The breeding method of Venus Catcher

1. Light: Flying Totics is full of light, and it takes at least 4 hours of direct light every day.The light time is insufficient, and the inner clip grows small, which may lead to the death of plants.If you lack the sun in winter, you can use a fill light.

2. Moisture: Try to use soft water such as pure water and rain. Watering with potting is more appropriate.

3. Humidity: The humidity of the breeding environment is large.You can use a large water plate to make waist water, or you can add layer of water moss to its surface soil.

4. Soil: Flying Tadao like acidic environment, the substrate is best to keep the acidity of PH3.5-5.Puts without adding Fertilizers and perlite (2: 1) or pure water moss are good matrix choices. The substrate is best to replace once every spring.

5. Temperature: The growth temperature is 15 35 , the most suitable temperature: 21 35 . If you want it to sleep, you can control the temperature to about 5 C (0-8 C).

6. Feeding: During the day, photosynthesis provides nutrients for the growth of flytrap. The insects you eat can also provide nutrients like fertilization. You can feed insects when breeding, but not too much, too frequent.It should be noted that chicken and beef are difficult to digest for them.

7. Fertilization: Put the Fertilizer directly into the matrix meetingAs a result, the death of the plant is extremely impossible to salt because the root system of insects.Fertilization should be sprayed with low concentration liquid Fertilizer on the leaves.

Venus's breeding method

1. Leaf insertion method: Flying Tottery grows strong in the late spring to early summer. Dig out the flytrap from the soil, connect the pest of the flytrap, and strip the petiole in the white petiole.Put the petiole on the cultivation medium, maintain high humidity and give sufficient light, and new buds will emerge after a few weeks.

2. Sub -method method: When the flooding tract grows out of the side buds, as long as it is large enough and has a complete root, it can be planted separately separately.

3. Flower bud method: Sometimes because of temperature difference, the flower catcher's flower buds will become a plant, and the temperature difference between day and night will induce the flower catturing flower buds into new plants.Get a new flytrap.

One, five -color plum bonsai production methods

The method of cutting can be used for breeding with five -color plum bonsai, which is generally performed in the growth season.

1. Cut a strong year of raw branches, each section of each section, inserted in the sand or vermiculite;

2. Put it under the shade shed and keep the soil and air moist;

3, about 40 to 50 days of root, can be divided into pelvis.

4. The small seedlings should be planted with a rich and fertile soil containing humus. After planting, water and Fertilizer management is strengthened to make the plant grow rapidly, the trunk hair is thick, and the excess branches and control the height of the plant should be cut in time.When the plant length is suitable, the shape can be made in size.

2. The breeding method of five -color plum and the precautions for winter

1. Provide soil: The five -color plum requirements for the soil are not high. When breeding, it can be planted into the soil where the soil, the rivers and sands, and the compost of the compost and mixed blending. Before planting the five -color plumThe roots and corruption are cut off to improve the survival rate of five -color plum.

2. Pour water: After planting the five -color plum, use a spray pot to inject water along the edge of the flowerpot, so that the soil surface is dark brown, allowing the plant to grow in a moist environment.Moose water every 3 days to maintain the humidity inside the soil.

3. Provide light: The newly planted five -color plums should be placed in a cool semi -overcast place to avoid the plants from being illuminated by strong light, and it is difficult to survive. After the five -color plum grows out of the leaf buds, it needs to be moved to the Outdoor gitness, so that the plant every day every dayAccepting 4-6 hours of light promotes the growth of the five-color plum.

4. Regular fertilization: Its flowering time is relatively long and consumes more nutrients.During the management period, you must apply diligent fertilization.During the growth period, it is best to fertilize once every half a month, and the Fertilizer can be used with thin compound Fertilizers.After the cooling, stop the Fertilizer in time and enter the room management.

5. precautions for winter

(1) The Outdoor temperature in winter is low. The cold resistance of this plant is relatively weak and cannot be placed outdoors, otherwise it will be prone to low temperature and freezing damage.

(2) If the temperature is not enough, the five -color plum will automatically enter the dormant state.During this period, water and Fertilizer demand is not high, and we must also pay attention to maintenance.

Three, pruning methods of five -color plum

1. Topping: spring is the peak growth season of five -color plum, and the speed of germination is fast.When the five -color plum grows to the height you want, you can use it to cut off, cut the top buds to promote the nutrition to more concentrated, promote the germination of the side branches, and the plant shape will become fuller.EssenceIf the branches that are treated are strong, cuttings can also be made to cultivate new plants.

2. Pruning during the growth period: The growth period is mainly to cut off dense branches to avoid excessive branches inside, which affects ventilation and light transmission. It is easy to infect pests and insect pests, and it will affect flowering.Usually find that pests and insect branches should also be cut off in time to avoid infectious bacteria.

3. Trimming during the dormant period: It is necessary to trim the five -color plum before winter. At this time, cut it again, and cut all the branches of poor growth on the plant.In this way, it can improve the cold resistance of the plant, benefit the wintering, and promote the better germination of new branches in the coming year, which is conducive to the growth and flowering in the coming year.

