CD frame classification

1. CD frame is divided by material

It can be divided into three common types: plastic CD frame, wooden CD frame, and metal CD stand.Materials for audiovisual racks are generally wood and metals (with iron, aluminum alloy, etc.), especially the most materials of iron, generally can be seen in audiovisual stores and supermarkets.

The audiovisual rack with iron as the material is divided into plate -type audiovisual racks and mesh audiovisual racks:

Plate -type audiovisual rack: Generally consisting of pillars, layers, left brackets, right brackets, and separated strips. There are main frames, attachments, single -sided, and double -sides.

Net audiovisual rack: Generally consisting of pillars and layers, fixing with screws; structural is simpler than plate audiovisual racks, no differences in main and attached frames, and can not be extended infinitely between the frames. ThereforeThe low audiovisual rack.

2. CD frame according to the type of use

It can be divided into two types of land with CD frames and cases for CDs.The CD rack is placed on the ground, like a CD frame like a cabinet shape; the CD rack is used on the desktop with a CD frame.

How to choose a CD frame

1. Select according to the placement position

If you place it on the corner and the ground, you can choose to use the CD frame; if you place it on the desktop, you can choose the CD frame of the case.

2. Select according to the number of CDs

The size of the CD frame is large and small, and the appropriate size should be selected according to the quantity when purchasing.

How to make a self -made CD frame

Material preparation:

Old hard paper shells (carton), steel needle, cutting knife, ruler, pen.

step:

1. Take 11 centimeters on the left and right in the middle of the hard paper shell (or carton), draw the line with a pen, and then leave the white on the top, draw the top line, and pay attention to the number of single numbers.

2. Use the paper knife to cut the paper shell along the horizontal line, and then turn the paper shell to pultry the line.

3. Push the horizontal grid from the front extended line every other.

4. Put the four corners of the upcoming homemade CD rack with steel needles, then put on the rubber band to fix it. Finally, you can dress appropriately. This can be completed by a homemade CD frame that can be installed before and after.

Reminder: Generally, the length and width of the CD box are 12 cm. When the CD frame is made, the width must be slightly wider than that of the CD box.

[Filem Stocks installation] What are the precautions for the installation of shelves for the installation of the shelves of the shelf?

What is the installation step of the shelf?

1. Preparation Tool

What are the installation steps for shelves now?Xiaobian first introduced the installation steps of the shelf storage shelf is a preparation Tool to allow everyone to face the problem calmly.So, do you know what the tools you need to prepare in this shelves are prepared in the installation steps?During the installation of the shelf, there are very few types of tools that need to be used, but one or two of them are not tools that ordinary families will use.In the installation steps of the shelf, the tools you need to prepare are wrenches, pliers, and electric diamonds.

2. Planning

The installation steps of the shelf are planned, which is one of the very important steps.There are many places for the installation of the shelves. You can operate the specific requirements of your home, such as installing it in the kitchen. Then, everyone must pay attention to its height and distance from the distance from them.It will increase your troubles in the process of cooking.During the installation of the shelf, everyone should pay attention to the size planned on the wall, and punch a punching according to the specific parts of the product. It is best to use things to mark it.

3. Observe the wall

What are the installation steps for shelves now?Xiaobian will introduce the installation steps of the shelf in the shelf is to observe the wall.Everyone may ask, what is the relationship between this wall and shelves installation?Everyone knows that in some people's homes, in their own decoration, the entire space may be planned again, and some hollow walls will be used. Such walls, the nailing power is very bad, so that their plants can not be placed.Therefore, everyone must check their walls during the installation process and install the shelf to install it on the solid wall.

4. Specific operation

The next shelf is installed to put your own products, one time, according to the relevant drawings, punching on the planned wall, and then fixing it with a nail.If everyone still wants to install the shelf to install the side of the hollow wall, everyone should first add the hollow of this wall to make it more nail, and then install it according to the relevant product drawings.Finally, the installation steps for the shelves that everyone needed to fix their products and fall from the air.

5. Summary

What are the installation steps for shelves now?Steps for the installation of the shelf, I will introduce it here. I believe that everyone can learn a lot of this step through this information and information.In fact, the installation of the shelf is still very simple. As long as everyone can be careful, then you can install any places you want to install in your home.If you still have questions about the installation steps of the shelves, it doesn't matter. As long as you can always focus on this website, you can know it very detailed.

precautions for the installation of shelves

1. Check out its model carefully before installing. It is better to check its size and overall number. Finally, check whether the surface is damaged. If so, you can apply for replacement.

2. The use of shelves is relatively flexible. It is clearly determined to be installed. If the indoor space is relatively large, you can be a bookshelf. If the indoor space is small, you can place some cosmetics or gadgets.

