Articles in Categorys Balcony Garden

1. The breeding method of Xitanghua

1. Soil

The soil requirements are not strict. As long as the texture is loose, nutritious, drainage, breathable, pH value is even better.Be careful not to use alkaline soil.

2. Breeding

The large -scale cultivation method of the nursery can be sowed, and the heavy -petal varieties can be divided into or cuttings.Cuttings should be cut with hard branches in early April, and cuttings can also be cut in the rainy season in July-August. Cut the green branches and insert it into bed.Pot.

3. Light

is a environment with sufficient light. If the growth environment is too shade, it is easy to lead to poor growth in the growth of Xi Tanghua, and the branches and flowers will become thinner and small.

4, temperature

Xi Tanghua prefers a warm environment, but in the summer, the light is very strong and the temperature is very high, so you must find a way to cover it, otherwise it can easily lead to burning the leaves of Xitanghua, generally 18-25 degrees Celsius.In the middle is the most suitable for the growth of Xi Tang.

5. Water

There is no too much demand for water, and there is no need to water.Guarantee the soil in the potDon't dry.However, the temperature in summer is high and the amount of evaporation is large, which can increase the amount of watering appropriately to prevent too dry.

Second, the main points of maintenance of

1. Watering does not require too much water, and there is no need to water.Make sure that the pot is not dry.However, the temperature in summer is high and the amount of evaporation is large, which can increase the amount of watering appropriately to prevent too dry.

2. Fertilize the seasons and growth status, and apply thin liquid Fertilizer in the afternoon.Once the Fertilizer is too much, it is necessary to pour some water to dilute, so that the Fertilizer is discharged with flowing water.

3. Pruning the Tattoo branches is dense. Every 2-3 years of dormancy, 3-4 years of old branches should be removed and new branches are promoted.The residual flower branches after the flower should be cut off in time. After the winter, the disability, the diseased and insect branches, and the weak branches should be cut in time to ensure that the position of the plant is well -proportioned and beautiful.

4. The time for changing the pot to the pot is generally changed to the basin, it is best to be in spring or autumn.If you grow faster, you can change it once a year. If it is relatively cold, you can change it every three years.

Third, the problem that Ji Tanghua may have

1. Disease

The main occurrence of "yellow leaf disease".It will cause tender leaves to become yellow, and the entire leaves will eventually fall.Sulfuric acid iron sulfur solution can be poured, three to four consecutive times.In addition, you can also supplement some other Fertilizers.There are also "brown spot disease", from July to September, it can be cleaned with bacteria.

2. insect pest

There are fewer pests. Occasionally, the harm of "red spiders" and "scripts" can be sprayed.

[Tobacco -free barbecue machine] The use of smoke -free barbecue machine for smoke -free barbecue machine maintenance strategy

Smokeless barbecue machine

Smokeless barbecue machine is a barbecue equipment.Can be used for lamb skewers, barbecue, etc.Equipment for barbecue restaurants and barbecue stalls in almost every city in China.

Smoke -free grilling machines are divided into charcoal barbecue machines, gas barbecue, electric barbecue, automatic barbecue and microwave barbecue machine and automatic rabbit machine.

Smokeless barbecue machineUse

1. Check whether it can be connected to the canned liquefied petroleum gas pipeline and whether it is connected to it before using it.

2. Collect the basin to the oil and pour in proper water to maintain a certain amount of water and prevent dryness.If the water is dry, take out the chassis of the machine, and then add the water

3. Open the gas general valve, then turn on the red switch on the right side of the baked machine, and unscrew the left, lit the ceramic plate with the fireware, and turn on the baking fans.

4. Once -ignited confirmation: When igniting the ceramic plate, a bouquet of flames can be seen on the burning plate and ignited the entire burning board.If there is no light blue flame on the ceramic plate, this is not ignited, please ignite until it ignits.The surface of the burning plate can be seen at the beginning. After about 1 minute, the flame gradually retreated, manifested as ignorance and red hair.

5. After use, the total switch of the gas source and the ignition switch should be turned off.

maintenance strategy of smoke -free grilling machine

1. When cleaning and maintenance, the electronic ignition switch should be turned off to prevent accidents.

2. When cleaning, the oil can be collected and cleaned out and cleaned, and the surface of the body can be wiped with a wet towel.

