultraviolet -resistant function of the shade of the shade can not only be removed from ultraviolet rays from ultraviolet rays, but also greatly extend the service life of indoor decoration and furniture.

4. Beautify the buildings, the color of the Shading canopy is diverse, and the coffee shops, hotels, villas, tourist scenic spots and other places echo the sunbur and the surrounding environment, which has a modified effect.

Third, the classification of sunshade

1. Divide according to the driver: manual, electric, fixed.

2. It is divided into: full -box curved arms, a sun Tent, an open crawler arm -type sunshade, a swing arm -type sunshade, a sunbisper, and an umbrella.

How to make eggshell Fertilizer

1. Use eggshells to make solid Fertilizers

1. You can first wash the eggshell with water and cook it with boiling water to make disinfection effect better.

2. clean the eggshell and sun exposure under the sun. At least one week should be bask, and the water in the eggshell is completely dried.

3. After drying, use a cooking machine to break into powder. When preparing potted soil, mix some eggshell powder into the base Fertilizer, and the amount can be about 10 %.

PS: Using crushed eggshells as topdressing, you can dig pits directly on the surface of the pot soil and bury the eggshell powder into the soil.Note that when using eggshell powder as topdressing, it is not appropriate to sprinkle directly to the surface, and the hypertrophy cannot be absorbed by the root system on the surface of the pot soil.

Second, use the egg shells to make organic liquid Fertilizer

1. Broken the eggshells in the above method, pour it into the bottle, and add an appropriate amount of water.

2. There is a little more water than the eggshell, which can flood the eggshell.

3. Finally cover the bottle cap to ferment the eggshell, it takes about two months to ferment.

4. Because a large amount of gas will be generated during fermentation, the bottle is needed from time to time to breathe.

5. It is recommended to mix the eggshell with other Fertilizers. The content of the composition in the Fertilizer will be richer. In the later stages of the system, add the fruit Skin such as a single orange Skin to effectively eliminate the organic liquid Fertilizer.Smelling can also strengthen acidity ingredients in Fertilizer.

6, fermented eggshells can be used directly as flower Fertilizer.

The role of egg shells as Fertilizers

1. The content of calcium carbonate in eggshells is quite high, and the content of phosphorus is also very high. It can be regarded as a kind of phosphate Fertilizer.The role of phosphorus Fertilizer is to make the trees and stems tough, promote the formation of flower buds, large flowers, and precocious fruits, so that the trees have more new roots, good growth and development, improved cold resistance, and drought resistance.When the use of insufficient phosphate Fertilizer will grow slowly, resulting in small leaves, branches, or division reduction, small flowers and fruits, mature late, and the veins of the lower leaves will be yellow and then purple -red.

2. When trees lack phosphorus, the manifestation is usually the first disease.Organic Fertilizers with more phosphorus include Bone powder, rice bran, poultry feces, fish scales, etc.Inorganic phosphate Fertilizers include calcium phosphate, phosphorus powder, and calcium magnesium phosphate Fertilizer.Among them, the most commonly used is calcium phosphate, which is often mixed with Organic fertilizer as base Fertilizer, and can also be used as the root of flower and fruit bonsai.Excessive calcium phosphate should be used for neutral or microbians, and it is not suitable for acid soil.

Pay attention to flowers and fat with eggshells

1. Do not use the amount of flower Fertilizer with eggshells to do too much, and cannot exceed 15%of the total nutrient soil. Too much, it will affect the growth of the flower root system and the absorption of nutrients.

2. Try not to use eggshells to make flower Fertilizer as much as possible. If the operation is not good, it may also be counterproductive.For secondary fermentation, it will cause roots.

1. How to cultivate Jin Xinxiang Dragon Blood Tree

1. Change pot

Brazil's wood grows fast, consumes more nutrients, and most of the trees are small.From March to April of the early spring every year, change the basin to fertilize, remove the old plant, remove some dead old roots, replace the large number of Flower pots, add new cultivation soil, pile up Fertilizer or 4 to 5 hoof corner slices, Pour water after planting.

2. Fertilizer managementFrom June to September, every 15 days is appliedCompound fertilizerOr cake Fertilizer water, nitrogen fertilizer should not be too much, otherwise the stripes of flower and leaves will fade.Watering in the pot should be dried and wet. Generally, 3 cm deep in the pot soil is dry and then watered.Water is poured once a day in summer. The room temperature in winter is 15-20 C, and water is poured once every 5 to 7 days.

Second, the method of breeding of Jinxinxianglong Blood Tree

1. Temperature: The optimal temperature required for the growth of Xianglong Blood Tree is 20-30 C.When the temperature is lower than 13 C, the plant enters the sleep. If it is in 5 C for a long time, it will cause freezing damage; therefore, at low temperature, the trees are sprayed with trees to keep the troops warming and anti -freezing, disinfection and sterilization, and make it safe in dormant.

2, humidity: Xianglong blood tree is wet, afraid of waterlogging.Leaf growing is strong and keeps the pot soil moist, but the potting soil cannot accumulate water. The air humidity is 70 % to 80 %, and a new high -fat film is sprayed on the leaf surface.Watering should be controlled during dormancy, otherwise the leaf tip is prone to the phenomenon of leaf tip.

