Articles in Categorys Wall lamp

[glass Wall lamp] glass Wall light installation height generally how much glass Wall lamp installation method is generally

The lamp can not only illuminate our home environment, but also can often have good decorative effects. Our common glass Wall lights are one of them.I believe that in daily life, I have seen glass Wall lights, but I do nt know how much you know about glass wall lamps?Specifically, what is it?What are the types?How should glass Wall lights be installed?What are the specific steps?If you install it in different places, do you have any attention?The following editors mainly introduce you to these issues.

1. What is the glass Wall lamp?

glass Wall lamp is auxiliary lighting decorative lamps installed on the interior wall. Generally, it is equipped with a milky glass lampshade.The power of the bulb is mostly about 15-40 watts. The light is elegant and harmonious. It can embellish the environment elegant and rich, especially the newlywed living room is particularly suitable.There are many types and styles of wall lamps, commonly common ceiling lamps, color -changing wall lamps, bedside wall lamps, mirror front wall lamps, etc.

2. What is the general height of glass Wall lamp installation?

1. General Wall lamp installation height is about 2240 to 2650mm from the ground.The installation of the bedroom Wall lights can be slightly closer to the ground, generally about 1400 to 1700mm.The distance of the Wall light protruding the wall is generally 95-400mm.

2. The height of the Wall lamp in the corridor and the corridor should be slightly more than 1.8 meters high, that is, 2.2 to 2.6m from the ground.

Third, the installation step of glass Wall lamp

1. installation location OK

Generally, the height of the Wall lamp is 1440 to 1850mm from the level of the ground, that is, between 2240 and 2650mm from the ground.The Wall lamp in the bedroom can be slightly closer to the ground, about 1400 to 1700mm.

The distance of the Wall lamp protruding the wall is about 95-400mm.

2. installation method

The installation method of the Wall lamp is relatively simple. After the position is determined, it is mainly the fixation of the Wall lamp seat. It is often used to fix the Wall lamp on the wall.

Fourth, glass Wall lamp installation method

1. bedside: The wall lamps installed here, it is best to choose the lamp head to adjust the direction, the brightness of the light should also meet the requirements of the reading.Decorative effect.

2. Before the mirror: The wall lamps installed here are generally installed above the bathroom mirror. It is best to choose the light head facing down. The style of the lamp can be considered to echo the handle of the faucet or the bathroom cabinet.

In fact, for glass Wall lights, it has a lot of types and different functions. The most prominent feature is to help us illuminate and decorate the indoor environment, and often install in our bedrooms, living rooms and other places.Many friends may be more interested in the installation of glass wall lamps. Xiaobian mainly explains the related matters of the installation of glass wall lamps, such as the precautions for installation height, steps, and installation of different locations. I believe that you can gain something after reading it.

[Wall lamp] The characteristics of the Wall lamp are the purchase strategy of the Wall lamp

1. Features of wall lamps

wall lamps are suitable for bedrooms and bathroom lighting.Commonly used two -headed magnolia wall lamps, double -headed olive wall lamps, double -headed drum -shaped wall lamps, double -headed cup wall lamps, jade pillar wall lamps, mirror front wall lamps, etc.The installation height of the Wall lamp should be not less than 1.8 meters from the ground.

2. Purchase strategy of wall lamps

The wall selection lamp mainly depends on the structure and shape. Generally, the mechanical molding is cheaper and the manual is more expensive.iron forging wall lamps, all -copper Wall lights, sheepskin Wall lights, etc. are all mid -to -high -end wall lamps, of which iron forging Wall lights are the best.In addition, there is a digital perpetual calendar wall Hanging light with lamps and paintings. This wall -mounted lamp has a lighting and decorative effect, and can be used as a calendar. It is very popular with consumers.

[Is it necessary to buy the front light of the mirror] Is the bathroom Mirror front light necessary? How to choose the front light of the bathroom mirror?

Is the Mirror front light necessary?

Because the mirrors of the bathroom cabinet are installed on the wall, the Lights in our room are installed in the middle of the roof.So when we look in the mirror, our back is facing the light, and our face will look very dim, the color is unknown, which has a great impact on our facial cleanser.With the front light of the mirror, our face will be very clear, so when installing the bathroom mirror, you should install the front light of the mirror.

