1. What is the carbon machine equipment

The charcoal machine is the raw materials such as bamboo and wooden sawdust, Peanut shell, corn stick and other raw materialsCrushed into a granular shape within 10mm through the wood chips crusher. After drying the dryer, put it in a carbonized furnace for charcoal machine. The full set of equipment of the charcoal machine includes a pieces, a dryer, a stick maker, a charcoal furnace, conveying, and conveying.Planet and other.charcoal mechanismcharcoalIt is a kind of waste renewable energy fuel, smoke -free and non -toxic, clean and hygienic, which can be widely used in the field of home heating and barbecue food; industrial aspects can also replace coal or heavy oil -boiled steam boilers.crystal silicon and other materials; agriculture can also be used to improve ground temperature and improve the soil.

2. What is the working principle of charcoal charcoal machine

The charcoal mechanism uses some waste, such as branches, straw, straw, Peanut shell, tree trunk, cotton straw, tea seed shells, fruit shells, weeds, leaves, etc. These substances contain biomass fiber that can produce charcoal.It was crushed to a powder below 10mm by the pieces, and then dried 88 % of the water through the dryer. After the entry rod machine was put in a carbonization furnace for carbonization through high temperature and high -pressure molding, and finally transported the finished mechanism of charcoal by the conveyor.

3. How much is a charcoal machine equipment?

The price of charcoal machines should be calculated to calculate the price of a full set of equipment, including crushing machines, dryers, roders, carbonized furnaces, conveyor:

1. The price of the pieces is relatively low. Generally, the crushing machines equipped with the charcoal machine are small pieces. Generally, it is about 56,000 yuan.Select the size of the raw material.

2. The rod machine is an indispensable core component of the charcoal machine, so it cannot be saved in this regard. The price of the rod machine ranges from more than two to 20,000.

3. The dryers equipped with small charcoal machines are generally air -flow dryers. The price is similar to the stick maker. When selecting, the machine should be selected according to the quality and price of the machine.

4. High efficiency of carbonization furnaces. The use of distilled carbonization method can collect wooden gas and wood scorched oil generated during the carbonization process and return to the furnace to reduce carbonization flue gas. Due to the high production cost of carbonized furnaces, the market quotation is compared to compare the market quotation.Chaos, from 20,000 to 100,000, the specific price should be determined according to performance and product quality.

5. The conveyor is a device that connects the machine to transport raw materials and finished charcoal. The rubber transportation or spiral transportation can be used. The price of the conveyor is generally not expensive. It is about 700 yuan per meter.

In summary, the price of the full set of charcoal equipment is about 50,000 to 80,000 yuan. If you buy a full set of equipment, you generally make a discount on the basic equipment quotation, which is cheaper than buying alone.

1. Is white charcoal charcoal?

Carbon is a collective name for charcoal products. It usually includes four categories: white charcoal, black charcoal, activated carbon, and mechanism charcoal. White charcoal is also a type of charcoal. As early as Qin and Han, white charcoal had appeared in China.The fuel is used for smelting iron weapons, which can melt the fuel that can melt steel.

2. What is the difference between white charcoal and ordinary charcoal

White charcoal is also called white charcoal, which belongs to charcoal products, but compared with ordinary charcoal, white charcoal is different:

1. Different carbonized temperature

White charcoal is a high -temperature charcoal. The carbon with a carbonized temperature of 700 C is called high -temperature charcoal, while the carbonization temperature of white charcoal is as high as 2000 C.

2. Burning temperature is different

When the white charcoal is burning, the temperature can reach about 1000 C, which is much higher than the 500 C of ordinary charcoal.

3. Different combustion effects

After high -temperature refined white charcoal, it has the combustion effect of smoke -free and fire, and ordinary charcoal dripping oil will fire.

4. Different sources of raw materials

Ordinary charcoal can be made with any wooden raw materials, and the mechanism can even use agricultural and forestry waste; white charcoal needs to use hard wood.

5. Different market prices

The price of white charcoal is much more expensive than ordinary charcoal. Ordinary charcoal is generally one yuan to a few dollars a pound, while the price of white charcoal is about 2-10 yuan per catty, and the expensive is even more than ten yuan per catty.

What is white charcoal?

White charcoal is a technology of firing charcoal. In addition to the different firing method and ordinary charcoal, the differences in raw materials will also affect the quality of white charcoal. Not all wood can be fired white charcoal.

Generally speaking, the raw materials of white carbon must have at least 0.8 wood. Ordinary fruit wood and birch can also be fired.If you want to burn high -quality white charcoal, you still need to use the tree of Tochigi. Commonly used such as Wugang Masa, Qinggang , and other ingredients such as .

1. Is the mechanism charcoal toxic?

Mechanism charcoal is also known as mechanical charcoal. As the name suggests, it is the charcoal made of machinery, and it is also known as the charcoal. It is a charcoal rod -shaped material squeezed by wood fragmentation. Many friends are worried that the mechanism charcoal is toxic. So is this true?

The mechanism charcoal itself is non -toxic, but it will produce toxic carbon monoxide under incomplete combustion.