1. The breeding method of Xitanghua

1. Soil

The soil requirements are not strict. As long as the texture is loose, nutritious, drainage, breathable, pH value is even better.Be careful not to use alkaline soil.

2. Breeding

The large -scale cultivation method of the nursery can be sowed, and the heavy -petal varieties can be divided into or cuttings.Cuttings should be cut with hard branches in early April, and cuttings can also be cut in the rainy season in July-August. Cut the green branches and insert it into bed.Pot.

3. Light

is a environment with sufficient light. If the growth environment is too shade, it is easy to lead to poor growth in the growth of Xi Tanghua, and the branches and flowers will become thinner and small.

4, temperature

Xi Tanghua prefers a warm environment, but in the summer, the light is very strong and the temperature is very high, so you must find a way to cover it, otherwise it can easily lead to burning the leaves of Xitanghua, generally 18-25 degrees Celsius.In the middle is the most suitable for the growth of Xi Tang.

5. Water

There is no too much demand for water, and there is no need to water.Guarantee the soil in the potDon't dry.However, the temperature in summer is high and the amount of evaporation is large, which can increase the amount of watering appropriately to prevent too dry.

Second, the main points of maintenance of

1. Watering does not require too much water, and there is no need to water.Make sure that the pot is not dry.However, the temperature in summer is high and the amount of evaporation is large, which can increase the amount of watering appropriately to prevent too dry.

2. Fertilize the seasons and growth status, and apply thin liquid Fertilizer in the afternoon.Once the Fertilizer is too much, it is necessary to pour some water to dilute, so that the Fertilizer is discharged with flowing water.

3. Pruning the Tattoo branches is dense. Every 2-3 years of dormancy, 3-4 years of old branches should be removed and new branches are promoted.The residual flower branches after the flower should be cut off in time. After the winter, the disability, the diseased and insect branches, and the weak branches should be cut in time to ensure that the position of the plant is well -proportioned and beautiful.

4. The time for changing the pot to the pot is generally changed to the basin, it is best to be in spring or autumn.If you grow faster, you can change it once a year. If it is relatively cold, you can change it every three years.

Third, the problem that Ji Tanghua may have

1. Disease

The main occurrence of "yellow leaf disease".It will cause tender leaves to become yellow, and the entire leaves will eventually fall.Sulfuric acid iron sulfur solution can be poured, three to four consecutive times.In addition, you can also supplement some other Fertilizers.There are also "brown spot disease", from July to September, it can be cleaned with bacteria.

2. insect pest

There are fewer pests. Occasionally, the harm of "red spiders" and "scripts" can be sprayed.

Potted flowers Six methods

1. The residual tea is used to pour the flowers, which can keep the soil water and add nitrogen and other nutrients to the plants.However, the humidity of the flower basin should be poured in a regular basis without pouring it with the dumping tea.

2. After the deterioration milk is poured with milk, add water to pour the flowers, which is beneficial to the growth of flowers.But more water is used to make it easier to dilute.Unblocked milk should not be poured flowers, because it generates a lot of calories during fermentation, it will "burn" the root (rotten roots).

3. Pour the flowers with cold water and pour the flowers with cold water, which can make flowers and trees flowing flowers and flowers, and can promote early flowering.If it is used to pour the bamboo, it can make its branches and leaves develop horizontally, and the dwarf is dense.

4. Pour the flowers in warm water in winter and cold water. It is advisable to pour flowers with warm water.It is best to place the water in the room, and then pour it when it is similar to the temperature of the room.It is better if the water temperature can be poured when the water temperature is 35 C.

5. Put the flowers in rice water often use rice water to pour rice orlan and other flowers, which can make their branches lush and bright.

6. When there is no one in the family, people who love flowers and flowers and flowers are not at home for ten days and a half months for visiting relatives or going out. No one is poured.At this time, a plastic bag can be filled with water, pierced a small hole with a needle on the bottom of the bag, placed in a Flower pot, and the small holes are stuck to the soil, and the water will slowly leak out the wet soil.The size of the hole should be mastered so as to avoid water leakage too fast.Or put a ware full of cold water next to the Flower pot, find a wide cloth strip with better water absorption, put one end in the water water, and the other end into the Flower pot soil.Wet, the flowers do not die.

Five methods for fertilizing Potted flowers

1. Sprinkle a layer of Wheat rice granules in the Flower pot, which can promote the growth of flowers and extend the flowering period.

2. Burning eggshell Fertilizer is crushed into the Flower pot. It is a good Fertilizer, which can make the pots grow lush and the leaves are gorgeous.

3. Cooked a small amount of soybeans to be used.Wear three points for each pot of flowers and put 3-5 cooked soybeans, depth and 2-3 cm, without hurting the root of the flower, and covering the soil as usual.

4. Broke the pork bones, fish bones, etc. prepared for abandoned, and apply the bottom or basin surface of the pot.

5. Pour flowers with rice washing water.Trace elements such as nitrogen, phosphorus, and potassium in rice washing are mild Fertilizers and mild Fertilizers. It does not hurt the root of the flower.

