The office room room is a place for collective decision -making, business research and negotiations, and employees' meetings. The atmosphere must be slightly lively and slightly lively to stimulate and speak the thinking and emotions of the people.The area of the conference room depends on the use needs, and there are large and small.How to place plants in the conference room is appropriate?Leaf -viewing plants with higher leaf -viewing plants in the conference room, such as brown bamboo 'to ease and rigid.Several can also be used to arrange viewing flowers, fruits, aromas, or Hanging plants, such as a red, fragrant machine, Milan, cliff chrysanthemum, etc.There can also be a small amount of sketches on the window sill.

Small and medium -sized conference room

Generally used for office and meeting.The Conference table is mostly arranged in the middle of the room, with a long oval or rectangular layout. The middle of the table is correspondingly become an oval or rectangular rectifier. Generally, leaf -viewing pots are decorated, such as southern fed Large -scale plants such as Kwai and Goose Palm Chai are symmetrically arranged, and the height is not higher than the desktop 10 cm to avoid blocking the sight of the sitrs; Crab claws, osmanthus, Liju, etc. If you are a flat table, you can configure a small pot or a few pots on the desktop.The pottery or flower arrangement in front of the chairman or central spokesman should be appropriate, suggesting that the status is different.

Large conference room

The podium and conference seats are often arranged separately. The focus of greening is the podium, especially the establishment conference, commendation conference or celebration. EssenceGenerally, tall leaf -viewing plants such as brown phase, Nanyang Shan, dragon cypress, large leaf yellow cypress, etc., are arranged in a regular way.The density should not be too large, and the end wall or curtain should be slightly exposed.For example, when the curtain is extremely dark, the leaf color is lighter or flower -viewing plants such as sea caves, Huang, Bailan, Milan, etc.Regardless of the use of the pot flower, the height should be higher than the people standing on the stage, so that the flowers are integrated with others.

The presidency is neatly placed with two rows of pots of pots. The front row can be used in the front row, such as rose, hydrangea, and dry golden lotus; the rear pelvis flower is higher than the front row, but it should be lower than 1/3 of the mouth of the mouth; Under the front of the pot flowers, low -view leaves can be used as a settlement, such as Tianmen winter Grass as a settlement to live without exposed Flower pots.This layout seems to be full of anger, not too rigid.The podium should be embellished with a drooping flower arrangement. The color is rich and gorgeous, the shape is dignified and lively, and the height does not exceed 20 cm.The rear row of the podium is highly neat leaf -viewing plant for background.

On the independent podium on the side of the podium, you can decorate with a moon or drooping flower arrangement.A bit of a large venue specifications are high. You can use flowers on the back of the pier to make large floral furnishings, and place tall leaf -viewing plants and large combination of flower arrangement on both sides of the podium as symmetrical layout.At the same time, the plant layout around the venue and the background of the venue must be considered to echo it as a whole to show the grand, spectacular and enthusiastic of the atmosphere of the conference.There are guest seats under the audience, and small horizontal flower arrangement can be designed according to the situation.

Large -scale conferences can also arrange the opening ceremony of the opening ceremony that reflects the theme. If you enter the venue lobby, there is a large space, and you can decorate the flowers regularly to render the atmosphere.flowers can be placed in the coffee table and flowers in the reception room or the guest room.The flower decoration of the guest coffee table is more gorgeous than the ordinary coffee table.

one,Conference tableWhat are the materials

1. solid wood Conference table

solid wood is a classic material, which is loved by most business owners.The Conference table made of this material is placed in the conference room to make the atmosphere of the conference room more solemn, making the staff more aware of the importance of the conference in the conference room, which is unparalleled.The solid wood Conference table is expensive and requires frequent maintenance.

2. Steel Conference table

The main material of the steel Conference table is stainless steel. Due to the characteristics of stainless steel, the steel Conference table is large and difficult to move.Its advantage is that it does not require special maintenance and has a long service life.

