The main points of the sun room decoration

1. Put safety in the first place

To do a good job of decoration services, we must pay attention to the pursuit of details, and paying attention to the relevant details and content must be comprehensively considered, that is, the key and key points of the decoration service reflect the professional standards.Therefore, from the overall design of the Sunshine room decoration, at the same time as fashionable and beautiful, it is necessary to consider safety, so the safety is first.

2. Personalized design should be moderate

In the basic conditions of decoration services and the basic conditions of the service characteristics of the sun room, the pursuit of personality design is still very clear, and it is also the basic condition for achieving the decoration goals.In terms of the goal of decoration, the design of the sun room decoration should be moderate. This is also a very suitable choice for the possibility of decoration services and suitable for applications.

3. Basic engineering should be guaranteed

To achieve the high quality of professional decoration services, the basic requirement of Sunshine room decoration at this time is to achieve the characteristics of sunlight and leisure comfort. It is also the reason that pay attention to the overall construction professional high standards.In particular, the basic projects are important. The design of waterproof engineering and Sun protection should be fully considered, and the construction must be fully combined with patience.

Frequently Asked Questions of Sunshine room Decoration

1. Leakage problem

Sunshine room waterproof mainly has two ways: material waterproof and structural waterproof.There is a huge hidden danger in waterproofing materials. Once the Waterproof material fails, it will cause water leakage of the sun room.

2. Flowing fog

If the heat insulation effect is not good, this phenomenon is very easy to occur when the temperature difference between indoor and Outdoor is large.

3. Cold bridge phenomenon

The north is a area where the phenomenon of "cold bridge" is often occurred. Because the weather in the north in winter is relatively cold, the temperature of indoor and Outdoor temperatures is large. After the cold air enters indoors and combines with hot air, the water mist is adsorbed on the surface of the sun room.It affects the beauty of the sun room.

4. winter cold summer heat

When the Outdoor temperature is low in winter, the indoor heat loss is large and the room temperature decreases; when the Outdoor temperature in summer is high, the indoor refrigeration loss is large, the room temperature rises, and the hotter the weather, the higher the air conditioner load.The fundamental reason for the phenomenon of "cold winter and hot in winter" in the sun room is that the material insulation effect is poor, the product and supporting system are not perfect, or there is no product system standard and supporting system.

precautions for Sunshine room Decoration

1. The launch of sunny real estate tiles

If a small garden is planned in the sun room, then the floor tiles can not be so flat without paving, and some gully can be kept, so that the soil and water can be retained.A little level in the corner of the roof ground leakage can facilitate the flow of water in the soil.

2. The problem of placement of sun room plants

Because the sun room has sufficient sunlight, many people like to place plants inside, so the Sunshine room is not only suitable for plants, but also the plants have regulating the temperature, humidity, and air quality in the sun room. Choose to chooseWhen plants are placed, it is necessary to pay attention to the plants that are suitable for placing indoors, because some plants are not suitable for placing indoors, such as narcissus, peels, mimosa, and so on.

3. The problem of the placement of the Sunshine house storage cabinet

Putting a locker in the sun room, then it needs to be arranged in the corner of the sun room to avoid direct sunlight. Of course, when arranging in the corner, you need to see if the plants can climb to the locker.If you climb to the locker, the locker can easily be moisture.

4. Sunshine room drainage system problem

The drainage of the sun room also needs to pay great attention. The area of the pool in the sun room should not be too large, because the water volume is too large, the water will overflow, and the overflow of water over a long time will cause damage to the building.Time must leave doors and windows to make the sun room ventilation and ventilation.

4. Problem of Sunshine room structure

You must know that the main structure of the sun room is important. It is the most supportive support for power. However, when we build a glass house, we must first consider the structure of the glass house.The space area of the top floor, dear, pay attention!Do not change the area of the glass house without permission. If you change your own area at will, you will have a certain problem of safety hazards, and if you accidentally become illegal buildings.

5. Selection of Sunshine room Materials

The reason why it is called Sunshine room is definitely inseparable from the sun.So, the materials of its main structure must be selected well. As for the selection of materials, it is recommended that everyone is based on glass. When we choose glass materials, we must also pay attention to selecting insulation and sound insulation.In addition to the required glass as the main material, the help of the structural frame can be formed. The structure of the glass house must be available. The structural rack can choose the aluminum alloy Square Tube pillar, and the rest of the top surface of the Square pipe can be installed in both directions.In this way, the sun can be fully illuminated, and it is also safe and firm.

