1. How to do a good job of garden landscape lighting design

1. Clarify the theme of garden landscape lighting

Clarifying the "theme" is not only the top priority of garden landscape lighting design, but the primary task of any design. Before doing any lighting design, you need to start from the perspective of lighting planning to determine what kind of theme is to do.Go to integrate with the landscape to express the beauty of garden landscapes.Different theme design, with the lighting effects of different scenes, create a comfortable visual atmosphere.

2. Create a unique night environment

garden landscape lighting design, as a comprehensive design that requires basic lighting and ornamental lighting, needs to decorate its unique style on the basis of respecting the basic image of the garden landscape.Under the premise of not being lingering, use good light to combine light and landscape design more comfortable, romantic and unique.

3. Improve the playability

garden landscape lighting is not just basic lighting. Due to the large flow of people, it is necessary to pay attention to the creation of the atmosphere while ensuring safety, the immersive light and shadow experience, the blending light design, the immersive light atmosphere, and the interactive people with good people to allow tourists to allow tourists to allow tourists to allow tourists to allow tourists to allow touristsTo better integrate into the environment, improve the playability of design, and allow tourists to experience the beauty of Lights more.

4. Show the beauty of ecology and nature

Through the combination of lighting and garden architecture, plants, and tourists, the visitors and the atmosphere of the entire garden are integrated, so that people are immersed in feeling the beauty of light and shadow in garden landscapes, and creating a harmonious environment of man and nature.The most important thing is to allow tourists to enjoy the sensory feast, while not losing the atmosphere of nature.This is the essence of garden landscape lighting design. It makes people be in nature rather than coming to super modern science and technology venues, so that tourists can truly relax and comfortable.

2. Common design techniques for garden landscape lighting

1. Landscape lighting lighting of water view

Water scenery is one of the components of the garden lighting project, and it is also the key lighting design part.There are many forms of garden water views. For example, there are large lake water views with wide water surfaces, as well as Fountains, streams, cement ponds, and waterfalls.The night scene lighting design method of the water surface lighting project is mainly reflected by the water surface landscaping and the railings on the shore and the lighting of trees on the water surface.Real views and reflection in water, compare each other, set off, positive and reflect, plus the dynamic landscape effect of reflection in the water, let people enjoy it.For some waterfalls and Fountain landscapes, underwater lighting can be designed, and underwater lighting fixtures of the same or different colors can be exposed through special arrangements according to demand. The effect of lighting is magical.

2. Landscape lighting of sculpture sketches

The sculpture sketch in the garden lighting project, the iconic construct, is very ornamental, and the latter is memorable.This type of lighting design should start with the main characteristics of the sculpture, especially the key parts of the sculpture, such as: head, material, expression, color and surrounding environment.The front of the front is uniformly illuminated, which can create a lighting effect of lighting, realistic, and strong three -dimensional sense.In the selection of light sources, a narrow beam lamp should be selected, and the main direction of the vision of tourists should be avoided to prevent glare.

3. Functional lighting design of garden roads

Visitors are led to various attractions from the entrance of the garden.The road is the context of the garden, and the path is winding and winding, giving people a kind of effect on steps, and the winding path.The lighting design method should be carried out closely.

4. Landscape lighting of garden trees

Trees are one of the elements of garden landscapes. There are many varieties of garden trees, and they are full of attitudes. In addition to being able to beautify the environment and provide tourists to watch, they also have the effects of regulating and protecting the environment.lighting should be treated according to the height, size, appearance characteristics and color of the trees.

1. What is smart street lights

smart street lights, also known as smart street lights, are an advanced technology such as electric wire carrier communication technology and wireless GPRS/CDMA communication technology to achieve remote centralized control and management of street lights.The main functions of smart street lights are: automatic adjustment of brightness, remote lighting control, fault active alarm, lamp cable anti -theft, remote meter -composites and other functions according to the traffic flow, which will help save electricity resources and maintain costs, and improve the management level of public lighting.

After the implementation of smart street lights, it can not only improve the management of public street lighting, but also generate certain economic benefits: secondary energy saving through intelligent regulation to avoid waste, which is conducive to saving urban public lighting energy consumption; measure energy saving data, prevent leakage and theftLosses of electricity; strengthen the construction of public lighting management informatization, and reduce traffic accidents caused by lighting or lack of lighting.

2. What is the working principle of the intelligent street light control system

The intelligent street light control system consists of software systems and hardware devices. It is divided into four layers of data collection layer, communication layer, application processing layer, and interactive layer. Through the cooperation of each layer, street lamp facility management, fault alarm, power use monitoring, and monitoring, and monitoring, and monitoring, and monitoring, and monitoring, and monitoring,, monitoring, and monitoring of electricity consumption.Functions such as street light control and mobile terminal applications can also be expanded in the later period of traffic monitoring and the intelligent function of light sensing monitoring energy.