3. After barbecue for a long time, food debris is easy to accumulate. Pay attention to cleaning the performance of the burning board to avoid blocking. You can use steel needles to regularly check whether the micro -pores of the ceramic burning board are blocked.

4. Avoid cleaning the head of the machine with water to affect the life of the head of the machine.

1. How long is the life of Solar street lights

As an environmentally friendly and energy -saving street light, Solar street lights are more concerned about the service life. So how long can Solar street lights be used?

Generally speaking, the life of Solar street lights is related to its accessories. The accessories of Solar street lights mainly include Solar panels, controllers, batteries, light sources, and light rods. The service life of different accessories will be different:

1. The service life of Solar panels is more than 20 years. After 20 years, Solar panels only have a certain light aging (about 30%), but it can be continued.

2. Then the controller, the general service life is about 8-10 years, depending on the original electronic original and use environment.

3. Next is a battery. In the past, Solar street lights generally use lead -acid colloid batteries. The service life of this battery is about 3 years. Generally, lead -acid batteries that are about to years may be very serious.If you can't meet it, you can't meet the demand for lighting.And now the battery is mostly used in lithium batteries. The high -low temperature attributes of lithium batteries are better than lead -acid colloid batteries. The number of cycles is more than lead -acid colloid batteries. The deep discharge energy is more than 2,000 times.More than 5 years.

4. In terms of light sources, the current Solar street lights are LED light sources. The good LED light source life can reach more than 11 years.

5. The service life of the light rod is relatively long. If it is used with hot -dip galvanized and rust -proof measures, the life span can be more than 20 years.

In summary, the main factor restricting the life of Solar street lights is the battery. Under normal circumstances, the life span of Solar street lights is 5-8 years, but most accessories can be used normally. Just replace the battery.

2. How to extend the life of Solar street lights

solar energy is a kind of green renewable energy, and it is also more energy -saving. Now many places use Solar street lights.The use of Solar street lights is limited. If you want to extend your life, the main point is to pay attention to the following points:

1. Use high -quality Solar panels

The main function of Solar panels is to collect light sources and convert light energy to electrical energy. The life of the Solar panels produced by regular manufacturers is relatively long. When buying, you should pay attention to the purchase of products with guaranteed quality.

2. Choose a light source with good heat dissipation

There are two positions that require heat dissipation in Solar street lights, one is the head of the lamp, and the other is the battery.Solar street lamps are generally used for LED lamp heads. We should buy a good cooling function lamp, so as to extend the life of LED lamp beads.

3. Use high -quality batteries

The battery is a strong backing of Solar street lights. If the battery life is not long, the service life of Solar street lights will not be long.Generally speaking, it is best to heat the heat dissipation effect that the lithium battery with aluminum -magnesium alloy shell has long life, fast heat dissipation, and the quality is very guaranteed.

4. Choose the right Solar street light controller

Solar street light controller is a central nervous system in the Solar lighting system, which is responsible for coordinating the work of Solar panels, lithium batteries and loads.It is the key component of the Solar street light lighting system. We must not be greedy for cheap controllers. It is recommended to choose a reputable manufacturer and buy a controller with a qualified certificate.

5. The process processing of the light rod

Solar street lights are mainly supported by light rods. The service life of the street light rod depends entirely on what kind of galvanized use. Cold galvanized Lights will rust after 1-2 months outdoors.Hidden dangers; good Solar street lights are hot -dip galvanized, and the service life can reach 20 years.

How to renovate the old rattan chair

It depends on the depreciation of the rattan chair. If it is only old in appearance and the structure is not hindrance, it is recommended to brush a new layer of new paint. The step is to clean and dry it, then use sandpaper to polish its outer rattan frame to stain the Skin and restore the epidermis and recoverSmooth, and then protect the optical oil. After using it for a period of time, wipe the vine ware with light saline, which can not only stain and make it flexible and lasting.It plays a very important effect.If the rattan itself is broken and broken, you must go to the rattan shop and find someone to repair it.