6. The heat insulation of the sun room

In the summer, if you do not do insulation for the sun room, it will allow us to live in a steamer.Therefore, here, I want to remind you that the heat insulation of the sun room also needs to pay attention to it. Since the sun room is made on the roof and it is made of glass, it will be very sultry under the scorching sun in the summer, so we willWhen making the sun room, the heat insulation treatment is required, and the heat insulation can be pasted with glass thermal insulation film on the top glass.Because the insulation film has a deep color reflective substance on the surface, it can reflect the sunlight to achieve the heat insulation effect.Putting the thermal insulation film on the glass can improve the ability of the glass, reduce the permeability of the glass, reflect the sunlight, and achieve the heat insulation function.You can also lay high -density rubber and plastic aluminum foil insulation board on the surface of the top glass, and the ceiling heat insulation treatment is set to set a quiet air fan at an appropriate location. The air duct is located outdoors.Essence

Pay attention to the renovation of the sunrise house on the top floor

1. Building Materials selection

The rules and model selection of Steel Structure materials must be fully taken into account factors such as the location, the height of the ground, and the orientation of the ground.Lightning protection, the current building is fully implemented. Generally, there is no lightning strike. Everyone is easy to ignore. On the top floor, you must consider the lightning.The top glass is cleaned. The city in my country is large. It is not transparent to the glass top of the sun room in a few days. It is critical to clean it. It is recommended to open a few skylights on the top surface.Based on load -bearing capacity.There are many aspects such as wind pressure and steel structures in the process of long -term use.Select the steel lining that meets the strength requirements.Steel Structure processing: According to the stress condition of the material.Ensure firm welding.To do a good job of rust, it is recommended to use high -temperature shaping or Outdoor iron to use boiling carbon paint.

2. Anti -rust treatment

glass: The top material is generally tempered glass, including single -layer tempered glass, hollow tempered glass, and safety glass of tempered glue.The roof is fine at the top floor, but if the top floor is built, it will be dangerous if it is too high. Many companies are unwilling to make the top -level sun room too high.Safety, especially top doors and windows.

What are the issues to pay attention to in the transformation of sun room?How to build a sun room on the top of the building is safe?Note at 2 o'clock.It is recommended that you prepare the preliminary preparations of the sun room. The two steps for selection and rust removal. Even if you succeed in the sun room, you can do the best Sunshine room life experience!

precautions for decoration

1. Overdog

For top -level real estate with strong lighting capacity, it is also one of the necessary steps to properly improve the lighting capacity of the room.It is recommended that you set up a sunshine that can be opened and closed outside the main lighting window;;Use curtains with strong shielding effects or laid insulation film on the glass in summer.This is a very necessary decoration method for west -to -high real estate.

2. waterproof

The most prone to the top -level property on top surface waterproof problems.If your home decoration is high and the requirements for decoration are higher.Then it is recommended that you simply spend a thorough maintenance of the waterproof on the roof and conduct a detailed inspection once a year.In this way, you can basically ensure that the indoor decoration is not destroyed by the top surface.

3. Insulation

The insulation performance of the top -level real estate is mostly weaker than the real estate on other floors. Therefore, when renovating the top -level real estate, you should pay attention to the thermal insulation capacity of the house: It is generally recommended that you use the insulation methods such as high -quality doors, windows and indoor soft Bags to create a one for yourself for yourself.winter warm and cool in summer, comfortable indoor living environment.

4. Wind -proof

The house on the top of the building also needs to be windproof.summer storms, so doors and windows must strengthen their firmness.In winter, the wind is Bone, and the windshield needs to be considered.

1. Sunshine roomPC endurance boardHow are you?

1. Advantages of PC endurance board Sunshine room

(1) High light transmission, like glass, is as high as 89%, ensuring that the sun room is combined with nature and sunlight.

(2) Strong compressive resistance. The impact is dozens to hundreds of times of ordinary glass. It has high hardness and is safer than glass material.

(3) The material is lightweight. The material belongs to the plastic material. The material is very light. It can change the shape at will to solve the problem of self -in -law.

(4) Temperature -resistant heat insulation, the surface of the PC endurance board has a UV coating, which can effectively block ultraviolet rays, and for a long time, it is not easy to turn yellow.

2. PC endurance board Sunshine room disadvantages

The PC endurance board is light and requires a certain glass or other auxiliary materials to be thickened to make the plate stronger.In terms of expenses, it is higher than glass.Pay attention to the flat mouth cutting during the cutting period to avoid scratches during installation.