The intelligent street light control system locates street lights and manages through the map. You can set the scheduling strategy of single Lights or a set of Lights, query street light status and historical records, real -time changes in the Running status of the street lights, and providing all kinds of reports such as street lights.

3. What are the functions of smart street light rods?

The smart street light rod is based on the lighting rod, integrated new smart devices of audio and video monitoring equipment, wireless base stations, WIFI hotspots, multimedia screens, charging piles, and weather, environment and other perceptuals.The

1. Intelligent lighting: smart street lights can automatically diminish according to the light intensity. The street lights are automatically alarm, and the smart single light/centralized controller can be used without manual operation.

2. Video monitoring: The smart light pole has the function of face recognition and license plate number recognition. It can access the criminal system, automatically alarm, active warning, etc.

3. RFID: It has RFID functions that can realize the functions of special population monitoring, manhole cover monitoring, community, municipal security monitoring and other functions.

4. Emergency call: You can install IP one -click help, video help, IP broadcast, public broadcasting, etc. to achieve the connection between the extension and the monitoring center, and the active broadcast function of the monitoring center and the outside field.

5. Sensor access: It can access various sensors, such as: noise sensor, air pollution sensor, temperature/humidity sensor, brightness sensor, real -time environmental temperature, humidity, PM2.5, wind direction, wind speed, noise, stagnant waterWait for data monitoring.

6. Wireless network: The lamp rod is embedded in WIFI hotspots, can complete the WIFI construction of the city, and can be used as an important equipment for the construction of 5G micro -based stations.

7. Information release and interaction: Using high brightness Outdoor LED screens, you can remotely replace the information of advertising content, current political news, information release and other information through mobile phones/computers.

8. Intelligent charging piles: You can complete the charging function of electric vehicles and electric bicycles. You can find appointments through the app to find the location of the pile. At the same time, there is leakage and overwhelming overload protection lighting.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. Steps of the installation process of city circuit lamps

The city circuit lamp consists of the lamp head (light source), light pole, embedded parts, mixed soil foundation, lightning -absorbing corner iron, PVC Tube, wire, cable, control box (time and space switch, exchange contactor, leakage protection device) and other parts.The installation process steps are: basic positioning basic pouring construction cable protection groove slot slot threading pipe support threading cable protection groove backfill lamp wiring street light control installation:

1. Basic positioning

The survey address is determined to determine the position of the light pole. At the same time, there is no cable, pipeline and other facilities below the excavation location. Based on the above, the high -voltage wire must be avoided, and the leaves are used to avoid the safety of the leaves to ensure the safety of construction.

2. Basic pouring construction

Dig a basic pit with the corresponding size according to the drawings, then enter the lightning -absorbing angle iron, use the concrete to enter the cushion, and then fix the embedded parts; finally put two in less than less than 30mm arc -shaped threading Tube, the threading Tube of the threading Tube, and the threading Tube.One end is placed in the center of the four screws of the embedded parts, one of which comes in in the direction of the main cable, and the other one ends in the direction of the main cable.

3. Cable protection groove slot

In the case of cement pavement or street road surface, a cable protective groove should be dug into the cement slot. The depth of the slot should be determined according to the actual situation.

4. Circuit Tube supplement

The thread is generally used for cables. One end is fixed on the guidance steel wire. The piercing rod is introduced. On the basis of embedding, there is -shaped semi -circular, which is used for wiring.The length of each round line is determined.

5. Cable protection groove recovery

The hidden project can be filled in the cable protection groove after confirming the qualification, and the layered landfilling when the backfill is returned.

6. lighting assembly

Divide the light rod to each foundation, and assemble the light rod arm on the side of the road parallel. Do not scrape the wire in the light rod during the thread to protect the cortex;Adjust the parallel degree of the light surface and the parallel surface of the light head and the elevation of the light head, and try the temporary power supply.

7. Establishing rod wiring

The vertical rod is divided into two types: artificial vertical rod and mechanical vertical rod. Pay attention not to press the French disk to the wire and cable to prevent the leakage of the Skin.Do not touch the surrounding high -voltage lines or other buildings when standing.Add the cushion under the buried nut and use nuts to fasten.Effect the light rod, the light pole must be perpendicular to the road surface.Then faste the pads of the lightning -absorbing angle iron, and the conditions are allowed to be welded to ensure that the light rod is connected to the pile with the lightning corner.Do a good job of connection between the main cable and the wire in the light rod, and do a good job of waterproof treatment. The phase wire of each lamp should be installed with a fuse. The fuse should be fixed., The upper end of the fuse should be connected to the wire, the lower end is connected to the power supply, and the lamp rod is connected to the ground wire at the same time.