3. Acrylic Conference table

Acrylic is a chemical polymer material, which has the same characteristics as plastic.The Acrylic Conference table looks like plastic, but it is more beautiful, smoother, and has good anti -pollution and fire resistance.Usually used in small enterprises or corporate departments/group conference rooms.

4. The marble Conference table

The marble Conference table is usually made by polishing and engraving the entire high -quality marble.Due to the price of marble stone, high carving costs and transportation costs, the price of the marble Conference table is very expensive.The level of the marble Conference table is also very high, but the weight is also very high, and it is difficult to move.

How to choose the Conference table

1. style matching

Because different enterprises have their own different styles, when choosing a Conference table, they must be selected according to the characteristics of the enterprise conference room., Avoid affecting the overall image of the enterprise.

2. Size

Because the space in the conference room is limited, you must pay attention to the selection of the size when choosing the Conference table, so as not to be too large in the Conference table, which causes the conference room space to be too crowded, or the Conference table is too small.The meeting room was too empty.The best way is to measure the size of the conference room before choosing the Conference table, so as to choose a suitable Conference table to create a harmonious office meeting room environment.In addition, according to the company's size and number of participants, you can choose a meeting table with appropriate size.

3. Material

There are many kinds of Conference table materials on the market,The materials of the office Conference table are conventional: solid wood, plate, and steel and wood combined with the Conference table.The high -end office conference tables are generally solid wood or paint conference tables. The low -end ones are generally board conference tables, and the low -end ones are steel conference tables.When choosing a Conference table, you must choose according to the specific needs of the enterprise, but no matter what kind of materials are selected, the safety of the material is the most important. To avoid buying an environmentally friendly Conference table, it will bring some unnecessary harm to the human body.

4, price

Generally speaking, the material of the Conference table is different, and the size of the size is different. This depends on the company's choice.If the company is a large company and has strong strength, you can buy high -end office conference tables. If the company is small and at first developing, the economic strength is limited, then the appropriate choice of low -end board conference tables or steel and wood combined with office meeting.The table is more proper.

one,solid wood Conference tableHow to clean

1. clean toothpaste

If the surface of the solid wood Conference table is white, it takes a long time, and the surface will turn yellow. At this time, you can use a rag to dip some toothpaste to wipe it on the surface to remove the yellow stains on the surface of the solid wood Conference table.

2. clean tea

The surface of the solid wood Conference table that has been painted is dipped in dust. You can use gauze to wrap the tea residue, then wipe it hard, or clean it with cold water, which will make the surface of the solid wood Conference table more Smooth and bright.

3. Lemon cleaning

If the wood that brightens or paint the paint is scalded by the thermal heat such as "light firewood", you can first wipe it with half a lemon, and then use the soft cloth immersed in hot water to wipe it.Finally, quickly dry it with the dry soft cloth, and you can recover as early as the beginning.

4. Soap clean

When cleaning the solid wood Conference table, use a rag or a soft sponge, wipe it with soapy water. After drying, apply the light to the light to make the light.

5. White vinegar clean

When cleaning, it is difficult to remove stains. You can use the equal amount of white vinegar and water mixing solution to wipe it with a rag, especially for the cleaning of the solid wood Conference table.

2. How to maintain the solid wood Conference table

1. Generally, the solid wood Conference table is wiped with a dry soft cloth. If the stains are more serious, you can use warm water to wipe it with detergent.Do not use chemical light brighteners to prevent the paint film from becoming damaged.In order to maintain the brightness of the paint film of the table, the walnut can be crushed and peeled, and then the three layers of gauze can be polished.This method is very useful for the maintenance of the solid wood Conference table.

2. The solid wood Conference table should stay away from the heat source and avoid direct sunlight.Do not let the solid wood Conference table at the sun exposure for a long time.Do not place it in the heating place in the solid wood Conference table. Do not avoid the indoor temperature overheating. Generally, it is advisable to wear a sweater in the room.In summer and summer, it is necessary to open air -conditioning and humidifying, reducing the water absorption and expansion of wood, and avoiding the wet and transforming of the mortise structure.