3. Pay attention to the problem of the material and installation of the shelves. The load -bearing capacity of the shelf is limited, and the overweight items cannot be placed. During the construction, the embedded parts should be made in advance according to use.

[House rack in the bathroom] Which material of the bathroom shelf is good for the bathroom shelf, how to buy the shelf in the bathroom?

The shower room setting rack is generally combined with a bottom plate and a pillar to form a shelf, which is mostly supported by the strip bracket. The bottom plate is supported. The shape is unique, the design is smart, the loading and unloading is simple, clean and beautiful, and open design.storage at a glance.

Which material is good in the bathroom?

1. glass bathroom stand rack

Features: General glass racks are made of tempered glass.Not only is styling and simple, but also easy to clean, but to avoid strong impact on the glass surface.

Cost: high

2. Plastic bathroom shelf

Features: The plastic bathroom rack has the characteristics of corrosion resistance, anti -aging, rustless, non -toxic, odorless, high pressure resistance, light weight, simple construction, etc.

Cost -effective: low

3. Stainless steel bathroom shelf

Features: The stainless steel bathroom rack has the case that does not cause corrosion, erosion, rust, or wear.Because stainless steel has good wear resistance.Therefore, it can keep the integrity of the structural component engineering design and lasting time.

Cost -effective: medium

4. Alloy bathroom standing rack

Features: The alloy bathroom rack is a metal with metal characteristics composed of two or more metals or non -metals. It can be decorated in a bathroom of various colors and has a better decorative effect.

Cost -effective: medium and high

How to buy a shelf in the bathroom?

1. When installing the rack, be sure to consider the entire layout and the needs of our daily life to install. In the bathroom, the shelf is mostly used in the shower room.Set up.When using a partition shower room, consider how much you put things and the location when installing the rack.

2. The bathroom room is a relatively small place in our family, so the installation of the rack must save space and use the location in our space reasonably.

3. When buying the rack, you should observe whether the base of the rack is firm, especially whether there is a shaking when pushing the pull.

4. The choice of rack materials, because the bathroom has been in a humid environment for a long time, should focus on the selection of racks that are not vulnerable to moisture and rusty and rotten materials. It is recommended to use stainless steel and alloy and other racks.

5. The actual use and load -bearing capacity selected by the rack. The most fundamental of the shelf is its load -bearing ability. Generally speaking, you can see the actual storage of the residents;Essence

6. Choose a rack to match things in the bathroom. Generally speaking, it is necessary to consistent with the color tone of the three -piece bathroom set to ensure the unity of the bathroom style.

[Partition Wall] How about the design of 10 creative wall partition design of the GRC light partition wall

How about GRC lightweight partition wall

This means "enhanced the material with alkali -resistant glass fiber, with low -alkali high -strength cement mortar as the tunnel material, light -quality inorganic composite material as the aggregate, and the national JC666 standard is executed;" GRC has thin components, high Telescope, alkali, alkaliLow degrees, the free expansion rate is small, the small cracking resistance is reliable, the quality is stable, and the moisture -proof, thermal insulation, non -burning, sound insulation, sawing, diamond, nailing, shaved, chiseling, and flat walls are simple to avoid wet operations.Improve the construction environment, save land resources, and reduce the load in the building lightly (1/6-1/8 of clay bricks) to reduce the foundation and beams and reinforced steel concrete, reduce the construction price of the project, and expand the area of use.It is the best material for the replacement of clay bricks for non -inherited heavy parts. In recent years, it has been widely used in recent years. It is a new type of light wall material recommended by the National Building Materials Bureau and the Ministry of Construction.Because the CRC light -quality partition is installed in the non -inherited weight of the building, the required installation parts are where the largest span and deformation and the weakest anti -load load capacity are all. Because the mouth slot of the light obstacle wall plate is assembled and Smooth, the surface is Smooth.The particularity of the board is easy to cause cracks in the connection between the board and the plate, the plate, and the doors and windows. When the load is concentrated, it will cause the light wall board to vibrate and deform.Hurrying, opening, splitting, equipment installation, surface plastering quality problems, etc. have proposed new topics and proposed some preventive measures.

10 creative wall partition design

The design of the wall partition has always been valued by housewives because of saving ground space.But how can the wall storage become creative.In fact, the wall partition of the design may be a highlight of the room. Today, let's take a look at these bright wall partition design.

This white Storage rack looks very simple and beautiful as a whole. The one -shaped partition is matched with a rectangular partition. It looks very bright, and the decoration has a strong sense of fashion. This type of shelf is suitable for fashion style home improvementOr a simple style home space.

