1. Common faults and maintenance of Solar street lights

With the gradual adjustment of my country's energy structure, Solar resources are widely used. Solar street lights are street lights using Solar lighting. During use, there may be some faults. The following is a common failure and maintenance method for Solar street lights:

1. The whole light is not bright

Solar street lights are Outdoor lighting. They often encounter high temperature or rainy conditions, low temperature or rainy weather, etc. The controller of Solar street lights is usually insidePhenomenon.First check whether the wiring site of the controller has water traces or rust. If so, it is likely that the controller has been damaged. If there is no battery voltage measurement, such as 12V Solar street light power supply system, the battery voltage is lower than 10.8V, the battery has been storage.No electricity, you need to replace it.Check if there is voltage and current output under normal working conditions.If there is no, the batteries are damaged and replace the batteries.There is no problem in the above, you should check the light source. Only the light source is connected to the power supply. See if it Lights up, the light source is replaced without light.

2. The lamp head flickered

The cause of this failure is poor, the battery is lost in power, the battery is lost, and the amount of power storage has been severely reduced. If the line is fine, the battery is replaced.

3. Short lighting time

Generally, it is caused by rainy days without the sun. If the rainy day durates short, it is usually caused by the decline in battery storage power and insufficient power storage capacity.

4. The source of Solar street lights is not bright

Many Solar street lights use dot matrix LED light sources. Except for the quality problem of LED light sources, some lamp beads will cause this situation.The solution is to replace the corresponding lamp beads, welded firmly or replaced the entire street lamp head.

Second, the Solar street light is broken

Solar street lights are working outdoors. Even if the quality is good, it will inevitably fail. So who should I find if it is found that the Solar street light is broken?

Generally speaking, the Solar street lights are broken, depending on where the Solar street lights are installed:

1. If the Solar street lights on the municipal road are broken, you can contact the local municipal street light management department to let the street light management department go to repair.Essence

2. If the Solar street lights in the community are broken, you can contact the property department to let the property be repaired.

3. If the Solar street lights of the scenic area or Park are broken, they can generally report to the staff center or Park management office to report to the staff, and they will send people to repair it.

4. If the Solar street lights in rural areas are broken, as long as you buy Solar street lights produced by regular manufacturers, contact the manufacturer. The manufacturer will send professionals to contact the person in charge of the village.If the user cannot solve it, they will send professional and technical personnel to help solve the situation where the street lights are not turned on.

1. What is the principle of Solar lighting

Under the trend of environmental protection, solar energy has attracted much attention as a clean energy source. Solar lighting is a lighting system that uses solar energy as its main energy. It is of great significance to ensure energy safety and sustainable development.Many friends don't know much about the working principle of Solar lighting. Let me introduce how solar energy is lighting:

A complete Solar lighting system includes Solar cell panels, lithium batteries, Solar micro -computer control boards, and LED light sources. When work starts, Solar panels are responsible for converting the absorbed solar energy into electrical energy.Electric energy is stored in a lithium battery; the Solar micro -computer control board will automatically automatically recognize the day or night according to the strength of the light. When the light is insufficient, the LED light source will be automatically powered on, thereby emitting light lighting.

2. What are the advantages of Solar LED lights?

Solar lighting is a new type of lighting. Compared with the traditional lighting method, its advantages are obvious. The advantages of Solar lighting are mainly:

1. No need to be wiring

Solar LED lamps directly use the electricity lighting generated by the power generation of Solar panels. It does not need to be used by municipal electricity to reduce the cost, labor and trouble of wiring.

2. Intelligent control

Solar LED lights usually use intelligent control mode. The method of remote control light induction can be set. It can be set for how many hours of lighting Lights. You can also set the automatic mode. Through the light, it automatically Lights light and automatically turn off the light.

3. Safe and stable

Solar lamps are basically low -voltage 6V and 12V. They do not use high -voltage electricity. It is more secure and stable.

4. Low use cost

Although Solar LED lamps are more expensive than ordinary lamps, only the cost of purchasing and installation. Generally, the cost of high -quality Solar lamps is quite low. The demand for electricity is small, and it only needs to be repaired regularly.