3. The solid wood Conference table has quite strict requirements for the placement. When placing, it should be far away from the door with strong air flows such as the door, window, and air inlet to avoid strong air circulation caused certain damage to the paint film on the surface of the Conference table., Do not cause the solid wood Conference table to fade due to the sunlight.

4. It is best to use waxing and maintenance for the solid wood Conference table every six months to prevent the paint of the solid wood Conference table fall, affect the beauty, and even shorten the service life.If you want to move the solid wood Conference table, you should raise the table and do not drag it to avoid loosening the overall structure of the Conference table.

5. The solid wood Conference table must be placed smoothly. If the placement is not very Smooth, find some Skin -making or other relatively hard things to flatten, because it will be shaken for a long time, the connected mortise structure of the solid wood Conference table will be used for a long time.Songs, which will make the entire solid wood Conference table disperse, which will affect the service life.

6. In order to protect the panel paint film of the solid wood Conference table is not scratched, it is also necessary to display wood texture. Generally, a thick glass plate can be placed on the desktop, and a small suction cup is used between the glass plate and the wooden table.It is recommended not to use transparent polyethylene crystal boards.

1. What are the material of the solid wood Conference table

At present, the furniture and decorative tree species include chous willow, oak (white oak, red oak), rubber wood, pine, beylum, eutramus, teak, camphor wood, elm, nanmin (golden sannan), nanmin (golden sannan).Cherry wood, maple wood, etc.

Second, the size of the solid wood Conference table

1. Small Conference table: 1800*900*750mm, 2400*1200*750mm.

2. Middle -size Conference table: 2800*1400*750mm, 3200*1500*750mm.

3. Large -scale Conference table: 3600*1600*750mm, 4200*1700*750mm, 4600*1800*750mm, etc.

3. How to choose a solid wood Conference table

1. Material selection should be optimistic

When buying a solid wood Conference table, you must first optimistic about its material.The solid wood Conference table can clearly see the texture and color of the surface, while inferior products are not easy to see.Many inferior products also choose to use solid wood on the surface, but the inner layer is a plate, so we need to pay attention when buying.Because of the preciousness of solid wood, many businesses will be charged with the second time, so the market of solid wood conference tables is full of phenomena of fishy eyes, which requires consumers to raise their own awareness and avoid stepping on lightning.

2. Observe the performance of the Conference table

When buying a solid wood Conference table, observe whether its performance is defective.As a Conference table, it must have safety and stability.Therefore, when we buy the Conference table, we check out the reliability of the table, whether it will shake unstable, whether the corners are defective, and whether each component connection is tight.At the same time, don't forget to check whether the desktop of the meeting is Smooth and clean, and observe whether the paint film is Smooth.

3. Choose regular suppliers

Choosing regular suppliers is actually a guarantee of material.Regular suppliers can provide high -quality design, production, distribution, and after -sales service, and also provide free warranty, so that customers can remove their worries.

4. Size style

Of course, when buying a solid wood Conference table, you must also pay attention to whether the size is in line with the space environment and whether its style is matched.

one,Conference tableHow to put mineral water

Due to the request of the meeting to provide beverage services, the standard meeting is generally provided with mineral water.

mineral water is on the right side of the Sika.When placing mineral water, the mineral water is generally placed on the right hand side of the participants to facilitate the participants to get it.If the bottle water is placed, the tag of the bottle should be faced to yourself to avoid mistakenly obtained.

The placement of mineral water at the Conference table will vary from the preferences of venues, culture and organizers.However, the following are some suggestions to refer to:

1. The desktop is neat: ensure that the desktop is clean and the flawless mineral water bottle is placed.

2. Easy to use: Place mineral water in places where the participants are convenient, such as the corner of the table.

3. Place the order: Place the tea cup next to the mineral water to facilitate the use of the participants at the same time.