3. Light: The fragrant blood tree is more adaptable to light. Under the condition of sufficient sunlight or semi -yin, stems and leaves can grow and develop normally.Therefore, full -day photos can be accepted in early spring and autumn, and shade should be shaded in summer. In addition to controlling the amount of watering in the end of autumn, spray 0, 2%to 0, and 5%of potassium dihydrogen phosphate to improve its ability to cold resistance.

4. Soil:If you want to make Xianglong Blood Tree better, you must try to choose the soil that is suitable for it. It is best to use a more loose and fertile sandy loam soil.The drainability of the soil is also not good, which can prevent rotten roots due to water accumulation.You can use peat soil and river sand to prepare and use it, and you can add an appropriate amount of Bone powder.

3. precautions for the breeding of Jinxinxianglong Blood Tree

1. Pruning: Xianglong Blood Tree is resistant to pruning. It can control the height and shape of the plant by trimming. For trimming the wound, it is more injured and disinfected with corruption membrane, preventing dry cracks, and promoting wound healing.In order to make the leaf buds grow strong, the basin must be changed every spring. The new plant is changed once a year.Usually cut off the aging and withered leaves in the lower part of the bush, spray trees to prevent the infection of the bacteria.

2. Prevention and treatment of diseases and insect pests: Xianglong blood trees are generally not prone to diseases and insect pests, but when the environment is poorly ventilated, it will cause pests such as granice insects and red spiders.Usually open windows to make the balcony or indoor ventilation well to prevent pests from occurring.When the harm of pests is found, 40%oxidation music can be used with 1000 times liquid, 2.5%bromide 2000 times liquid, and an appropriate amount of new high -fat film into a mixture, which can greatly increase the utilization rate of the effective ingredients of pesticide Fertilizers.Effects more than 300%.It is best to spray the ground on the ground to spray and apply it at the same time for prevention and treatment.

1. Preparation of nutrient soil

1. Prepare materials for pile.First, the broad -leaved tree deciduous or 10 cubic cubic cubic cubic cubic cubic cubic cubic cubic cubic cubic meters, stacked into a large pile, stacked while stepping down, try to reduce the volume as much as possible;

2. Main with nutrient solution.Then use 2.5 kilograms of Urea to make Urea water from 150-200 kg of water, and sprinkle it evenly on the deciduous heap (the moisture content of fermentation materials reaches 60-70%).

3. Sprinkle with inoculation.After the Urea water is soaked, it is covered with breathable coverage on it, and naturally placed for 24 hours. The next day, the 3 kg of microbial fermented agent was sprayed evenly in the pile of broad -leaved tree leaves or crop straws and grass piles to achieve it to achieve it to achieveTurn over and spray. This process is called "vaccination" (spraying is best to use a new small waterpot or sprayer, and the sprayer of pesticides is forbidden to use it to avoid killing the bacteria).

4. Ferment.After planting, it should be covered with breathable coverage on a large pile.Under normal circumstances, after the fermentation process starts, after 3-6 days of fermentation, the temperature can reach 55-60 C. At this time, it can be turned out once, and the fermentation can be completed in total 2-3 times.

2. The fastest way to make nutrition soil

When preparation of Nutritional soil, all the materials are fully stirred and disinfected with a potion.About 15 days before sowing, open the nutritional dumplings, and adjust the soil pH to 6.5-7.0 after sieve. If it is too acidic, you can use lime adjustment; if alkali, you can use dilute hydrochloric acid to neutralize.If the soil is too loose, it can increase the cow dung or clay; when the soil is too sticky or the organic matter content is extremely low (less than 1.5%), organic compost, sawdust, etc. should be mixed with it, and then paved in the seedbed or installed in a nutritional bowl.

3. How to match Nutritional soil

The proportion of Nutritional soil commonly used in production is:

1. Seeding bed

Vegetable garden soil: Organic fertilizer: ravioli ash = 5: 1-2: 4-3;

Caiyuan soil: river pond mud: Organic fertilizer: ravioli ash = 4: 2: 3: 1;

Caiyuan soil: Colds: Organic fertilizer = 1: 1: 1.

2. Moving seedbed (nutritional bowl)

Vegetable garden soil: Organic fertilizer: blue bran ash = 5: 2-3: 3-2;

Vegetable garden soil: garbage: ravioli ash = 6: 3: 1 (0.5%each with imported regeneration, 0.5%of overlapping calcium);

Vegetable Garden Turkey: Pig and Cow Pole: Banxia ash = 4: 5: 1;

Vegetable garden soil: beef and horse dung: rice shell = 1: 1: 1 (Cucumber, Pepper).

Rotten grass charcoal: vegetable garden soil = 1: 1 (setting ball cabbage);

Corruption organic compost: vegetable garden soil = 4: 1 (cabbage, eggplant fruit);

Vegetable garden soil: sand: rotten bark compost = 5: 3: 2.

When preparation of fruit and vegetable seedlings, it is best to add 0.5%of calcium transmutative soaking out of 0.5%.The above -mentioned raw materials for the preparation of nutrients should be selected for local materials. The cost is low and the effect is good.