The PC endurance board is a new type of Sunshine room material. The surface UV coating can certainly resist ultraviolet rays and play a role in heat insulation. The materials are not easy to age and turn yellow.It is not prone to rupture and explosion in C. Although the price is more expensive than glass, the PC endurance board does not explode, no rupture, and yellowing.SunshineThe best choice material.

Second, the common problems of the PC endurance board of the sun room

1. Is the PC endurance board an acrylic board?Is it organic glass?

No, PC endurance board is also called polycarbonate board, which is an emerging material in recent years. It is processed by high -performance engineering plastic polycarbonate.The acrylic board is a type of organic glass. The weather resistance, light transmission rate and impact -resistant Biac clan board of PC endurance boards are more advantageous.

2. After a long time, will the PC endurance board be yellow?

The PC endurance board has a UV coating. Under the direct sunlight, the PC endurance board can absorb 99%of ultraviolet rays. It is not easy to aging and yellow. The light transmission rate in 10 years is only about 6%.

3. Will the PC board release a toxic smell?

PC endurance board raw materials are polycarbonate. There is no need to add any substances. UV coating is non -toxic and pollution, and burning will not produce toxic gases.The acrylic board is an organic material, and a small amount of toxic gases will be generated when burning.

4. Deformation as soon as the sun is exposed?Can you crack when you encounter low temperature below 0 degrees?

No, the PC endurance board has the function of high temperature resistance and low temperature resistance, and the performance is stable between 40 degrees and negative 120 degrees.

5. How about PC endurance board?

The PC endurance board has good impact resistance, which is 300 times that of the same thickness of ordinary glass, 30 times that of organic glass, and 20 times that of tempered glass.It can resist hail, snow pressure, and even high -altitude parabolic damage, effectively protecting property and personnel safety.

6. Will it not become a large steamer in the summer?

The K value of the PC endurance board with the same thickness is 7%-25%higher than that of glass, and the heat insulation effect is 7%-25%higher than similar glass.curtain.

7. PC endurance board is not as good as glass?

The PC endurance board's light transmission is similar to the glass, but the impact resistance is 2-20 times that of tempered glass. The heat insulation and sound insulation performance is better than the same thickness glass.

8. How many years are PC endurance board life?

Under normal circumstances, the life expectancy of PC endurance board is 15 to 20 years. If it is properly maintained, the service life will be longer.

9. What is the price of PC endurance board for sun room?

The price of the mobile sun room is calculated according to the development area. The specific price is based on the size and material of the built. The general price of the German imported PC endurance board material is generally 2,500 yuan to 3,000 yuan/Square meter.

10. Will it be noisy on rainy days?

The sound insulation effect of the PC endurance board is better than the same thickness of the same thickness, and the sound will be less sound insulating than the same thickness, so the sound dripping on the sun room will be smaller.

11. Is PC endurance board Sunshine room illegal building?

No matter what materials are used, consult the relevant departments and properties in front of the Sunshine room, and go through the corresponding approval procedures to avoid illegal construction.

Method of the greening room greening

planting flowers and grass on the sun room must also be cleverly matched. Pay attention to the neat and beautiful placement, otherwise the effect will be as messy as weeds.Avoid cluttering, and pay attention to the order of high and low, staggered, and clear Levels. You should also pay attention to leaving a considerable space to avoid making people a sense of congestion.

This requires several ways to place a certain method. For example, when a sun room is used for greening, the flower garden of the sun room must be facilitated to water and manage, but also to make various flowers fully absorb the sun.There are also tricks for plants and plants. There are usually five types: inlaid, Hanging, staircase, natural and embellishment.

1. Inlaid type: It is generally used on the sun room that has been decorated and has a smaller area. It uses a half -pale Flower pot with a wall inlaid with an inlaid component, and then planting leaf plants.

2. Steel type: It is a staircase in the sun room and the three -dimensional pot flower layout. General plants can be cultivated in this form.2 to 3 pots can be placed on the wider railing outside the sun room. Small landscapes made of wood or metals on the east side of the sun room.Put the medium and small flowers, respectively;

3. Pyming type: Plant small plants such as small and exquisite containers, and then hang it on the top panel of the sun.You can also plant vines or other winding leaves.In order to make full use of the space, the hooks are embedded in the sun room table or at the eaves and Hanging the Hanging pot flowers.What flowers are planted in the suspension, depending on the location of the hook.In the sun, it should be planted with gratifying flowers;It is best to plant branches and leaves in the suspension.

4. Natural style: Use pots outside the sun room to plant some wooden vine plants to make the plants droop naturally, forming a natural landscape.A small planting slot is set on the west side of the sun room, and climbing or vines such as climbing tigers, wooden fragrance, fragrant peas, and small luins.Of course, you can also choose plants that need little sunlight, such as Changchun vines, vines golden golden gold, and can be placed in almost anywhere indoors.For the climbing of plants, you can even add a garden art wall as a decorative grid, along a wall along the sun room.