5. Energy -saving and environmental protection

The light source and calories generated by Solar lighting are used by the sun irradiation. It is a green and environmentally friendly clean energy source. It reduces the burden on national energy consumption and has great benefits to environmental protection.

In general, the Solar lighting system is a better way of lighting. With the development of technology, I believe that the future Solar lantern will be more advanced.

1. What street lights are Solar street lights

Solar street lights use crystal silicon Solar batteries to power. The maintenance valve controlled sealing battery (collagen battery) storage electricity is stored. The ultra -high -bright LED lamps are used as a light source and controlled by intelligent filling controller. It is used to replace traditional public power lightingStreet Lights.Solar street lights are composed of several parts such as LED light sources, Solar cell panels, batteries, battery insulation boxes, Solar street light controllers, street lights, and auxiliary materials wires.

The working principle of Solar street lights is: Under the control of intelligent controllers, Solar cell panels absorb Solar light during the day and convert into electric energy, charge the battery pack, and provide electricity to the LED light source to power the LED light source at night.Electricity can be stored to ensure the normal work of rainy weather.

2. How much is a set of rods in Solar street lights?

The price of Solar street lights is affected by factors such as the height of the light pole, the light of the light head, the power of the power, the length of the lighting time., Lantern flange sleeves, basic embedded parts and built-in wires, ranging from about 2500-1000 yuan according to the configuration.For example, a 6 -meter -high, 30 watts of Lights, and 6 hours of light per day. The price of such Solar street lights is about 2400 yuan.(The above price source network is for reference only)

3. How to choose a more cost -effective Solar street light

1. Look at the detailed configuration

The configuration of Solar street lights with relatively high cost is relatively reasonable. Solar street lights look at the basic configuration mainly depends on the power of the lamp, the capacity of the battery, the size of the battery plate, the material of the light rod, etc.Buy products with virtual capacity.

2. Look at the needs of the road

Solar street lights need to determine the height and distance according to road needs. First of all, you need to know the width of the road used in Solar street lights, so as to choose a single arm or Solar street light; secondly to see the interval between Solar street lights, the power of the choice of lamps needs to be reached.What brightness is; in the end, it depends on the height of the Solar street lights to determine the size of the lamp power and brightness.

3. Look at the quality guarantee time

Under normal circumstances, the warranty time of Solar street lights is 1-3 years. The longer the warranty time, the more guaranteed the quality of the street lights, but the price will be relatively high.

4. Look at the brand

To buy Solar street lights, you should pay attention to the strength and reputation of brand manufacturers. This can be understood by online query methods. You can go to each brand to consult to understand the specific strength of the manufacturer.

1. What is the reason for Solar street lights

1. The reason why Solar street lights can be turned on is mainly because there is a battery, and there are three types of batteries. One is a lead -acid battery. Its service life is only two years.The life of colloid batteries is relatively long, which is about three years.Many Solar street lights now use lithium batteries. The maximum service life can reach about 6 years. If the lead -acid battery is selected, it may occur after one or two years.Not lighter failure.

2. It is also possible that the controller of Solar street lights is damaged. After wind and rain, lightning strikes or other reasons, the controller cannot run normally.

3. It may also be that the light source of the lamp head is damaged. If it is not artificially damaged, it may be that the battery is damaged or other natural reasons cause the Solar street lights to not run normally, and there is a problem of not bright or flickering.

4. The last reason is that the line has aging. This phenomenon is also more common. The aging lines have disconnected, and Solar street lights cannot work normally.

2. How to repair Solar street lights

1. The best choice for the installation Solar street light battery is the lithium battery. The service life is relatively long. When installing, you need to pay attention to the voltage and capacity of the battery. At the same time, you need to debug after installation.

2. If the controller is damaged, the original controller should be removed, and then the same type of matching controller is selected, and debugging is required.

3. If the light source of the Solar Lamp head is damaged, it can only be replaced, and the welding should be firm. At the same time, pay attention to repair the line.

The above introduces the reasons and maintenance methods of not bright Solar street lights. The Solar street lights may not be on. It may be that the battery life is short, controlled damage, the lamp head damage, and the line aging. As long as the reason is found, the maintenance can be corresponding.