How to prevent and control the Potted flowers

Termites and ants are very harmful to pot flowers. It is not only dry, but also destroys the root system of the plants, causing the plant to weaken the ability to absorb and transmit the plant in nutrition, water, and eventually leads to the poor potential, withered and even death of the plant.Now introduce several methods for preventing ant -harm.

Eliminate

Pen flower should be far away from the ant hole.If you find that there are ants in the pot soil, first follow the ant's crawling route to find the ant nest, and use water flooding, fire burning, spraying drugs and other methods to eliminate it.Sprinkle some lime on the crawling route of ant nests and ants to prevent the ant from harm again.

Physical control

1. When applying rotten Fertilizer to apply base Fertilizer or Organic fertilizer, it is necessary to use the Organic fertilizer that is fully fermented and rotten. Do not use raw or semi -cooked Fertilizer to avoid causing ants for ants.

2. Washing the excreta of insects such as flies, moths, aphids, mites and other insects on the leaves of the leaf surface can easily seduce ants to find food. Therefore, it is necessary to spray the leaves with water to keep it clean.At the same time, clean the ground and keep the pots of Potted flowers clean and hygienic, so as not to attract ants with odor.

3. Put the potted pots that are harmed by ants, and slowly put them in a barrel with water (the water can be flooded through the pot soil) for 30 to 60 minutes.The ants can't stand the flooding of the water, and they will crawl out of the pot soil. At this time, the ants that float on the water and crawl on the pot of the pot of the pot can be removed.

4. The garlic is peeled with garlic and smashed. These debris are buried into the pot soil.

5. The most effective way to remove the pots that have built nests at the root is to turn the pot in the pool and destroy all the ants.Then clean the roots of the plant and plant pot flowers with new pots of sterilization.

Chemical prevention

1. Before the potting of potting soil, before the upper or over the basin, the pot soil is disinfected with 40%Forma, 65%Daisen zinc powder, and 50%multi -bacterial pink powder, etc., killing the termite in the pot soil, and the termites in the pot soilAnt and its eggs.

2. Burted the soil with 50%of the enemy's wettable powder and the fine soil with 50 sieves and mix well to make the medicine soil, and then bury the medicine soil into the pot soil to eliminate the ants.

3. Plutiny solution should not be turned over the basin, the effect of buried soil is not obvious and severely damaged, or the ants that have built nests in the pot soil.Under 1000 grams, or mix 40%of the pistachio emulsion with 1000 grams of water, 5 to 10 grams of pyramids, pour the medicinal solution into the pot soil and ants, and then seal the entire Flower pot with a plastic bag for 12 hours.Kill all the ants.

The breeding method and precautions of rich coconuts

1. Soil

Four wealthy coconuts should choose loose and fertile, fertile, drainable, and breathable sandy soil. Choose a larger Flower pot, because the roots of the plants are relatively developed.A small amount of nutrient solution is applied to the soil, which can promote the growth and development of plants, and the plant growth is stronger.

2. Temperature

Rich coconuts like to grow in a warm environment, moist, and grow strong in the semi -shade environment.The best growth is between 15 and 25 C, and the maximum cannot exceed 32 C, otherwise the leaves will wither.In winter, we must pay attention to the temperature in the room must be above zero degrees, otherwise the rich coconut will be frostbite or even frozen to death.

3. Watering

To ensure sufficient water supply during the strong growth season of wealthy coconuts, it should be watered once in about 1-3 days to see the pot soil. If the pot soil is too dry, it should be watered immediately.Wet, you can wait for watering. Too much watering can easily cause water to fail to evaporate normally and cause the plant rotten roots.

4. Light

The growth of rich coconuts requires appropriate light, which can promote its leaves more shiny and weaker. The leaves in the shelter environment for a long time are easy to yellow, and the branches are easy to soften.Choose a Shading net or move it to the midnight environment for maintenance.

5. Fertilization

Fugui coconuts have less demand for Fertilizer. You only need to apply liquid Fertilizer 1 to 2 times a month during the growth period. In the end of autumn and winter, you should apply less Fertilizer or not fertilize.The thick Fertilizer should be performed in a small amount of many times, otherwise the branches and leaves of the rich coconut will be burned.

6. Pruning

The growth of rich coconuts is very strong, so in order to allow the wealthy coconut to get more nutrition every branch and leaves, when weeding during the growth period, all the dead branches and sick branches on the branches are cut off.Tool, cut the cuttings for cuttings.

7. Pests and insect pests

Garcus pests are natural enemies of rich coconuts. The diseased spots of rich coconut leaves not only affect the beauty, but also easily cause the wealthy coconut to wither. ThereforeSpray.

8. Change pot

The adaptability of a wealthy coconut is average. It is easy to affect the growth of the root system for a long time without changing pots. It is best to change the pots every two years. When changing the pot, you need to trim the roots.It should be kept slightly dry.