5. Concubine: Sunshine room is like a linked courtyard inner and Outdoor courtyards, metal art and other accessories decoration rooms on the Outdoor house.If this sunshine container adds a small jewelry associated with these flowers and plants, a miniature potted plant with a palm, a crystal clear hydroponic flower, a small fish tank, a Hanging fan, a wind chime ... Hanging in a sunny window can be available.Very beautiful, you may find that you and flowers and plants will be very happy. Your new Sunshine room will be your favorite place to relax in the four seasons of the year.

What green plants are suitable for sunshine houses

Most plants that have good ventilation and sunshine rooms can be raised well, such as Milan, Jasmine, plum blossoms, Plums, Rose, Pomegranate, Gardenia, Shi La Hong, a series of red, lotus, chrysanthemums and dwarf cows, etc.;Tree bonsai such as Su Tie, Banyan, June snow, elm tree, wolfberry, bird plum, yang, liquor, money and pine and cypress;Called half lotus, picana) and fairy -based mountain shadow fist, fairy ball, cactus, aloe vera, etc.

Sunshine room layout renderings

Where is the easiest to leak in the sun room?

1 As well as The connection between the frame and glass and the wall

Because many sun rooms are built on the wall, there are many walls facing walls, so that it is very easy to leak at the connection between the wall and the glass.There are some walls that have inner lining thermal insulation materials. When making shelves, if the ingredients are not close to the wall, and waterproof, it can easily lead to the sun room." Ten nine missions " Essence

2 , Framework construction is not strong

Some irregular sun room production companies cut corners and use non -national standard iron or aluminum pipes. The strength is not enough. The overall frame of the long sun room is deformed, causing the glue to crack and leak water.

3 ,water proof The glue is not selected well or did not fight well

Everyone knows that the Sunshine room is composed of frame, hollow glass, and broken bridges, aluminum doors and windows. The filling between the between it is glass glue, and the brush layer on the wall is exposed to the sun. The paint will gradually fall off and loose.Beat on the wall and glass The adhesive seams were slowly peeling and falling off, and the problem of leakage occurred in the cracks.

4 As well as waterproof glue failure produces cracks

The brush layer on the wall was exposed to the sun, and the coatings gradually shed and loosened. The gel seams that previously hit the wall and glass connection slowly peel and fall off, and the cracks caused water leakage.

Sunshine room leak Seepage Solution

1 After the Sunshine room framework is completed, if there is a place to connect with the wall, it is necessary to remove the coatings on the original wall so that the glue and the wall can be firmly connected.After the glue is tapping, the wall is slotted on the wall above the load, and the raindrop plate can be installed to ensure that the double -layer waterproof is not leaked.

2 The Sunshine room plays a very important role in waterproof. The top of the sun room is generally structural glue and weather resistance. In the gap between the top covering, first hit a layer of structural glue, and then attach a layer of weathering glueThis can make the frame and cover firmly connect.Between the doors and windows and the frame, it is best to give up 3-5mm In the gap, the glue can be sticking to the gap between the doors and windows and the frame, so that the structure is stronger and the waterproof effect is better.

3 The sun room is different from the doors and windows. It is formed by the overall frame structure, and the top of the sun room is generally high, and the force is large. Therefore, you must choose a good quality framework material and pay attention to the quality of construction.

4 The ending of the sun room is important.The glue between the doors and windows and the frame must not be omitted. The joints of the door and window profiles, and the joints between the frames, as long as there is a gap, may leak rain.

How to do drainage in the sun room

1 Reasonable organizationDrainage system

The reasonable organization of the drainage system is mainly to determine the drainage direction of the Sunshine room and the eaves drainage method.In order to quickly eliminate rainwater, the drainage direction of the sun room should be clearly clarified to reduce the turning point.

2 , Determine the appropriate drainage slope

In order to exclude rainwater, the Sunshine room requires a certain amount of drainage slope. The larger the slope, the smoother the drainage.However, when the slope is quite large, it will cause adverse conditions to the construction and structure layout, so it is important to determine a suitable slope according to specific requirements.The slope of the sun room is determined by various factors. Among them, the amount of precipitation in the area, the body shape, size, and structural form of the Sunshine house have the greatest impact on the slope of the sun room.The important factor, in general, the angle between the slope of the sun room and the level is not less than 18 Degree, not greater than 45 It is appropriate.