The white wall is paired with a white storage frame, so that the overall effect of the matching is elegant.Without so many hue, the creation effect is also simple. If you are pursuing a simple type of people, then such racks are very suitable for you.

Red and black have always been classic matching. In this barrier, it is also well reflected. On this shelf, we can see that the size of the large Square and rectangular shelf is uniform, in the personality of personality, in the personality of personalityYu also reflects the overall harmony.

The light green background with white shelf looks very fresh. There are three layers of the shelf in a total of three layers, and there are three partitions in the middle. The overall looks both standardized and lack of creativity.

The overall red standing shelf is relatively simple. In addition, this red shelf is relatively spaced to add a lot of lively youthful beauty.

You can place a tall cup on this rack, and you can place some drinks such as red wine beverages below. The overall shape is very individual.Suitable for installation on the wall of the meal cabinet or the bar.

A satisfactory vase is paired with a flower with a personality and two small display paintings. It seems very creative and artistic.

This partition seems to be very individual as a whole. It looks like the shape of a boat. The solid wood texture on the surface is also clearly visible, and it is also very textured to touch.If you like simple and personality, this partition partition is very suitable for you.

The color of this partition partition is bright, and the large partition is covered with small partitions. This design is for a reasonable match for color, followed by increasing artistic sense.

The setting of this partition and desk form a good response, and it seems very creative as a whole.

Rack classification

Divided by material:

1. glass setting rack

Features: It is generally made of tempered glass. It is stylish and easy to clean, but it is necessary to avoid strong collisions.

Cost -effective: high

2. Plastic shelf

Features: It has the characteristics of resistance to corrosion, anti -aging, rustless, non -toxic, odorlessness, high pressure resistance, light weight, and simple construction.

Matching: Usually, it is mainly practical, and the appearance is usually poor.

Cost -effective: low

3. Stainless steel shelf

Features: no corrosion, erosion, rust or wear.Because stainless steel has good corrosion resistance, it can keep the structural components permanently maintain the integrity of engineering design Essence

Matching: Generally, you choose a wall -hung shelf, which can make good use of space and increase the metal sense of the kitchen.

Cost -effective: medium

4. Alloy setting rack

Features: A substances with metal characteristics consisting of two or more metals or non -metals, such as space aluminum shelf.

Matching: With the same color cabinets, it will have better decorative effects.

Cost -effective: medium and high

5. The barrier shelf

Features: The rack combined by the PPR pipe can be freely matched with combinations, hollowed out in the middle, putting on the partition, the color of the partition is green, orange, blue, black and other choices, beautiful and fashionable.

Matching: The appearance is very beautiful, and the assembly is very simple. DIY is autonomous.

Cost -effective: medium and high

Divided by style:

1. Flooring rack: refers to the shelf placed on the ground, mostly placed in the corner.Don't look at the wall, but the cabinet is vulnerable to moisture, and the hygiene below is not easy to clean.

2, adsorption rack: refers to the shelf adsorbed on the wall and does not contact the ground.It is convenient to take care of it, but the requirements for the wall are high, and it must be installed on the load -bearing wall. It is best to be a physical brick wall.

cleaning of the rack

1. Wipe the rack with water and dry it with a soft cotton cloth. Do not use any grinding cleaner, cloth or paper towels, and any acidic cleaning agent, bright abrasive or clearing Wipe the surface of the shelf in a sanapa or soap.

2. Because the long -term residues of chromium -plated surfaces such as various kinds of wash and shower gels are usually used to degenerate the surface of the shelf and directly affect the surface quality.Please use soft cloth at least a week clean the surface of the rack once, and it is best to use a neutral cleaner.

3. For stubbornness, surface dirt and stains that are difficult to remove, please use mild liquid cleaner, colorless glass cleaning solution, or cleaning liquid without wear. Then clean the rack with water and dry it with a soft cotton cloth.

4. You can use cotton wet cloth with toothpaste and soap, wipe it gently, and then wash it with water.

5 You can use wax oil with strong decontamination capacity, apply it on a clean white cotton cloth, and clean the entire product thoroughly. The cycle is generally 3 months. This can extend the life of the shelf life.Remember that every time you clean, you must wipe the water stains, otherwise water stain dirt may appear on the surface of the pendant.

maintenance of the rack

1. Develop the habit of opening windows and windows frequently. This will not only keep the air in the bathroom Smooth, but also help the family's health, absorb more fresh air.

2. The surface of the rack should be often wiped with soft whole cotton cloth and water to ensure bright luster. You must not use corrosive acid -alkali solutions. Try not to use detergent. clean.

3. Usually if we want to decorate, do not let the paint on the shelf, because the paint has a great corrosion effect on the plating on the surface of the rack.