1. What light is suitable for the study?

1. table lamp

LED light sources in the study are relatively common.However, the bad LED light source may have a glare, and it will have a bad effect on the eyes. Therefore, when choosing the LED light source, you must be very careful.

2, ceiling lamp

The lighting of the study is not suitable for too large, nor is it suitable for too small.The main light can be used to use the ceiling light.

3, floor lamp

If you have a reading sofa chair in the study, you can place a floor lamp next to the sofa to provide local reading lighting.

4. Shooting Lights

Small shooting Lights can be installed in the bookcase, which can be decorated with bookcases, which is also convenient to find books.

2. How much watt is fit for the study?

Generally, the lamps of the study are almost about 40 watts.

3. The main points of design of the study

1. Add table lamps to the desk to strengthen reading lighting

If you want to sit in front of the desk, only indirect lighting is not enough. It is best to set up a table lamp at the corner of the table, or set up a Hanging lamp on the top of the table for key lighting.Especially when there are children in the home, in addition to the desk design must be adjusted with it, at the part of the local light source on the desk, it is best to choose an electronic table. It is best to try whether there will be flashing before purchasing.The situation occurred.

2. indirect light source to enhance the quiet atmosphere of the study

Indirect lighting can avoid the visual dazzling damage caused by direct light radiation, and it is a bit tired to turn the Lights on the light, and it will not want to be in this space for too long. Thinking is not easy to concentrate.Therefore, in designing the study, it is best to treat the indirect light source, such as the hidden light source around the ceiling, so that the calm atmosphere of the book can be set up.

3. Use rail Lights to direct bookcases to create visual scenes

Bookcases can also create interesting effects through light changes. For example, through the design of orbit Lights or embedded lamps, let the collection or items on the bookcase on the bookcase change the visual focus of the end view.

4. Aversion of light source direct computer screen

Because the computer screen itself will emit strong light, if the light of the space is too bright, it will reflect on the screen, the eyes are easy to be uncomfortable, and the words on the screen cannot be seen.But if the computer screen is only on, and the surroundings are darker, the vision is prone to fatigue.Correct practice: It is not allowed to make the brightness of the two from dark, and the brightness of the two should be similar. When reading the text in the computer for a long time, it is not easy to get fatigue.

5. Keeping natural light is important

The study room is suitable for reading. It is best to build the location of the study in the place where there is a natural light source. Even if it is shared with other spaces, such as the master bedroom or the corner of the living room, the location of the desk is best to be close to the window.In addition, the design of the study of the natural light source can be adjusted through the design of the shutters.

Most of the study decorations are elegant and quiet, giving people a quiet and calm feeling. Only in this way can it be more suitable for quiet reading.The design of the study of the study is the focus of the study in the study. Similarly, the lighting design in the bedroom, living room and other rooms also deserves our attention.

Wall lamp daily cleaning method

1. The Wall lamp is easy to accumulate dust, and regular dust removal can be maintained to maintain good lighting effect.You can wipe it with a wet cloth, keep the action in the same direction, do not rub it back and forth, and the strength should be moderate.Turn off the Lights inside the cleaning light and remove the bulb.

2. Inside the Wall lights, when cleaning the bulb, first turn off the Lights, and you can remove the Light bulb and wipe it separately when wiping.If you clean it directly on the lamp, do not rotate the Light bulb in clockwise to avoid tightly peeling the lamp head.

How to clean different material wall lamps

1. Cloth lampshade

Wash the fabric lampshade with a soft brush, you can remove the fabric lampshade, and stick to the cleaning agent with a lower concentration on the soft brush, and then scrub the dust on the fabric lampshade. This method is not only simple, but also the wall lampshade.No damage.

2. fruits glass lampshade

Use a soft cloth suitable for cleaning the glass, be careful of the lampshade of the wall, or scrub it with a soft cloth dipped with a toothpaste. You can use a soft cloth to wrap chopsticks or toothpicks.

3. Resin lampshade

It can be cleaned with chemical fibrous tweezers or dedicated tweezers. After cleaning, anti -static spray should be sprayed, because the Wall lights of the resin material are prone to static electricity.

4. Fold lampshade

The fold lampshade Wall lamp can be scrubbed with a cotton swab dipped in water. If it is particularly dirty, a neutral cleaner can be used.

5. crystal beaded lampshade

crystal beaded wall lamps are delicate and exquisite, and clean is very troublesome.If the lampshade is made of crystal beads and metals, it can be cleaned directly with neutral detergent.After cleaning, dry the surface of the surface and let it dry naturally.

Wall lamp maintenance method

1. The wall installed on the wall is to pay attention to whether there is a water seepage to avoid the Wall lights from falling off.Do not frequently switch when used to avoid affecting the service life of the Wall lamp.

2. Frequent switching wall lamps will greatly reduce its service life, so try to reduce the switch of the lamp when using wall lamps.

1. The advantages of the LED Solar Lamp Tube

ledThe fluorescent lamp Tube is the same as the traditional fluorescent lamp Tube in appearance, and the length is available.60cmand120cmAs well as150cmThree types, their power is respectively8WAs well as9WAs well as10WAs well as12WAs well as15WAs well as16Wand20W,and60cmThe actual power consumption of traditional fluorescent lamps is26W,,120cmThe actual power consumption of traditional fluorescent lamps is45WItemsledThe fluorescent lamp Tube only has traditional lamps40%It is an efficient and energy -saving lighting product.

advantage:

1. Environmental protection lamps to protect the earth

The traditional fluorescent lamp contains a large amount of mercury steam, and if it is crushed, it will volatilize into the atmosphere.However, the LED sunlight does not use mercury at all, and the LED products do not contain lead, which plays a role in protecting the environment.