In other words, the mirrors of the bathroom cabinet in the bathroom are generally fixed on the wall. The toilet Lights are generally installed in the middle of the bathroom. When the bathroom is in the mirror, the Lights are behind.It is very dark, and it is very uncomfortable when doing this facial cleaning.However, after installing the front Lights of the mirror, the face light is very clear, so it is necessary to install the front light of the mirror.

How to buy in front Lights of the mirror

1. Check whether the workmanship is safe and fine. This requires people to pay attention to details, carefully check whether there are scratches and damage, or problems with color effects. It is recommended that you choose rest assured brand products to get better protection.A perfect toilet Mirror front light not only depends on the workmanship, but also carefully detect its light source. It does not need to use scientific equipment. You only need to use the front Lights of the mirror in the dark, whether it is clear and whether the color temperature is moderate.

2. Safe first, take a closer look at the details of the front light: Consumers need to take a closer look at the light sources (lamp bile, light pipes), switches, and sockets when collecting the products of the mirror.Pick up lighting brand products in the New Year's Eve, and check the goods carefully.

Domestic products must go through the process of 3C certification and ISO9000 quality system certification. Some international brands have also obtained other countries and international security certifications. These will be marked in the product itself, packaging, or notes. These will also help you measure lamps.A standard for quality.

3. Pay attention to the consistency of the mirror headlights.The color, shape, and style of the front lamp must be equal to the momentum of indoor decoration and furniture, echoing each other.

Select the front light of the mirror, first look at its light effect, that is, the result of the light reflect of the light in the future.The front Lights of the mirror should be integrated with the overall momentum of the bathroom, either quaint, or new rhyme, or nostalgic, or avant -garde, or romantic, or they can reflect it through light and shadow photos, so that people can enjoy the beauty of the Lights.Essence

4. The core device of the front light of the bathroom mirror -the town flower. Generally, people cannot see the quality problem, but when we buy it, we must not talk about cheap and choose it.It is generally guaranteed in quality.

The Lights have been bright for a long time, and a lot of dust will be accumulated on it. If it is not clean for a long time, it will affect the lighting effect, so it should be cleaned and maintained regularly. Before cleaning, you must turn off the Lights.Wipe, pay attention to the direction, don't twist too tightly.

The lighting during the day is better, so it is not affected to sorting out your clothes in front of the mirror. If it will be affected in front of the mirror at night, because the Lights in our home are generally installed in the center of the living room, so the light is the light is the light, so the light is the light is the light, so the light is the light is the light, so the light is the light.Not enough.It is also very necessary to install a Mirror front light in front of the mirror.

Creative Wall lamp DIY wooden board making retro and romantic arrow Wall lamp

When I moved to Los Angeles for the first time, after doing a lot of money -saving flea market investigations, Mr. Lovely found that I liked one of the retro lamps.These Chinese lanterns are very popular now, and they only need to spend a few hundred yuan to buy manual replicas, but honestly, our wallet is really unbearable.So this time Mr. lovely came up and did a hand -made work of all men.

Big disclosure: In any case, I did not participate in this project.I mainly want to say, "Have fun!" After a while, I took a picture.But I obtained this tutorial from reliable news, so if you want to do one by yourself, then continue to read.

You need the following materials:

Ballical light line (to prepare a few beams)

Plywood

6 -inch thick rain -proof aluminum plate

Wiring saw

Drilling machine, screw up and 3/4 drill head

iron scissors

screw

Plutoid

Electric tape

Narut

Protective gloves

Put on your gloves!Put your splint and draw the arrow pattern you want.Mr. Lovely twice and cut it once with a thread.

Pass through the back of the arrow and twist a splint as horizontal support.The specific position of the bulb on the arrow is planned (we cut out the same size as the paper of the bulb to test, and the paper can be moved at any time).Gently make a mark with a pencil and use a 3/4 drill head to drill a hole at each mark.

Start with the twisted line of the lamp, unscrew the bulb and push the socket to the hole on the back.

Measure the size of the outside of the arrow, and cut a piece suitable for a long rainproof plate suitable for the outside of the arrow.Be careful when the board is filled with the corner.According to your familiar knowledge, tighten them at the right position and start at one end.The screw is 2-3 .

Twist the bulb in.Cut off the excess bulbs, and use upper clamps, tapes, and nuts if necessary to fix the extension line.

That's it!This is the man's work, right?And my husband hasn't sweated yet!(Lie, haha ...) But it is really simple.Now that our family has a retro atmosphere, we only spend a small part of money.What do you think of this work?Do you want to try to do one too?Haha ~

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5