What are the main points of the rattan chair to clean and maintain

The shape of the vine chair is beautiful and novel, and the handmade skills are exquisite.However, it will still appear dirty after using it for a long time, so in the usual vine chair maintenance, pay attention to cleaning problems.First of all, we can use some light saline to wipe the vine chair to achieve the effect of pollution.For us, the ash on the rattan chair is a difficult problem in cleaning. It doesn't matter. Xiaobian is here for you.For the dust treatment during the maintenance of the rattan chair, we can wipe it with a soft wet cloth. If the dust between the seams of the rattan chair, we can use a paint brush or a vacuum cleaner to clean it. Do not wipe the rattan chair with a cleaner or solvent.Come to clean, so as not to lose elasticity and gloss in the vine chair.Finally, the cleaning of the rattan chair should be remembered. After wiping it with a wet cloth, dry it with a dry cloth, because the rattan chair is equivalent to woody easy moisture. Pay attention to the maintenance of the rattan chair.

Keep ventilation.The cross section of the rattan chair is covered with fine catheter, so the vine chair can absorb a certain amount of water. If these moisture reaches a certain degree, it will appear soft, loose structure, and drooping planes, and it will be prone to mildew.Therefore, in the cleaning of the rattan chair, remember to dry it with a dry cloth.Secondly, the maintenance ventilation of rattan chairs is also critical, especially in the south of the rainy season, the maintenance ventilation in the maintenance of rattan chairs is particularly important.After cleaning the rattan chair, if we feel that it is very troublesome to dry it with a dry cloth, we can also move the rattan chair to a place with a church to blow off the air.The opposite effect leads to deformation and even break.

Five types of decontamination method cleaning rattan furniture

1, Soap Discovering Method

You can cut the hard hair of the paint brush into a small brush, and you can remove the dirt in the furniture with them.Vine furniture should be used for drying the furniture for one day, one or two nights after cleaning.

The tea is dirty, and the painted furniture is contaminated with dust. It can be wiped with wet tea residue wrapped in gauze, or scrubbing with cold tea, which will make the furniture particularly Smooth and bright.

2, Milk Discovering Method

Use a clean rag to soak in the milk that cannot be drunk in the expiration, and then wipe the tables such as the table with a rag to remove the effect of dirt, and finally wipe it with water.

3, Lemon Discovering Method

If the wooden furniture is scalded by the match, you can wipe it with half lemon first, and then wipe it with a soft cloth immersed in the hot water.Finally, use the dry soft cloth to quickly dry and brighten it to recover as early as the beginning.

4Plane pollution method

Wipe the surface of the furniture with the equal amount of white wax and hot water phase, and then rub it with a soft cloth.

5, Salt water pollution method

The accumulation of rattan furniture has a long period of time, which not only affects the appearance, but also is not hygienic, but it cannot be washed with ordinary detergent to avoid damage to the rattan bar.

How to clean and maintain vine art furniture

1Roney furniture cleaning

(1) After long -term use of rattan furniture, rattan furniture usually becomes dirty or ash, at this time, it needs to be cleaned.When cleaning rattan furniture, use less water.You can use a clean cloth dipped in water for cleaningThen, then

(2) If you use light salinede1The effect will be better. Fresh salt water can not only remove the bacteria on the rattan furniture, but also keep it more flexible for a longer longer, prevent it from becoming crispy, or be worm.

(3) In addition, some subtle places and gaps can use toothbrushes, wicker and other fine hairs to eliminate storage dirt in the gap.

2, Avoid direct sunlight in the sun

(1) Tengyi family has a lot of pores, and rattan furniture is the most afraid of benefits. Pay attention to avoid the key such as the key to hurt the furniture.

(2) The best way to maintain rattan furniture is often sitting and often sitting. Frequent use will not only give vicissitudes of vicissitudes of vicissitudes of vicissitudes, but also help maintain the toughness of rattan materials.

(3) When using and stored rattan furniture, avoid contact with the source of the fire, the heat source, and do not place it under the sun for a long time.

(4) Protonous rattan furniture refurbishment method, clean and dry first, then use sandpaper to polish its outer rattan frame, make the epidermis dirt and return to Smooth, and then protect the light oil.

