1. Obstacle lighting

Install the lighting on the building for obstacles.Such as the flying obstacle logo on the top of the high -rise building, the navigation obstacle logo lamp installed on the buildings on both sides of the channel.Obstacle lighting should use lamps that can transmit red light. When installing obstacles, the following requirements should be met:

(1) General high -rise buildings only install obstacle lighting at the top, buildings with large horizontal area or intensive high -rise buildings, in addition to installing obstacles at its highest top, but also equipped with obstacle Lights on the top of its outside corner.Items

(2) The height of the chimney is more than 100m. In addition to installing obstacles at the top, an obstacle light should also be installed at a height of one -half.In order to reduce the degree of pollution of the barrier light at the top of the chimney, the obstacle light can be set lower than the 4-5m of the chimney mouth.In order to ensure reliability, the three obstacle Lights are generally installed into an equivalent triangle so that one of the obstacles can still see the light from the direction of the direction.

2. What are the aviation barriers

Aviation obstacles are special lamps that identify obstacles.The light -strong aviation obstacle light is Changliang. The mid -light strong aviation obstacle light and high -light strong aviation obstacle light are flashing. The flash frequency is not less than 20 times per minute and 70 times per minute.

Aviation obstacle Lights are generally divided into three types: low light, strong light, and high light strong. The vertical and horizontal distance between the aviation obstacle Lights is greater than 45 meters and its facilities. The three obstacle logo Lights can be used with each other.

A clear warning effect.

3. Under what circumstances must set up aviation barrier Lights

Aviation obstacles are special lamps that identify obstacles.The function is to show the outline of the structure, enabling the aircraft operator to judge the height and outline of the obstacles, and play a lamp in a warning function installed on the obstacle.

In order to distinguish the lighting Lights of general uses, the aviation barrier Lights are not often on but shiny. The low -light and strong aviation obstacle Lights are often on.It is less than 20 times per minute, not more than 70 times per minute.

Aviation obstacle Lights are generally divided into three types: low light, strong light, and high light strong. The vertical and horizontal distance between the aviation obstacle Lights is greater than 45 meters and its facilities. The three obstacle logo Lights can be used with each other.

A clear warning effect.

Situation 1: The high -protection of the airport is high or the ultra -high buildings and structures should be set up. All aviation obstacles and signs should be set up.

Situation 2: For artificial and natural obstacles that affect the safety of flight safety on the route and the flight area, aviation obstacles and signs should be set up.

Situation three: For the tall, tall buildings and facilities that may affect the safety of the flight, you should set up an aviation obstacle light and logo and pay attention to maintaining normal working conditions.

Fourth, setting distribution of aviation barriers

1. Obstacles The highest point and edge of the obstacle to the setting of the obstacle light (ie, the height and the width) of the obstacle.

2. If the top of the object is more than 45 meters above the ground on the ground, an obstacle light must be added to the middle layer.Consider the intermediate layer to add obstacles).When the building is equipped with an intermediate barrier light near the urban and residential areas, it should be considered to avoid making residents feel uncomfortable.It is generally required to see the light from the ground.

3. The obstacle lamps set up by the vast building complex should be seen from all aspects of the outline of the object. The horizontal direction can also be set at a distance of about 45 meters.

4. For 105 meters of ultra -high objects, facilities, or pull towers, roof tower, etc., the light -strong A -type obstacle light at the top should be set on its top, and the white flash should be set.lamp.

5. Ultra -high objects above 150 meters (such as radio and television tower, large crossing cable bridge, etc.) shall be set up at the top of the highlights and strong A -type obstacle Lights, and it should be used in conjunction with the middle and high -light strong obstacles.

6. The tower of the ultra -high voltage transmission wire should be set up with a high -light strong B -type barriers and a three -layer synchronous flash.The position of the tower is the minimum drooping point and the middle position of the two, and it needs to be located along the direction of the cable.

7. For chimneys or other similar buildings, the top obstacle light must be between 1.5-3 meters at the top. Considering the pollution of the chimney to the lamp, the obstacle light can be installed in the area below 4-6 meters (detailsSee the National Standard Festival).

8. Regardless of the obstacle light, the number and arrangement of the obstacles of the obstacles at different heights should be seen from the outline of the object or object group from all directions, and the synchronous flashes of the obstacle light should be considered to achieve an obvious warning effect.

1. How much watt is fit in the courtyard

1. Look at the installation environment

The courtyard light in the community

The main consideration of installation of courtyard Lights in the community is functional lighting, which is convenient for residents to go out at night and safety guarantee at night. Therefore, the number of courtyard lamps in the community is generally around 30W, generally not more than 50W.

Private courtyard light

The private courtyard light pays more attention to the aesthetics, so you can start from the owner's own needs. If you want a romantic and private courtyard, then the Watshu is lower.You can choose the courtyard light of about 50W.

2. Look at the light source

Solar courtyard light

The typical lamp head of Solar courtyard is 6W and 9W, and the maximum power is 12W.