In fact, whether it is mechanical charcoal or traditional charcoal, because they are the essence of carbon elements. When burning, if the space is closed, carbon monoxide may be generated because of incomplete combustion.Cause indoor personnel poisoning.

2. Will the mechanical charcoal generated carbon monoxide?

Will the mechanism produce carbon monoxide when burning? Depending on the situation:

1. If the indoor combustion mechanism is carbon, the indoor space is closed, the air does not circulate, and the oxygen is insufficient, the mechanism charcoal will produce carbon monoxide when burning.

2. For Outdoor, the mechanism charcoal is generally completely burned, which produces normal carbon dioxide. Even if there is a small amount of carbon monoxide, because it is outdoors, there is no need to worry about carbon monoxide poisoning.

3. Will the mechanism charcoal smoke?

No.

Compared with traditional charcoal, the advantages of the mechanism of charcoal are smoke -free. The content of charcoal fixing charcoal is high, about 80 %, burning without flameless, smoke -free and charcoal heads.%Or 6%, there is basically no ash after burning, it is a very useful charcoal.

1. What does black charcoal mean?

Black charcoal is a type of charcoal. It is commonly known as charcoal, also known as the earth kiln charcoal. It is a type of high -aromatization substance caused by fossil fuel and biomass under hypoxic conditions.The wood ash falling in white powder is therefore called black charcoal.

The composition of Black Carbon is affected by the thickness of the raw material, temperature increase, and burning temperature of the raw material (predecessor).The stable black charcoal is mainly based on the aromatherapy family as the skeleton, and there are also aliphed chain structures.

As a fuel, the advantages of black charcoal are flawless and low price, but there are also disadvantages such as explosive explosion, impatient burning, and smoke when burning.Health is harmful, so fewer and fewer.

Second, the source of the black carbon

Black charcoal is a carbon -containing particle with a highly aromatic structure generated by the incomplete combustion of fossil fuel and biomass. The main source of raw materials is soft broad -leaved salary charcoal. Due to the different tree species, it can be divided into tea ceremony charcoal, branches and other cheap cheap cheap.Civilian black charcoal.

Tea ceremony charcoal and branches are mainly produced in the three northeast provinces with abundant forest resources. They use beylum as raw materials, which are very particular about the firing process and selection.Wait for wood as raw materials.

3. Does black charcoal affect the environment?

The black carbon particles formed in the atmosphere of black carbon particles caused by black carbon burning, which has a certain impact on the environment. These nanometer -scale black carbon particles can not only spread with the atmosphere, cause respiratory diseases, but also can be wet and wet in the atmosphere.Enter the water body and soil environment under the action of settlement, which will affect the migration and transformation of pollutants in water and soil.

In addition, black charcoal also has a certain favorable impact on the environment. Studies have shown that the adsorption of black carbon plays an important role in the adsorption of organic pollutants in the soil, which can enhance the ability to adsorb soil on sulfidine.A strong adsorption of affinity, in the soil, has a good adsorption ability for sulfa metharomodolzol, pentahenol, etc. in the soil; in addition, the black charcoal entering the soil will have a certain interface effect with humic acid, thereby forming blackThe composite of carbon humic acid, the impact and mechanism of this complex against the migration and transformation of the environment in the environment are unknown.

1. What procedures do you need to go through the charcoal processing plant

The production and processing of charcoal is completed in the charcoal processing plant. If you want to open a charcoal processing plant, there are many procedures that need to be completed, including:

1. After the application is submitted, the local township government is responsible for the preliminary examination and conducts planning approval.

2. The Municipal Environmental Protection Bureau conducts environmental impact evaluation.

3. Apply to the Municipal Land and Resources Bureau to issue a temporary land permit.

4. Apply for a charcoal business license to the forestry department.

5. Go to the Municipal Bureau of Industry and Commerce to apply for a business license.

6. Go to the Municipal State Taxation Bureau and the Local Taxation Bureau to register tax registration in accordance with the business license.

2. What are the charcoal processing equipment

In addition to the preparation of the carbon processing plant, in addition to the procedures, the processing equipment must be considered. So what are the charcoal processing equipment?

1. If it is charcoal, the main processing equipment include fragmented machines, dryers, rod machines, carbonized furnaces, etc.

2. If the original charcoal is produced, the raw material cutting machine and transportation device are needed. Carbonization mainly depends on charcoal kiln.

In fact, the production of charcoal machines is only auxiliary equipment, which mainly depends on the types and quality of the production of charcoal. Different charcoal techniques and processes are required. With experience and carbonization technology, machinery and equipment are secondary.

3. How about charcoal processing prospects

You must know how the industry prospects for charcoal processing are first to understand the market demand of charcoal. Now the use of charcoal uses is very broad. It is widely used in industry, agriculture, life, and food. The demand for charcoal is still relatively large.

As for the profit, charcoal processing mainly uses the corners and waste processing of wood. If there is a suitable way to recycle raw materials, the price is relatively good, and the profit is relatively easy.

However, it should be noted that under the requirements of environmental protection, the processing and production of the original charcoal no longer advocates or even crack down. The carbon processing plant is mainly the production processing mechanism charcoal.