3Put the level of anti -deformed level

(1) When storage and use, try to place it in a flat place on the ground, so that the four legs of rattan furniture are safely and smoothly. If it is placed on the ground, the furniture often shakes, which will affect the service life of the furniture.

(2When using and storage, try not to be exposed to the sun, approach the supply, or high temperature objects and places, otherwise it will cause problems such as deformation, burn, cracking and so on.

4, To buy rattan furniture points

(1) Buy rattan furniture first starting from the material of the rattan, check the thickness of the rattan materials for making furniture, usually choose furniture made of rattan with thick and uniform and uniform mixed color.

(2) The inferior vine is thinner, small toughness, low tensile force, and low tensile power. The furniture of furniture is weak. The important ability is weak. You need to pay special attention to whether the position of the position has a rough or uneven feeling.

(3) The rattan material made of rattan furniture is refined by high -temperature steaming and standard production technology. The rattan rod requires the consistent thickness and uniform color; then check whether the overall color of the rattan furniture is consistent, whether the binding part is stable, whether the appearance is correct; When buying, pay attention to the treatment of rattan fiber. Whether the surface of the rattan material is Smooth and delicate, and protect the paint.

5, Rattan art furniture moisture -proof treatment

(1) Wide vines must prevent moisture. When rattan furniture is moisture, it will cause wood to decay. Metal type accessories will rust, the adhesive part is dehydrated, and so on.

(2) You must prepare for the prevention of moisture. Do not use water to clean the vine furniture. Do nt clean it with alkaline water. You can use a wet cloth to wipe it. Do nt rinse it with water. If you unfortunately wet the rattan furniture, find a way to air dry as soon as possible is the best choice!

What are the characteristics of Chinese wall lamps and European -style wall lamps in the style of wall lamps?

1. Classification of Wall lamp style

Rural Wall lamp: The rural style Wall lights have complemented simplicity and nobleness. Reasonable use can make the entire family space reflect a strong humanistic atmosphere and make the room very charm.

European -style Wall lamp: European -style wall lamps are often represented by decorative applications in the British royal family. They originated in the 1980s and entered China in the 1990s.In the decoration of hotels, villas and other decorative workers to highlight the European style of graceful and luxurious aristocracy.

Chinese Wall lamp:The traditional Chinese carved design and production were adopted, and exquisite carving was carried out on solid wood. The color was mainly dark.

Modern Wall lamp: Modern style is fashionable and full of personality. The design of modern wall lamps is no exception. It will use various bright flower elements to decorate the spring bedroom and decorate a elegant arc modern Wall lamp on the bedside to make the modern Wall lamp, so thatIt makes the bedroom of Kasuga more elegant and romantic.

crystal Wall lights: Among the family of modern years, most people like crystal wall lamps when buying Lights. It adds a hint of aura with simple home space. Of course, the bright and gorgeous crystals often give people a grand and luxurious.Visual feeling.

2. How to buy Wall lights

1. Buy the quality of lampshade

When buying wall lamps, you must first look at the quality of the lamp itself.Usually, the lampshade is made of glass, and its bracket is made of metal.The quality of the lampshade depends on whether the light transmission is appropriate, and whether the pattern is echoed with the overall style.Of course, whether the metal's corrosion resistance is good, whether the color and luster are full and beautiful, etc., will be an important indicator for checking the quality before purchasing.

2. Choice of the brightness of the Wall light light

Generally speaking, the light of home space is better, and its degree is less than 60W.Of course, the choice of Wall lights needs to be selected according to the needs of installation. If the room is large, you need to use a thicker Wall lamp with a double head, and the small room is thinner with a thinner head.At this time, it is worth noting that in the purchase of wall lamps, in order to prevent the wallpaper from igniting the wallpaper and cause danger, it is best to choose a Wall lamp with a protective cover.

Third, precautions for the purchase of wall lamps

The choice of wall lamps needs to be coordinated with the installation site; the color of the color and the installation wall is coordinated;

The power of the Wall lights should be consistent with the purpose of use; the installation height is slightly higher than the head.

There are several types of wall lamps, and each Wall lamp has its own characteristics. When buying wall lamps, you must also choose according to the style of your home, and try to avoid the sense of discord.