LeD courtyard light

LED courtyard lighting source power is larger than Solar courtyard Lights, with a minimum of 20W and a maximum of 100W.

2. How many meters of courtyard Lights

The lighting spacing of the garden Lights is related to the style of the light, the height of the light rod, and the tile of the lamp head. The installation distance of the grass lamp is relatively short, because its lighting distance is relatively small, and the lighting distance such as Wall lights and street lights is relatively large. The installation distance is installed distance.It can be bigger.

For example: 40 watts of LED lamp heads, about 6 meters, about 15-18 meters; 60 watts of LED lamp heads, 8 meters lamp rods, about 20-24 meters; 80 watt LED lamp head 12 meters 12 metersThe lamp rod interval is about 32-36 meters.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; Correction & gt; & gt;

1. The difference between Landscape lights and courtyard lamps

1. Different concepts

First of all, Landscape lights are a more traditional concept. It includes lawn Lights, underwater Lights, step lamps and courtyard Lights. The courtyard Lights are actually a type of Landscape light.

2. Different uses

The Landscape lights mainly play the landscape effect, which can be in squares, parks, courtyards and other places; courtyard Lights mainly play a role in lighting, mainly used in courtyards.

3. Different effects

The Landscape lights are more pursuing the color of the appearance of the lamps and the effects of night view lighting effects. Many people like Landscape lights because of its various design and the color of the Lights is also different.Lights can be viewed at night.

The garden Lights value the neatness of the lamps and the effect of night lighting.In other words, the design of the garden Lights does not require a variety of diverse, and sometimes it is as simple as possible.The courtyard Lights are mainly consistent with the style of garden or community, so that it can give people a more coordinated and comfortable feeling.

4. The complexity of production is different

The design and process of Landscape lights are very complicated, and the garden Lights are relatively simple.

How to choose Landscape lights

1. Use according to actual use

The types of Landscape lights are diverse, but not every one is suitable for any scene. It needs to be analyzed according to the actual scenario, and then choose to buy.For example, if you want to light up the lawn, you choose a lawn Landscape light. The simple guidance is mainly to show the beauty of the lawn at night.If it is to increase the sense of design, then choose the garden landscape light. Most of the garden landscape Lights are in line with the decorative effect and are suitable for any decorative scenario.

2. The style should be coordinated with the style of the community

Pay attention to the coordination of the style of Landscape light and the overall style of the residential area.If it is not consistent, it may make people feel abrupt and affect the aesthetic effect.However, everyone's preferences are different, but they must try to fit the community style as much as possible to choose what they like.

3. The power supply method should be appropriate

There are generally two types of power supply methods for Landscape lights: one is the common 220V power supply method, that is, it needs to be connected to lighting with a wire, which is more troublesome.The other is the power of solar energy, that is, Solar courtyard Lights, which is more energy -saving and environmentally friendly and easy to use, but the price is relatively high.You can choose according to your own needs.

4. The lightning protection coefficient should be high

Because the Landscape lights are installed outdoors, it is often under rain and sun, so it is necessary to choose good protective performance.Generally, the garden Lights have rainproof structures, but you should also pay attention to check whether there is a lightning protection coefficient in the parameter when buying, or consult a manufacturer.The lightning protection coefficient is low, it is easy to damage, and it will even cause fires in severe cases, so try to choose Landscape lights with high lightning protection coefficients as much as possible.

5. The light source should be warm and comfortable

The Landscape lights are basically turned on at night, and the temperature is relatively low at night.The warm and comfortable light source can make people feel better and help create a warm home life.It is recommended not to choose a cold light source.

6. Good Sun protection and anti -freezing performance

The Landscape lights are outdoors all year round. It is necessary to resist summer sun and cold in winter. This requires it to have sunscreen and anti -freezing properties.

7. brand selection

Now there are many Landscape light brands on the market. It is recommended to choose regular ones when choosingLandscape lampbrand, ensure good after -sales service and quality.

1. What is the landscape lamp

The Landscape light is an indispensable part of modern landscape. It not only has high ornamentality itself, but also emphasizes the coordination and unity of the landscape of art lamps, the historical culture of the scenic area, and the surrounding environment.Landscape lights use different shapes, different light and brightness to create landscapes.For example, the red light lantern -shaped Landscape light brings a festive atmosphere to the Square, and the green coconut lanterns set up a tropical style at the edge of the pond.Landscape lights are suitable for landscape places such as squares, residential areas, and public green spaces.

two,Landscape lighting LanternWhat are the

1. Large -scale scene lamp:The height is 4-8 meters, and it can be used as a sculpture during the day. The dual effect of lighting and lighting at night is available to set off the people's space atmosphere.

2. Landscape street lights: Generally, the height is 6-12 meters. The height of the street lights needs to be coordinated with the road width during specific operation.

3. Garden Lights: 2.5-4 meters in height, rich in style, mainly used in residential areas and some scenic spots.

4. Lawsticks: The height is 0.5-0.8 meters, which is a decorative lamps. It has the function of auxiliary lighting for some areas with low lighting.