4. Keep consistent: The placement of tea cups and mineral water bottles should be consistent to show professionalism and neat image.

5. Following cultural habits: Considering local cultural habits, such as the placement of tea cups in Chinese culture may be different from Western culture.

6. Consider environmental protection: minimize the use of disposable cups and bottles as much as possible, and can provide reusable cups and large bottle water.

7. Prepare sufficient mineral water: Make sure to prepare enough mineral water according to the scale of the meeting and the number of participants.

2. Conference desktop items placement standards

1. Tea cup: On the upper right side of each position, the cup handle is to the right,StoremateIn the face of the guests, the cup is 5cm from the table on the table at a meeting table, and the label pad is placed below.

2. Biter cup: Put on the upper right side of each seat, usually on the left side of the conference cup, the hedging cup and the tea cup are 1cm, and the coasters are placed below.

3. mineral water: On the right of each hear cup, the Trademark of mineral water is faced with guests (regular meetings entertaining general mineral water bottle).

4. Oxavar: Generally, there are three seats in the general meeting, a pan -cylinder in the center, and 1,5cm in front of the table at the table.

5. towel support: Put on the upper left side of each conference position with 2cm interval. The upper end of the towel support and the conference cup is a straight line.

6. Meeting paper: Put on the right side of each guest's chest. At the bottom left of the tea cup, the conference paper is placed at 1cm from the meeting table. Generally, 2 pieces of paper are placed.Meeting.

7. Pen (usually a pencil): Placed on the top of each paper, the pen tip is in front, the slope is 45 , and the shop standard is up.

8. flowers: Put it according to the requirements of the guests, and the height does not exceed 30cm.

9, seat card: placed in front of each seat, 1cm above the Conference table.

10. Tea break: Put it according to the requirements of the guests (it is best to automatically persuade the guests to establish a tea break for the guests, and at least one waiter to provide services).Put paper towels, toothpicks, raw fruit plates, food discs, coffee cups, discs, coffee spoons, coffee stoves, sugar tanks, milk, Square sugar or sugar Bags.

Note: All items are required to be specified.

3. Conference table Place etiquette and conference services

1. Place etiquette

(1) The placement of the Conference table should be positive. The chair is placed in front of the Conference table and kept about the distance from the Conference table. The distance before the chair should be evenly about one person distance.To become a straight line.

(2) Put the manuscript paper on the Conference table according to the location of the chair. The manuscript paper is placed in the middle of the middle position of each chair.The nib is facing up, and the label was leaked.

(3) After the manuscript paper is positioned, the tea cup is placed above the right of the manuscript paper, and the distance is about a finger at the side of the manuscript paper.

2. Conference service

(1) The water starts from the right (the leader first, the clockwise sequential sequence), after pouring the water, the pot mouthDo not pour from the guest to the right.The podium must add water from the back of the guest.

(2) When adding water, if there is a covered cup, apply the little finger and unknown finger of the left handCracker the small balls on the cup lid, hold the cup with your thumb, index finger and middle finger, and end it from the deskTea cup, one after the other, pour the water into the cup sideways.

(3) If the guest work or talks, say "I'm sorry", and note when pouring the waterDon't be too full, it is advisable to be full of seven or eight points in the cup.Do not work too high, let aloneYou must cross the shoulders and heads of the guests.

(4) Do not lift the pot too high when continuing water, so as not to splash water.Don't stop the tea cupPour water directly or put the cup lid on the table.

(5) Renewal of water is generally carried out after 15-20 minutes in the event, and the venue is used at any timeWater situation.When you encounter the hot weather, you must add it at any time.The mouth is too high to avoid splashing out of the cup.Key points: Get up or rolled on the table on the cup lid, noCan be deducted, unhygienic, impolite.

(6) Choose the water time before the meeting starts, usually 5 minutes before the start of the meeting.