2. Efficient conversion to reduce fever

Traditional lamps produce a large amount of thermal energy, while LED lamps are converted into light energy, which will not cause energy waste.And it will not produce the phenomenon of degradation for files.(This sentence requires professionals to adjust. LeD will also produce heat, and heat will cause LED light decay, so it is necessary to strengthen the heat dissipation function of LED lamps)

3. Quiet and comfortable, no noise

The LED lamps do not produce noise. It is the best choice for the use of precision electronic instruments.Suitable for library, office and other occasions.

4. The light is soft and protects the eyes

The traditional fluorescent lamp uses 220V AC power, so it will generate 100-120 times per second.The LED lamps directly convert the AC power to DC power, which will not produce flashing and protect the eyes.

5. No ultraviolet rays, no mosquitoes

LED lamps do not produce ultraviolet rays, so compared with traditional lamps, there are fewer mosquitoes around the lamp.The room will become cleaner and neat.

6. Voltage range: 80V -245V

The traditional fluorescent lamp is lit by the high voltage released by the rectifier, and it cannot be lit when the voltage is reduced.The LED lamps can be lit within a certain range of voltage, and the light brightness can be adjusted.

7. Save energy and live longer life

The power consumption of the LED fluorescent lamp is less than one -third of the traditional fluorescent lamp, and the life span is also 10 times that of the traditional fluorescent lamp. It can be used for a long time without replacement, reducing labor costs.It is more suitable for difficulty in replacement.

8. Strong and reliable, long -term use

The LED lamp itself uses epoxy resin instead of traditional glass, which is stronger and more reliable. Even if LED is smashed on the floor, it will not be easily damaged and can be used with confidence.

9. Simple installation

During the installation, remove the original fluorescent lamp to the LED fluorescent lamp, and remove the ballast and the ripplane.

two,LED fluorescent lamp energy saving effect

15WLEDThe brightness of the sunlight is more than the traditional40WThe sunlight is still bright,18W LEDThe fluorescent lamp is more than traditional64WThe sunlight is still bright,ledThe brightness of the sunlight is particularly softer and easier to accept.Life life5Ten thousand-8The power supply voltage of 10,000 hours isAC85V-260V (comminicateCureThere is no need to start with a gifted device, start fast, small power, no flickering, and not easy to see fatigue.It is not only super strong and energy -saving.It is one of the products developed by the National Green engineering and is the main product to replace the traditional fluorescent lamp.Low power consumption, saving60-80%Electricity is better than traditional fluorescent Tube.

three,ledfluorescent lampScope

It is suitable for most indoor lighting applications, such as family, hotels, shopping malls, office spaces, schools, parking lots, warehouses, factories, supermarkets, channels, corridors, advertising boxes and other indoor lighting.

Four, LEDLight lamp wiring diagram

1. There are two types of wiring methods for traditional fluorescent lamps: electronic zone, inductive town flow.The wiring diagram is as follows:

2. LED fluorescent lamp Tube wiring method: Remove the tingler and (or) gobinial device, and connect the fire line and the zero line to both ends of the bracket, as shown below:

installation instructions:

1. Remove the Qihui and rectifier, and connect the city's fire lines and zero lines on the left and right ends of the bracket respectively.

2. The LED lamp Tube is a built -in power supply, the G13 interface has a short -circuit state, and the interfaces of both end are consistent.

[Sanitary Mirror front light] cleaning method of maintenance common sense of bathroom mirror front lights

maintenance of the front Lights of the bathroom mirror

1. When cleaning and maintenance, be careful not to change the structure of the lamp, and do not change the components of the lamps casually. After the cleaning and maintenance is over, the lamp should be installed according to the original.

2. Wipe the lamp with a dry cloth, and pay attention to preventing the moisture invasion, so as not to occur for a long time.

3. The lamp installed in the toilet and bathroom must be equipped with a moisture -proof lampshade, otherwise it will greatly shorten the service life.

4. In addition, it is not allowed to hang items or baked clothes on the lamp.

cleaning of the front light of the bathroom mirror

1. It is best not to clean it with water. Just wipe it with a dry cloth. If you accidentally touch the water, dry it as much as possible. Do not wipe it with a wet wipe with a wet cloth immediately after the light is turned on.

2. In terms of cleaning, the lampshade of the cloth cannot be flushed. It can be used in a dry cleaner. If it is made of glass, it can be washed with water. Just wipe the skeleton of the lamp.

3. cleaning the front light of the mirror with vinegar is a good way.Pour the amount of the beer bottle cap in the half pot of water. After mixing it, soak the rag in the vinegar water, and the rag that is twisted to wipe the dust on the lamp.Because vinegar has the effect of cleaning and preventing static electricity, the lamps wiped with vinegar are not only bright but not easy to dip the dust.

4. When cleaning the light body, wipe it gently with a soft dry cotton cloth. The movement should be kept from top to bottom. Do not rub it back and forth.When cleaning the lampshade, it is advisable to use clean chicken feathers to prevent the lamp cover or deformation.