8. Street light control installation

Street light control box components include leakage protection, timing microcomputer switches, AC contactors, separation switches, and electric meters. Check whether the connection is correct and whether the wiring is firm., Finally connect to the distribution box to connect the ground wire.

After the above steps, the rust -proof processing of the street light rod can be embedded in the street light rod. If the conditions are conditional, add an additional nut fastener. After the liquid asphalt is brushed, the city circuit light is installed.

2. What are the requirements for Outdoor street lights?

1. The protection of Outdoor street lights is divided into TT and TN systems, of which the TN system is divided into TN-C, TN-S, TN-C-S system.

2. The TT method refers to the protection system that directly grounds the metal shell of the street lamp steel rod, commonly known as single Lights.When the metal shell of the street -lamp steel rod is charged, the danger of electric shock is reduced by a low -voltage section. It is suitable for places where ground protection is very scattered. At present, it is rarely used.

3. The TN method of power supply system is the protection system that connects the metal shell of the street light steel rod with the working zero line. It is also known as the zero protection system of the street light connection. Once the device appears, the zero protection system can raise the leakage current to a short -circuit current to a short -circuit current.This current is very large, which is 5.3 times the TT system. In fact, it is a relatively short -circuit failure. The fuse of the fuse will melt.Safety.

4. The welding of the ground wire should comply with relevant regulations: flat steel is twice the width of its width, and at least 3 edges are welded. The round steel is 6 times the diameter. When the round steel is connected to the flat steel, the length of the round steel is round steel.6 times diameter.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. How to build garden Lights

1. Consider the scene situation

Due to the different types and planting methods of trees, flowers, and grass in the courtyard, it will affect the appliances and arrangements of light design.Therefore, make a choice of lighting according to the actual situation of the scene.

2. Refer to the water scenery

Static water Lights are generally combined with the pavilions, pavilions, aquatic plants, and cruise ships on the water to create a soft atmosphere.And water can achieve better visual effects on the mirror effect produced by these elements.

Dynamic water should combine the flow of water and use the expression of light to illuminate the dynamic beauty of water.

3. Refer to the garden road

For more spacious roads, you can use courtyard Lights directly.

Setting garden Lights on both sides of the garden road on the lush trees can not only provide lighting for the garden road, but also reflect the beauty of the garden road.

4. Consider architectural style

According to different architectural styles, different lighting methods are selected.Generally, more outline lighting can be used, which can highlight the outline of the building and adjust the light.

2. What style of the garden light is good

1. Chinese courtyard lamp

The design of Chinese courtyard Lights is mostly Chinese classical elements, which are used and modified, such as palace lamps and lantern lamps.

2. European -style courtyard lamp

The design of Chinese courtyard lamps mostly adopts some European -style art elements in European countries, and abstract expression forms. Generally, many curved lines are used to show the complex beauty of Gothic.

3. Modern style courtyard light

Modern style courtyard lighting design mostly uses modern art elements, and uses simple techniques to express, giving people a simple, simple and high beauty.

4. Antique style courtyard light

The antique garden light is a lamp that integrates modern element design on the basis of Chinese classical lamps, with both simple beauty and modern technology beauty.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; Correction & gt; & gt;

1. What are the composition of the ghost lamp?

HID pillar lamps are generally composed of lamp head (pyrine bulb), electronic rectifier (also known as stagger, stabilizer, fire cow, etc.), line group control box, etc.

1. Lantern head

There is no filament at the HID blealing lamp head. The current uses a current between the electrodes to promote the brightness of the pyrum molecules to generate brightness. There is no problem of tungsten filament burning (none of the tungsten wires can be called a pyrine lamp).

2. Electronic rectifier

After using the DC voltage of the battery 12V, after a series of conversion, control, protection, voltage voltage, frequency conversion and other actions, it generates an instant 23000V ignition high voltage to ignite the lamp head.There are about 4A working current.

3, line group

Generally made of flame retardant materials. By increasing the cross -sectional area of the power cord, the current passing capacity is improved to ensure the normal work of the HID pyrine lamp. Some H4 models of the airlight lamp with the relay line group for work control.

2. How to install the ghost lamp

First of all, take off the front lamp before, and then find the same type of hernia bulb as it.And before installation, install a stable, which is conducive to the stable operation of hernia lamps.Then lead the light line in the car out of the dust cover. Because most of the cars have gaps, the sealing work needs to be done after the leading line, so that the hernia bulbs are installed.

In fact, the installation of hernia lamps is simple and the operation is not complicated.However, in order to drive in the future, it is recommended that you find professional personnel for installation.