5. Buried lamp (buried lamp):There are also rounds in appearance, mainly buried on the ground, used to decorate or indicate the use of lighting, and some are used to wash walls or trees. Its applications have considerable flexibility.

6. Tree lamp: It is installed around the trees, and there are few lamps dedicated to this. Buried Lights and Lights can achieve this effect.

7.Underwater lightTheGenerally installed in the aquarium environment such as pools, Fountains, swimming pools, etc., you can provide special underwater lighting effects for these places.Underwater Lights can use a variety of colors and light sources to combine different lighting effects.At the same time, underwater Lights can also help people better observe creatures and plants in water, and enhance the fun and attractiveness of the aquarium.

8. Step lamp (side Wall lamp): The first is used for the steps of the staircase, and the small -scale part of the lighting makes people see steps and roads, which also set off the effect of the steps.

9. Wall lamp:The lighting equipment installed on the outer wall of the building can not only provide lighting for the building, but also play a role in decorating. In cultural sites, historical buildings, and high -end commercial blocks, Wall lights are widely used.

10. Vote the light: As the name suggests, the light is projected to a specific part, highlighting the key lighting,It is usually used in building lighting, Square lighting and sculpture lighting.

11. Public light: The light is scattered and attributed to the sources of the face.

12. Linear light: The power of the light source is not very large. It is often used in groups to outline large strip -shaped light.

1. The role of lawn Lights

1. lighting night

In the courtyard, in some public places, after using the lawn Lights, it can increase a little brightness at night, thereby showing the effect of litting nights.For people who walk at night, don't be afraid of dark paint night, walking is smoother, and it also plays a certain safety performance.

2. Decoration city

The light of the lawn Lights is softer and the colors are more diverse. Now with the continuous follow -up of design, people's needs are continuously improved. The current design has more shapes and the shape is ideal.In the evening, it is also very beautiful and generous, giving people aesthetics.The lawn Lights add a lot of safety and beauty for the most unique design and softest Lights to the green space landscapes throughout the city, and its installation process is very simple, easy to install, good decoration effect, usually used in parks, garden villasWaiting for the lawn, of course, modern commercial streets, pedestrian streets, parking lots and squares will be installed with a lawn light if there is a green Belt.

3. Anti -theft effect

Now there are Solar lawn Lights. It has a lot of use. It is a kind of lamps that make full use of solar energy. When used, it does not need to consume electricity. The efficiency is relatively high. This product uses solar energy.need AC power supply solves the contradiction between the product's insufficient brightness and the strong light time, which greatly improves its utilization efficiency.This Solar lawn light also has the function of automatic alarm, which can play a more ideal role of anti -thief and protect people's life and property safety.

Second, the main characteristics of lawn Lights

1 High brightness: now the new type of Solar lawn light can be adopted 140LM / wled Light source, more than conventional solar energy led Lawn lamp 50 %,

2 , High -quality and high reliability: The lawn Lights have high quality requirements. Manufacturers must choose advanced equipment, good materials to ensure quality, and check the materials for full inspection, grasp the quality of each production process, inspection of finished products, shipments, shipmentsInspection, strictly follow ISO The requirements of the quality management system are fully quality management.

3 Long life: the overall life of the lawn light 20 For more than years, the high -light glass layer pressure process is adopted. The design life of each accessories is consistent. The unique energy -saving design, the battery life is longer than the conventional technology 2 3 Times.

4 , Energy -saving: If it is a Solar lawn light, the generally used foot power crystal silicon Solar battery components are used as the power generation system for lamps. 3-5 In the evening, no other energy supply is required.

5 Automatic control: The lighting and extinguish of the Solar lawn light uses Solar light induction control, that is, the light control function, and at the same time, there is a energy -saving mode. In the case of less pedestrians at night, the output power of the light source is automatically reduced to save power.

6 High safety: Solar lawn Lights are low -pressure products, using DC 4V or 6V power supply, safe and harmless, effectively protect children, pedestrians and animals.

7 The lamp body adopts high -strength structural design, with high waterproof, wind resistance, and high external force.

8 Ease of installation: independent power supply, no need to set up or embedded power transmission lines, simple construction, low construction costEssence

3. What is the height of lawn Lights generally

Different specifications such as 600mm, 800 mm, and 1000 mm of lawn Lights can be customized according to actual needs. Any specifications can be made.The main materials of lawn Lights are equal steel pipes, heterosexual steel pipes, aluminum pipes, cast aluminum lawn Lights, aluminum alloy lawn Lights.Common diameters include 60, 76, 89, 100, 114, 140, 165. Depending on the height and the place used, the selected material thickness is divided into: wall thickness 2.5, wall thickness 3.0, wall thickness 3.5.Lawsticks usually use 36W or 70W golden halide lamp sodium lamps, and the layout spacing is generally 6 to 10 meters.