1. The advantages and disadvantages of Solar street lights

Solar street lights are used to power the light energy through the Solar circuit board to power the lamp. This kind of energy -saving and environmentally friendly street lights are used more and more. Is Solar street lights easy to use?

1. The advantages of Solar street lights

(1) The installation is easier: The initial laying cable of the conventional street lighting project is a very difficult basic project. First, the excavation of the wire ditch, the launch of the wire Tube, the internal pipeline, the earthwork backfill, and the vegetation recovery.Then carry out long -term installation and debugging. If there is any problem with any line, the inspection work is more complicated, and a large area of rework may be required.Strict requirements for terrain and lines, high auxiliary materials and labor costs.The installation of Solar street lights is relatively simple and cheap: When installing solar energy, you don't need to lay complex lines. You only need to make a cement base, and then install the light rod.

(2) Low use cost: The daily use of conventional street lights requires high electricity costs. It is necessary to maintain or replace the lines and other configurations for a long time, and the maintenance cost increases year by year.Solar street lights do not require electricity bills, only one investment is required, and there is basically no maintenance cost in the later period, which has benefited for a long time.

(3) Safety: Conventional street lights have hidden dangers in terms of construction quality, aging materials, abnormal power supply, and conflict of water and electric pipelines: Solar street lights use 12V low -voltage power supply, operate safe and reliable, safe and reliable, no energy saving, no consumption, green, green, green, green, greenEnvironmental protection, easy installation, and automatic control of maintenance exemption.

(4) Energy -saving and environmental protection: Solar street lights use Solar light as the source of energy, without consuming conventional electrical energy, solar energy is inexhaustible clean energy, which is in line with the state's national policy that advocates green, energy saving and environmental protection.

2. The disadvantage of Solar street lights

(1) High cost: The initial investment in Solar street lights is large, and the total cost of a Solar street light is 3 or 4 times that of the same power conventional street lights.

(2) Low energy conversion efficiency: The conversion efficiency of Solar photovoltaic batteries is about 15%to 19%. In theory, the conversion efficiency of silicon Solar cells can reach 25%, but after actual installation, the efficiency may be reduced due to the blocking of the surrounding buildings.Essence

(3) Affected by geographical climatic conditions: Due to relying on the sun to obtain energy, the local geographical climate and weather conditions directly affect the use of street lighting.The rainy days will affect the lighting Lights, causing the illuminance or brightness to meet the requirements of the national standard, and even the Lights appear. Because the light is insufficient during the day, the light time at night is too short.

(4) Low life and cost -effectiveness of components: The price of batteries and controllers is high, and the battery is not durable enough. It must be replaced regularly.

(5) The brightness is relatively low: Compared with the city circuit light, Solar street lights are usually half -power or lower power, low brightness, and the general illumination range is 6-7m.The need for roads and main roads.

2. What road is suitable for Solar street lights

The advantages and disadvantages of Solar street lights are obvious. When used, it can avoid strengths and avoid weaknesses, so that Solar street lights can better play.Generally suitable for installing Solar street lights:

1. Highway street lighting in rural areas, towns and villages

Solar street lights use LED street lights. The advantages of environmental protection and energy saving, low maintenance costs, and non -municipal film interruptions have made rural Solar street lights a landscape of new rural areas.

2. Urban squares, parking lots, school playgrounds, workers' green space, Park lighting

Large -scale urban street lanterns need long -term lighting to consume a large amount of city electricity.Solar street lights use LED street lamp heads, such as energy saving and power saving.Therefore, replacing the city circuit Lights of these places with Solar street lights is a very effective way of energy saving.

3. lighting of golf stadium, seaside bath, high -end villa area and other lighting

The lighting of golf courses, seaside baths, and high -end villa areas often requires Landscape light decoration. Now the Landscape lights can also be powered by Solar panels. The Solar landscape street lights produced are perfectly combined with technology and art, highlighting the beauty of the times.

4. Highway warning signs, bridge street light power replacement

Highway warning signs and bridge street lights replace them into Solar street light products, which can continue to effectively supply power on highway warning signs and bridge street lights, and do not need to maintain it frequently, saving a lot of maintenance costs.